Need help in web dispatcher settings for redirect

Hello All!
I need to redirect users from one URL (http://webdispatch:port1/abc/efg) to another (http://host2:port2/abc/efg) but URL in browser must stay unchanged (http://webdispatch:port1/abc/efg) after redirect. As I think server should get requested URL from browser, internally redirect to URL #2 and send response of URL #2 to browser.
I've set up Web Dispatcher for redirecting by using parameter icm/HTTP/redirect_0, but now URL in browser is changing with http://host2:port2/abc/efg
icm/HTTP/redirect_0 = PREFIX=/,FOR=webdispatch:,FROM=/sap/bc/webdynpro/sap/zwd_rep,HOST=host2,PORT=port2
How I can do it?
Helpful answers will be appreciated
Regards, Lev

Thanks for your replies.
I've tried to comment wdisp/permission_table parameter but it had no effect. And it seems that I've made a mistake: I forgot to comment icm/HTTP/redirect_0 while tested work of icr file.
I have:
web dispatcher at webdisp_host:1090
host with ABAP+Java instance at inst_host
icm/HTTP/redirect_0 commented
use icr file:
>Version 1.0
>SYS
>J2EE crmdev.oao.sng 8010 DIA=2
At inst_host I has two apps:
/b2b_sng/ ( inst_host:50000/b2b_sng/ )
and /sap/bc/* ( inst_host:8010/sap/bc/webdynpro/* )
webdisp_host:1090/b2b_sng/ works fine.
webdisp_host:1090/sap/bc/webdynpro/* don't work:
500 Dispatching Error
Error:     -26
Version:     7000
Component:     HTTP_ROUTE
Date/Time:     Mon Dec 01 17:41:24 2008
Module:     http_route.c
Line:     3121
Server:     crmdev_WDC_30
Error Tag:
Detail:     no valid destination server available for '!ALL' rc=13
Slava,
> 8010 is probably an HTTP message server port.
I think no since inst_host:8010/sap/bc/webdynpro/* working fine.
Parameters
> rdisp/mshost = crmdev.oao.sng
> ms/http_port = 8010
has been already added into profile, but http_port = 8101 instead 8010

Similar Messages

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

I need help: Canon HF S10 settings for Final Cut

Hello, i am a German guy, so i am sorry that my english is not very well.
I got the Canon HF S 10 from Japan, so its an NTSC one. For Cutting i am using Final Cut Pro. I want to produce online Videos in the best possible Quality.
My Problem is, that i dont know witch settings i should take for best Quality.I already tryed much. The Quality is good if i dont move the camera. If i move it the Video becames very bad Quality.
The Cam has these possibilitys:
Frame Rate: 60i (Standard), PF30, PF24.
24Mbps (MXP), 17Mbps (FXP), 12Mbps XP+,7Mbps (SP), 5Mbps (LP)
I dont know with import Settings i should use for Final Cut.
Could you please help me to find the right settings?
Thanks alot

I tryed it, but there is no besser result. Could you maybe help me again? If i import from my hdd cam, i just need to put the Final Cut Settings for the Sequenz right? There i put ProRes 1920 x 1080i60.
I push import and it opens the window to import my files. There are also settings on the top:
P2 Plugin
P2 AVC-Intra - Nativ
AVCHD Pugin
AVCHD - Apple ProRes 422 (HQ)
AC - 3 Audio - Matrix Stereo
Is that all right?

"it's always DNS" - Need Help setting network/DNS settings for MacMini Serv

Well, I must admit defeat and ask for help. I've set up an Xsan or 2, but for the life of me cannot set up my mac mini server. My basic two problems seem to be these:
1) Service Order in System Preferences/Network
I want to run my private LAN through Ethernet, using a 10.1.17. IP range, and use my Airport Extreme Base Station (Technically a Time Capsule) for the Public ISP 192.168.1 DHCP service. Cannot get both to work. The only way I can get the server to work and to be able to login using Open Directory is to either set the Ethernet as Primary for both my client and server, in which case there is no internet service AT ALL for either. I have a sneaking suspicion it has something to do with either DNS or a few extra DNS entries in the ethernet or airport categories, but for the life of me I cannot find the right combination. Is there any way to have BOTH Ethernet LAN and Airport internet service?
2) Related to the first question, I think, is that my local FQDN (not registered, just meant for internal LAN use only right now) and DNS name only show up to my client computer in Server Admin, Directory Utility, Workgroup Manager if I DISABLE my airport card. Otherwise, they come up as <servername>.local and not the FQDN <servername>.editdog.com, and I cannot login using OD.
3) I'm not sure what happend to the Binding I used to have to do in OSX Server 10.5, but maybe that's the issue? I have the Peachpit OSX Server Essentials Book, and it's been less than helpful.
Any ideas out there?

bump

Need help with correct email settings for several devices and Gmail

My work email is set up on my 2 macs in mac mail with the IMAP setting. I also have my email routed to gmail. How can I set up my email so they download to all 3 locations without them disappearing or rerouting after I read them? Currently, if I open an email on one device, it typically disappears and the eventual locaiton tends to be gmail where they stay forever. This morning, one of my devices got an email I was waiting for, and the other did not.

My work email is set up on my 2 macs in mac mail with the IMAP setting. I also have my email routed to gmail. How can I set up my email so they download to all 3 locations without them disappearing or rerouting after I read them? Currently, if I open an email on one device, it typically disappears and the eventual locaiton tends to be gmail where they stay forever. This morning, one of my devices got an email I was waiting for, and the other did not.

Need help with best render settings for project

Hi everyone,
I am completely new to after effects and premiere.
1. I am working on a premiere project with 1440 x 1080 mpeg2 footage from a Sony hdr-fx1000, in my premiere project my sequence settings are HDV 1080i30 (60i).
2. I export a clip with under these same settings.
3. I open a new composition in after effects with the following settings: preset: HDV 1080 29.97 (same as footage)
4. I time stretch using pixel motion
5. What are the best render settings and output module settings to use if I want to import the modified clip back into my premiere project?
PS I've been trying to output to mpeg2 but when i check the properties on the clip it says .mv2 and it looks choppy.
Thanks in advance!

BTW, if you're new to After Effects, I very strongly recommend that you work your way through the getting-started materials here:
http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html

WebAS access via Portal: Web Dispatcher required for load balancing ABAP

Hi Folks -
We have EP 6.0 SP18 (Java only, WebAS 6.40, Unix/Solaris). The portal has a CI/SCS and one DI so we have a Web Dispatcher to load balance the portal servers. This works fine (and provides port 80 access).
This portal will provide access to HTTP services from an ABAP WebAS (6.20 with 6.40 kernel, Unix/Solaris). A landscape configuration entry has been added to the portal for this ABAP system. The ABAP system has a CI and multiple app servers, all capable of handling HTTP requests. This will also require port 80 access.
1. Will we need an additional Web Dispatcher to load balance HTTP requests to the 'backend' ABAP WebAS system, or will the portal be smart enough to handle the load balancing itself (perhaps based on the information in the landscape configuration)?
2. If the portal itself handles the HTTP load balancing can you point me to documentation (so I can make sure I have proper configuration)?
3. Are there any changes to this with NW2004s Portal (we plan to upgrade soon)?
Thanks in advance! Jeff

Jeff,
Regarding:
Q1. If you create a system object from the "SAP system with load balancing" template in portal and configure the object to point to your CI (msg server), the LB should be handled.
Q2. Portal load balancing is handled by the message server. If you point a test URL to the port of your message server, you will notice that you are issued a redirect the URL of your dialog instance. The web dispatcher is just a proxy (with some intelligence). When a request is made to the WD, it makes a connection to the MSG server, the list of active instances is queried, a redirect is made to that instanct. If you use WD, that connection can be proxied behind a standard URL. If you connect directly to the MSG Server instead, you will notice your URL change, just as it does on the service marketplace.
WDs are good for providing services, masked (proxied) behind virtual names. If you do not want the customer to see a physical URL of the server, use the WD. There are lots of other solutions that can do this too though such as Apache, ISA, Juniper devices, Cisco LDs. WDs have a very low performance threshold though, especially if you use SSL. WD is a performance bottleneck and should be benchmarked to see if it is right for your application.
Q3. No changes this architecture in 04s.
jwise

HT3024 i need help on the network settings on the imacd g4

I need help with my Internet settings on the inaction G4

Hello,
What Interface are you using? Built-in Modem for Dialup, Ethernet or Airport to a Router or Modem?

Need help reinstalling Acrobat X pro for MAC. Got one site but I-tunes didn't recognize so couldn't go further. I have serial

Need help reinstalling Acrobat X pro for MAC. Got one site but I-tunes didn't recognize so couldn't go further. I have serial

Actually, you can and have downloaded from there, because that message only happens when the download is finished.
The message is entirely normal, and is Apple's way of encouraging the world to use the Mac App Store. That doesn't help you because Acrobat isn't in the Mac App Store - it isn't allowed there.
So, what to do? Change your system settings
Please follow the steps given below to resolve this issue -
System Preferences > Security & Privacy > General > Allow applications downloaded from > Anywhere

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

I need help getting new authorization codes for digital copies

I need help getting new authorization codes for digital copies of movies. Can someone help me out?

There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

~graffiti wrote:
PjonesCET wrote:
I know if you attempt to download and exe file to Mac from a Mac Partition you'll get something like. Cannot not understand file format octet-stream. This means it does not recognize MS execute files.
Not necesarily. I've done it a few times.
PjonesCET wrote:
I'm not sure you can download a PC copy of Acrobat 9 unless you operating from bootcamp or other such application and running the PC partition.
Yes. You can.
I've learned something. New. This must be recently changed. That last time I clicked on a Link I though was a dmg file and turned out it was and exe file my Macs wouldn't allow me to do so. But haven't tried recently everytime and exe file comes up I cancel. I gues I am used to the time everytime a Virus or some other nasty was downloaded it was packaged in and exe file and Macs owuldn't allow it. I suppose with the INtel guts now they can no longer refuse to download.

Maestro need help also code is 75957252 for bios password reset

maestro need help also code is 75957252 for bios password reset
This question was solved.
View Solution.

Check your other post. I replied there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Need help in web dispatcher settings for redirect

Similar Messages

Maybe you are looking for