Need help in Xi faqs

Hi guys ,
This is SuryaNarayana . I have collected some faqs from www.**************** but they have no answers please answers these questions
Questions are releated in to XI-BPM
1. Business Process Management is concerned with ?
a. Processes within and across applications
b. Planned or spontaneous Human interaction
c. Automating, streamlining, managing business processes
d. Moving process control from application to technology layer
e. All of the above
2. Which open modeling standard ccBPM adheres to?
a. BPEL
b. XML
c. WSDL
d. None of these
3. High-Tech industry ccBPM implementation guidelines are known as ?
a. RosettaNet Implementation Framework
b. CIDX
c. Marketpalce
d. SAP BC
4. Individual "Swim Lane" in BPM modelling contains ?
a. Business Scenarios from same company
b. Business Scenarios from same Application
5. Different Panes within BPM editor in IR ?
a. Header
b. Editing
c. Process Overview
d. Property
e. Output
f. Object
g. All of the above
6. Data Declaration of the Business process can be viewed in ?
a. Correlation in Object area
b. Container in Output area
c. Container in Object area
d. None of these
7. Which of these is not Messaging relevant Step type ?
a. Receive
b. Send
c. Transformation
d. Receiver Determination
e. Block
8. Control Step can be used for, except ?
a. Terminate current process
b. Trigger an Exception
c. Trigger an Alert
d. Define different processing braches for process
9. Which of the following triggers process to start?
a. By receiving amessage assinged to receive step
b. Batch job by scheduling in WAS
c. Both of these
d. None of these.
10. To route response messages to the
correct process instance, _______ object is used ?
a. Correlation
b. Interface
c. Adapter
d. Mapping
11. Correlation handling is handled by ?
a. BP engine
b. Integration Engine
c. Adapter Engine
d. None of these
12. Container element can be typecasted to, except ?
a. simple XSD/XML Schema
b. Abstract i/f
c. Receiver
d. Multilne(vector)
e. Sender
13. Outer Container block has container element 'O' and inner Container block
has container element 'I'. Then which of the following is true?
a. Both 'O' and 'I' are visible in outer block.
b. Both 'O' and 'I' are visible in inner block.
c. Both of these.
d. None of these.
14. Simple Fork process step terminates when ?
a. All branches are true.
b. All branches are false.
c. Either true.
d. Either false.
15. Collect process pattern types includes ?
a. Condition
b. Receiver message
c. Append message
d. Increase counter
e. Merge message
f. Send message
g. All
XI-Releated questions
1. SAP XI is an Integration technology and platform?
a) for SAP and non SAP applications.
b) for A2A and B2B scenarios
c) for asynchronous and synchronous applications
d) for cross-component Business Process Management.
2. XI represents the following layer in the NetWeaver stack:?
a) People Integration
b) Information Integration
c) Process Integration
3. XI uses the following web standards ?
a) WSDL
b) XSD
c) SOAP
4. XI components include?
a) SLD (System Landscape Directory)
b) Integration Builder
c) Integration Server
d) Central Monitoring
e) Adapter Engine
5. Integration Builder is a?
a) Java application
b) ABAP application
c) .NET application
6. Java Web Start is required for?
a) Caching java clients
b) Drawing pictures
c) Connect to SUN systems
7. SLD is a?
a) Client application
b) Server application
8. XI is technically a client of SLD?
a) TRUE
b) FALSE
9. SLD adheres to?
a) Common Information Model
b) Web Services Definition Language
c) XML Schema Definition Language
d) XML
10. Usage of PCK (Partner Connectivity Kit) ?
a) Allow small partners and subsidiaries to communicate natively with XI
b) For Partners to connect to database systems7444
c) Allow Partners to connect to .NET and Java applications
11. Certain adapters are needed in cases where the Integration Server
is to exchange messages with an R/3 system based on basis kernel lower than?
a) 6.10
b) 6.20
c) 6.40
d) 4.5
12. XI supports the following QoS (Quality of Services)?
a) BE (Best Effort)
b) Exactly Once (EO)
c) Exactly Once In Order (EOIO)
d) Exactly Twice In Order (ETIO)
13. QoS BE is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
14. QoS EO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
15. QoS EOIO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
16. Adapter Framework is based on ?
a) JCA (Java Connector Architecture)
b) NCA (.NET Connector Architecture)
c) PCK (Partner Connectivity Kit)
d) WSDL (Web Services Definition Language)
17. XI Adapter Engine is based on the integrated?
a) ABAP engine
b) J2EE engine
c) .NET engine
d) JCA (Java Connector Architecture)
18. Integration Processes are built using?
a) WSDL (Web Services Definition Language)
b) BPEL (Business Process Execution Language)
c) XSD (XML Schema Definition Language)
d) JCL (Java Connector Language)
19. Runtime Workbench in XI is the central monitoring tool for the following?
a) Component Monitoring
b) Message Monitoring
c) End-to-End Monitoring
d) Performance Monitoring
e) Queue Monitoring
f) Schedule Monitoring
20. XI uses enhanced version of SOAP protocol called?
a) XI XML
b) XI SOAP
c) XI XSD
d) XI PML
21. What is the cardinality of MESSAGE TYPES : DATA TYPES ?
a) 1:1
b) 2:1
c) 2:2
d) 1:0
22. What are the advantages of ASYNCHRONOUS updates?
a) Acknowledgement can be sent back
b) Messages can be persisted.
23. What are the advantages of SYNCHRONOUS updates?
a) Acknowledgement can be sent back (messages can be persisted with additional configuration)
b) Messages can be persisted.
c) Messages cannot be persisted.
24. What is the Message format used in XI for processing?
a) Specific implementation of SOAP which is XI XML
b) JMS
c) RFC
d) CIDX
25. What is an Adapter?
a) Adapters are used to communicate to Legacy or SAP systems with WAS version < 6.2
b) Adapters are used to retrieve information from Java, .NET systems
c) Adapters are used to import IDOC, RFC information.
26. In the Integration Repository, what is the KEY of an
object or how can an object be uniquely identified?
a) SWCV, Namespace, Name
b) Namespace, Name, Description
c) Name, Description, SWCV
d) SWCV, SWCV1, SWCV2
27. How do you classify NAME SPACE in an R/3 Environment?
a) Equivalent to function group
b) Equivalent to development class
c) Equivalent to function module
d) Equivalent to BAPI
28. What is ICM?
a) Internet Console Manager
b) Internet Communication Manager
c) Infrastructure Communication Manager
d) Intranet Communication Manager
29. A Customer has WAS 6.2 and has decided to use XI?
a) He cannot use XI unless WAS 6.2 is upgraded to WAS 6.4
b) Can use XI with some additional patches
c) WAS 6.2 already has XI in it. No need of any additional software
30. What is the name space of an IDOC?
a) urn:sap-com:document:sap:idoc:messages
b) urn:sap-com:document:idoc:sap:messages
c) urn:sap-com:sap.document:idoc:messages
d) urn:sap-com:document:idoc:messages
31. What is the name space of an RFC ?
a) urn:sap-com:document:rfc:sap:functions
b) urn:sap-com:document:bapi:rfc:functions
c) urn:sap-com:document:sap:rfc:functions
d) urn:sap-com:document:remote:rfc:functions
32. What doesnt get transported when the configuration is released?
a) All Objects will get transported
b) Generated proxies and application coding in the application
components does not get transported when the configuration is released.
c) Only application coding will not get transported.
d) Only generated proxies will not get transported.
33. How many Pipelines are there in the integration server?
a) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding, Call Adapter, Request Message Mapping.
b) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding.
c) Message Branch, Request Message Mapping, Outbound Binding,
Call Adapter, Request Message Mapping.
34. What are the possible Trace Levels?
a) 0 No Trace,1 Low Trace Level,2 Medium Trace Level,
3 High Trace Level,4 Expert Trace Level
b) 0 No Trace,1 Low Trace Level,
2 Medium Trace Level,3 High Trace Level
c) 10 Low Trace Level,20 Medium Trace Level,
30 High Trace Level,40 Expert Trace Level
35. Does JMS adapter need additional driver to communicate to database?
a) Yes
b) No
c) JMS adapter is not available in XI
36. What is use of PCK?
a) Partner Connectivity Kit that helps Partner Systems with no ability
to communicate in XML speak to the Business Systems.
b) PCK is used to deploy additional drivers
c) PCK can be used as an alternative to XI
37. What is Context Object? What is its role?
a) Context Objects are pointers to a specific element within the message,
for future reference. Encapsulate the access to data that is contained
in the payload or in the header of the message.
b) Another form of data types
c) Can be used instead of message types
38. What adapters dont need Sender Agreement?
a) HTTP, IDOC.
b) IDOC, RFC
c) IDOC, JMS
d) JDBC, JMS
39. What is the Protocol followed for Mail Adapter?
a) SMTP
b) IMAP
c) POP3
d) POP4
40. Where do you configure an Adapter?
a) Sender Agreement
b) Receiver Determination
c) Business System
d) Communication Channel
41. Can a JDBC adapter query the database table?
If yes, what are different possibilities?
a) Yes. You can configure sender and receiver communication channels.
A special XML format is defined for content coming from the
Integration Engine. This canonical format enables SQL Insert,
Update, Select, Delete or stored procedure statements to be processed.
A message is always processed in exactly one database transaction.
b) JDBC adapter cannot insert records in the database.
c) We should not insert, update records in the database directly.
42. The message monitoring status DLNG means ?
a) DLNG = Delivering.
b) DLNG = Dialing
c) DLNG = Detailing
d) DLNG = Dismantling
43. Where do you perform Content Based Routing?
a) Receiver Determination
b) Receiver Agreement
c) Sender Agreement
d) Communication Channel
44. What are the various supported mapping types?
a) Message Mapping, Java Mapping, XSLT Mapping, ABAP Mapping.
b) XSLT, Java, JDBC, JMS
c) XSLT, WSDL, XSD
45. With respect to ABAP proxies,
what are the methods that can be coded?
a) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCHRONOUS.
b) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCH.
c) EXECUTE_SYNCH, EXECUTE_ASYNCH
46. Fields under a node with a minoccurs of ZERO has been mapped.
The values dont appear in the target result, what could be wrong?
a) The parent node has not been assigned.
b) Parent node has cardinality 0unbounded
c) Parent node has many fields
47. What is a SENDER COMM CHANNEL?
a) Sender Communication Channel is where you define the source system from
where the message/information goes to XI and also the adapter, the Sender System uses.
b) Sender Communication Channel is where you define the target system from where
the message/information goes out of XI and also the adapter, the Receiver System uses.
c) Sender Communication Channel is where you define the how the
interface mapping takes place between Sender and Receiver.
48. XSLT is supported but two statements were not supported. What are they?
a) <xsd:include>, <xsd:import>
b) <xsd:including>, <xsd:importing>
c) <xsd:includes>, <xsd:imports>
d) All statements are supported.
49. What steps can be inserted in an Exception branch?
a) Terminate a process, trigger an alert.
b) Terminate the interface, trigger IDOC.
c) Terminate exception, branch integration process.
50. What is multi mapping? When can it be used?
a) Multi Mapping is used to map abstract interfaces and can only be used in ccBPM.
b) Can be used when there are multiple interfaces from Sender systems.
c) Can be used when there are multiple interfaces from Receiver systems
51. The first step in the Integration process can be ?
a) Receive step
b) fork Step
c) Send Step
d) Block Step
52. An Exception raised by a step can be handled by ?
a) Only by exception handler in the same step
b) Only by exception handler in the outer step
c) By exception handler in the same step or in the outer step
53. An exception is raised by ?
a) Async or sync send step, transformation step and Control Step
b) Sync send step
c) By control step only
54. A message can be received by ?
a) Only a receive step
b) By receive, fork or loop step
c) By receive and block step
d) By send, block and Fork
55. What are the types of containers ?
a) Abstract
b) Simple & Abstract
c) Simple, Abstract and receiver
56. Which of these are true/false with user defined functions?
a) User defined functions are accessible only in the mapping where they are created
b) User defined functions are visible across namespace
c) User defined functions accessed in other mapping by copying it to that mapping
d) User defined functions are accessible in any mapping in a software component version
57. Java Mapping is executed by implementing the interface ?
a) com.sap.aii.mapping.api.StreamTransformation
b) com.sap.api.mapping.StreamTransformation
c) com.sap.api.mapping.aii.StreamTransformation
d) com.sap.mapping.api.StreamTransformation
58. An Idoc has been sent by a sender system to XI, but the idoc is not
received at the XI system which of these could be true/false ?
a) The destination system from the sender system to XI is not configured correctly.
b) The metadata in XI was copied/generated from the sender Idoc is corrupted
c) The destination system from XI to sender system is not defined correctly
d) Sender channel is not configured
59. While mapping which of these is true ? Can I use different mapping ?
a) You can use only one mapping at a time
b) You can use ABAP & JAVA mapping
c) You can use any mapping in any sequence any number of times
d) Different mapping cant be used together
60. To import the metadata from an R/3 system which of this is true/false ?
a) The import permitted in Software component need to be selected
b) You have to create ALE Name in SLD
c) You need to login to the destination (R/3) with a valid user
d) You need to login to destination(R/3) with a User having administrator rights
61. You are implementing XI for your customer, you have very good experience
working in ABAP. While mapping you want to do it in abap, but the option
available are only Message Mapping Java Mapping What would you do to
add the ABAP Mapping option. Where would you configure it?.
a) In Exchange profile
b) In s/w component
c) In Integration Repository
62. From the WSDL description from application server, you can generate ?
a) Java Proxies only
b) ABAP proxies
c) Java and ABAP proxies.
63. JMS adapter can be used for ?
a. IBM web sphere MQ
b. Sonique
c. Web services
64. Which of the following is true/false about HTTP plain adapters?
a. Sender channel is not required to be configured
b. Receiver channel is not required to be configured
c. Using this system can directly connect to integration server
65. You would install Adapter engine de-centrally ?
a. To install PCK
b. To monitor the messages de-centrally
c. To share load with the central adapter engine and increase performance.
66. To Receive the data using Select with JDBC adapter you would ?
a. You would configure a receiver channel
b. you would configure a sender channel
67. You find that the status in transaction SXI_CACHE is
not equal to 0. Which of the following would you perform?
a. Check the condition of BP in Integration Repository
b. Activate the BP in SXI_CHACHE.
c. Activate the BP in Integration Directory
68. Which are the methods that you need to call compulsorily in java mapping ?
a) execute(), setParameter()
b) Exit() Systemproperties()
c) Execute(), SetProperties()
69. What is the relationship between an integration process and business workflow?
a) The Business Process Engine is the same as the Workflow Engine.
b) The Business Process Engine needs external Workflow Engine
c) Business Process Engine is a new name for Workflow Engine
70. What are the different types that a container element can be based on?
a) Simple XSD types : XSD:DATE, XSD:TIME, XSD: INTEGER, XSD: STRING
b) Abstract Integer
c) Receiver
71. Which of the following is true with regards to Container Elements?
a) Elements of a super container are visible in sub container.
b) Elements of sub container are visible in super container
c) Container cannot have super or sub containers
d) Containers can have multiple elements.
72. Send message within an integration process to 8 receivers
at the same time, how can I do this?
a) Create a FORK statement with 8 branches
b) Create 8 interfaces
c) Create a loop with 8 interfaces
d) Create 8 branches
73. Which of the following Objects can be used in BPM ?
a) Context Object
b) Receiver Determination
c) Message Mapping
d) Interface Mapping
74.Could multiple instances of Integration process run at the same time ?
a) Yes
b) No
75. For ABAP mapping which of the following settings have to be done in Exchange Profile ?
a) Com.sap.aii.repository.mapping.additionaltypes = R3_ABAP | Abap-class; R3_XSLT | XSL
b) Com.sap.aii.repository.mapping.additionaltypes = R3_JAVA | Abap-class; R3_XSLT | XSL
c) Com.sap.aii.repository.mapping.additionaltypes = | Abap-class; R3_XSLT | XSL
76. How does Boolean functions work in message mappings ?
a) Boolean functions accept Boolean inputs and result in Boolean values
b) Boolean functions accept Boolean inputs and result in decimal values
c) Boolean functions accept Boolean inputs and result in alphanumeric values
77. While testing message mapping the source message occurs 3 times
but the target message occurs only once? What can be the reason ?
a) Target cardinality is not defined sufficiently
b) Source cannot repeat
c) Message mapping cannot handle multiple values
78. What JAR file is required to perform Java mapping ?
a) aii_map_api.jar
b) aii_map_api.java
c) aii_map_aii.jar
d) None
79. Collaboration Agreement is made of the following ?
a) Sender Agreement, Receiver Agreement
b) Sender Agreement, Sender Communication Channel
c) Sender Agreement, Receiver Communication Channel
d) Receiver Agreement, Receiver Communication Channel
80.What are the three IDOC related transactions in XI ?
a) IDX9
b) IDX1
c) IDX2
d) IDX5
e) IDX3
81.Is EOIO supported by RFC ?
a) YES
b) NO
82. Java Web Start is used for ?
a) Caching Java applications
b) to write Java code
c) to execute Java mapping
d) to perform JMS connectivity
83. Where do you define Usage Dependency?
a) Integration Repository
b) Integration Directory
c) SLD
d) Enterprise Portal
84. For ABAP mapping which class must be implemented ?
a) IF_MAPPING
b) IF_MAPPING_ABAP
c) MAPPING_ABAP
d) MAPPING_EXECUTE_ABAP
85.Component Monitoring in the RWB is used to display
the monitoring of the following components?
a) Integration Engine
b) Adapter Engine
c) Integration Directory
d) Integration Repository
e) Runtime Workbench
86.Does HTTP adapter support QoS BE?
a) Yes
b) No
87.IDOC adapter supports the following QoSs?
a) EO
b) EOIO
c) BE
d) All the above
88.The Client has decided to user HTTP adapter as Sender.
Which transaction should be used to configure the HTTP adapter?
a) SICF
b) SMICM
c) SM59
d) SE80
89.The following transaction is used to monitor XML messages in XI ?
a) SXMB_MONI
b) SM59
c) SXMB_ADM
d) SICF
90.File adapter has the following QoS?
a) BE
b) EO
c) EOIO
d) BEIO
91.When FILE adapter as Sender, we do not need Sender agreement ?
a) Yes
b) No
92. File Sender communication channel can be used by only one Sender agreement ?
a) True
b) False
93. SOAP adapter uses the following message protocol:?
a) SOAP 1.1
b) SOAP 1.2
c) SOAP 1.9
d) SOAP 1.3
94. Using the following URL we can display the content of CPACache?
a) http://<host>:<J2EEport >/CPACache
b) http://<host>:<J2EEport >/AdapterCache
c) http://<host>:<J2EEport >/CPACatch
d) http://<host>:<J2EEport >/CPACache/index.html
95. The following URL can be used to display the Adapter Status in XI ?
a) http://<host>:<J2EEport >/AdapterFramework
b) http://<host>:<J2EEport >/AdapterFramework/RFC
c) http://<host>:<J2EEport >/AdapterFramework/rep
d) http://<host>:<J2EEport >/AdapterStatus
96. Which security role need to be assigned to access the CPACache ?
a) xi_af_cpa_monitoring
b) xi_af_cache_monitor
c) xi_af_cpa_monitor
97. The following URL can be used to manually refresh the CPACache?
a) http://<host>:<J2EEport >/CPACache/refresh=delta
b) http://<host>:<J2EEport >/CPACache/refresh?mode=full
c) http://<host>:<J2EEport >/CPACache/refresh?mode=all
98. The Objects from repository are accessed from directory using user?
a) XIDIRUSER
b) XISUPER
c) XIAPPLUSER
d) XIADMIN
99. Information about the central and decentral Adapter
Framework installations is maintained in ?
a) SLD
b) CLD
c) IR
d) ID
100. Special drivers required for JDBC, JMS adapters can be deployed using ?
a) SPM (Software Procurement Manager)
b) SDM (Software Deployment Manager)
c) SCM (Software Change Manager)
d) SOM (Software Ownership Manager)

Similar Messages

Need help on these faq's

Hi,
Need some info on these questns...pls help
1.What is the advantages of using ABAP objects in reports?
2. What does an EXEC SQL statement do in ABAP. What is the disadvantage of using it?
3. The format of hierarchical sequential ALV?
4. Explain HOST command? Is it possible to run the host command in SAP environment?
5. How to backup Sapscript layout set?
6. Difference between parameters SET and GET?
7. What is the coding example for filling a BDC table?
8. What are the components of the SAP menu?
9. Explain Scroll function?
10. Steps to set a lock on a record within a DB table?
11. What are the exceptions in Function Modules?
12. What are the events driven in a batch job?

Hi David,
This is regarding SET & GET Parameters.
SAP allows you to make use of SPA/GPA technique to fill the input fields of a called transaction with data from the calling program.SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
If you want to set SPA/GPA parameters before a program call, you need to know which parameters are linked to which fields on the initial screen. A simple way of doing this is to start the program that you want to call, place the cursor on the input fields, and choose F1 followed by Technical info. The Parameter ID field contains the name of the corresponding SPA/GPA parameter. Alternatively, you can look at the screen definition in the Screen Painter.
The SPA/GPA parameter for the input field Company has the ID CAR. Use this method to find the IDs CON, DAY, and BOK for the other input fields.
The following executable program is connected to the logical database F1S and calls an update transaction:
REPORT BOOKINGS NO STANDARD PAGE HEADING.
TABLES SBOOK.
START-OF-SELECTION.
WRITE: 'Select a booking',
SKIP.
GET SBOOK.
WRITE: SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
HIDE: SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
AT LINE-SELECTION.
SET PARAMETER ID: 'CAR' FIELD SBOOK-CARRID,
'CON' FIELD SBOOK-CONNID,
'DAY' FIELD SBOOK-FLDATE,
'BOK' FIELD SBOOK-BOOKID.
CALL TRANSACTION 'BOOK'.
The basic list of the program shows fields from the database table SBOOK according to the user entries on the selection screen. These data are also stored in the HIDE areas of each line.
Reward If useful.
Regards,
Chitra

Need help in alignment a form

Hello,
I am new in writing HTML code. I need help to align my Form
and it's text.
Please view my code and please show me how to align all the
square boxes (the square box is where the user type the text
input). Currently I have 2 boxes but they are not aligned. The
below is my code:
<FORM name="input" method="get" >
PROJECTROOT: <INPUT TYPE=TEXT SIZE=50 NAME=proj_root>
<br>
FRONTEND: <INPUT TYPE=TEXT SIZE=50 NAME=frontend>
<br>>
<BR>
<INPUT TYPE=SUBMIT VALUE=Submit onclick="save()">
<BR>
</FORM>
Would you please help.
Thank you very much
Goober35

<form name="input" method="get" action=""> 
<table cellspacing="0" cellpadding="0" border="0"
width="300">
<tr>
<td><label for="proj_root">PROJECTROOT:
</label></td>
<td><input type="text" size="50" name="proj_root"
id="proj_root"></td>
</tr>
<tr>
<td><label for="frontend">FRONTEND:
</label></td>
<td><input type="text" size="50" name="frontend"
id="frontend"></td>
</tr>
<tr>
<td colspan="2" align="center"><input type="submit"
name="submit"
id="submit" value="Submit" onclick="save()"></td>
</tr>
</table>
</form>
(your form needs an action attribute value)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"goober35" <[email protected]> wrote in
message
news:gcjmlh$p42$[email protected]..
> Hello,
> I am new in writing HTML code. I need help to align my
Form and it's text.
> Please view my code and please show me how to align all
the square boxes
> (the
> square box is where the user type the text input).
Currently I have 2
> boxes but
> they are not aligned. The below is my code:
>
> <FORM name="input" method="get" >
> PROJECTROOT: <INPUT TYPE=TEXT SIZE=50
NAME=proj_root> <br>
> FRONTEND: <INPUT TYPE=TEXT SIZE=50 NAME=frontend>
<br>>
> <BR>
> <INPUT TYPE=SUBMIT VALUE=Submit onclick="save()">
<BR>
>
> </FORM>
>
>
> Would you please help.
>
> Thank you very much
> Goober35
>
>
> <FORM name="input" method="get" >
> PROJECTROOT: <INPUT TYPE=TEXT SIZE=50
NAME=proj_root> <br>
> FRONTEND: <INPUT TYPE=TEXT SIZE=50 NAME=frontend>
<br>>
> <BR>
> <INPUT TYPE=SUBMIT VALUE=Submit onclick="save()">
<BR>
>
> </FORM>
>

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

Need help in posting a Form

Hi Everybody,
I'm having a Struts application that uses DynaValidatorForm for performing Validations.
The basic flow is like this -> I've got a home page, then a login page (action -> register.do) & a third page (action -> authenticate.do) which is displayed after authenticating the user.
I'm trying to re-direct the user to the home page once he directly accesses /authenticate.do
For this, in the Action class of /register, I'd defined a session attribute & set a value to it.
Then, in the Action class of /authenticate, I'm checking for the session attribute. If not present, I'm re-directing the user to home page.........
The problem that I'm facing is that when I directly access /authenticate.do, the application is not getting re-directed & instead, it is displaying error messages that User name & password (the 2 fields present in my login page) are required..........
The <action> tag of /authenticate.do has got validate="true" & hence it seems that validation occurs before re-directing....
Therefore, can someone tell me why is the application not posting the form to Action class of /authenticate........
Thanx in advance.....
Regards,
Sasidharan N

<form name="input" method="get" action=""> 
<table cellspacing="0" cellpadding="0" border="0"
width="300">
<tr>
<td><label for="proj_root">PROJECTROOT:
</label></td>
<td><input type="text" size="50" name="proj_root"
id="proj_root"></td>
</tr>
<tr>
<td><label for="frontend">FRONTEND:
</label></td>
<td><input type="text" size="50" name="frontend"
id="frontend"></td>
</tr>
<tr>
<td colspan="2" align="center"><input type="submit"
name="submit"
id="submit" value="Submit" onclick="save()"></td>
</tr>
</table>
</form>
(your form needs an action attribute value)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"goober35" <[email protected]> wrote in
message
news:gcjmlh$p42$[email protected]..
> Hello,
> I am new in writing HTML code. I need help to align my
Form and it's text.
> Please view my code and please show me how to align all
the square boxes
> (the
> square box is where the user type the text input).
Currently I have 2
> boxes but
> they are not aligned. The below is my code:
>
> <FORM name="input" method="get" >
> PROJECTROOT: <INPUT TYPE=TEXT SIZE=50
NAME=proj_root> <br>
> FRONTEND: <INPUT TYPE=TEXT SIZE=50 NAME=frontend>
<br>>
> <BR>
> <INPUT TYPE=SUBMIT VALUE=Submit onclick="save()">
<BR>
>
> </FORM>
>
>
> Would you please help.
>
> Thank you very much
> Goober35
>
>
> <FORM name="input" method="get" >
> PROJECTROOT: <INPUT TYPE=TEXT SIZE=50
NAME=proj_root> <br>
> FRONTEND: <INPUT TYPE=TEXT SIZE=50 NAME=frontend>
<br>>
> <BR>
> <INPUT TYPE=SUBMIT VALUE=Submit onclick="save()">
<BR>
>
> </FORM>
>

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

Need help in hr abap

hi friends,
I need to learn hr abap.I need help from u ...if anyone have hr abap documents or books please give me..or suggest me some basic hr abap book names
Thank u.
Pinky.

sample programs
REPORT ZPETROL_EXCLUDE .
TABLES SSCRFIELDS.
SELECTION-SCREEN BEGIN OF SCREEN 100.
SELECTION-SCREEN SKIP 9.
PARAMETERS NUMBER(200) TYPE C.
SELECTION-SCREEN SKIP 2.
SELECTION-SCREEN:
BEGIN OF LINE,
PUSHBUTTON 2(10) TEXT-001 USER-COMMAND PROC,
END OF LINE.
SELECTION-SCREEN END OF SCREEN 100.
CALL SCREEN 100.
AT SELECTION-SCREEN.
CASE SSCRFIELDS.
WHEN 'PROC'.
SET PARAMETER ID: 'NUM' FIELD NUMBER.
CALL TRANSACTION 'ZP_PALLOWANCE'.
LEAVE TO SCREEN 0.
ENDCASE.
SECOND PRG
REPORT ZPR_PETROL_ALLOWANCE NO STANDARD PAGE
HEADING .
*-- Infotypes
INFOTYPES : 0000, "Actions
0002, "Personal Data
0008. "Basic pay details
*-- Tables
TABLES : PERNR, "Standard Selections for HR Master Data Reporting
PC207, "Payroll Results: Results Table
PCL1, "HR Cluster 1
PCL2, "HR Cluster 2
T510, "Pay scales
T549A, "Payroll areas
T549Q, "Payroll Periods
PA0002. "Personal details
*-- Internal Tables
*-- Internal Table Declaration For Holding The Data
DATA: BEGIN OF INT_PETROL OCCURS 0,
PERNR LIKE PA0008-PERNR, "Personnel Number
TRFST LIKE PA0008-TRFST, "Pay Scale Level
NAME(40), "Name of Employee
PALLOWANCE TYPE P DECIMALS 2, "Petrol Allowance Amount
END OF INT_PETROL.
DATA: BEGIN OF PA0015_DATA OCCURS 0,
PERNR LIKE PA0015-PERNR,
BETRG LIKE PA0015-BETRG,
END OF PA0015_DATA.
DATA:BEGIN OF INT_PETROL2 OCCURS 0,
PERNR LIKE PA0008-PERNR, "Personnel Number
VORNA LIKE PA0002-VORNA, "First Name
NACHN LIKE PA0002-NACHN, "Last Name
TRFST LIKE PA0008-TRFST, "Pay Scale Level
NAME(40), "Name of Employee
PALLOWANCE TYPE P DECIMALS 2, "Petrol Allowance Amount
END OF INT_PETROL2.
DATA : TITLE TYPE LVC_TITLE.
DATA: BEGIN OF PER_NO OCCURS 0,
PERNR LIKE PA0008-PERNR,
TRFST LIKE PA0008-TRFST,
END OF PER_NO.
DATA: BEGIN OF MSG OCCURS 0,
MSG1(100) TYPE C,
END OF MSG.
DATA: FLAG TYPE I VALUE '0',
DIS_FLAG TYPE I VALUE '0'.
DATA: INT_PETROL3 LIKE STANDARD TABLE OF INT_PETROL2 INITIAL SIZE 0
WITH HEADER LINE.
DATA: INT_PETROL1 LIKE STANDARD TABLE OF INT_PETROL INITIAL SIZE 0 WITH
HEADER LINE.
DATA: WA_PET_ALLOWANCE TYPE ZBPETROL_ALL. "WORKAREA FOR INSERTING
VALUES.
*DATA: P_LGART1 LIKE T512T-LGART VALUE '0010'. "CHANGE WAGE TYPE HERE
DATA: P_LGART1 LIKE T512T-LGART VALUE '0077'. "CHANGE WAGE TYPE HERE
DATA: BEGIN OF INT_0015 OCCURS 0,
PERNR(038),
BEGDA(010),
BETRG(018),
END OF INT_0015.
*-- Internal Table To Store Error Records.
DATA: E_INT_0015 LIKE INT_0015 OCCURS 0 WITH HEADER LINE.
*-- Batch Input Data of Single Transaction
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*-- Internal Table For Export and Import Payroll Results
DATA: INT_RGDIR LIKE PC261 OCCURS 0 WITH HEADER LINE,
LGTXT LIKE T512T-LGTXT.
DATA: BEGIN OF EMP_NO OCCURS 0,
PERNR(4) TYPE C,
END OF EMP_NO.
DATA: BEGIN OF EMP_NO1 OCCURS 0,
PERNR TYPE I,
END OF EMP_NO1.
DATA EMPNO LIKE STANDARD TABLE OF EMP_NO INITIAL SIZE 0.
DATA EMPNO1 LIKE STANDARD TABLE OF EMP_NO1 INITIAL SIZE 0 WITH HEADER
LINE.
DATA LEN1 TYPE I.
DATA: ERR LIKE MESSAGE.
DATA TEMP_NUM(200) TYPE C.
*-- Includes
*-- International Include
INCLUDE RPC2CD09. "Cluster CD data definition
INCLUDE RPC2CA00. "Cluster CA Data-Definition
INCLUDE RPPPXD00. "Data Definition buffer PCL1/PCL2 Buffer INCLUDE RPPPXD10.
"Common part buffer PCL1/PCL2 INCLUDE RPPPXM00. "Buffer Handling routine
*-- Country Specific Include
INCLUDE PC2RXIN0. "Cluster IN data definition
INCLUDE RPC2RX09.
*-- ALV Declaration
TYPE-POOLS : SLIS.
DATA: INT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
INT_EVENTS TYPE SLIS_T_EVENT,
INT_LAYOUT TYPE SLIS_LAYOUT_ALV,
WS_EVENTS TYPE SLIS_ALV_EVENT,
WS_REPID LIKE SY-REPID.
*-- Initialization
INITIALIZATION.
WS_REPID = SY-REPID.
*-- At Selection-Screen
START-OF-SELECTION.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) TEXT-002.
SELECTION-SCREEN POSITION 33.
PARAMETERS: P_RATE TYPE P DECIMALS 2.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN BEGIN OF BLOCK B3.
PARAMETERS: P_UPLOAD AS CHECKBOX,
P_FG RADIOBUTTON GROUP G1,
P_BG RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B4.
PARAMETERS: P_DI AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK B4.
SELECTION-SCREEN END OF BLOCK B2.
AT SELECTION-SCREEN.
*-- Wate Type Text
SELECT SINGLE LGTXT INTO LGTXT FROM T512T WHERE SPRSL = 'E' AND
MOLGA = '40' AND LGART = P_LGART1 .
*-- Data Retrieval From Logical Database PNP
GET PERNR.
PROVIDE PERNR FROM P0000 VORNA NACHN FROM P0002 BETWEEN PN-BEGDA AND
PN-ENDDA.
INT_PETROL1-PERNR = P0000-PERNR.
CONCATENATE P0002-VORNA P0002-NACHN INTO INT_PETROL1-NAME SEPARATED
BY SPACE.
ENDPROVIDE.
*-- Clear Data
CLEAR: RGDIR, INT_RGDIR.
REFRESH: RGDIR, INT_RGDIR.
*-- Read All The Payroll Runs For An Employee
CD-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-CU.
CHECK RP-IMP-CD-SUBRC EQ 0.
*-- Clear Data
REFRESH: RT.
Read IN Cluster.
LOOP AT RGDIR WHERE FPBEG >= PN-BEGDA AND FPEND <= PN-ENDDA.
MOVE-CORRESPONDING RGDIR TO INT_RGDIR.
APPEND INT_RGDIR.
CLEAR INT_RGDIR.
ENDLOOP.
Read the last record.
SORT INT_RGDIR BY SEQNR DESCENDING.
READ TABLE INT_RGDIR INDEX 1.
RX-KEY-SEQNO = INT_RGDIR-SEQNR.
RX-KEY-PERNR = PERNR-PERNR.
RP-IMP-C2-IN.
CHECK RP-IMP-IN-SUBRC EQ 0.
READ TABLE RT WITH KEY LGART = P_LGART1.
IF SY-SUBRC = 0.
INT_PETROL1-PALLOWANCE = RT-BETRG.
ENDIF.
APPEND INT_PETROL1.
CLEAR INT_PETROL1.
SELECT TRFST PERNR
INTO CORRESPONDING FIELDS OF TABLE PER_NO
FROM PA0008
WHERE TRFST LIKE 'L%'
AND BET01 > 0.
SORT PER_NO.
DELETE ADJACENT DUPLICATES FROM PER_NO.
*-- END-OF-SELECTION.
END-OF-SELECTION.
LOOP AT INT_PETROL1.
READ TABLE PER_NO WITH KEY PERNR = INT_PETROL1-PERNR.
IF SY-SUBRC = 0.
INT_PETROL-TRFST = PER_NO-TRFST.
MODIFY INT_PETROL1 FROM INT_PETROL TRANSPORTING TRFST.
ENDIF.
ENDLOOP.
SORT INT_PETROL1.
DELETE ADJACENT DUPLICATES FROM INT_PETROL1.
CONCATENATE 'From' ' : ' PN-BEGDA6(2) '.' PN-BEGDA4(2) '.' PN-
BEGDA+0(4)
' To' ' : ' PN-ENDDA6(2) '.' PN-ENDDA4(2) '.' PN-ENDDA+0(4)
INTO TITLE.
IF P_DI = 'X'. "TO DISPLAY PETROL ALLOWANCE ONLY
IF PNPTIMRA = 'X'. "CHECK OTHER PERIOD CHECKED
DIS_FLAG = 1.
ENDIF.
IF PNPTIMR9 = 'X'. "CHECK TO SEE CURRENT PERIOD SELECTED
CASES - NO RATE GIVEN, RATE GIVEN
CURRENT PERIOD UPLOADED BUT PAYROLL NOT WRITTEN SO NO RESULT FROM LDB
SELECT RATE INTO P_RATE FROM ZBPETROL_ALL WHERE BEGDA = PN- BEGDA AND ENDDA = PN-ENDDA.
ENDSELECT.
IF SY-DBCNT = 0.
MESSAGE I455(0) WITH 'NO PETROL RATE EXSISTS'.
ELSE.
FLAG = 1.
ENDIF. "OF SY-DBCNT
IF P_RATE > 0 AND FLAG = 1. " PETROL RATE EXSISTS.
SELECT PERNR SUM( BETRG ) INTO TABLE PA0015_DATA
FROM PA0015
WHERE BEGDA BETWEEN PN-BEGDA AND PN-ENDDA
GROUP BY PERNR.
SELECT APERNR ATRFST BVORNA BNACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON BPERNR = APERNR
WHERE A~TRFST LIKE 'L%'
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE PA0015_DATA WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC = 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
INT_PETROL-PALLOWANCE = PA0015_DATA-BETRG.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
DIS_FLAG = 1.
ENDIF. "P_RATE > 0 AND FLAG = 1.
IF P_RATE > 0 AND FLAG = 0. "CURRENT PERIOD AND DATA NOT UPLOADED
SELECT APERNR ATRFST BVORNA BNACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON BPERNR = APERNR
WHERE A~TRFST LIKE 'L%'
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
PERFORM GET_VALUE. "TO CONVERT THE FIRST SCREEN PERNR INTO
NUMBER FORMATE
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE EMPNO1 WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC <> 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
PERFORM CAL_ALLOWANCE.
ENDIF. " OF P_RATE > 0
DIS_FLAG = 1.
ENDIF. " OF CURRENT PERIOD CHECK.
ENDIF. " OF CHECK DISPLAY.
*----BDC
IF P_UPLOAD = 'X'.
IF PNPTIMRA = 'X'. "CHECK OTHER PERIOD CHECKED
MESSAGE I455(0) WITH 'Petrol Allowance cannot be uploaded'.
LEAVE SCREEN.
ENDIF.
IF P_RATE > 0.
IF P_RATE > 0 OR P_RATE = 0.
IF PNPTIMR9 = 'X'. "CHECK TO SEE CURRENT PERIOD SELECTED
WA_PET_ALLOWANCE-BEGDA = PN-BEGDA.
WA_PET_ALLOWANCE-ENDDA = PN-ENDDA.
WA_PET_ALLOWANCE-RATE = P_RATE.
WA_PET_ALLOWANCE-CURR = 'INR'.
INSERT INTO ZBPETROL_ALL VALUES WA_PET_ALLOWANCE.
SELECT A~PERNR A~TRFST B~VORNA B~NACHN
INTO CORRESPONDING FIELDS OF TABLE INT_PETROL3
FROM PA0008 AS A
INNER JOIN PA0002 AS B ON B~PERNR = A~PERNR
WHERE A~TRFST IN ('L1' , 'L2' , 'L3')
AND A~BET01 > 0.
SORT INT_PETROL3.
DELETE ADJACENT DUPLICATES FROM INT_PETROL3.
REFRESH INT_PETROL1.
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
employee name
CONCATENATE INT_PETROL2-VORNA INT_PETROL2-NACHN INTO
INT_PETROL2-NAME SEPARATED BY SPACE.
MODIFY INT_PETROL3 FROM INT_PETROL2 TRANSPORTING NAME.
ENDLOOP.
PERFORM GET_VALUE. "TO CONVERT THE FIRST SCREEN PERNR INTO
NUMBER FORMATE
LOOP AT INT_PETROL3 INTO INT_PETROL2. "loop to transport
one
table to another table
READ TABLE EMPNO1 WITH KEY PERNR = INT_PETROL2-PERNR.
IF SY-SUBRC <> 0.
INT_PETROL-PERNR = INT_PETROL2-PERNR.
INT_PETROL-TRFST = INT_PETROL2-TRFST.
INT_PETROL-NAME = INT_PETROL2-NAME.
APPEND INT_PETROL TO INT_PETROL1.
ENDIF.
ENDLOOP.
PERFORM CAL_ALLOWANCE.
DIS_FLAG = 1.
SORT INT_PETROL1.
LOOP AT INT_PETROL1.
MOVE: INT_PETROL1-PERNR TO INT_0015-PERNR,
INT_PETROL1-PALLOWANCE TO INT_0015-BETRG.
CONCATENATE PN-ENDDA6(2) PN-ENDDA4(2) PN-ENDDA+0(4) INTO
INT_0015-BEGDA SEPARATED BY '.'.
APPEND INT_0015.
CLEAR INT_0015.
ENDLOOP.
LOOP AT INT_0015.
PERFORM F_BDCDATA.
IF P_FG = 'X'.
CALL TRANSACTION 'PA30' USING BDCDATA MODE 'A' UPDATE 'S'.
ELSE.
CALL TRANSACTION 'PA30' USING BDCDATA MODE 'N' UPDATE 'S'.
ENDIF.
*-- Handling Error records.
IF SY-SUBRC <> 0.
*-- Handling Error Messages
PERFORM ERROR_MSG.
MOVE-CORRESPONDING INT_0015 TO E_INT_0015.
APPEND E_INT_0015.
CLEAR E_INT_0015.
ENDIF.
REFRESH BDCDATA.
ENDLOOP.
*-- Downloading Error Records.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\Errors.Txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = E_INT_0015.
*-- Downloading Error Messages.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = 'C:\Err_Msg.Txt'
FILETYPE = 'ASC'
TABLES
DATA_TAB = MSG.
ENDIF. " FOR CURRENT PERIOD
ENDIF.
ELSE.
MESSAGE I455(0) WITH 'Enter Petrol Rate'.
LEAVE TO SCREEN 0.
ENDIF. " FOR PETROL RATE
ENDIF. " FOR UPLOAD
IF DIS_FLAG = 1.
INT_LAYOUT-SUBTOTALS_TEXT = TEXT-004.
INT_LAYOUT-TOTALS_TEXT = TEXT-004.
INT_LAYOUT-ZEBRA = 'X'.
PERFORM FILL_FIELDCAT.
PERFORM GET_EVENTS_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = WS_REPID
IS_LAYOUT = INT_LAYOUT
IT_FIELDCAT = INT_FIELDCAT[]
I_DEFAULT = 'X'
I_SAVE = 'X'
IT_EVENTS = INT_EVENTS
TABLES
T_OUTTAB = INT_PETROL1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
*& Form GET_VALUE
text
FORM GET_VALUE.
GET PARAMETER ID: 'NUM' FIELD TEMP_NUM.
IF TEMP_NUM <> ''.
LEN1 = STRLEN( TEMP_NUM ).
PERFORM GET_PERNR.
APPEND TEMP_NUM TO EMPNO.
LOOP AT EMPNO INTO EMP_NO.
CALL FUNCTION 'CHECK_AND_CONVERT_NUMERICS'
EXPORTING
DFELD = ' '
DMZEI = ','
DTYPE = 'STRING'
DYPNO = ' '
EFELD = EMP_NO-PERNR
FNAME = ' '
PROGR = ' '
IMP_DECIMALS = '0'
IMPORTING
ERROR =
IFELD = EMP_NO1-PERNR
MESSG = ERR
MSGLN =
IF ( ERR-MSGID = '' ).
APPEND EMP_NO1 TO EMPNO1.
CLEAR EMP_NO1-PERNR.
ELSE.
MESSAGE I455(0) WITH 'Could not convert employee number'.
LEAVE TO SCREEN 0.
ENDIF.
ENDLOOP.
ENDIF.
ENDFORM. "GET_VALUE
*& Form GET_PERNR
text
FORM GET_PERNR.
SPLIT TEMP_NUM AT ',' INTO EMP_NO TEMP_NUM.
APPEND EMP_NO TO EMPNO.
CLEAR EMP_NO.
SEARCH TEMP_NUM FOR ','.
IF SY-SUBRC = 0.
PERFORM GET_PERNR.
ENDIF.
ENDFORM. "GET_PERNR
*& Form ERROR_MSG
text
--> p1 text
<-- p2 text
FORM ERROR_MSG.
IF SY-SUBRC <> 0.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
LANG = SY-LANGU
IMPORTING
MSG = MSG-MSG1.
APPEND MSG.
CLEAR MSG.
ENDIF.
ENDFORM. "ERROR_MSG
*& Form F_BDCDATA
text
FORM F_BDCDATA.
PERFORM BDC_DYNPRO USING 'SAPMP50A' '1000'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=INS'.
PERFORM BDC_FIELD USING 'RP50G-PERNR'
INT_0015-PERNR.
PERFORM BDC_FIELD USING 'RP50G-TIMR6'
'X'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'RP50G-CHOIC'.
PERFORM BDC_FIELD USING 'RP50G-CHOIC'
'0015'.
PERFORM BDC_DYNPRO USING 'MP001500' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'Q0015-BETRG'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/00'.
PERFORM BDC_FIELD USING 'P0015-LGART'
'0077'. "CHANGE WAGE TYPE HERE
ALSO
PERFORM BDC_FIELD USING 'Q0015-BETRG'
INT_0015-BETRG.
PERFORM BDC_FIELD USING 'P0015-WAERS'
'INR'.
PERFORM BDC_FIELD USING 'P0015-BEGDA'
INT_0015-BEGDA.
PERFORM BDC_DYNPRO USING 'MP001500' '2000'.
PERFORM BDC_FIELD USING 'BDC_CURSOR'
'P0015-LGART'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=UPD'.
PERFORM BDC_FIELD USING 'P0015-LGART'
'0077'. "CHANGE WAGE TYPE HERE
ALSO
PERFORM BDC_FIELD USING 'Q0015-BETRG'
INT_0015-BETRG.
PERFORM BDC_FIELD USING 'P0015-WAERS'
'INR'.
PERFORM BDC_FIELD USING 'P0015-BEGDA'
INT_0015-BEGDA.
ENDFORM. "F_BDCDATA
*& Form BDC_DYNPRO
text
-->P_0732 text
-->P_0733 text
FORM BDC_DYNPRO USING VALUE(P_0732) TYPE C
VALUE(P_0733) TYPE C.
CLEAR BDCDATA.
BDCDATA-PROGRAM = P_0732.
BDCDATA-DYNPRO = P_0733.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. " BDC_DYNPRO
*& Form BDC_FIELD
text
-->P_0755 text
-->P_0756 text
FORM BDC_FIELD USING VALUE(P_0755) TYPE C
VALUE(P_0756) TYPE C.
CLEAR BDCDATA.
BDCDATA-FNAM = P_0755.
BDCDATA-FVAL = P_0756.
APPEND BDCDATA.
ENDFORM. " BDC_FIELD
*& Form CAL_ALLOWANCE
text
FORM CAL_ALLOWANCE.
LOOP AT INT_PETROL1 INTO INT_PETROL.
IF INT_PETROL-TRFST = 'L1'.
INT_PETROL-PALLOWANCE = P_RATE * 100. "CHANGE TO SELECT WHEN
DISPLAY
ELSEIF INT_PETROL-TRFST = 'L2'.
INT_PETROL-PALLOWANCE = P_RATE * 150.
ELSEIF INT_PETROL-TRFST = 'L3'.
INT_PETROL-PALLOWANCE = P_RATE * 150.
ELSEIF INT_PETROL-TRFST = 'L4'.
INT_PETROL-PALLOWANCE = P_RATE * 200.
ELSEIF INT_PETROL-TRFST = 'L5'.
INT_PETROL-PALLOWANCE = P_RATE * 250.
ENDIF.
MODIFY INT_PETROL1 FROM INT_PETROL TRANSPORTING PALLOWANCE.
ENDLOOP.
ENDFORM. "CAL_ALLOWANCE
*& Form FILL_FIELDCAT
text
--> p1 text
<-- p2 text
FORM FILL_FIELDCAT.
INT_FIELDCAT-COL_POS = 1.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'PERNR'.
INT_FIELDCAT-SELTEXT_L = TEXT-005.
INT_FIELDCAT-OUTPUTLEN = 10.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 2.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'NAME'.
INT_FIELDCAT-SELTEXT_L = TEXT-006.
INT_FIELDCAT-OUTPUTLEN = 25.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 3.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'TRFST'.
INT_FIELDCAT-SELTEXT_L = TEXT-007.
INT_FIELDCAT-OUTPUTLEN = 5.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
INT_FIELDCAT-COL_POS = 4.
INT_FIELDCAT-TABNAME = 'INT_PETROL1'.
INT_FIELDCAT-FIELDNAME = 'PALLOWANCE'.
INT_FIELDCAT-SELTEXT_L = TEXT-008.
INT_FIELDCAT-OUTPUTLEN = 16.
INT_FIELDCAT-KEY = 'X'.
APPEND INT_FIELDCAT.
CLEAR INT_FIELDCAT.
ENDFORM. " FILL_FIELDCAT
*& Form GET_EVENTS_ALV
text
--> p1 text
<-- p2 text
FORM GET_EVENTS_ALV.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 1
IMPORTING
ET_EVENTS = INT_EVENTS[]
EXCEPTIONS
LIST_TYPE_WRONG = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE INT_EVENTS INTO WS_EVENTS WITH KEY NAME =
SLIS_EV_TOP_OF_PAGE.
IF SY-SUBRC = 0.
WS_EVENTS-FORM = 'TOP'.
MODIFY INT_EVENTS FROM WS_EVENTS INDEX SY-TABIX.
ENDIF.
ENDFORM. " GET_EVENTS_ALV
*& Form TOP-OF-PAGE
text
FORM TOP.
*-- ALV Declarations
DATA: WS_HEADER TYPE SLIS_T_LISTHEADER,
WA_HEADER TYPE SLIS_LISTHEADER.
*-- Title
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = TEXT-009.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = TITLE.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' '.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
WA_HEADER-TYP = 'H'.
WA_HEADER-INFO = ' '.
APPEND WA_HEADER TO WS_HEADER.
CLEAR WA_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = WS_HEADER
I_LOGO = 'LOGO'.
ENDFORM. "TOP-OF-PAGE
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
Check these links -
http://help.sap.com/saphelp_erp2005vp/helpdata/en/8a/6a46347969e94be10000009b38f83b/frameset.htm
Re: INFOTYPE
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://www.sap-img.com/sap-hr.htm
HR abap
Go through the SAp doc for HR programming and start doing.
Refer this link
http://www.sapdevelopment.co.uk/fmodules/fmshr.htm
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://www.sapdevelopment.co.uk/hr/hrhome.htm
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
sites regarding hr-abap:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPA/PAPA.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAPD/PAPD.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYINT/PYINT_BASICS.pdf
http://www.atomhr.com/training/Technical_Topics_in_HR.htm
http://www.planetsap.com/hr_abap_main_page.htm
You can see some Standard Program examples in this one ...
http://www.sapdevelopment.co.uk/programs/programshr.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci1030179,00.html?Offer=SAlgwn12604#Certification
http://www.erpgenie.com/faq/hr.htm.
http://www.planetsap.com/hr_abap_main_page.htm
http://www.sapbrain.com/TUTORIALS/FUNCTIONAL/HR_tutorial.html
These are the FAQ's that might helps you as well.
http://www.sap-img.com/human/hr-faq.htm
http://www.sapgenie.com/faq/hr.htm
http://www.planetsap.com/hr_abap_main_page.htm
http://www.atomhr.com/library_full.htm
HR Long texts Upload
Look at the below link
BDC - hr maintain text
Please refer to the following sample program for accessing PCH LDB.
For concept to start with refer url:
http://www.sap-press.de/download/dateien/860/sappress_mysap_hr_technical_principles2.pdf

Need Help Fast! Page is dispalying twice in quiz

I have created a quiz using tips from another post in this
forum. I insterted a regular slide with a continue button before
the quiz questions. I insterted another regular slide at the end of
the questions with a re-take button that points to that first
slide. This part is working great. When I take the published quiz,
I click the continue button, and instead of continuing, the slide
redisplays. I click the button again, and it moves forward like
it's supposed to. Any advice?
I'm supposed to have these posted in our LMS today for
testing, so I need help fast!!! Thanks!!

What you're seeing is likely the result of a MS patch for IE
in response
to the Eolas patent suit.
MS recently updated IE so any content shown in a page using
the Embed,
Object, or Script tags will need to be 'activated' before
they can be
clicked (or otherwise 'interacted with').
Your home computer probably hasn't had the latest security
rollup
installed, is why you're not seeing the issue on that
machine.
There is a work around, many site mention it. This may be a
good place
to start:
http://www.macromedia.com/devnet/activecontent/articles/devletter.html
Erik
dukekelly wrote:
> Why is it that as soon as you ask for help, you find the
answer?
>
> This isn't a captivate problem at all. It's an IE
problem. Because the button
> is a control in Flash, our systems where I work are
requiring us to click the
> screen to activate the controls. THEN you have to click
the button. When I play
> the movie on my home computer, this phenomenon isn't
happening. Now, how am I
> supposed to deal with that??? ASRRGGGHH!!!
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

Need help in creating webas abap system

hi
new to create jco and techinical system need help
experts i have few faqs on creating techinical system plz help me
i have 4.7ee r/3 and portal 2004s sp9
wer can i find these values plz give me navigation
SID == ?
MESG SEVER PORT ===?
to add application server
application host name ==?
application instance number ==?
client number ==?
logical client name ==?
it is asking to select a software component wat we have to select to finish
wen i gave some dummy values
i get an error
CIM_ERR_ALREADY_EXISTS: Instance already exists: SAP_BCApplicationServer.CreationClassName="SAP_BCApplicationServer",Name="C11.Number.00.HostName.rama"
is it necessary to have WAS in r/3 to connect to portal plz explain

i want to use jco
but for that we need to create a techinical system
i followed these steps for techinical system
1 Step
selected web as abap
2nd step
sid = PRD
installation number== INITIAL
database host name== super
3rd step
message server name = 3600+instance
i took system number from sap gui(21)
so i gave 3600+21=3621
central application sever
instance number ==21
next pressed button -->add new logon group
entered longon group == entered value
which i found in t-code -smlg
4th Step
Add application server
host == gave r/3 ip 198.168.0.2
instance==21
client number = 800
logical client = left it empty
5 th step
selected one componenet and finished
after this i created the jco
1st Step general data
name =test1
client=800
2nd step j2ee cluster
checked the box
use local j2ee engine
3rd step
selected dictionary meta data
4 th
selected the techinical system
5th
user name -->sapuser
pasww-->india
pressed finish
now i found the jco in green color
but i pinged it
i got mesg
ping failed

Need Help in Dreamweaver CS3

I so desperatly need help with using creating Websites. First
of all I should let you know that I was placed in this position
becuase the girl before me quit and they had no one else to take
over. Dont get me wrong I really do like the software but I feel
lost and I have asked several people who do know how to use the
program . One person I asked is the webmaster for the area but when
I went to her for help she created a new site for us. That was not
what I wanted. I wanted a hands on expierience but didnt get it and
she always takes over. We even had tech support for a year but this
lady was either away or didnt help. I have also asked the
surrownding area webmasters for help and havent heard from them
either. So I sincerly need help. I am no giving up and I'm
determined to figure the program out. So If there are any Angels
out there please help.

The only way to get yourself out of this hole is to forget
about learning
the tool, and concentrate on learning the technology. Study
HTML and CSS,
and you will find that you don't need to learn anything about
DW to use it
effectively.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"birdy2" <[email protected]> wrote in
message
news:gidvs8$gda$[email protected]..
>I so desperatly need help with using creating Websites.
First of all I
>should
> let you know that I was placed in this position becuase
the girl before me
> quit
> and they had no one else to take over. Dont get me wrong
I really do like
> the
> software but I feel lost and I have asked several people
who do know how
> to use
> the program . One person I asked is the webmaster for
the area but when I
> went
> to her for help she created a new site for us. That was
not what I
> wanted. I
> wanted a hands on expierience but didnt get it and she
always takes over.
> We
> even had tech support for a year but this lady was
either away or didnt
> help.
> I have also asked the surrownding area webmasters for
help and havent
> heard
> from them either. So I sincerly need help. I am no
giving up and I'm
> determined to figure the program out. So If there are
any Angels out
> there
> please help.
>

I can't get the product i bought need help NOW doesn't let me connect when i have good internet

i can't get the product i bought need help NOW doesn't let me connect when i have good internet

[personal information should not be posted - https://forums.adobe.com/docs/DOC-3731]
[This is an open forum, not Adobe support, please do not post personal information]
https://www.adobe.com/account.html to check your subscriptions
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

I need help for Java3D

I created a Java3D java file. I compiled it in a .class file, and I added it in a .htm page (http://www.exacodes.be/BouncingBall.htm) and it doesn't work by my friends computers.
At school I was able to see in the console that the Geometry class wass missing ... Where can I find this class and how can I add it to my class ?
IS there an other method ?
Thanks.

Welcome to the Sun forums.
fatidee wrote:
the interface for these programs is not displaying and the program is not running because there is no main( ) class in any of the programs..So add one!
The classes contains methods only..Is it possible for a program to run without a class??No.
Please fix that sticky '?' key. One '?' indicates a question, whereas 2 or more often indicates a bozo.
..or is there a way i should place a class on top of the other or on top of a main Project?That reads like nonsense to me. I cannot figure out what you are asking.
To make it easier on the reader, please add two spaces between each and every sentence, and make the first letter of every sentence upper case. The upper case letter makes it easier for people to quickly scan the text, looking for ways to help. You would not want to make it harder to help, would you?
pls i need help.Please make the effort to [write well|http://catb.org/~esr/faqs/smart-questions.html#writewell]. That word is 'please', not 'pls'.
..Below are the Java3D codes:When posting code, code snippets, HTML/XML or input/output, please use the code tags. The code tags protect the indentation and formatting of the sample. To use the code tags, select the sample and click the CODE button.
Java 3D is not an API for newbies. Your questions strongly suggest to me that you are not very experienced with Java, so it might be best to leave Java 3D aside for a while as you get used to writing and debugging simpler Java programs.

Need help with SQL retrieval for previous month till current date

Hi ,
Need help generating statistics from previous month from date of enquiry till current date of enquiry.
and have to display it according to date.
Date of enquiry : 03/02/2012
Application Type| 01/01/2012 | 02/01/2012 | 03/01/2012 |...... | 31/01/2012 | 01/02/2012 | 02/02/2012 | 03/02/2012 |
sample1 20 30 40
sample 2 40 40 50
sample 3 50 30 30
Hope you guys can help me with this.
Regards

Hi,
932472 wrote:
Scenario
1)If i run the query at 12 pm on 03/2/2012. the result i will have to display till the current day.
2)displaying the count of the application made based on the date.
Application type 01012012 | 02012012 | 03012012 | ..... 01022012| 02022012|03022012
sample 1 30 40 50 44 30
sample 2 35 45 55
sample 3 36 45 55Explain how you get those results from the sample data you posted.
It would help a lot if you posted the results in \ tags, as described in the forum FAQ. {message{id=9360002}
SELECT     application_type as Application_type
,     COUNT (CASE WHEN created_dt = sysdate-3 THEN 1 END)     AS 01012012 (should be getting dynamically)
,     COUNT (CASE WHEN created_dt = sysdate-4 THEN 1 END)     AS 02022012
,     COUNT (CASE WHEN created_dt = sysdate-5 THEN 1 END)     AS 03022012
, COUNT (CASE WHEN created_dt = sysdate-6 THEN 1 END)     AS 04022012
FROM     table_1
GROUP BY application_type
ORDER BY     application_typeThat's the bais idea.
You can simplify it a little by factoring out the date differences:WITH got_d     AS
     SELECT     qty
     ,     TRUNC ( dt
          - ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                    , -1
          ) AS d
     FROM table1
     WHERE     dt     >= ADD_MONTHS ( TRUNC (SYSDATE, 'MON')
                    , -1
     AND dt     < TRUNC (SYSDATE) + 1
SELECT     SUM (CASE WHEN d = 1 THEN qty END)     AS day_1
,     SUM (CASE WHEN d = 2 THEN qty END)     AS day_2
,     SUM (CASE WHEN d = 62 THEN qty END)     AS day_62
FROM     got_d
See the links I mentioned earlier for getting exactly the right number of columns, and dynamic column aliases.

XI Realtime scenarios-need help

Hello experts,
I am new to XI and I need help with real time XI scenarios.
can you please give me 2-3 examples of What kinds of systems involve in data transfer (both sap and non sap) for transfer of what kinds of data (general IDOCs, RFCs and other kinds of data)
and what is the purpose of that scenario? also how many times the data will be transferred between the systems?
Thanks in advance,
Haritha.
useful answers will be rewarded ***

Hi Haritha,
Hi,
Please go through the following are the links.
Maybe this is a good start:
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm>
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
<https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]>
This might help you
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm>
Further, this thread deals with everything that is needed for a starter
on XI. Do check them out,
JDBC Receiver: exact SQL statement
<JDBC Receiver: exact SQL statement>
/message/527697#527697 [original link is broken]
</message/527697#527697 [original link is broken]>
And after you are done with the documentation probably you can go
through this scenario,
JDBC Receiver: exact SQL statement
<JDBC Receiver: exact SQL statement>
Also check the following threads which might help you a little more,
Learning XI
<Learning XI>
XI 3.0 Training
<XI 3.0 Training>
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db
<https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/13926f23-0a01-0010-149c-c1170e7a25db>
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
</people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i>
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
</people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii>
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
</people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii>
and once you are through ...follow the following links to weblogs which
explain all the basic scenarios in XI
Following are the links to weblogs which will help to develop the basic
scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
</people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters> - IDoc to
File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
</people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy> - ABAP
Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
</people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30> - File to
JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
</people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy> - File to
ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
</people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1> - File to
File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
</people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2> - File to
File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
</people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping> - Any flat
file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
</people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit> - File to
RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
<https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - File to
Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i
</people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i> - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
</people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii> - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
</people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address> - Dynamic
Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi
</people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi> - Message
Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
</people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm> - Walk
through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm
</people/siva.maranani/blog/2005/05/22/schedule-your-bpm> - Schedule
BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
</people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi> - Use of
Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
<https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]> - Use of
Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally
</people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally> - Maintain
RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u
</people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u> -
Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
</people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party> - Handling
different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi
</people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi> - Modeling Integration
Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
</people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible> - Testing
of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects
</people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects> -
Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
<http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm>
- Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
</people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step> - Alert
Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
</people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide> - Trouble
shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi
</people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi> - Call
UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
</people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi> -
Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping
</people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping> - Using
ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
</people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure> - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
</people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm> -
Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces
</people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces> -
Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
</people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14> - The same
filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
</people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine> - Payload
Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
</people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i> - XI :
Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
</people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter> - XI: HTML
e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated
</people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated> - XI :
FAQ's Provided by SAP
Books from SAP PRESS...add this link to your favourites...
http://www.sap-press.de/international?GalileoSession=97477303A3.xx-M0Y78
Real World Scenarios of SAP XI ...VERY VERY GOOD....AWESOME
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/0
b95b488-0701-0010-57b9-e861b1ad572f
Check this up:
Exchange Infrastructure How-to Guides for SAP NetWeaver 2004 [original link is broken] (how to guides)
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm (very nice XI help)
Here is some scenarios from SDN:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to il
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by
SAP
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/6051-Performance [original link is broken] [original link is broken] [original link is broken] [original link is broken] Tuning for PI
Please give reward points if it is useful.
Regards,
Sai.

Need help with 1 thing

I followed a tut and learned how to do everything I'll need.
I'm a kid, so I don't need to be professional about anything.
Anyways, the tutorial left out the last part. How to publish your
website. It said to find a guide in the help from dreamweaver, but
I didn't find it. If anybody could sum it up for me, simple or not,
it would be greatly appreciated.

> Would he be able to give it to me
Yes - he would relay to you the FTP login information sent to
him by his
host.
Alternatively, you could give him the files, and let him
upload them using
that same FTP information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"afghanikiddo12" <[email protected]> wrote
in message
news:famu1v$bup$[email protected]..
> Many thanks, but since I'm making the site for a friend,
I'm not exactly
> sure
> how I would get FTP access... Would he be able to give
it to me, or would
> I
> have to send him the files + give him a little tut on
what to do?
> Technically,
> I've needed help with two things now, but you answered
the first, so its
> down
> to 1, thank-you.
>

Need help in Xi faqs

Similar Messages

Maybe you are looking for