Need help install drivers and software

& well after talking with creative for a week
they finnaly gave me the hole cd for the sound blaster 5. sb0680
and then i go to set up and says this?
your version of windows operating system is not supported by this product . please
upgrade to windows 98 second edition or later versions before resuming
installation
i got windows ME ver 4.90.3000
would you guys know why its doing this ?
thanks for your time

yer its old school but 9x was the only series of OS's that were stable and fast.
any way i am sure its made for windows me as it says get windows 98 SE and above
last time i checked windows me is above windows 98 se lol creative gee you guys got real probloms . ps creative mabye trying the drivers on every OS that ment to support the driver will help very much lol and the card is just sound blaster 5.

Similar Messages

Can't install drivers and software for hp c7180 on virtual machine with no USB port

I have a virtual machine running Windows XP to use some old software that isn't compatible with Windows-7. I also would like to print to my HP C7180 all-in-one printer from the XP VM. I downloaded the entire 520MB app and driver package, and then just the 72MB driver package, but both give me errors stating:
This system does not meet one or more of the minimum requirements needed to install this product. The installation cannot continue.
Requirement/Details and Guidance
USB Drivers/This computer does not have the necessary USB software support to allow completion of a USB installation. The installation cannot continue until this is resolved.
USB Hardware/Required Action: Click Cancel to exit this software installation. In order to install this device as a USB device, please refer to your computer documentation or USB add-in card documentation for more information about USB drivers.
I don't want to do a USB installation, but a Network installation as this all-in-one is connected only to my network.
Is there any way to force this software (with an option/switch) to only do a network installation? It never gets to the part where it asks what type of install where you can choose USB or Through the Network.
A link to where I can simply download the drivers that would allow me to print only would work as I can create a local LPR printer port using the printer's IP address.
Please advise...

Hi there,
This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

MSI K8T Neo2 FIR, need help installing drivers

Hi there,
I need help with installing drivers. Here’s my setup:
CPU: AMD Athlon 64 3500+
Mainbord: MSI K8T Neo2 FIR (VIA K8T800Pro)
OS: Windows XP Professional, SP2 installed
ATI Radeon 9600 Pro
I updated per MSI Live Monitor, but when I run ‘dxdiag’, I says I have to update the ‘VIA standard host bridge’. I don’t know what this is or where it can be found. It could be I saved the updated drivers in the wrong file (F:\ Program Files\...) where F is my primary harddisk and the drivers should be saved in F:\Windows\ System 32.
Also, my hardware setup tells me there are two videocards 'installed': a Radeon 9600 Pro and a radeon 9600 Pro (secundary). Do I need to de-install the secundary one?
Here’s a piece of my most recent dxdiag:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
System Information
Time of this report: 5/22/2005, 10:22:20
Machine name: UIWDC2ARUPUS49X
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.050301-1519)
Language: Dutch (Regional Setting: Dutch)
System Manufacturer: MSI
System Model: MS-6702E
BIOS: Version 07.00T
Processor: AMD Athlon(tm) 64 Processor 3500+, MMX, 3DNow, ~2.2GHz
Memory: 1024MB RAM
Page File: 285MB used, 2687MB available
Windows Dir: F:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
DxDiag Notes
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
Sound Tab 1: No problems found.
Music Tab: DirectMusic test results: All tests were successful.
Input Tab: No problems found.
Network Tab: No problems found. DirectPlay test results: The tests were cancelled before completing.
DirectX Debug Levels
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
Display Devices
Card name: RADEON 9600 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: ATI RADEON 9600 Series AGP (0x4150)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4150&SUBSYS_000217EE&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (16 bit) (60Hz)
Monitor: Plug en Play-monitor
Monitor Max Res: 1600,1200
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6546 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 5/4/2005 04:28:54, 226816 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: n.v.t.
Mini VDD: ati2mtag.sys
Mini VDD Date: 5/4/2005 04:28:34, 1133056 bytes
Device Identifier: {D7B71EE2-0210-11CF-CC6D-0820A1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4150
SubSys ID: 0x000217EE
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.
Sound Devices
Description: Sound Blaster Live! 24-bit
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Other Files:
Driver Provider: Creative Technology Ltd.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 4000, 96000
Static/Strm HW Mix Bufs: 64, 63
Static/Strm HW 3D Bufs: 64, 63
HW Memory: 0
Voice Management: Yes
EAX(tm) 2.0 Listen/Src: Yes, Yes
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Not run
Sound Capture Devices
Description: Sound Blaster Live! 24-bit
Default Sound Capture: Yes
Default Voice Capture: Yes
Driver Name: P17.sys
Driver Version: 5.12.0001.0314 (English)
Driver Attributes: Final Retail
Date and Size: 6/4/2004 10:27:46, 840960 bytes
Cap Flags: 0x41
Format Flags: 0xFFF
DirectMusic
DLS Path: F:\WINDOWS\SYSTEM32\drivers\GM.DLS
DLS Version: 1.00.0016.0002
Acceleration: n/a
Ports: Microsoft Synthesizer, Software (Not Kernel Mode), Output, DLS, Internal, Default Port
Sound Blaster Live! 24-bit, Software (Kernel Mode), Output, DLS, Internal
Microsoft MIDI-mapper (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Creative SoundFont Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Microsoft GS Wavetable SW Synth (emulatie), Hardware (Not Kernel Mode), Output, No DLS, Internal
Registry: OK
Test Result: All tests were successful.
DirectInput Devices
Device Name: Muis
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Device Name: Toetsenbord
Attached: 1
Controller ID: n/a
Vendor/Product ID: n/a
FF Driver: n/a
Poll w/ Interrupt: No
Registry: OK
USB Devices
+ USB-hoofdhub
| Vendor/Product ID: 0x1106, 0x3038
| Matching Device ID: usb\root_hub
| Lower Filters: vulfntrs
| Service: usbhub
| Driver: usbhub.sys, 8/3/2004 23:08:44, 57600 bytes
| Driver: usbd.sys, 9/7/2001 14:00:00, 4736 bytes
Gameport Devices
PS/2 Devices
+ Standaardtoetsenbord (101/102 toetsen) of Microsoft Natural PS/2-toetsenbord
| Matching Device ID: *pnp0303
| Service: i8042prt
| Driver: i8042prt.sys, 8/4/2004 00:55:30, 53760 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ Toestenbordstuurprogramma voor Terminal Server
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: kbdclass.sys, 8/4/2004 00:57:18, 25216 bytes
|
+ HID-compliant Wheel Mouse
| Vendor/Product ID: 0x046D, 0xC03D
| Matching Device ID: hid\vid_046d&pid_c03d
| Upper Filters: LMouFlt2
| Lower Filters: LHidFlt2
| Service: mouhid
| Driver: mouhid.sys, 9/6/2001 19:04:40, 12288 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
| Driver: LHidFlt2.Sys, 12/17/2003 09:50:00, 25505 bytes
| Driver: LMouFlt2.Sys, 12/17/2003 09:50:00, 70801 bytes
| Driver: Logi_MwX.Exe, 12/17/2003 09:50:00, 19968 bytes
|
+ Stuurprogramma voor muis van Terminal Server
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 8/4/2004 01:03:48, 40840 bytes
| Driver: mouclass.sys, 8/4/2004 00:53:38, 23552 bytes
DirectPlay Service Providers
DirectPlay8 Modem Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 Serial Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 IPX Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
DirectPlay8 TCP/IP Service Provider - Registry: OK, File: dpnet.dll (5.03.2600.2180)
Internet TCP/IP Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
IPX Connection For DirectPlay - Registry: OK, File: dpwsockx.dll (5.03.2600.2180)
Modem Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
Serial Connection For DirectPlay - Registry: OK, File: dpmodemx.dll (5.03.2600.2180)
DirectPlay Voice Wizard Tests: Full Duplex: Not run, Half Duplex: Not run, Mic: Not run
DirectPlay Test Result: The tests were cancelled before completing.
Registry: OK
DirectPlay Adapters
DirectPlay8 Serial Service Provider: COM1
DirectPlay8 TCP/IP Service Provider: LAN-verbinding 2 - IPv4 -
DirectPlay Voice Codecs
Voxware VR12 1.4kbit/s
Voxware SC06 6.4kbit/s
Voxware SC03 3.2kbit/s
MS-PCM 64 kbit/s
MS-ADPCM 32.8 kbit/s
Microsoft GSM 6.10 13 kbit/s
TrueSpeech(TM) 8.6 kbit/s
DirectPlay Lobbyable Apps
Disk & DVD/CD-ROM Drives
Drive: C:
Free Space: 65.4 GB
Total Space: 76.3 GB
File System: NTFS
Model: ST380011A
Drive: F:
Free Space: 56.7 GB
Total Space: 78.2 GB
File System: NTFS
Model: Maxtor 6Y080L0
Drive: D:
Model: LITE-ON COMBO SOHC-5232K
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
Drive: E:
Model: LG CD-ROM CRD-8521B
Driver: f:\windows\system32\drivers\cdrom.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:54, 49536 bytes
System Devices
Name: VIA CPU to AGP2.0/AGP3.0 Controller
Device ID: PCI\VEN_1106&DEV_B188&SUBSYS_00000000&REV_00\3&61AAA01&0&08
Driver: F:\WINDOWS\system32\DRIVERS\VIAAGP1.SYS, 5.01.0000.3442 (English), 7/2/2003 04:42:00, 27904 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_7282&SUBSYS_00000000&REV_00\3&61AAA01&0&07
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_4282&SUBSYS_00000000&REV_00\3&61AAA01&0&04
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_3282&SUBSYS_00000000&REV_00\3&61AAA01&0&03
Driver: n/a
Name: VIA Standard PCI to ISA Bridge
Device ID: PCI\VEN_1106&DEV_3227&SUBSYS_00000000&REV_00\3&61AAA01&0&88
Driver: F:\WINDOWS\system32\DRIVERS\isapnp.sys, 5.01.2600.0000 (Dutch), 9/6/2001 18:20:18, 36352 bytes
Name: VIA USB 2.0 Enhanced Host Controller
Device ID: PCI\VEN_1106&DEV_3104&SUBSYS_70201462&REV_86\3&61AAA01&0&84
Driver: F:\WINDOWS\system32\drivers\usbehci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 26624 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Driver: F:\WINDOWS\system32\hccoin.dll, 5.01.2600.2180 (English), 8/4/2004 01:03:12, 7168 bytes
Name: VIA OHCI Compliant IEEE 1394 Host Controller
Device ID: PCI\VEN_1106&DEV_3044&SUBSYS_702D1462&REV_46\3&61AAA01&0&70
Driver: F:\WINDOWS\system32\DRIVERS\ohci1394.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:10, 61056 bytes
Driver: F:\WINDOWS\system32\DRIVERS\1394bus.sys, 5.01.2600.2180 (English), 8/3/2004 23:10:08, 53248 bytes
Driver: F:\WINDOWS\system32\DRIVERS\nic1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 61824 bytes
Driver: F:\WINDOWS\system32\DRIVERS\arp1394.sys, 5.01.2600.2180 (English), 8/3/2004 22:58:30, 60800 bytes
Driver: F:\WINDOWS\system32\DRIVERS\enum1394.sys, 5.01.2600.0000 (English), 8/17/2001 23:46:40, 6400 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&83
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&82
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&81
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Rev 5 of later USB universele host-controller
Device ID: PCI\VEN_1106&DEV_3038&SUBSYS_70201462&REV_81\3&61AAA01&0&80
Driver: F:\WINDOWS\system32\drivers\usbuhci.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:38, 20480 bytes
Driver: F:\WINDOWS\system32\drivers\usbport.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 142976 bytes
Driver: F:\WINDOWS\system32\usbui.dll, 5.01.2600.2180 (Dutch), 8/4/2004 01:03:24, 76288 bytes
Driver: F:\WINDOWS\system32\drivers\usbhub.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:44, 57600 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_2282&SUBSYS_00000000&REV_00\3&61AAA01&0&02
Driver: n/a
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_1282&SUBSYS_00000000&REV_00\3&61AAA01&0&01
Driver: n/a
Name: VIA Bus Master IDE Controller
Device ID: PCI\VEN_1106&DEV_0571&SUBSYS_70201462&REV_06\3&61AAA01&0&78
Driver: F:\WINDOWS\system32\DRIVERS\viaide.sys, 1.00.0001.0001 (English), 8/3/2004 22:59:44, 5376 bytes
Driver: F:\WINDOWS\system32\DRIVERS\pciidex.sys, 5.01.2600.2180 (Dutch), 8/3/2004 22:59:42, 25088 bytes
Driver: F:\WINDOWS\system32\DRIVERS\atapi.sys, 5.01.2600.2180 (English), 8/3/2004 22:59:44, 95360 bytes
Name: VIA Standard Host Bridge
Device ID: PCI\VEN_1106&DEV_0282&SUBSYS_00000000&REV_00\3&61AAA01&0&00
Driver: n/a
Name: Sound Blaster Live! 24-bit
Device ID: PCI\VEN_1102&DEV_0007&SUBSYS_10061102&REV_00\3&61AAA01&0&30
Driver: F:\WINDOWS\system32\ksuser.dll, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:14, 4096 bytes
Driver: F:\WINDOWS\system32\ksproxy.ax, 5.03.2600.2180 (Dutch), 8/4/2004 01:03:38, 130048 bytes
Driver: F:\WINDOWS\system32\drivers\ks.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:15:22, 140928 bytes
Driver: F:\WINDOWS\system32\drivers\drmk.sys, 5.01.2600.2180 (English), 8/3/2004 23:08:00, 60288 bytes
Driver: F:\WINDOWS\system32\drivers\portcls.sys, 5.01.2600.2180 (English), 8/3/2004 23:15:50, 145792 bytes
Driver: F:\WINDOWS\system32\drivers\stream.sys, 5.03.2600.2180 (Dutch), 8/3/2004 23:08:04, 48640 bytes
Driver: F:\WINDOWS\system32\wdmaud.drv, 5.01.2600.2180 (English), 8/4/2004 01:03:40, 23552 bytes
Driver: F:\WINDOWS\system32\CtDvInst.dll, 0.00.0000.0008 (English), 7/25/2003 11:35:48, 131072 bytes
Driver: F:\WINDOWS\system32\drivers\ctoss2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:47:38, 178672 bytes
Driver: F:\WINDOWS\system32\drivers\ctsfm2k.sys, 5.12.0001.0172 (English), 9/22/2003 02:48:06, 130192 bytes
Driver: F:\WINDOWS\system32\sfman32.dll, 5.12.0001.0130 (English), 8/17/2001 08:35:46, 36864 bytes
Driver: F:\WINDOWS\system32\sfms32.dll, 5.12.0001.0172 (English), 9/22/2003 02:51:52, 172032 bytes
Driver: F:\WINDOWS\system32\ct2mgm.sf2, 9/22/1999 09:18:00, 2167684 bytes
Driver: F:\WINDOWS\system32\P17res.dll, 5.12.0001.0308 (English), 3/29/2004 04:02:48, 136704 bytes
Driver: F:\WINDOWS\system32\P17.dll, 1.00.0001.0029 (English), 4/8/2004 04:37:40, 60928 bytes
Driver: F:\WINDOWS\system32\drivers\P17.sys, 5.12.0001.0314 (English), 6/4/2004 10:27:46, 840960 bytes
Driver: F:\WINDOWS\system32\drivers\Pfmodnt.sys, 3.00.0000.0003 (English), 3/5/2003 12:19:28, 15840 bytes
Driver: F:\WINDOWS\system32\A3d.dll, 80.00.0000.0003 (English), 4/11/2002 03:41:06, 65536 bytes
Driver: F:\WINDOWS\system32\P17CPI.dll, 1.00.0000.0002 (English), 10/2/2003 12:48:18, 53248 bytes
Name: Ethernet-controller
Device ID: PCI\VEN_10EC&DEV_8169&SUBSYS_702C1462&REV_10\3&61AAA01&0&58
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&61AAA01&0&C3
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&61AAA01&0&C2
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&61AAA01&0&C1
Driver: n/a
Name: PCI standard host CPU bridge
Device ID: PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&61AAA01&0&C0
Driver: n/a
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Help would be very much appriciated, thnx!

The two vis.cards issue is normal, it sees the primary output (VGA) as a device and the TV-out a separate device.
Go to device manager to see if there's any device on ur rig that doesn't have drivers.
Did u install the 4-in1 drivers, get the latest version from the MSI support site.
good luck.

I need help installing drivers...

I recently bought this computer used from a large corporation. They removed the hard drive, but left the rest of the computer intact. I put in a new hard drive and installed Windows 7 on the computer. My problem now is I need to install the drivers for the computer, as it has none installed. I went to the HP driver download site and they only have drivers for windows 8.1. I still used my other computer to download the driver and then used a flash drive to install to my computer. It would not install as it is the wrong os. How can I install drivers on the computer? Please, help. thank you.

Hi: See if some of the W7 x64 drivers from this model work on yours. Do not use any of the BIOS or firmware files. http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-700-200-Desktop-PC-series/5399651/model/6667346 It has a similar hardware configuration but not exactly the same. Let me know what devices are left that still need drivers.

Need Help Installing Rescue and Recovery 4.3 Windows 7

Hi there,
So I'm having a strange issue installing Rescue and Recovery 4.3 on my TP T61. I keep getting an error message stating: "It is required to install the Microsoft Visual C++ 2005 Redistributable (x64) Service Pack 1 before you install the Rescue and Recovery program."
I have already installed C++ SP1. I've also tried installing/uninstalling it as well. Still no luck!
Here is a link to the installer:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-73612
And here is a link to the C++ SP1 file:
http://www.microsoft.com/downloads/details.aspx?FamilyID=200b2fd9-ae1a-4a14-984d-389c36f85647&displa...
Any Ideas?
Thanks,
Peednus
T61
T7100 @ 1.8 GHz Duo
2GB RAM
Windows 7 Home Premium (x64) (Clean Install)
T420s, i5-2520M @2.5, nVidia 4200m, 8GB DDR3, OCZ Vertex 3 Max IOPS 240GB SSD, Hitachi 320GB @7200rpm ulrabay, 8Pro x64
T61, Centrino Duo @1.8, GM965, 4GB PC2-5300 DDR2 @667MHz, OCZ Agility 120GB SSD, 7Pro x64

Hi peednus,
The C++ 2005 SP1 installer you are trying to use is for x86 (32 bit). The error message you quote says it needs the x64 (64 bit) version. Try
Microsoft Visual C++ 2005 SP1 Redistributable Package (x64)
If you're really running a 64 bit Windows install, that should/might get you going.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Need help installing drivers

I have a KT4A Ultra FISR motherboard and I just downloaded Broadcom 5702 LAN Drivers and the audio drivers.
Unlike the VIA 4 in 1 drivers download, which had an setup installer icon, the LAN and the Audio driver downloads do not. How do I install those two drivers?

for sound: double click on cm45xp.exe then extract files into your specified folder.
then go to device manager, find the yellow device with question mark, select it and right click with mouse on it. select update driver and folow instruction, asnwer with i will choice drivers to install, then point to the folder where files from archive was extracted.(your specified folder)
for broadcom: extract files from BCM4401_NP01.zip to specified folder. then repeat some procudere but point to the sub folder depend of your OS which you are using.
if you are unsure which yellow device is for sound which for one, delete it both from device manager then select computer and click "scan for hardware changes" (or reboot PC) then hardware detection wizard should popup, for "multimedia controller" load your sound drivers, for "ethernet controller" load your broadcom drivers.

T60- Need help installing drivers

I have a T60, I believe I accidently deleted some important drivers so that my screen will work properly. After the system boots, the last thing I see is the Windows XP screen. Then nothing. I am able to press the ThinkVantage key right away and use the support through that browser, I downloaded the current ATI graphics drivers, but am unable to install them as the instructions are for computers that are working properly. Any suggestions would be greatly appreciated, as the last thing I want to do is a full system restore.
Thanks!!!!

Try these drivers:
http://staff-www.uni-marburg.de/~schmitzr/ATIPOWPL.zip
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Need help installing Canon MG6220 using 10.8.2

Need step by step walk throught on how to install drivers and software.
Thank You for Your Time and Effort!!!

OK, perhaps I should have said "drivers are automatically installed in 10.8". The point is that the OP should not have to do any special install process. And actually some drivers are installed in 10.8 even if no printer is connected. I have Canon drivers on my system though I've never connected any Canon printer to this Mac.
Regards.

I currently use photoshop elements 10 on my laptop. My laptop has crashed and i need to install the exsisting software on my new laptop. please help?

I currently use photoshop elements 10 on my laptop and my laptop crashed. I need to install the existing software on my new laptop. please help!

Yes you can directly use the upgrade version.
You can visit this page Photoshop Elements (PSE) knowledge base. for further assistance.
Regards
Kishan

I need help installing my adobe premiere element 13. the soft ware is 3.5 GB and I have a 654.4GB space is this enought space to dowload the software. It appears the software is downloading , but when it gets to the end it gives me the error summary messa

I need help installing my adobe premiere element 13. the soft ware is 3.5 GB and I have a 654.4GB space is this enought space to dowload the software. It appears the software is downloading , but when it gets to the end it gives me the error summary message. I have been on the phone for hours being transfered from from person to the next with no results.

reesep
This is not Adobe. Rather user to user. The Adobe Staff and PRE_help presence in this forum is undefined.
The replies from here are not instantaneous. But, your fellow users all try to respond as timely as possible.
What is your computer operating system?
From where are you downloading Premiere Elements 13....direct from Adobe as the tryout or the purchased product? If the purchased product, do you now have a purchased serial number to go with the installation files?
Where are you stopped in the installation....at the Sign In or before? Is the faulting module cited in any messages? What are the error messages?
The usual questions:
1. Are you working with the antivirus and firewall(s) disabled?
2. Are you running the computer programs as administrator?
3. Are you working with a pen and tablet device instead of mouse?
4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
5. Are you installing the program to the default location on the Local Disc C (if Windows).
Let us start here and then decide what next based on the details that you post. Subsequent troubleshooting may include:
deletion of the Adobe Premiere Elements Prefs file and/or uninstall, free ccleaner run through, reinstall with antivirus and firewall(s) disabled.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Is it possible to install Windows 7 without using BCA to install drivers and using the support 5 software for drivers on my iMac 2014?

What I am wondering is if I can install Windows 7 on my iMac 2014 without using BCA to install drivers and using the manual download Support software without bricking my system. The issue is that I recently moved into the country without a reliable data connection, so I'd like to download all the drivers from when I'm in town generally. Any info is appreciated.

Mikhailov wrote:
Hello,
I'm trying to purchase inexpensive computers for my classroom. One of the computers I'm looking at is the new $200 HP Stream 11. My school's IT department said it might be difficult to install the district's copy of Windows 7 on these computers if I purchase them. Does anyone know if it's actually possible to uninstall Windows 8.1 and install Windows 7 using an external USB or external CD Rom Drive? Any help would be greatly appreciated.
The District is right to say what they told you they can't install Disctrict Windows 7 on your computer because they have a license agreements with MS and doing so will violate their Terms of Agreement. And you shouldn't be asking something like that to start with. If that laptop can't install Windows 7 it then your stuck with WIndows 8 unless HP has downgrade to go back to Windows 7 on it otherwise if none exist you will not get any drivers or support for it. You best luck is to find a used Windows 7 laptop and order the HP recovery media for it and wipe it clean to factory install and register it to you and that will give you a Windows 7 maching to start with.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

HT1338 Need help locating where and how to update Mac OS-X 10.6.5 to the latest Mountain Lion Software...thanx John

I need help locating where and how to update Mac OS-X to Mountain Lion.....Thanx....Jay

First update your 10.6 version to 10.6.8 from the software update under the Apple Menu.
This will add direct access to the Mac App store via a new application.
Now launch the App Store from your Applications folder - Its the new icon a letter A formed from a ruler pencil and pen on a blue circle !
Once launched you need to add your iTunes account details or create an account add payment details etc...
Sign in purchase download and follow install processes to upgrade to 10.8 Mountain Lion.
OH and to be safe BEFORE you install backup your current system to an external drive !

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: AD012822594 1057-0247-4177-3303-6451-8067 or 1057-0904-6949-7119-8323-9165

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: AD012822594 1057-0247-4177-3303-6451-8067 or 1057-0904-6949-7119-8323-9165

Please do not share serial numbers or Order numbers on Forums . Serial numbers and order numbers are very confidential.
You can only share serial number with Adobe Customer support staff.

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: Serial number removed by moderator

I need help in downloading and installing a previously purchased version of Photoshop Elements 12: <Serial number removed by moderator>

Hi There,
Kindly try: Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
Thanks,
Atul Saini

Need help install drivers and software

Similar Messages

Maybe you are looking for