Need Help Installing Final Cut Studio Version 2.0.1 on Macbook Pro

I am trying to install an old version of Final Cut Studio (Final Cut Studio Version 2.0.1) on my macbook pro (OS X Mountain Lion). When I tried to install it, it said, "power pc applications not supported on this computer". I was told to "uninstall" OS X on my computer, install Final Cut Studio, and reinstall OS X Mountain Lion again. Is this true? If so, how do I do this?

There is a "bug" in the installer application of Final Cut Studio Pro 2 that will fail to work in Lion or Mt. Lion; it will work successfully in Snow Leopard and a subsequent upgrade to Lion or Mt. Lion after the successful installation of FCSP2 will continue to work.
Once Mt. Lion is installed you can use one of these two methods to install FCSP2:
1) Pacifist
2) Jeremy Johnstone's Terminal method:
http://www.jeremyjohnstone.com/blog/2012-03-11-installing-final-cut-pro-studio-2 -0-on-mac-os-x-10-7-lion.html

Similar Messages

What do I need to do to install Final Cut Studio version 2 on a new Mac Book Pro

What do I need to do to install Final Cut Studio version 2 on a new Mac Book Pro that does not support power PC anymore

You need to install Rosetta from a OSX 10.6 install disk.
FCS2 is intel native, it is only the installer that requires PPC support.
x

Help - installing final cut studio keeps failing

I am trying to install final cut studio - I selected all options for download, got to the part where the audio content 1 disc was asked for, at some point in that it asked for the original install disc - which I put back in, and then the installation failed.
I attempted re-installation 3 more tomes - always failing at this point.
Anyone experienced this or know what I should do now?
ThankYou

Hello
I did as You suggested and it still fails at the same place, with the same generalised message - ie "the Installer encountered an error that caused the installation to fail".
Can it be an issue to do with licensing? My co-worker and I work in the same organisation - he has it loaded onto his macbook pro and said it had two "usages" available, and so I would be able to do the same(the organisation owns the software). I may be a bit innocent(!) but it wouldn't suprise me if programmers embedded such checking procedures to take place during installation - and the message given in relation to it be general - like it's failed but not specifically saying why. Or am I being overly "worried"!!!

Installing Final Cut Express 2.0.2 On to MacBook Pro

Having just received my new MacBook Pro and after installing Final Cut Express 2.0.2 onto it I get the error message:
Configuration error
This software requires certain hardware or software which is missing
• AGP graphics card.
The laptop is the top spec version just out and fully rammed up!
Can anyone help?
Sorry-just read the explanation underneath

Coyboy,
Welcome to the forum.
One of the great things about this very active forum is that first time users almost always are asking about well known problems. This is to your great advantage.
There is a search function located in the upper right portion of the window that works quite well. Had you typed in AGP installation error or something like that you would have hit upon dozens of threads that are all about your issue.
For example this one: http://discussions.apple.com/thread.jspa?threadID=411833&tstart=0
Come often, learn to search, read the threads, learn lots.
cheers,
x

Which system for Final Cut Studio upgrade...iMac or MacBook Pro?

I am currently using FCE on a Powerbook G4 and am considering upgrading to Final Cut Studio. Which system would give me better performance: New iMac 24" (2.8 Penryn processor) or MacBook Pro (2.5 Penryn processor)? Does the NVIDIA graphics card for the iMac upgrade significantly improve editing performance.. or is the AGI 2600 Pro card sufficient? Anything else worth considering when comparing these systems?
Any input is appreciated... thanks.
Message was edited by: Jeff Morgan1
Message was edited by: Jeff Morgan1

FW 400 is enough to deal with DV footage,
Not all HD formats require eSATA drives, DVCPRO HD for example can be handled by FW 400 or FW 800 drives and HDV streams pretty much the same DV does.
Things change if at some point you need to deal with Uncompressed SD or HD, ProRes etc.
eSATA then would become mandatory.
If you'd like to set up a desktop then MacPro is what I suggest.
If you don't make a living from editing then I guess an iMac will do for a while.
A MacPro allows you to host/replace multiple internal drives, host/replace capture cards or GPUs if you need for business purposes.
Increase RAM up to 32GB etc
iMac does not offer such options.
Your call,
G.

How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
Does anyone know how I can obtain Rosetta? Or another way to install this without it?
Thank you ! :)

There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

7 Hours to Install Final Cut Studio 2??

I just installed Final Cut studio 2 on my Brand New Mac Pro and it took 7 hours... I installed it on my other Mac Pro back in May and it maybe took maybe an hour. I was just going to ask and see if this was normal or if I should be concerned. I have also put a black magic card in the machine and run into some issues with that as well.
Thanks for any thoughts you may have.

Here's the trick you NEED to know.
Once you know how to do this you will never again need to waste an entire evening inserting DVD's.
1) Make disk images of all your DVD's using Disk Utility. Be sure to save them as DVD/CD Master in the Image Format dialogue box, with no compression added. Save all the disk images to an external drive if possible. Final Cut Pro users all have big external drives, but in a pinch this would work off an internal drive if you have the space.
2) Mount all of the DVD copies on your desktop, all of them at one time. This assumes you have ample memory, which if you are running Final Cut Pro you'd better have.
3) Start the install. Select your options. Then watch the magic as your Mac loads the DVD copies on your desktop until the process is done. It's that easy.
It takes a while to make the disk images, but once you have them saved to your external drive you can use them again when you get a new machine or need to reinstall for any reason. This works with Logic Studio as well as the Adobe suites- I've used this process for years. In the old days we used this process for floppies; works just as well with CD's and DVD's. Once you try it you will be dedicating an external drive to software installer disk images.
Cool, or what?
Message was edited by: bigwheel

Can I install Final Cut Studio 3.0 after already having FCP X?

I have already installed FCP X on one of my computers. I need to install Final Cut Studio 3.0 on the same computer now.
When I tried to install, I get the selection screen and Final Cut is ghosted out and unavailable.
Is there a way around this? I know FCP X can co-exist with Final Cut Studio 3.0 if it's installed afterward, but I need to know if I can install Final Cut Studio after FCP X which I imagine is a fairly rare situation.
I'm on Lion -- in case that matters.
_Matt_

I'm not positive, but I believe that FCPX installer is aware of FCS. If you intsall FCPX and FCS is already on your computer, the FCPX installer will move FCS into a folder inside Applications. I'm sure FCS installer is not aware of the existance of FCPX.
I would guess that you would have to uninstall FCPX, install FCS and then, if you wanted, re-install FCPX, using the App Store.
I have not actually done this, but I'm guessing that having FCPX already on your computer is what's causing issues with the FCS installer.

Help in installing Final Cut Studio 5.1 Academic

Help! I had to uninstall old versions of Final Cut Studio.
I now am trying to install Final Cut Studio 5.1 Academic. Installer rejects the serial number every time. I don't know what to do.
It's a valid serial number; I have the packaging right here in front of me. It's old (purchased November 2006) but that shouldn't matter, right?
Please help.

Hello Brian,
Thanks for the reply. I was able to read the disc on my Macbook Pro and I copied all of the folders on the install disc onto my flash drive. I plugged it into my iMac and it gave me the following error message: The alias "Install Final Cut Studio" could not be opened, because the original item cannot be found. Delete Alias, Fix Alias, or OK. Deleting the alias just moves the install file to the trash bin. Fixing the Alias asks me to Choose the item that you want alias to "Install Final Cut Studio" to open.
I could not figure out what to do after this. Any clues?
Thanks again.
Steve

Imac won't let me install Final cut studio 2..it will let me install the upgrade, but it has no live type and i need it to work on my current projects. How do I get Live type back installed in iMac

I just purchased an iMac for home and went to install final cut studio 2 and it gave me an error saying something about "PowerPC" not used or something like that. Installed the studio upgrade just fine...but it has no "Live Type" which I need to work on projects I have been using in my Mac Pro at my work place. How do I get "Live Type" to install in this iMac? Downloaded Live Type upgrade but that won't update cause there's no "Live Type" in the applications.

It sounds like you have Lion installed on your new imac, although your profile says SL 10.6.8 (you may want to change this.)
If you have the Snow Leopard install disc I believe you can install "Rosetta" from the extras folder which will then, if you have the original FCS2 discs , allow you to select and install Live Type and LIve Type content only from the custom install options.
I hope this will work for you.
DM

Help with installing Final Cut Studio package

I have a copy of Final Cut Studio 2.0.1. I would like to know if there is a way to create an image file to combine all disks into 1 file. This would help in installing, since I only have one set of disks. I don't want to risk ruining any of the disks, since I have a lab of 30 computers to install Final Cut Studio 2 on.
I have the following disks:
Final Cut Studio Install
Audio Content 1
Audio Content 2
Audio Content 3
Motion Content
LiveType Media 1
LiveType Media 2
DVD Studio Pro Content
Thanks, any help is greatly appreciated.

Shane, I have all 8 FCP disks saved as a dmg file. I am currently storing these in a share on our NEW Apple XSERVE. I have tried mounting all of the 8 dmg files to the desktop of the iMac, that I'm wanting to install on. But this takes an unusally long time, I cancelled it after a couple days of it trying to mount the images to the desktop.
I'm very green to using Apples, just something that has been dropped in my lap.
Is there a way that I can mount these images in the folder on the Xserve? of is using a portable HDD the only way to do it.

As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?

As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?
It may have half installed the software so dose anyone know if i can reinstall or delete what it has installed?

after using FCS remover run disc repair:
shut down the Mac
Hold the Shift key on keyboard and start up the Mac
The Mac will run the repair tasks it takes 10- 30 minutes, then it will boot up normally
insert the FCS DVD in the drive and install FCS again.

How can Install Final Cut Studio in my Mac Pro Early 2009 ??

I have Final Cut Studio 7 NOT installed yet and Mac Pro Early 2009 with OSX 10.9.5. I have Final Cut Pro X Version 10.1.4 installed. Can I installed Final Cut Studio here together with FCPX ?? Maybe not. What is the best way to install FCP Studio??
Do I need to make a partition? How? If so, what is the best OSX Version for FCP Studio ?? 10.6, 10.7, 10.8, 10.9 ??
Thanks for any help I can get
Alberto Marban

Here is the Best Practice Guidelines from Apple:
Final Cut Pro X, Motion 5, Compressor 4: Installation best practices - Apple Support
MtD

Cannot install Final Cut Studio on new Mac Pro

When I go to install Final Cut Studio on my new Mac Pro, it tells me that "Final Cut Studio Installer requires that your system have a Quartz Extreme capable video card."
I have the ATI 5870 and, just a wild guess here, I'm betting it does support Quartz Extreme.
A software update doesn't help me here because I cannot get the software installed the first place to be able to update it. What should I do?

FCS 1...Final Cut Pro 5.0? Won't work on an Intel. PowerPC only. You need at least 5.1...which wasn't a free upgrade, so updating won't work. You need FCP 5.1, FCP 6 or the most recent FCP 7. Those are the only versions that will work on the newer macs.
Shane

Why Can't I Install Final Cut Studio?

I have a MacBook Pro which is about 12 months old. It has a 2.66GHz Intel Core i7 Processor and 8G of RAM. I have been trying to install Final Cut Studio 5.1. Yeah I know that is an OLLLLLLLLLLLD version. Why I chose not to update is neither here nor there. I was about to update when Final Cut Pro X was realeaded and FCS vanished into the ether. I really only wanted DVD Pro but when that wouldn't install I went back to Square 1.
The specificationa as stated are:- "These discs contain the files required to install Final Cut Studio 5.1 on either PPC or Intel based Mac computers."
The error message that shows up on the screen when I click on the install package is:- "You can't open the application Final Cut Studio pro.mpkg because Power PC applucations are no longer supported."
This is despite the stated specifications and the fact that there is a Universal Icon on the discs.
I am also having a simillar but not the same problem with iLife '06 but i'll start another thread on that.
I'm confused, thanks for your help in advance.

Your problem is you are running Lion as your OS (10.7) and Lion does not support Rosetta which is required to run the INSTALLER of FCS 2. If you were running Snow Leopard, you would have been able to do the install.
MtD

Need Help Installing Final Cut Studio Version 2.0.1 on Macbook Pro

Similar Messages

Maybe you are looking for