Need help installing internet drivers for OS Lion

Howdy all! My question is in regards to the download and installation of internet drivers for a 2011 MacBook Pro running Lion. The wi-fi airport works and recognizes available networks, but I am unable to connect to the internet.
Are there any particular sites you might recommend to download internet drivers for this model and OS?
Thank you for your time!

acolverson1,
are you also unable to connect to the internet by trying your MacBook Pro at a different site, say, somewhere that offers free wi-fi? Do you have access to a different computer, to see if that different computer would be able to connect to the internet by using the wi-fi that you have at home? It sounds as though you haven’t yet determined where the cause lies yet, whether it’s with your MacBook Pro, your router, or your internet service provider.

Similar Messages

HT1199 need help installing the os x mountain lion update

need help installing the os x mountain lion software update

By default, ML no longer comes with the Java runtime preinstalled. I believe the route to enabling Java if you are going to need it is to run the Java Preferences app found in Utilities. It will inform you of Java's absence and offer to install the latest version and activate it. On subsequent runs, the Preferences app will allow you to fine tune how the runtime operates.
Note that the new default operation is for the applet plugin to be disabled. You need to enable it as needed and it self-deactivates if unused in awhile. Also important to note that Java comes in both 32 and 64 bit versions and you can set the preferred order. Default is 64-bit but I've had issues with some applets failing to run and have had to switch the order.

Need help installing adobe flash on mountain lion o/s for my mac

need help installing adobe flash on my mac with mountain lion operating system

What kind of problem are you running into? Have you gone to http://get.adobe.com/flashplayer?
Here's a help document that might assist you with common problems. If you continue to encounter problems, please post back.
Macintosh Installation Help

P6-2016 New MoBo but I need to install AHCI drivers for it to work

Hey I just got a new motherboard for a haswell processor and some new ram. The thing that I'm having trouble with is if I try to boot with the new Motherboard CPU and Ram I will get a 0x7 boot error which means that the boot drive isn't being detcted, after hours and hours of forum searching and my own troubleshooting it seems I need to install the AHCI drivers onto the HDD because HP doesn't install them when they ship the systems because thats not what mode Your computers boot in (so I've seen), but that just so happens to be the mode that my new board boots with, and well without those drivers, I'm sure you can figure it out. So here's what I did next I went onto the intel website and got their AHCI drivers but if I try to install them then it will say that my system does not meet the mnimum requirements to install the software. And well without those drivers.... I've just got $400 of new PC parts just laying on my desk.
P.S. I heard you guys will offer a free win 7 copy if I give you a product key or something like that but a clean install is the LAST THING I WANT TO DO!

HI wizardofozz:
Thank you for your inquiry.
To be able to assist you I need some additional details.
What model P6 do you have?
What OS are you running?
What was the complete error message?
What motherboard did you purchase.
What Haswell processor did you install?
What ram did you install?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Help installing sata drivers for 870-G45

I just noticed Windows 7 64-bit lists my internal sata ii drive as ata in the device manager and also won't autodetect my e-sata usb drive when I connect it. I read that I need an AHCI driver. I have a 870-G45 mobo with AMD RX780 Northbridge and SB710 Southbridge.
So I went to the msi drivers page at http://www.msi.com/product/mb/870-G45.html#/?div=Driver&os=Win7%2064 and downloaded the driver package:
ATI System Drivers for 7xx/8xx/SB7xx/SB8xx Series (except RS690, 740).
When I unzip the downloaded file "ati_system_drive_mb.zip" I get a directory called "AMD" and inside is a program called "Setup.exe"
When I run Setup.exe it wants to install a program called "Catalyst". Is this correct? It says something about managing graphics but I don't have an AMD video card.
Do I have to run Catalyst? I can see some drivers in the folder AMD->Packages->Drivers->SBDrv->SB7xx->AHCI->W764A listed as:
amd_sata.inf
amd_sata.sys
amd_xata.sys
amd_sata.msi
Can I just install these somehow?
Thanks for any help you can offer.

ok, I can explain this better.
I have an internal sata ii drive and an external esata.
Both work but for the external drive when I turn it on I have to go to 'Disk Management" and rescan drives for win7 to pick it up.
Here is my Device Manager:
See both my drives show as ATA even though they are SATA. And I have only IDE controllers listed no SATA controller.
I am trying to get the system to recognize the drives as SATA and use the SATA controller to get better performance.
Also I am trying to install AHCI so that my external drive can be auto recognized.
The only thing in my BIOS regarding AHCI is under "Integrated Peripherals->On-Chip ATA Devices->RAID Mode->AHCI
I assume it needs to be set to AHCI.

Need help identifying SB drivers for Windows 7?

/? Hi
I helped a friend upgrade his computer from XP to Windows 7 Home Premium 32 bit.
Everything is working fine except his sound. ?I can not find and install drivers for the sound card.
We had the same thing with his printer but I was able to download the drivers and install them which solved the problem. ?I think the same thing is true of the sound card.
He did not know what kind of sound card he had in his Dell E520 computer and he could not find any documentation or driver disk.
I finally used his Service Tag to get his Build Sheet from Dell
His audio is identified as "Card, Multi-media, Audio, SB0467"
I'm pretty sure this is a Sound Blaster car but haven't been able to find specific drivers for it.
Can anyone tell me what kind of card this is and steer me to a location where I can download Windows 7 compatible drivers for it.
Thanks for the help....
Mike

Dell OEM version of the Xtreme Music. These,
http://forums.creative.com/t5/Sound-Blaster/SB-X-Fi-Series-Support-Pack-2-0-05-5-2009/td-p/527485
should work without too much fuss.

Need help install flash player for IE

HOw do I install flash player for IE. Everytime I try, it gets to 50% and then stops. A pop up says I must close IE, but it is not open. How do I close IE to complete the install???? HELP!!!!!!!!!!!!!!

How to close Internet Explorer and other programs running on Windows

Need help to find drivers for Sound Blaster X-Fi MB windows seven 64bit

hello!,
I have a Creative Sound Blaster X-Fi MB card which is given whith the Foxconn motherboard BloodRage,it worked fine under windows vista 64 bit,but now with windows seven 64 bit when I go of "creative console laucher"? or "creative Audio console" "karaoke"?no works.(media source and wave studio seems ok)
I tried to find drivers for windows seven 64 bit but I can't find this sound card in the list of products.
thank you for your help

great!!!
I'm going to test it immediatly....
hope it's ok.....thanks for the very quick answer

Need Help Installing Flash CS4 For Windows

Hi, I have downloaded the two files to install Flash CS4 for Windows from here: http://helpx.adobe.com/uk/creative-suite/kb/cs4-product-downloads.html
Unfortunately, there is no explanation whatsoever provided regarding how to use the two files, and how to install my product.
I feel like I am missing something obvious here, but can someone please explain.
Kind regards,
Finn.

Try uninstalling then run the Adobe Cleaner Tool
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then double click the .exe file again.
What do I do with the .7z file?
Nothing. That's is an archive of files used by the .exe file during the installation process.

Need Help Installing Snow Leopard over Mountain Lion!!!!

Hey!!! I REALLY NEED SOME HELP!!! I had Mountain Lion installed on my Macbook Pro. I didnt like it and I wanted to downgrade to Snow leopard. I have the Install Disk with me. I went ahead and formatted my Macbook Pro. Now Im not sure what to do. Should I put the disk in?? And will it install?? And how should i install it??? All I can do as of now is boot into the Recovery HD.

Hi.
I have the same problem with an iMac - everybody gives the same response and none of the them work. Why? Possibly because the iMacs come with bluetooth keyboards and by the time the bluetooth connection has been made, it's too far into the boot sequence for "holding down the C" or "holding Option whilst pressing R", etc. to have any effect.
(Oh yeah, I've tried connecting USB keyboards and they don't work either. - possibly because they are usually Windows and I don't know which keys map to which).
It's bad enough being told to press the "Option" key on an OSX keyboard when there isn't one - at least not on English keyboards. If the Yanks mean the "Alt" key, then they should say so.
I do not get the Installer Utilities options to enable me to clear the old operating system from my hard drive, because I can't find the key combination to force a boot from my DVD drive.
I also get a message that I can't run "the (Snow Leopard?) Installer" on the current software (Mountain Lion) in order to start the regression to Snow Leopard.
So, how do I trash my current system and start again? I suppose that I could always install Windows and then OSX over the top of it. Or take the disk out and start from scratch - but I've done that once and it's a bit boring.
P.S. I was the "Backup Man" at a computer installation, so " Make sure you save this...." goes without saying.
Any different ideas guys?

Need help restricting internet usage for a minecraft server.

I have a WRT54G routher hardlined to a Ubuntu 12.04 server that is dedicated to minecraft.
I have two ports opened for Minecraft to run off of.
I'de like to give remote access to the computer to other people to help me maintain the server.
BUT I need to restrict ANY and ALL ability for them to access the internet by either blocking all other ports or something else. Id rather not have to restrict it through Ubuntu if I don't have to.
I'm a noob when it comes to figuring this out. Any help would be appreciated.
Thanks in advance,
Pat

Let me verify a couple of things. You want to have your computer remotely accessed by others to help you maintain your server, right? You also want to restrict internet access to these, correct? They won't be necessarily running off of your connection. Remote access requires for them to have internet access to begin with. If your remote desktop setup is configured and working, I don't think there is anything to worry about.

Need help installing Control panel for Creative Roar speaker!!!

I am trying to download the control panel to my Windows XP PC, or my Windows 8 laptop but when I download the try to install the control panel both my PC & laptop says, Setup unable to detect a supported product on your system. What does that mean?

hiawa23,
You need to press and hold the PLAY button to activate the sound card feature. You may refer to this article for more information.
You can also do the following if your PC is still unable to detect the speaker as a USB audio device:
1. Ensure you use the supplied USB cable. It is able to handle both power and data.
2. Power cycle the speaker (turn off and then turn it on)
3. Connect the speaker to another USB port and try again.
4. Do not use any USB hub; ensure the speakers is connected directly to your PC
5. Try to connect the speakers to another computer and then try again.
If the speaker is still not detected as a USB audio device, perform the following:
1. Hardware reset: In any state, press and hold the Power button for more than 10 seconds, and then press the Power button again to turn the speakers on.
2. Master reset: While the speaker is in pairing mode, press and hold the Multifunction and Volume down (-) button together until a voice prompt is heard that 'master reset' is completed.
Cheers,
Colin-CL

NEED HELP WITH REDEEMING CODE FOR OS LION!

im running 10.6.8 and im trying to update to Lion , im qualifyed to update free apple has sent me a code to redeem on the mac app store but i says " the code you have entered is not recognised as a valid code."
PLEASE HELP!

IVE DONE IT, IF YOUR USING HOTMAIL EMAIL - CLICK DOWNLOAD ON THE ABOVE YOU MESSAGE AND A LINK SHOULD APPEAR, YOU SHOULD HAVE GOT ANOTHER EMAIL SAYING YOUR CODE - COPY AND PASTE THE CODE YOU GOT INTO THE LINK AND CLICK NEXT OR SOMETHING, THEN YOU SHOULD GET ANOTHER CODE AND GO TO MAC APP STORE ON YOUR LEFT YOU SHOULD HAVE "QUICK LINKS" AND UNDER THAT YOU SHOULD HAVE REDEEM CLICK THAT AND TYPE IN THE CODE YOU GOT FROM THE LINK THEN YOUR DONE!
Ps. if you did not get the email check your junk/spam folders.

I need help installing drivers...

I recently bought this computer used from a large corporation. They removed the hard drive, but left the rest of the computer intact. I put in a new hard drive and installed Windows 7 on the computer. My problem now is I need to install the drivers for the computer, as it has none installed. I went to the HP driver download site and they only have drivers for windows 8.1. I still used my other computer to download the driver and then used a flash drive to install to my computer. It would not install as it is the wrong os. How can I install drivers on the computer? Please, help. thank you.

Hi: See if some of the W7 x64 drivers from this model work on yours. Do not use any of the BIOS or firmware files. http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-700-200-Desktop-PC-series/5399651/model/6667346 It has a similar hardware configuration but not exactly the same. Let me know what devices are left that still need drivers.

How can I install JDBC drivers for Oracle?!?....

i have a program that has this line:
import oracle.jdbc.pool.OracleDataSource;
that gives this error when I compile it:
package oracle.jdbc.pool does not exist
So I think I need to install JDBC drivers for Oracle. (?)
I went here: [http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/jdbc_111060.html]
and downloaded the files for JDBC Thin.
Then I followed this: [http://www.oracle.com/technology/software/tech/java/sqlj_jdbc/htdocs/111070_readme.html]
by entering these commands (I'm using Ubuntu):
export CLASSPATH=$CLASSPATH:/path/to/files/ojdbc6.jar
export CLASSPATH=$CLASSPATH:/path/to/files/orai18n.jar
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/path/to/files
When I type echo $CLASSPATH I can see that those commands worked, but it hasn't made any difference when I try to compile.
I still get the same error. Is it because I didn't do anything about the .so files? The readme page didn't mention them in the installation section.
Please help! I am so stuck...

I don't think you need the shared libraries (.so files) and given what I saw when I glanced at those pages, I don't think they'd even work for you, although maybe I just didn't read enough of it.
What happens when you type
javap oracle.jdbc.pool.OracleDataSourceon the command line?
How are you invoking javac? Are you perhaps passing a classpath argument?
Are you sure that the path to the jar files is correct? Are the paths relative?

Need help installing internet drivers for OS Lion

Similar Messages

Maybe you are looking for