Need help installing my graphics driver in windows vista via boot camp

New to mac so first time on forum as well.
Love the Mac but i also want to get on some old games. C&C The First Decade mainly.
I am currently using below.
Mac mini Mid 2011 processor 2.5 GHz Intel Core it
Memory 4 GB 1333 Mhz DDR3
Graphics AMD Radeon HD 6630M 256 MB
Software Mac OS X Lion 10.7.5
Installing windows vista home premium 32 bit
I have installed windows vista home premium using boot camp assistant and downloaded the windows drivers as well. After i have installed windows i installed boot camp using my Mac OS X snow leopard which installed boot camp 3 or 3.1 i believe and i eventually got apple updates for 3.2 which is what i am now runnning on vista. I had trouble getting my sound to play through my speakers at first but eventually got them working and now it is my graphics driver that i cannot seem to get working. In vista(I also downloaded service pack 1 and 2) when i go to control panel and check out my device control it shows a yellow exclamation point next to the adapter. I guess i need help in getting my graphics installed correctly on my windows. Is there something i should take off to install the correct driver? Or do i just need the correct driver download? If i have the correct driver how do i upload it onto my windows side in the device control.
When i try to run c&c generals/zero hour i get a directx 8.1 error, red alert 2 is black but i can hear. i know these games can work i installed the graphics correctly the first time when i did not have sound as this is my second time installing windows so the game did load when i did not have sound.
Advise?
I was thinking about saying forget this i can't waste hours of my time anymore but i have to be close to getting everything working if i had graphics before and no sound but sound this time and no graphics. I was also thinking about just buying windows 7 home premium sp1 64bit system builder dvd off amazon and reinstalling windows using windows 7 but i want to make sure i can play these games before i spend the money. I thought my mini couldn't support windows vista and if it did only boot camp 4? how am i getting this far to get things to work?
What is the driver i need to install to get these games working? What do I need to do or what am I missing???
Do i need to install a different boot camp off apple and find a driver that will get mine to work in vista?
Any and all responses will be greatly appreciated i have been at this everyday for hours.

Also is there something, say maybe a driver, that was installed i do not need that is blocking me from installing the correct drivers? What driver in my boot camp folder do i need to install to get to the correct display to run those games.

Similar Messages

  • Could not install Visual Studio 2013 in Windows 7 via Boot Camp

    Hi there,
    For a intro to programming class, I was required to install Visual Studio Express for Windows Desktop on my machine. Because I use a MacBook Pro Retina 13 , I had to install a copy of Windows via Boot Camp. I decided to install a copy of Windows 7 as I had
    a license with me on hand.
    Unfortunately, I had trouble installing Visual Studio as it gives me a fatal error for Microsoft .NET Framework 4.5.1 during installation
    Here is a copy of the log file that I obtained from the attempted installation:
    [0FE4:0970][2015-01-22T23:25:57]i001: Burn v3.7.3424.0, Windows v6.1 (Build 7601: Service Pack 1), path: C:\Users\Yeen125\Downloads\wdexpress_full.exe, cmdline: ''
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'ExtraEditionDisplayName' to value '#loc.slipstream'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'EditionDisplayName' to value 'Express 2013 for Windows Desktop'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'MoreLanguageFwlinkId' to value '427815'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'PrivacyAgreementFwlinkId' to value '427803'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'PrivacyStatementFwlinkId' to value '427803'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'MinOsLevelFwlinkId' to value '427813'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'SolutionFwlinkId' to value '427804'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'HelpFwlinkId' to value '427805'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'IE10FwlinkId' to value '427807'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'WinBlueFwlinkId' to value '427810'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'SHA256BlockFwlinkId' to value '427811'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing numeric variable 'Win81PreRelBlockFwlinkId' to value '427809'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'NetfxProductVersion' to value '4.5.31101'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'ProfessionalVSVersion' to value '11.0.50727'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'BaselineBundleVersion' to value '12.0.21005'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'FirstSlipstreamBundleVersion' to value '12.0.21006'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'ProductKey' to value '4JD6KB7RFPK8GFJC7MC8J7B4P'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'WinSDK_Desktop_KitsRootPath' to value '[ProgramFilesFolder]Windows Kits\8.0\'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'WinBlue_Common_KitsRootPath' to value '[ProgramFilesFolder]Windows Kits\8.1\'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'WinBlue_Desktop_KitsRootPath' to value '[ProgramFilesFolder]Windows Kits\8.1\'
    [0FE4:0970][2015-01-22T23:25:57]i000: Initializing string variable 'VS_Install_Path_VC' to value '[CustomInstallPath]'
    [0FE4:0970][2015-01-22T23:25:58]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\Yeen125\AppData\Local\Temp\dd_wdexpress_full_20150122232558.log'
    [0FE4:0970][2015-01-22T23:25:58]i000: Setting string variable 'WixBundleOriginalSource' to value 'C:\Users\Yeen125\Downloads\wdexpress_full.exe'
    [0FE4:0970][2015-01-22T23:25:58]i000: Setting string variable 'WixBundleOriginalSourceFolder' to value 'C:\Users\Yeen125\Downloads\'
    [0FE4:0970][2015-01-22T23:25:58]i000: Setting string variable 'WixBundleName' to value 'Microsoft Visual Studio Express 2013 for Windows Desktop - ENU with Update 4'
    [0FE4:0970][2015-01-22T23:25:58]i000: Loading managed bootstrapper application.
    [0FE4:0970][2015-01-22T23:25:59]i000: Creating BA thread to run asynchronously.
    [0FE4:1248][2015-01-22T23:25:59]i000: Ux Started
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Loading LocalizableStrings.xml string from LocalizableStrings.xml
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Reset Result
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Current action: Install
    [0FE4:1248][2015-01-22T23:25:59]i000: Setting string variable 'CurrentOperation' to value 'Install'
    [0FE4:1248][2015-01-22T23:25:59]i000: Setting string variable 'IsLanguagePack' to value ''
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Current action: Install
    [0FE4:1248][2015-01-22T23:25:59]i000: Setting string variable 'CurrentOperation' to value 'Install'
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: New last unconfirmed source: Web
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Source confirmed
    [0FE4:1248][2015-01-22T23:25:59]i000: Setting string variable 'CurrentRepairPackage' to value ''
    [0FE4:1248][2015-01-22T23:25:59]i000: Setting numeric variable 'HypervisorSupported' to value 0
    [0FE4:1248][2015-01-22T23:25:59]i000: Setting numeric variable 'HypervisorEnabled' to value 0
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Resume = None
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Restart = Prompt
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Relation = None
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Action = Install
    [0FE4:1248][2015-01-22T23:25:59]i000: MUX: Display = Full
    Could you help me install Visual Studio 2013? I need it before my first assignment is due. Thanks!

    Your install log is peppered with this error: "MsiViewExecute failed", which indicates a problem with your Windows Installer.
    For suggestions on repairing WI in Windows 7, read here:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/need-to-reinstall-windows-installer-in-windows-7/4cb8e54c-5a4e-439d-9d46-1dcd387d2604

  • Partition my drive for windows 7 via boot camp

    IMac 20-inch, Mid 2007
    2 GHz intel core 2 duo
    I am trying tp use boot camp to partition my hard drive to install windows 7.  This is the error I receive.
    "The disk cannot be partitioned because some files cannot be moved.
    Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    My hard drive is already formated as a Mac OS Extended (Journaled) volume, but it does not say as a "single" Mac OS Extended (Journaled) volume. Can anyone tell me what I can do to resolve this issue.

    Why is it so hard?
    1000 and 1 times: the drive must have FREE contiguous unfragmented space and some files are blocking and preventing.
    Some are able to find and delete, some by booting from another hard drive or OS X DVD to repair and/or run iDefrag.
    Or.... backup; erase; and restore.
    ie, CLONE your hard drive in both directions. My choice would be SuperDuper or Carbon Copy Cloner. They tend to work. Defrag tends to be slow and if there is no backup and there is an error.... well, you'll find out.
    Apple error message is badly and poorly worded. Said so for over 3 yrs and it has not changed or improved though.
    Paragon CampTune 9.5 $19 is great for Boot Camp. And resizing. And Windows 7 may need 2 or 3x what the base minimums listed. 32-48GB at least to be safe. And those are conservative numbers.

  • Need Help installing Portal 9.2 on Windows VISTA Home Premium(OS) ?

    i just need to know whether Portal workshop 9.2 works on the
    Vista operating system. if it does, could u reply me by saying what kind of changes is to be done in order to work.
    I tried creating a sample EAR n WebProject, and tried to start the server , but it doesn't start. And if it starts, then it throws me an error saying cannot deploy Ear.
    It takes for ever to start the server too.

    Hi
    it does work (for the fairly simple application i made).
    Though when starting up the server i normally have to right click the .cmd and say run as administrator.
    The anti virus/firewall also keep popping up warning messages and you have to allow all of them.
    regards
    deepak

  • I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    All,
    A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
    Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
    The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
    Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
    So happy to be done w/this one!
    Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
    TC

  • I install windows 8 via boot camp but its corrept so i recover this by the bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automaticly now its become a pc how can i install my mac osx again?

    i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me

    If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
    Install Mavericks, Lion/Mountain Lion Using Internet Recovery
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    If you have an earlier model:
    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Error 0x80070017 when installing Windows 7 via Boot Camp...

    I've been trying hard to research this issue and haven't come across anything that has worked for me.
    At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
    So Boot Camp begins...
    Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
    Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
    It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
    It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
    "Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
    I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
    Important Notes:
    I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
    This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
    The Superdrive appears to be working just fine.
    I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
    Thanks in advance!

    Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
    As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
    I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
    The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
    An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
    Mac_Win, thanks for the suggestions!

  • I can't find ios partition after installation of Windows 7 via boot camp. can someone help please?

    I installed Windows 7 via boot camp and now I can't find my Mac partition. My commuter boots up to a blank gray screen and after several minutes the Windows partition starts. I don't know what to do. Can someone help me?

    In Windows, go to Control Panel -> System. Do you see a Boot Camp option? If you do not, please download BC drivers as appropriate for you specific Mac year/model System requirements to install Windows on your Mac via Boot Camp - Apple Support
    and Boot Camp: Install or repair Boot Camp drivers.
    The other option is to use
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    How to Reset NVRAM on your Mac - Apple Support

  • Time Machine stuck at "Looking for backup disk" after installing Windows 8 via Boot Camp

    I've been backing up via Time Machine to an external USB drive and it's been working fine. I recenty installed Windows 8 via Boot Camp and now TM gets stuck forever at "Looking for backup disk...".
    I've tried the following, to no avail:
    Using "Select Disk" in TM preferences to re-select the disk
    Deleting /Library/Preferences/com.apple.TimeMachine.plist
    Running system maintenance via Onyx
    Resetting PRAM
    Formatting the drive and setting it up for TM backups again
    The Boot Camp partition is on the same drive as OS X (on a 180GB Intel 330 series SSD). During the Windows installation I re-formatted the partition as NTFS.
    If I start OS X in Safe Boot mode, TM backups work. In Safe Boot mode, the NTFS partition isn't loaded so I suspect it has something to do with this. Any ideas would be greatly appreciated.

    I installed Paragon NTFS for Mac and it started working all of a sudden.

  • How do install the network adaptor for windows 7 with boot camp?

    How do I install the network adaptor for windows 7 with boot camp?

    boot camp forum: https://discussions.apple.com/community/windows_software/boot_camp 

  • After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key.  However, disk still in reader, and not using a Mac keyboard

    After attempt to install windows 7 via boot camp onto Mac mini, my screen reads "no bootable devise--insert boot devise and press any key.  However, disk still in reader, and not using a Mac keyboard

    Reboot your Mac, as soon as you hear the chime press the option/alt key and hold it until the boot manager appears, select OSX to boot from.

  • How do I toggle num lock in Windows 7 via Boot Camp 4.0 on a MacBook Pro (Late 2011)?

    Is there a keyboard shortcut to enable num lock on the MacBook Pro 2011 (Late) in Windows 7 via Boot Camp 4.0?  I have a mouse with a numpad mapping on the side of it.  When I press the number keys, the cursor responds in the way one would expect it to with the num lock off (ie, 6 moves it right, 4 moves it left, etc); however, I need to use it to produce numbers. 
    I have read http://support.apple.com/kb/HT1220, which covers the previous MBP keyboard (on which the F6 key function was numlock), but I can't find any information regarding the possibility of doing this with the new MBP model keyboard (on which the F6 key function is increasing the keyboard backlight).  Any thoughts?  Suggestions?

    I was looking for this answer and found it on another site. I realize this is an old thread, but just in case someone else stumbles here and needs to do it, here's how to turn numlock on or off in Windows, and to make it stick:
    Run Registry Editor (RegEdit)
    In Windows 8 or earlier you can press Command-R, then type regedit
    In Win7 or earlier, you can also just click Start menu, and type regedit in the search field.
    In the Registry Editor, navigate to HKEY_CURRENT_USER -> Control Panel -> Keyboard
    Within the Keyboard folder, you should have an entry named InitialKeyboardIndicators. Set the "Data" value accordingly:
    0 = Num Lock is turned OFF after login
    1 = Disable Num Lock
    2 = Numlock is turned ON after the login
    I hope this helps.

  • I need help installing Realtek ALC880 driver on HP Pavillion a1104x

    As the title says, I need help installing the Realtek ALC880 audio driver on my HP Pavillion a1104x
    I installed a fresh copy of Windows XP Home SP2 and I can't figure out what I'm doing wrong.
    I download the Microsoft UAA Driver
    Then I install the Realtek Driver
    When the Microsoft UAA driver installs, it tells me that I have an audio device
    When I install the Realtek driver, it dissappears and the realtek driver shows up in my device manager but the Realtek sound manager doesn't show up nor does any audio device show up in the windows sound manager.
    Please help

    Try clearing the CMOS.  No sound device in Device Manager generally means that Windows in not detecting the device when it boots up.
    Try a device manager hardware rescan and see if Windows will redetect the sound device.
    Try these two Intel utilities and see if anything will need updates.  #1 might not find the appropriate hardware so be too concerned.
    Intel Driver Update Utility  Intel Driver Update Utility
    Intel Chip Set update  Intel chipset update utility
    A yellow question mark or yellow exclamation point in device manager would indicate a software driver or hardware issue. Go to www.realtek.com for the latest XP driver.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • How to make iSight work with windows vista on boot camp

    I just installed window vista on my mac, everything work perfect but the the cam, i got a MacBook pro and my boot camp is 2.0
    Please advise,
    thanks

    last update wrote:
    I just installed window vista on my mac, everything work perfect but the the cam, i got a MacBook pro and my boot camp is 2.0 ...
    forgot to mention, I only need my cam to use with MSN messenger nothing else,
    Thanks,
    I don't use Windows®, but the results of this search of the iSight Forum may help you:
      http://tinyurl.com/2wg96fg
    If you need more, try the results for this search of the Boot Camp Forum:
      http://tinyurl.com/3amftuj
    If you have not yet seen it, also take a look at http://www.apple.com/support/bootcamp/
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.3)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.3)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Time Capsule issue with backing up Windows partition via Boot Camp

    I just bought the macbook pro and time capsule. I set up a 25GB Windows partition using Boot Camp and I have set up a Time Capsule to handle the backups. Time Capsule seems to backup the OSX hard drive partition fine, with the historical versions of the drive displayed correctly. However, with the Windows partition the Time Capsule appears to be backing up any files that change, however there is no version control showing up in Time Machine. In other words, I ONLY see the Windows partitioned drive as backed up in the "Today (Now)" screen. Any historical dates the drive shows up shaded and I cannot access it. Is there a way for Time Machine to manage the Windows partition in the same way as it does for MAC OSX drives?
    John

    Why is it so hard?
    1000 and 1 times: the drive must have FREE contiguous unfragmented space and some files are blocking and preventing.
    Some are able to find and delete, some by booting from another hard drive or OS X DVD to repair and/or run iDefrag.
    Or.... backup; erase; and restore.
    ie, CLONE your hard drive in both directions. My choice would be SuperDuper or Carbon Copy Cloner. They tend to work. Defrag tends to be slow and if there is no backup and there is an error.... well, you'll find out.
    Apple error message is badly and poorly worded. Said so for over 3 yrs and it has not changed or improved though.
    Paragon CampTune 9.5 $19 is great for Boot Camp. And resizing. And Windows 7 may need 2 or 3x what the base minimums listed. 32-48GB at least to be safe. And those are conservative numbers.

Maybe you are looking for

  • Issue with CRM_STATUS_CHANGE_EXTERN - Not updating user status immediately

    Hi Everyone, I need to set a user header status in CRM based on the delivery block selected in ECC sales order. for example, If the delivery block is A2 then user status should be E0008(Image review) etc. For this to happen in the transaction CRMD_OR

  • BUSINES AREA-PAYMENT

    Experts:- If one company code making the payment for the two business area, at that time balance sheet, is tally or not (iterviewr says) is not tally, why what is the reason. this is my client (can u give ur ideas for this question

  • How to save the instance in standard lead from custom business object

    Hi Experts,           I am unable to save the instance(Record) in standard Lead business object from custom business object. Steps: created one custom business object with mandatory fields for creating instance in standard lead. in quick create scree

  • Specifying file name for ServletOutputStream ?

    Hello, How can I specify a file name for a ServletOutputStream ? The code below always defaults to file name "MinimalBinaryStream" ? Thanks for your help !!! James import javax.servlet.*; import javax.servlet.http.*; import java.io.*; public class Mi

  • Cant make over seas calls

    i am currently overseas in oman and was able to make calls all day on my phone.  i do have a global plan but all of a sudden i can make no calls but still have internet connectivity.  can anyone help?