Need help installing snow leopard on mac mini 10.5.8 intel based

I need help need help installing snow leopard on mac mini 10.5.8 intel based so if u kno how pls message me thanks
<Email Edited by Host>

You need to purchase the upgrade disk (it is a DVD). Then just put it in and run the installer. When it was first released it was $29 USD, do not know if the price has changed or not.
The usual precautions about backing up your data apply. In fact I would recommend either making a Disk Image of your current boot drive or using something like Carbon Copy Cloner to copy it to an external drive. I upgraded 5 machines from Leopard to Snow Leopard without any issues, but better to be safe than sorry.

Similar Messages

  • Need help installing Snow Leopard.

    Need help installing Snow Leopard on a 2009 iMac. Hard drive is only choice for location and message says hard drive can't be used because it is used for Time Machine backups. Ultimate goal is to upgrade to OS 10.6.8.

    Check to see if you have a file called backup.backupdb
    If you do that means at some time in the past Time Machine was configure to backup to that drive
    If that is not where you want your backup to to go, and it should not be stored there any way, then delete it and the install should work then.
    Allan

  • Can I install Snow Leopard on Mac Mini Server hardware?

    What I would like to do is buy the Mac Mini Server but I don't need the server OS. I want the desktop OS on the Mac Mini Server. Will installing Snow Leopard on the server hardware be just like installing it on a regular Mac Mini?
    Or should I just wait and see how Lion shakes out?

    Thanks Indy, I already had proceeded the installation according your tip. Just an objection related to the updates: I was able to install the OS updates only while in target mode, as when I made 2 attempts to update the version 10.6.6 to the current one (10.6.7 - the combo one and the MBP version too) it was not permitted. I had to plug the FW cable into the MBP again and update the Mini's OS (using the special MBP version of 10.6.7) in target disc mode. I want to use the Mini as a media server and intend to install Windows 7 on the other HD which now hosts the server OS. However, according to one poster (Sven G) there are some problems (I don't know exactly what they are) related to Boot Camp software. Have you any information about these problems?
    I have maintained both OS (standard and server) living side by side on the Mini, is there any problem with that?
    Again many thanks, you were succinct, right to the point, and your tip just proved itself correct. 
    Cheers
    Marola

  • Installing Snow Leopard on Mac Mini Server

    I recently purchased a 1Tb 4Gb Mac Mini Server, running Snow Leopard Server. I want to use it as a central repository for my other macs: storing music, movies, backup, screen sharing (it's hooked up to my 32-inch TV) but I also want to be able to run Logic Pro, Ableton Live, etc. I also have a Macbook Pro running Snow Leopard Client, which contains all of my programs, plugins, data, etc. I realize that Snow Leopard Server does not have migration assistant, so I have tried to install a retail copy of Snow Leopard onto the secondary drive, but when it gets to the restart stage it crashes every time. I think this is a firmware issue, because the Mac Mini has a different hardware configuration to other macs. I do not have access to the mid-2010 Snow Leopard Client for Mac Mini which would allow me to install Client and use migration assistant from there. What I would like to know is:
    1/ Can I manually migrate my plugins/settings/programs to the server? If so, how? What is most crucial (and what I don't understand) is copying my audio units and audio programs (e.g. Logic Pro, Pro Tools). Because of the firmware issue, it seems more difficult than cloning my MacBook Pro to a time machine HDD and running from there... I would really like to purely clone my MacBook Pro, because I am very happy with the way it is set up.
    2/ Should I just wait for OSX Lion (July/August) which seems to be a combined server/client os, install that on both machines and run migration assistant from there?
    3/ Is there another method I can use? Something I am overlooking?
    Thanks in Advance.

    Thanks for your reply. I talked to the Apple Support again and they told me the server edition could only be used on that OS and if I wanted to use it as something else I could chose not to use the server applications, or buy a regular Mac mini. And that was all they said. Interesting since it was one of their sales persons who told me I could install Snow Leopard.
    Anyway, I got hold of a client disc and it all worked like a charm.

  • Can't install Snow Leopard on Mac Mini with 10.5.8.

    I'm trying to install an upgrade copy of Snow Leopard from Apple on my Mac Mini running 10.5.8. I bought this system used and the volume says ";" and the error log code is 21. Seems it can't find valid softward ID to continue or the path is different. Not sure where to go with this.

    If your mini meets the specifications for Snow Leopard (an intel processor and 1GB or more of memory)
    then go here to buy snow leopard
    http://store.apple.com/us/product/MC573Z/A
    It's possible that the upgrade disk you have is specific to particular Mac models.

  • Need help installing Snow Leopard without DVD drive

    Hi all,
    I posted this question under MacBook Pro but didn't get much help.
    I have a MacBook Pro running 10.4.11.  I bought the 10.6.3 Snow Leopard Install DVD from Apple but my DVD reader just keeps ejecting it, optical drive must have died.
    My roomate has a Windows 7 laptop, and I see here that I can put my DVD into his DVD player, and remote it over our wireless and install it to my laptop.
    I've run through the instructions but I can't see Remote Disc under the Mac's finder.
    I found another article with similar instructions that included some console code.  I've made sure to run the following commands in my Mac console too but no luck:
    defaults write com.apple.NetworkBrowser EnableODiskBrowsing -bool true
    defaults write com.apple.NetworkBrowser ODSSupported -bool true
    Is it possible to even do a remote install via one Windows 7 Laptop and my MacBook Pro with no optical drive?  Do I have some other kind of options to get this upgrade working? 
    Any and all help will be appreciated!

    That's actally a pretty good and cost effective way to do it.  I see some from Walmart for like $30, and it's possible to refund them if it doesn't work. 
    Thank you

  • Need Help Installing Snow Leopard onto a blank HD via Target Disk Mode

    Hey everyone.
    Recently I had the HD on my Black Macbook crash due to a mechanical failure. I have just purchased a new Hard Drive for my Macbook. It is completely blank other than the fact that I connected it to my girlfriend's White Macbook earlier today to create 2 partitions. I have a new copy of Snow Leopard that I want to install on it and was hoping someone could guide me through the process.
    What I have with me as of now is:
    One Black Macbook (UK bought) w/ Partitioned Blank HD and a non-functional Superdrive
    One White Macbook (US bought) running Tiger w/ working Superdrive that mounts the SL DVD
    FireWire Cable
    New Snow Leopard DVD
    My first attempt at this failed. I connected the two Macs with the FW cable and started up the Black Macbook in Target Disk mode. Both my HD partitions showed up on the White Macbook. I inserted the SL DVD into the White Macbook and when it mounted I clicked on install. Of course, now it thinks that I want to install SL on the White Macbook whereas I want to install it on the Black Macbook.
    I'm a college student without a working computer and with my finals coming up, I'm in deep trouble. I want to mention that my Black Macbook's Superdrive spits out _everything except for Movie DVDs and My Leopard Startup Disk._ It spins the SL DVD for a few seconds and spits it out as well. I'm wondering whether this might be an issue with the DVD region code on the SL DVD though I don't think that's it. My region code is currently set to Region 1 (US) where I purchased the Snow Leopard DVD off Amazon. I initially thought there was a problem with the DVD and CD lens in the drive and I bought a DVD/CD Lens Cleaner CD but I can't run it because the Superdrive spits that out too. I'm out of warranty on the Black Macbook so fixing the Superdrive is pretty much out of the question. I was under the impression that I would be able to install SL via Target Disk Mode without any hassles but boy was I ever so wrong.
    Is there any way that I can do this? I'm hoping someone here can help me out. Please do if you find the time to.

    By other computer, do you mean the White Macbook? So I should basically put the SL DVD in the White Macbook, restart with the C key held down? Is that right?
    Please pardon me if I'm being stupid.

  • Need Help Installing Snow Leopard over Mountain Lion!!!!

    Hey!!! I REALLY NEED SOME HELP!!! I had Mountain Lion installed on my Macbook Pro. I didnt like it and I wanted to downgrade to Snow leopard. I have the Install Disk with me. I went ahead and formatted my Macbook Pro. Now Im not sure what to do. Should I put the disk in?? And will it install?? And how should i install it??? All I can do as of now is boot into the Recovery HD.

    Hi.
    I have the same problem with an iMac - everybody gives the same response and none of the them work. Why? Possibly because the iMacs come with bluetooth keyboards and by the time the bluetooth connection has been made, it's too far into the boot sequence for "holding down the C" or "holding Option whilst pressing R", etc. to have any effect.
    (Oh yeah, I've tried connecting USB keyboards and they don't work either. - possibly because they are usually Windows and I don't know which keys map to which).
    It's bad enough being told to press the "Option" key on an OSX keyboard when there isn't one - at least not on English keyboards. If the Yanks mean the "Alt" key, then they should say so.
    I do not get the Installer Utilities options to enable me to clear the old operating system from my hard drive, because I can't find the key combination to force a boot from my DVD drive.
    I also get a message that I can't run "the (Snow Leopard?) Installer" on the current software (Mountain Lion) in order to start the regression to Snow Leopard.
    So, how do I trash my current system and start again? I suppose that I could always install Windows and then OSX over the top of it. Or take the disk out and start from scratch - but I've done that once and it's a bit boring.
    P.S. I was the "Backup Man" at a computer installation, so " Make sure you save this...." goes without saying.
    Any different ideas guys?

  • Install snow leopard on mac mini with broken DVD Drive

    I want to upgrade the OS on my mac mini but the hard drive keeps kicking out the disk - I read that I "might" be able to fix this by using a DVD cleaner but I am not overly optimistic about this fix. I have an external USB drive and a Windows PC to work with so I am wondering if I can use the DVD drive of the PC to copy the install disks to the external drive and then perform the instal from the external drive. I have been reading posts and can find advice on how to copy the Leopard install discs using another Mac or by using the remote disk feature - but since I don't have another Mac, these are not currently options.
    Thanks

    1. Clean your drive and reset the > PRAM, then try upgrading with the Mac Mini's drive.
    2. Try out that external USB DVD drive, some will work if they are not OS X compatible.
    3. Your PC might work, see > DVD or CD sharing: Using Remote Disc

  • How to get Snow Leopard for Mac 10.5.8 not Intel Based

    how to get snow leopard to not intel based Mac 10.5.8

    Is it a Mac Pro, or a Powermac?
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware and report this upto *but not including the Serial#*...
    Hardware Overview:
    Machine Name: Power Mac G5 Quad
    Machine Model: PowerMac11,2
    CPU Type: PowerPC G5 (1.1)
    Number Of CPUs: 4
    CPU Speed: 2.5 GHz
    L2 Cache (per CPU): 1 MB
    Memory: 10 GB
    Bus Speed: 1.25 GHz
    Boot ROM Version: 5.2.7f1

  • I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

    I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

    zoominnana wrote:
    Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
    No, you can't partition a Time Capsule's internal HD.  Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
    Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
    There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things.  See #10 in  Time Machine - Frequently Asked Questions for details.

  • How much storage do I need to install Snow Leopard onto my 2008 MacBook?

    I have a 2008 MacBook and need to install Snow Leopard to be able to connect with my ipad and iphone.
    But it keeps telling me there isn't enough storage space available. I have over 2Gb, isn't that enough?

    General requirements
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible Internet service provider; fees may apply
    From here  >  http://support.apple.com/kb/SP575

  • HT1444 need to install snow Leopard OS X 10.6 on my laptop

    need to install snow leopard os x 10.6 on my laptop

    You can purchase Snow Leopard from the Apple Store. It ships on a DVD.

  • Can I upgrade to Lion from OS X 10.5.8 (Leopard)?  Do I need to install Snow Leopard first?  If so, Which version?

    Can I upgrade to Lion from OS X 10.5.8 (Leopard)?  Do I need to install Snow Leopard first?  If so, Which version?

    There are only two versions of Snow Leopard, the ordinary one and the server edition.  Most people have no need of the server edition.  Any Snow Leopard retail disc, no matter how old, even 10.6.0, can be updated to 10.6.8, so the version is pretty much irrelevant.  You need to make sure your hardware is up to scratch for Lion though - you have to have an Intel processor, Core 2 Duo or better - NOT Core Duo.

  • Help: Install Snow Leopard Server 10.6.0 on Mid-2010 Mac Mini, then update?

    I just purchased a Mid-2010 Mac Mini with Snow Leopard Client 10.6.3 (the new ones just released) with the idea of installing my copy of Snow Leopard Client on it and using it as both a network server and media server.
    I own Snow Leopard Server 10.6.0 (the initial DVD release) and was thinking I could do a fresh install and update to 10.6.4 on the Mini without problem, but that didn't work. I also tried doing a Target Disk Install to the Mini using my MacbookPro, but the installer choked at the Machine Checksum saying MBPs weren't supported to run the installer.
    So, that blows both of my previously known installation options. I was wondering if anyone else with the new Mini and Snow Leopard Server had any suggestions on how to get my current version of Snow Leopard Server (10.6.0) installed on the Mini and then run system updates to get it to boot properly.
    Thanks

    Allan Eckert wrote:
    Hi GrainFocuser;
    Your copy of SL Server version is probably too old to install on the new Mac Mini. It probably doesn't have all of the correct drivers for the newer hardware.
    You might have better success with your alternatives if you post over on the server forum instead of here.
    Allan
    Message was edited by: Allan Eckert
    Allan, thanks.
    It is pretty clear that my installation disk is too old, hence looking for options and suggestions.
    In years past with previous versions of Server, there was a way to install an outdated install disk (a point release or 3 behind) and then run the necessary installation updates...either through target disk mode or on to a separate boot disc.
    So, with my 10.6.0 Server Install disc, I am not able to do so in either scenario because a) My other admin machine is a MB Pro and the installer performs a hardware checksome preventing install...so no Target Disk Mode, and B) Install on other disc from mini, again Hardware checksome since hardware not recognized.
    I am looking at options to enable an install with my disk short of having to physically walk into Apple (a huge trek) and get a new install disk or ask Apple Support to mail one.
    So, again... Any options from OS X Server Admins out there?

Maybe you are looking for

  • Transaction code for Depricitation Report

    Hi, we have asset accouting with WDV Method & maintaing our books as per F.Y. April to March But, due to foreign investor's investment, we have need to closed our books, twicely, i.e.  IFRS - F.Y.-Jan to Dec / ( US gap ) & Indian gap, FY. April to Ma

  • Can't open sequences or import clips - File format not supported

    We have an iMac workstation here running Premiere that will not open projects or import clips.  Here's the sequence of events that led to this: 1.  Premiere was locking up on the splash screen whenever it got to "ImporterQuicktime.bundle".  I tried t

  • Loaded .swf in wrong place

    hello, i have saved "TestClass2" and "one.swf" in the same folder, and made TestClass2 the class of a movieClip within "one.swf". On the last frame of the timeline of "one.swf", I have a boolean variable called endFrame, which the function onEnter is

  • Re: userexit in AR document creation

    Hi, Where can I find the User exit for ar entry, tcode FB70. I need to update a customized table when creating an entry (regardless CN or DN). Thanks

  • Do we have pre-built Audit reports?

    Hi, I think I saw pre-built Audit reports in m26.cab for BOXI R2 SP3 but I am not able to find it. I saw it everywhere but could not find this time. Can someone help? Thanks,