Need help! Ipod connection problem
At the begining everything was allright. But after I restored my Ipod the error has occured. When I connect the Ipod masage "do not disconnect" appears but only when Ipod is auto syncing. Only then I can change options on my Ipod (from Itunes. Exept music , I can change it offline) but with that problem I can't (for xample) put new photos (becouse there are no auto sync photos selected and I can't select it)WHEN i CHANGE SOME OPTIONS (WITH CONNECTED Ipod but without the masage "Dont disconnect") and press aply The Itunes crashes (sometimes drops masages about error -50, not usable disk or unknown file location )
The iPad Bluetooth does not network with iPhones or iPods. It is intended for headsets, keyboards and car systems, computers for tethering purposes.
Similar Messages
-
Need help for connection problem
When I try to run JdbcCheckup.java, I get following problem:
password: tiger
database(a TNSNAME entry): myhost:1521:orcl
Connecting to the database...Connecting...
Exception in thread "main" java.sql.SQLException: Io exception: The Network Adap
ter could not establish the connection
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:156)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java:212)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va:251)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:224)
at java.sql.DriverManager.getConnection(Compiled Code)
at java.sql.DriverManager.getConnection(DriverManager.java:137)
at JdbcCheckup.main(Compiled Code)
I'm very appreciated for everybody's help
nullThis example can be run without specifying a TNSNAME connection string, as the oci8 jdbc driver will default to the localhost. OR - Specifying the only the TNSNAME is required, i.e. edit %ORACLE_HOME%\network\ADMIN\TNSNAMES.ORA file and locate the XXXXX.WORLD entry in the file. This is the TNSNAME entry referred to.
Try re-running this as follows (with no TNSNAME entry at all):
%ORACLE_HOME%\jdbc\demo\samples\oci8\basic-samples> java JdbcCheckup
Please enter information to test connection to the database
user: system
password: manager
database (a TNSNAME entry):
Connecting to the database...Connecting...
connected.
Hello World
Your JDBC installation is correct.
null -
HT1212 Need help ipod has been disabled won't let me conect to itunes
Need help ipod has been disabled what do i do?
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
-
Hi,
I need to generate a clock with a period of 20 micro seconds, duty cycle of
approx 20% and a data line as well as an address line all linked to the clock
pulse.
I have tried many different solutions, all using the Daq PCI-1200 but nothing
seems to work correctly. Usually the system bombs and I have to do a manual
reset to over come the problem.
Any suggestions?
KenHallo, Ken,
Du meintest am 20.02.00 zum Thema Need help with daq problem:
> I need to generate a clock with a period of 20 micro seconds, duty
> cycle of approx 20% and a data line as well as an address line all
> linked to the clock pulse.
You'll need an external clock, expecially under Windows.
Windows ticks with appr. 18 Hz, and the CPU tick isn't always available
when Windows tasks multi.
Viele Gruesse!
Helmut -
When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.
Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.
-
TS1398 I need help getting connected to our home wifi.
I need help getting connected to our home wifi. I've reset network settings, iPhone, and router but the error "unable to join network" keeps coming up. I also double checked the password. Please help
Other possibilities:
Your router firmware is out of date. Check the manufacturer's website for an update
You have MAC (Media Access Control) filtering enabled on the router, that restricts access to "known" devices and the new iPhone is not on the table of known devices
Your router has a setting limiting the number of simultaneous allowed devices
Your routers SSID ("name") is still the default (e.g., LINKSYS, DLINK, NETGEAR, etc). Your phone has encountered other routers with the same name as you have traveled, and the phone is confused as to which router is the real one. If your router's name is still the default you should change it. -
Need help to connect to aws instance from my macbook pro
i need help to connect to an aws instance from my laptop. Please help me..
No, it's not Apple's doing.
You are infected with Downlite, which is preventing you from accessing the AdwareMedic site. For an explanation and some solutions, see:
http://www.thesafemac.com/adware-blocking-adwaremedic-downloads/
If the adware prevents you from loading that page as well, try this one:
https://discussions.apple.com/docs/DOC-7792
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
Need help with getResource() problem under weblogic 6.1
Hey all,
I've got a serious problem that I can't figure out. This should be really
simple - but it's alluding me. I have an ear file with a number of servlets
inside it. This ear file also contains a resource that my servlets want to
read from. This resource is located (within the ear file) at:
"/content/structure/a.txt". The file contains raw ascii.
To have my serlvet read from this file, I thought it would be as simple as:
URL content =
servlet.getServletContext().getResource("/content/structure/a.txt");
// pw is an instance of PrintWriter
pw.print(content.getContent());
However, when I execute the above I get the following exception:
java.lang.NullPointerException
at
java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
at java.net.URLConnection.getContentHandler(URLConnection.java:979)
at java.net.URLConnection.getContent(URLConnection.java:581)
OK, so fine - I figure that I'm new to this. The documentation for the URL
class tells me there is another way around this. It says that rather then
calling getContent() directly, I can open a stream on the URL and read from
that, like so:
URL content =
servlet.getServletContext().getResource("/content/structure/scenario2resourc
es.txt");
FileInputStream fis = content.openStream();
but when I do this I get the following different exception:
java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
at Utility.writeFileToOutput(Utility.java:134)^M
Apparently this thing is trying to return a web-logic-specific stream (which
is incompatible with an FileInputStream) - which I don't want to use or
learn about since I want my stuff to work under other webservers.
Can anyone tell me what I'm doing wrong? This should be simple.
-john
John Hilgedick
WisdomTools, Inc.
[email protected]
Wenjin,
I appreciate your response. I tried treating it as a normal InputStream -
but it didn't make any difference. Here's what I did:
URL content =
servlet.getServletContext().getResource("/content/structure/scenario2resourc
es.txt");
InputStream is = (InputStream)content.getContent();
And here's the exception:
java.lang.NullPointerException^M
at
java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
at
java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
at java.net.URLConnection.getContent(URLConnection.java:554)^M
at java.net.URL.getContent(URL.java:807)^M
at Utility.writeFileToOutput(Utility.java:134)^M
You can see that it is definitely breaking somewhere in getContent().
If you have any other ideas, I'd appreciate hearing about them.
-john
----- Original Message -----
From: "Wenjin Zhang" <[email protected]>
Newsgroups: weblogic.developer.interest.servlet
Sent: Wednesday, November 20, 2002 5:03 PM
Subject: Re: Need help with getResource() problem under weblogic 6.1
>
> The "/" in getServletContext().getResource("/content/structure/a.txt")
means the
> web (WAR) application root, not your EAR root.
>
> The ClassCastException is because that content.openStream() is not
FileInputStream
> and has nothing to do with Weblogic. You should treat it as normal
InputStream.
>
>
> "John Hilgedick" <[email protected]> wrote:
> >Hey all,
> >
> >I've got a serious problem that I can't figure out. This should be
really
> >simple - but it's alluding me. I have an ear file with a number of
servlets
> >inside it. This ear file also contains a resource that my servlets want
> >to
> >read from. This resource is located (within the ear file) at:
> >"/content/structure/a.txt". The file contains raw ascii.
> >
> >To have my serlvet read from this file, I thought it would be as simple
> >as:
> >
> >URL content =
> >servlet.getServletContext().getResource("/content/structure/a.txt");
> >// pw is an instance of PrintWriter
> >pw.print(content.getContent());
> >
> >However, when I execute the above I get the following exception:
> >
> >java.lang.NullPointerException
> > at
> >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
> > at
java.net.URLConnection.getContentHandler(URLConnection.java:979)
> > at java.net.URLConnection.getContent(URLConnection.java:581)
> >
> >OK, so fine - I figure that I'm new to this. The documentation for the
> >URL
> >class tells me there is another way around this. It says that rather
> >then
> >calling getContent() directly, I can open a stream on the URL and read
> >from
> >that, like so:
> >
> >URL content =
>
>servlet.getServletContext().getResource("/content/structure/scenario2resour
c
> >es.txt");
> >FileInputStream fis = content.openStream();
> >
> >but when I do this I get the following different exception:
> >
> >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
> > at Utility.writeFileToOutput(Utility.java:134)^M
> >
> >Apparently this thing is trying to return a web-logic-specific stream
> >(which
> >is incompatible with an FileInputStream) - which I don't want to use
> >or
> >learn about since I want my stuff to work under other webservers.
> >
> >Can anyone tell me what I'm doing wrong? This should be simple.
> >
> >-john
> >
> >
> >--
> >John Hilgedick
> >WisdomTools, Inc.
> >[email protected]
> >
> >
>
-
IPOD CONNECTIVITY PROBLEM WITH WINDOWS XP VIA USB 2.0
Enough is enough.
I have an ipod touch and I am having difficulty connecting it to my pc via usb 2.0.
I have searched the entire web and came across many cases similar or the same as mine. It's time for apple to face the fact that there is something wrong with either the apple mobile service or the apple usb drivers or the itunes software that causes connectivity problems with win xp.
For the record my case is this:
I got my itouch 3 days ago. I installed itunes 8.0. Then I plugged in my ipod to a usb extension cable port connected to a usb at the back of my desktop computer. At first I got the "this usb device can perform faster if you plug it to a usb 2.0 port etc." message. So I did. I removed the extension cable and connected it directly to one of the usb ports at the back. The first time it synchronized, it seemed fine. So I decided before I do anything with it, to update it to the 2.1 version. I made my account and bought (very bad policy there apple, it should be free or at least cheeper than 8 euro) the 2.1 update. I clicked to update the i-touch. While it was updating it crashed during the restore process (because it was disconnected but I didn't know that at the time). I unplugged it, resetted and plugged it back and managed to continue the restoring process until it was updated. After figuring out itunes I chose the "manage files manually option", kept everything unchecked in the sync options except the applications. I noticed there were random disconnections here and there but I didn't pay much attention because they weren't very frequent.
The next day I plug in the touch again and suddenly I hear that annoying "connecting-disconnecting" sound from windows while my touch kept disappearing and reappearing in itunes. Suddenly my playlists disappeared from the touch. Nothing was in the touch any more. How could that happen since i had chosen to manage my files manually instead of synchronizing? So I unplugged the touch again, restarted the touch, restarted the pc, stopped and restarted the apple mobile service, unistalled and reinstalled itunes, searched microsoft support and read many usb troubleshooting documents in the web. Nothing happened. The touch randomly keeps disconnecting from the usb. I eventually managed to put my stuff back in and keep them there.
Here's what I know:
1) There is nothing wrong with my usb ports. I don't use usb hubs, they are usb 2.0, the voltage (500mA) is correct in the device manager. Everything else works fine there.
2) The ipod touch does not support disk mode so you can't see it under "my computer" and this is not a problem.
3)There is nothing wrong with the ipod, it works perfectly.
4) This is not a usb cable physical problem.
5) The five R's are irrelevant with this situation.
Uninstalling and reinstalling itunes doesn't solve the problem, neither does hard resetting the ipod.
6) Older PC configurations seem to be more affected by this but it doesn't have to do with unsupported specific chipsets.
Here's what needs investigating:
1) There may be a problem with the apple mobile service running on win XP.
2) There may be a problem with the apple usb driver and win XP or older motherboards.
3) There may be a 2.1 firmware issue with usb 2.0 connectivity.
Workaround so you don't go nuts:
Use USB 1.1 instead of 2.0. It is A LOT slower but it keeps the connection stable and you can work with the ipod. Just start copying and go do something else for the next hour. So far it works for me.
This is a serious issue that needs immediate attention. I've stumbled across forum discussions dating to 2005 with this problem (with older ipods of course).I think this needs to be put down to the eternal PC/Mac argument. Apple dont want to fix this as they want everyone to buy a Mac. Its a business, understandable, but in turning away PC buyers they alienate a huge percentage of the market.
Now, I had my first iTouch stolen. It synced, for the most part, very well, just occasionally it removed settings and music, but ticking boxes each time I sync'd sorted that, Its a workflow procedure.
SO, now that my Touch has been replaced, iTunes cannot see it. The PC can identify it on USB1 or USB2, My work lap top can see it and has indeed upgraded it to V2 software, just in case that was the issue, but no. For some really weird reason Itunes on my desktop cannot see the new pod.
This does not make sense with the argument that Apple software doesnt work on a PC, but doesnt help that none of the Apple support staff, phone or in-store have a clue about Windows operations.
Because my Touch has now been trying to connect to 6 separate installs of itunes, multiple USB ports, multiple USB cables, a complete overhaul of the registry settings (everything else still works), and the loss of all my previous settings and backups from the last Touch... but still, the PC says its an ipod but cant install it, iTunes sits there, dumb.
The only thing I can do now is sell the device as brand new as it has never had music on it and is just a week old...
It has changed the MiniMac I was going to have for my new flat screen TV into a PC and suggests that anyone with a PC should stick to devices that run on PC, of which there are many, just without the user interface of the dear departed IPod Touch.
Thanks -
Ipod connection problem, not seen by comp. HELLLLLPPPP
After choosing to restore my ipod the message 'itunes needs to prepare your ipod for recovery. Please leave your ipod connected'. I click continue. It prepares ipod for recovery, before saying 'waiting for ipod' even though its connected, it then repeats the same message, 'itunes needs to prepare your ipod for recovery. Please leave your ipod connected'. And the cycle repeats. I've tried this in all 4 USB ports of my laptop, which dont have problems with any other device and none of them work. This problem has happened before and fixed itself after 3-4 weeks out of the blue. I dont want to have to wait for this long again before updating my ipod.
Anything that can help would be great, its so frustrating!!!!http://docs.info.apple.com/article.html?artnum=305136
Pay attention to the last part of this article and replace the USB Driver for your computer (with the iPod not connected).
In Device Manager, right click on your iPod, select Disk Management, and format it (FAT32, not a quick format) and while you are there give it a higher drive assignement such as M, or P or Z.
If iTunes now sees it, Restore your iPod and then fully charge it.
You can only use Firewire for charging. -
Just joined the Forum after reading some of the posts here - you guys seem to know alot more about this than me so any help is greatly appreciated.
My 30Gb 5th Gen iPod has software version 1.2.3. iTunes tells me there is a version 1.3 available but when I try to update it I get an unknown error message (1417).
I've been through the support pages and have done the 5 R's as recommended but my iPod won't restore - not even to the early version. I get an unknown error message (1418) when I try to restore.
On trying to just synch the iPod without updating the software iTunes tells me that my PC is not authorised to play over 100 tracks and it has now removed them from my iPod even after I have signed in to authorise my computer over 30 times when the messages appear!!
This is the only computer I have used to update my iTunes and iPod for over 2 years now and it is running fine. I've had no problems until now and usually update every 2 - 3 months.
I need help to get my iPod updated to the latest software and to get my iPod / iTunes to recognise that my computer is authorised to play the music.
Help please - I've been trying to get this thing to work for hours!!
Cheers, AlThanks Jeff but I've been through these steps on two or three occasions before I joined the forum and they haven't done any good.
The other reply tells me to re-format the iPod.
Is this a good idea or would I just be left with a (semi) useless portable drive?
If I were to consider this would I do it through "My Computer" and format the drive or explore the drive and just delete all the content?
I don't want to do anything that'll be un-recoverable. Let's face it I am still able to use the iPod at the moment and although I've lost access to 100 songs I still have over 3000 songs to keep me going! All I really want to do is update the software and keep it updated.
Another thread suggested the removal of iTunes and iPod updater software from the PC and then re-installation. Any views on that solution? -
My iPad mini has problem staying connect to my wifi after I connect. It seems like after a long period of non usage I have to connect o my wifi again where as my iPhone stays connected
Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
A Paticularly Bad iPod Connection Problem
My ipod will not connect to my PC it shows up in windows explorer but when you click on it or rightclick it freezes the "explorer.exe" and i have to end its task..the ipod updater is the same way it freezes as soon as i plug in my ipod..or open it with the ipod connected.
Once I plug in my Ipod there is no way short of restarting it while its plugged in i can do to get it free'd up I've been having alot of problems with this lately normally I would be able to restore it and start fresh but nothing I do seems to have any effect this time,
its been on a declining slope since it broke originally see this thread for my previous question:
http://discussions.apple.com/thread.jspa?threadID=535772&tstart=0
I'm guessing a major harddrive failure...wouldn't that just be the way of it now that i'm off Warrentee...I posted this in another topic, but I had the same problem that you have...this is how I resolved it:
Success!!!! Here's how I did it:
1) Re-named iTunes music folders in my My Music documents, just to avoid any mishaps during the uninstall process. I just called them "Backup" and "Backup2"
2) if you have the ORIGNAL iPod updater installed on your computer, restore iPod using this updater. If not skip this.
3) Uninstall iTunes, and any iPod updaters that you have, including the original. Delete any leftover files & folders from the C: drive.
4) If your iPod is in disk mode, and is available in Windows Explorer, find it and right-click, and select format. Make sure to have the volume type set as FAT32, and do not use quick format. This is really just an extra step, just to be sure that your iPod is clean of any newer software.
5) Re-boot, and re-install your ORIGINAL software.
I have a 3G 15GB iPod, and do not listen to podcasts. So not having that capability in iTunes is no loss to me. If you have more music in iTunes than will fit on your iPod, you can either manually update iPod, or create a playlist, and set iTunes to only update that playlist (or any others you create later). If you listen to podcasts, and need that functionality in iTunes, you may be out of luck, as oldversion.com does not currently have older versions of iTunes available. If you stil have a setup program for iTunes 5, you may want to back that up as well and re-install that after your original install is complete.
I have re-charged my iPod, and listened to it for a bit, with no song skipping, and all songs I have asked for on it. I'll keep an eye on it over the next couple of days, but it seems like I have cured my sick iPod. -
Need help bad, screen problem
heres my problem. i setup arch on my desktop last night (64bit), i installed my nvidia drivers. i have a 21" crt sun monitor, not sure the model number. but i brought it to a friends this morning to update and install kdemod since they have highspeed. now i was hooked up to their monitor, they have a cheap 15" crt. so it worked fine there, now when i got it home, i get a black screen when it boots up on my monitor, i can get to a console however
i deleted a couple lines in the monitor section in the xorg.conf............so now i get 640x480 res, but i cant use anything higher
been searching around, and i found some stuff about running Xorg -configure, but i get something about a tmp file being locked..........and i dont know how to delete anything here from the console
i need help here
Last edited by ssl6 (2007-09-16 07:00:40)nvm, i just deleted the xorg.conf and rebooted, its fine now
edit// nvm, its not using my nvidia driver.........i might still need help, im trying something right now, not sure what im doing though
ok, i tried to run nvidia-xconfig, and when i rebooted, im back to square one with my monitor flashin an invalid scan frequency
well, i deleted the xorg.conf again and got it booted up. but i generated a new one with nvidia-xconfig again, heres what i puts out, i just need to remember not to reboot any time soon. im using a 7900gs, the newest nvidia 100 series drive from the repo, and arch 64bit on this system by the way
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Jun 13 16:54:14 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
here's that part of the xorg.conf from my other computer running 32bit arch with a geforce 3 connected to the same monitor via kvm switch. this machine is using a 96xx driver though
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "sun"
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 65536
# Insert Clocks lines here if appropriate
Identifier "geforce"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "geforce"
Monitor "sun"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
any ideas here?
Last edited by ssl6 (2007-09-16 07:53:48) -
Need Help for connectivity USB Cable Nokia 5800 ca...
Hi All,
I really need help to solve my problems. I just bought nokia 5800 XM last week. I already installed the CD software in my windows XP, but it seems that PC cannot recognize the USB cables. I have plug in an unplugged... At firstime it detects my nokia 5800 XM, but when I open PC suite or OVI, it doesn't connect the USB cables into PC. I already install and uninstall The OVI suite but it is still the same, when I try it in OVI suite to detect my phones, it doesn't react.... I also have download from Nokia website to install manually Nokia USB cable driver for my cable type CA-101... it seems nothing works here... tell me what should I do? I don't think that the USB cable I bought is fake, it has original guarantee..... please desperately need help! Anybody?When you plug the phone into the computer, ON THE PHONE it should ask you which mode to connect in, and you should select "PC Suite" mode. Does this happen?
Ravi -
I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799
Maybe you are looking for
-
Summary Report For Store Activities.
Dear Gurus.. I need to make a summary report on Store Activities. Having following Fields. Material number | Material Description | Material Unit | Opening Balance | Quantity | Receipts | Quantity | Issues | Quantity | Closing Balance | Quantity |
-
The Action in My jsCookMenu is not invoked Properly ..
Hi all, I know this is an old issue but unfortunately no solution yet ??? i read a lot of older post describing the problem but with older versions of Myfaces and tomahawk and the solution was to put the : <input id="jscook_action name="jscook_action
-
How do I save my pictures from iPhoto on my time capsule and not on my computer to save space?
I have over 10,000 pictures in iphoto library. I am getting an error constantly that my start up disk is low on space. I have a time capsule but how do I get my photo's from my iphoto library to ONLY save on the time capsule so that it doesn't take u
-
I have iBook G4 running OS 10.4.11 and I have some files from my cache that will not delete. I have tried using OnyX, secure empty of trash, and option empty trash but nothing works. The files say they are in use. How do I dump these files? Is there
-
So i recently accendetly reset my ipod touch 5th gen
and when i tried to click the icon that says restore from backup it said that the latest version of ios7 was not installed but it was (i am sure) and that i should first click the "setup as a new ipod option" so i did and now i lost all my files incl