Need Help iPod Error

My iPod constantly crashes.
I can use the iPod like normal, when all of a sudden the screen goes white, then it reboots.
it says to connect to iTunes. so I connect and restore. but the restore will fail a few times before it will actully works. After the iPod is fully restored, It will work but for only a few minutes then it happens all over again. I've tried different ways of rebooting, but it always seems to crash. Does anyone have a solution?

Restore and set up as a new iPod but DO NOT SYNCH anything from your library. Set up networking and "play" with the iPod. DO NOT install or download ANY THING, especially apps. Take some photos, take some videos, record some voice files, surf the internet, etc.
If the iPod still crashes, then there are two possibilities:
1. You have a hardware issue.
2. iOS is bad/corrupted.
To see if iOS is the problem, use a different computer to download iTunes, and then use that computer to download iOS and do a restore to factory defaults. If the iPod still crashes, its definately hardware.
If the iPod is stable from the initial restore and set up as new, then the problem is software. Try synching your apps one at a time, testing the iPod after each app is synchd. This should help you find the "bad app". At that point you can unsynch the "bad app" and move on... Be sure to test the iPod between apps.....
Good Luck...

Similar Messages

Need help with error message 213:8

Need help with error message 213:8, this error message prompted after re-installing CS5.5 on the same machine (W7 Pro)
Thanks.

Hi TKA_,
Please try the solutions mentioned on following forum thread.
http://support.muse.adobe.com/thread/1305941?start=0&tstart=0
Let me know if it works?
Regards,
Sumit Singh

HT1212 Need help ipod has been disabled won't let me conect to itunes

Need help ipod has been disabled what do i do?

If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Need help with error code 1714!!!!!!!!!!! Please help

Need help trying to upgrade itunes for windows, i get to a certain point and the following error comes up "ERROR 1714: THE OLD VERSION OF ITUNES CANNOT BE REMOVED CONTACT YOUR TECHNICAL SUPPORT GROUP" i click ok and then another error comes up "ERROR 1603 FATAL ERROR" can anybody help Please!!!!!!!!!!!!!!!!!!!!

hi wags!
hmmmm. okay, let's try using the complete uninstallation instructions from the following document to remove your existing itunes and QT:
Trouble installing iPod, iTunes, or QuickTime software in Windows
if you do that first, will the new itunes install go through properly?
if you get an error message on the uninstalls, let us know what it says. include error message numbers if you're getting any.
love, b

Need help deciphering error messages!!!

My iTunes library was continually acting up, so I finally decided to start fresh. I restored & updated iTunes, Quicktime, & my iPod. I followed the directions from a question I posted here. I drag and dropped the music back into the "clean" library, and everything was going great.
Now I'm getting the same error messages as before. I was adding music and this message appeared.
Error Message:
The file "iTunes Library.itl" does not appear to be a valid music library file. iTunes has attempted to recover your music library and renamed this file to "iTunes Library (Damaged).itl".
My library.xml file was missing some music, so I added it back to the library.itl file to see if it would work. It appeared fine afterward. The next day I went in to recreate my playlists, and received the following error.
Error Message:
The iTunes Library cannot be saved. An unknown error has occurred (-1450).
Questions:
1. What is error 1450?
2. Are my music files (that I drag & drop)contaminated and need to be deleted and reimported?
3. What are the causes of the 2 error messages above? I copied them to my notepad exactly as they appeared on screen?
4. When iTunes creates a library (damaged).itl file, it also creates a new music file: song 1.m4a replaces song.m4a - which version do I keep?
The only good news is that my iPod has always worked fine. It has no music on it now, and I don't want to hook it up to a contaminated library.
Need help desperately...I'm beginning to hate iTunes...just want to use my iPod.
Dell Inspiron 6000 Pentium Windows XP 1.6 GHz, 1G RAM

When iTunes creates a library (damaged).itl file, it also creates a duplicate song file.
song 1.m4a replaces song.m4a - which version can I delete without creating problems?

Do you need help with error code 1004

The alert message in iTunes may include one of the following numbers (or the message may include a number not listed here):
1, -1, 2, 4, 6, 9, 13, 14, 20, 21, 23, 26, 28, 29, 34, 35, 36, 37, 40, -48, -50, 1000, 1002, 1004, 1011, 1013, 1014, 1015, 1479, 1600, 1601, 1602, 1603, 1604, 1611, 1631, 1638, 1639, 2001, 2002, 2005, 2006, 2009, 3002, 3004, 3013, 3014, 3015, 3194, 3200, 9006, 9807, -9808, 9844, 4026xxxxx.
Click the link for the error code you have. If it's not listed here, check the error messages below, and then if necessary follow the advanced steps below to resolve the issue.
Resolution
Specific error messages and resolutions
Collapse All | Expand All
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below in Unable to contact the iOS software update server gs.apple.com.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service. If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1611
This error typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
Error 13, 14, 35 and 50 (or -50)These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
There was a problem downloading the software for the iPhone (or another iOS device)
See the steps below for error codes 3000-3999.
iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.
Unknown Error containing "0xE" when restoring
To resolve this issue, follow the steps in iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting. If you have a Windows computer with an Intel® 5 series/3400 series chipset, you may need updates for your chipset drivers. See iTunes for Windows: Issues syncing iOS devices with P55 and related Intel Chipsets for more information.
Hang during restore process

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

I need help with error ORA-06502: numeric or value error

Hi, all, i need help finding the error here, im getting a numeric or value error when i add information to the variable vlcadena when vlcadena is a clob type, and i check the length of the vlcadena variable and sometimes makes the error at 8000 characters some other times 32k i have no idea whats happening, does anyone have a clue?
PROCEDURE REGISTRO_551 (
VPNUMPARTE IN PARTESC.NUMPARTE%TYPE,
VPFRACCION IN IMPOMAT.FRACCIONMEXIMPO%TYPE,
VPDESCRIPCION IN PARTESC.DESCESPANOL%TYPE,
VPVALORDLS IN IMPOMAT.VALORDOLARES%TYPE,
VPCANTIDAD IN IMPOMAT.CANTIDAD%TYPE,
VPUNIMED IN PARTESC.UNIMEDPARTE%TYPE,
VPCANTIDADTARIFA IN IMPOMAT.CANTIDAD%TYPE,
VPVALORAGREGADO IN EXPOPT.VALORAGREGADO%TYPE,
VPPAISORIGEN IN PARTESC.PAISORIGEN%TYPE,
VPCOMPVEND IN PARTESC.PAISORIGEN%TYPE,
VPTIPOFRACCION IN IMPOMAT.TIPOFRACCION%TYPE,
VPPESONETO IN IMPOMAT.PESONETO%TYPE,
VPTIPOMONEDA IN MIMPOMAT.TIPOMONEDAEXTRANJERA%TYPE
) AS
BEGIN
    vgproceso := 207310;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||'551'||'|'; --1. TIPO DE REGISTRO
    vgproceso := 207311;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPFRACCION||'|'; --2. FRACCION
    vgproceso := 207312;
    vllong2:=length(vlCadena);
    QUITA_ENTERS(NVL(VPDESCRIPCION,' '),VLTEMP);
    IF LENGTH(VLTEMP)>80 THEN
        VLTEMP:=SUBSTR(VLTEMP,1,80);
    END IF;
    vgproceso := 207313;
    vllong2:=length(vlCadena);
    IF VLTEMP IS NULL THEN
        vlCadena:=vlCadena||'|'; --3. DESCRIPCION
    ELSE
        vlCadena:=vlCadena||VLTEMP||'|'; --3. DESCRIPCION
    END IF;
    vgproceso := 207314;
    vllong2:=length(vlCadena);
    IF VPNUMPARTE IS NULL THEN
        vlCadena:=vlCadena||'|';--4. NO. DE PARTE
    ELSE
        vlCadena:=vlCadena||VPNUMPARTE||'|';--4. NO. DE PARTE
    END IF;
    vgproceso := 207315;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPVALORDLS||'|'; --5. VALOR MERCANCIA
    vgproceso := 207316;
    vllong2:=length(vlCadena);
    vlCadena:=vlCadena||VPCANTIDAD||'|'; --6. CANTIDAD COMERCIAL
    vgproceso := 207317;
    vllong2:=length(vlCadena);
    IF VPUNIMED IS NULL THEN
        VPDESCERROR:='ALGUNA PARTIDA CON FRACCION '||VPFRACCION||' NO TIENE UNIDAD DE MEDIDA';
    END IF;
    vgproceso := 207320;
    GET_CATGRAL('ADUANAS','UNIMED',NVL(VPUNIMED,' '),CL_D1,CL_D2,CL_D3,CL_D4,CL_V1,CL_V2,CL_V3,CL_CATG);
    IF CL_V2=0 THEN
       vlCadena:=vlCadena||VPUNIMED||'|'; --7. UNIDAD MEDIDA COMERCIAL
    ELSE
        SELECT TO_CHAR(TRUNC(CL_V2)) INTO VLUMCOMERCIAL FROM DUAL;
        IF LENGTH(VLUMCOMERCIAL)=1 THEN
            VLUMCOMERCIAL:='0'||VLUMCOMERCIAL;
        END IF;
        vlCadena:=vlCadena||VLUMCOMERCIAL||'|'; --7. UNIDAD MEDIDA COMERCIAL
    END IF;
    vlCadena:=vlCadena||VPCANTIDADTARIFA||'|';--8. CANTIDAD TARIFA
    vlCadena:=vlCadena||VPVALORAGREGADO||'|';--9. VALOR AGREGADO
    GET_CATGRAL('ADUANAS','CONFADU','IVIN-REG',CL_D1,CL_D2,CL_D3,CL_D4,CL_V1,CL_V2,CL_V3,CL_CATG);
    vlCadena:=vlCadena||CL_D1||'|'; --10. VINCULACION
    vlCadena:=vlCadena||CL_D2||'|'; --11. METODO DE VALORACION
    vlCadena:=vlCadena||'|'; --12. MARCA
    vlCadena:=vlCadena||'|'; --13. MODELO

If the expected maximum length of the concatenated string is less than 32K, then use VARCHAR2 and at the end convert to CLOB if necesary.
:p
PS: At what line in the code does it give the error?
Edited by: LKBrwn_DBA on Aug 20, 2009 2:49 PM

Need help with error: No bootable device -- insert boot disk and press any key

Hello, I need help will my laptop and the error, the message says "no bootable device ", I have tried taking out the hard drive but it still doesn't work. My laptop is a Satillite C55D-A5372. I need help with this; if you know about this ans know how to fix it please reply or email me @ [email protected]
If needed more clarifications ask me.
Thank you,
Jkmano

if you got into the bios/uefi and have determined that the hdd is being detected then that is good. At least the hdd is operating to some extent, although still may be corrupt OS or the like.
Eagle asked you what OS your using (i.e., Windows 8.1 64-bit, Windows 7 32-bit, etc.). I see that English is not your native language so we'll just have to work with that as best we can.
Did you make any changes to the operating system (OS) as a result of the link you posted, and what were they?
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Need help with error code 150:30

need help with finding out what error code 150:30 is and how to fix it

See the following:
Error 150:30 - Error "Licensing has stopped working" | Mac OS :
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html

Need help with error

Need help figuing out why I'm getting the following error
message trying to launch a training CBT and what to do to fix
it...?
Adobe Flash Player Security
Adobe Flash Player has stopped a potentialy unsafe operation.
Teh follwoing local application on your computer or netwrok:
X:\XXXXXX\XXXXXX....\XXXXX
is trying to communicate with this Internet-enabled location:
X:\XXXXXX\XXXXXX....\XXXXX
To let this application communicate with the Internet, click
Settings,
You must restart the application after changing your
settings.

<itunes:category text="TV & Film">
<itunes:category text="TV & Film/></div>
The two lines I've quoted above should be replaced with:
<itunes:category text="TV & Film" />
The "TV & Film" category has no subcategories so should be closed on it's own. See the example feed at http://www.apple.com/itunes/store/podcaststechspecs.html#_Toc526931673 which uses the TV & Film category.
Hope this helps,
Greg

Need help with error: XML parser failed: Error An exception occurred! Type:......

Need help with the following error.....what does it mean....28943 3086739136 XML-240304 3/7/07 7:13:23 PM |SessionNew_Job1 28943 3086739136 XML-240304 3/7/07 7:13:23 PM XML parser failed: Error <An exception occurred! Type:UnexpectedEOFException, Message:The end of input was not expected> at 28943 3086739136 XML-240304 3/7/07 7:13:23 PM line <7>, char <8> in <<?xml version="1.0" encoding="WINDOWS-1252" ?> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfigurations> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <DSConfiguration default="true" name="Configuration1"> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <case_sensitive>no</case_sensitive> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <database_type>Oracle</database_type> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_alias_name1>ODS_OWNER</db_alias_name1> 28943 3086739136 XML-240304 3/7/07 7:13:23 PM <db_ali>, file <>. 28943 3086739136 XML-240307 3/7/07 7:13:23 PM |SessionNew_Job1 28943 3086739136 XML-240307 3/7/07 7:13:23 PM XML parser failed: See previously displayed error message.Any help would be greatly appreciated. It's something to do with my datasource and possibly the codepage but I'm really not sure.-m 

please export your datastore as ATL and send it to support. Somehow the internal language around configurations got corrupted - never seen before.

Need help finding errors.

I need help finding the error(s) in my code. I am writing a program to convert decimal to binary. It is not an application. It is more of a blue print for an object.
The Program is:
public class DecimalToBinary
     private long decimal;
     private long binary;
//Constructor setes the variable decimal and coverts and sets the variable binary
public DecimalToBinary(int decValue)
     decimal = (long)decValue;
     binary = convert(decValue);
//This method does the actual conversion from decimal to binary
public long convert(long dec)
          long remainder = 0; //Start with initial value
     String bin = ""; //Start with a blank string
          while (dec > 0)
          remainder = dec%2; //get remainder
               dec /=2; //get the number divided by 2
               bin = remainder + bin; //concatenate the remainder to string
     return Long.parseLong(bin);
     //Accesor methods to get the value of decimal
public long getDecimal()
     return decimal;
// Accessor Method to return binary Value
public long getBinary()
     return binary;
// To string to represent Object.
public String toString()
     String result = "";
result = decimal +"\t\t\t" +binary;
     name1.getDecimal()
     return result;
The error I am getting is:
DecimalToBinary.java:56: ';' expected
     name1.getDecimal()
     ^
1 error
----jGRASP wedge2: exit code for process is 1.
----jGRASP: operation complete.
I've tried putting the ; in there but it doesn't help and only throws another error.

Did you read the error message?
DecimalToBinary.java:56: ';' expected
name1.getDecimal() What is missing? Can you see where on the line of code it has identified that the missing thing is?

Need help. iPod disabled and unable to connect to iTunes for a restore???

Please Help!!! My iPod touch is giving me a red box error stating "iPod is Disabled" and telling me to connect to iTunes. I tried to connect to iTunes but am getting the error message "iTunes could not connect to iPod because it is locked with a passcode. You must enter your passcode on the iPod before it can be used with iTunes".
I am unable to enter the passcode because the iPod touch is disabled and will not let me.
Does anyone know what to do?
Thanks for your help.

Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

Legally-Blind. Need Help. got error (-50) syncing Christmas gift nano

Hello! I'm legally-blind and need immediate help with my wife's 3rd gen Nano I'm giving to her for Christmas! I've completed as much as I can determine using Apple Support. I receive error: "iTunes could not copy 'song title' to the iPod 'iPod name' because an unknown error occured (-50)."

Not sure why it was set up in iTunes instead of on the iPod itself, or why it tried to restore, but try here: http://support.apple.com/kb/HT1808

Need help in error fixing in Unicode platform in ECC 6.0

Hello Experts,
I am getting an error as below:
"TEMP_HEX" must be a character-type data object (data type C, N, D, T or STRING) . for the code below:
data: TEMP_HEX(1) TYPE X VALUE '7F',
temp_char type string 'plz help me'.
REPLACE ' ' WITH TEMP_HEX INTO temp_char.
could anyone suggest the solution for converting '7f' to character...
plz its urgent i am having an issue about this...
Thanks,
Laxmi.

Hi Laxmi,
Can u pls explain exactly u want to do.
becoz u can use replace syntax only with the data types
Char,Numc,Date,String and Time . No other data type is allowed.can u explain what is ur need ???
Regards,
Balakumar.G.

Need Help iPod Error

Similar Messages

Maybe you are looking for