Need Help, Issue With Porting Number

Hey I ported my number from sprint, but right now I have service on my iphone and my old sprint phone and if I send a text from iphone I get a response on sprint phone. Anyway I can fix this? Or will it work itself out with time?

That is normal for porting your phone number, within a few more hours, it will all switch over to the iPhone, you will recieve a text message confirming once this is complete. So, just hang on to the Sprint phone a tiny bit longer, you're almost there!

Similar Messages

Need help, issues with my iPhone 3GS

Hi all,
So I've had my iPhone now for a few days and I like it, but thee are some issues on it that I have not ben able to resolve.
Just a comment, I thought that the iPhone could play MIDI files that most of the mobiles phones can play today for ring tones.
Now to my issues.
If I receive an MMS with an audio clip with the .amr extension, is the iPhone not able to play that?
Since I am not able to do it.
Also, my mail provider use TLS for incoming connection to the mail server and iPhone doesn't seem to support th.
Using v3.01. Any info or help is appreciated, many thanks!

Chris08 wrote:
Just a comment, I thought that the iPhone could play MIDI files that most of the mobiles phones can play today for ring tones.
The iPhone uses .m4r format for ringtones. Google ehow iPhone ringtones to learn how to make your own.
If I receive an MMS with an audio clip with the .amr extension, is the iPhone not able to play that?
If you are in the US, MMS is not available yet.
Also, my mail provider use TLS for incoming connection to the mail server and iPhone doesn't seem to support th.
I'm not familiar with TLS and just use Gmail on the iPhone.

Starting gateway with port number crashes in linux

Hi,
I am trying to start gateway server with port number as:
$start_ns -p 2320 (crashes with core dump).
$start_ns '-p 2320' ( starts and works fine) or start_ns "-p 2320"
Q: does this (single or double cote) is recommended way to start ?
Kindly add your comments on this.
Thanks in advance if some one can clarify this doubt.
Mangilal

Hi Wilson,
Thanks for your suggestion and help.
Since start_ns have a options to start with port number and we are testing siebel gateway under HA solutions.
This is one of the test scenario we need to test with all the options.
Same command works fine with AIX and solaris but fails in Linux.
We already referred with http://download.oracle.com/docs/cd/E14004_01/books/SystAdm/SystAdm_SrvrSysSrvc6.html..
Just need to know the purpose of using port number option while starting gateway.
We didnt found any where in Siebel docs how and why to use port number option.
Question is, how start_ns allowing with single & double cotes but not without quotes?
Kindly clarify about this , i am very much confusing.
Thanks and Reagrds,
Mangilal D

Need help in finding the number of occurrences of a pattern.

Hi All,
I need help in finding the number of occurrences of a pattern in a table's column's data.
Consider sample data - one row's column from a table:
"S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C"
My requirement is:
I should get the count of S's which are immediately preceded by A or P.
for the above data i should get count as 3+2+1=6 (S-S-S-A, S-S-P, S-A)
The pattern data is stored as VARCHAR2 type.
Thanks in advance,
Girish G
Edited by: Girish G on Jul 21, 2011 11:22 PM

I am sure there exists a better way then this one:
SQL> with dt as
2 (select 'S-S-S-A-S-S-P-S-S-B-S-A-P-S-S-C' str from dual)
3 SELECT SUM(Regexp_count(Regexp_substr(str, '(S\-?)+(A|P)+', 1,
4                                     Regexp_count(str, '(S\-?)+(A|P)+') - (
5                                                  LEVEL - 1 )), 'S')) len
6 FROM   dt
7 CONNECT BY LEVEL <= Regexp_count(str, '(S\-?)+(A|P)+')
8 /
       LEN
         6

Issue with range number at VF02 when releasing to accounting

Hi Gurus,
We have an issue with the number range at VF02 when releasing the invoice to accounting.
Error message is "For object RF_BELEG E178, number range interval 6A does not exist FBN1"
But when entering tx-FB1N for Company code E178 , it is not clear where range interval 6A is set for number range assignment.
Where is the range interval entered in sales so accounting document is generated?
thanks,
VL

hi
this is to inform you that
please go to SNRO - give object RF_BELEG for company code E178 & maintain number ranges for 6A.
you can do it in FBN1 also.
there will be three push buttons
maintain
change
display
we need to maintain in MAINTAIN.
before maintaining please verify whether number ranges for 6A has been maintained or not.
please follow the steps and proceed this clears your issue.
balajia

How to run Indesign CS3 as a Service with Port number

Hello all,
I would like to run the InDesign CS3 Server as a service on Windows. It seems that after installing the Server it automatically installs as a service. But where can I assign the port number. If under Services properties of InDesign Server under Parameters I mention -port 1050 on Ok button it removes the parameter information.
I am doing right or is there some other way to start the Server as Service with Port number.
Thank you all in advance.
Regards
Farzana.

Hi Sascha,
have you tried to remove the service and install it manually?
\"Path to IDS"\InDesignServerService /install /u
\"Path to IDS"\InDesignServerService /install
I guess you've tried to start the instance in the console already (successfully?).
Regards
Ingo
Am 05.07.2011 um 12:18 schrieb 1000grad_Sascha:
Hi Ingo,
I've installed the Snap-In and configured one instance. Maybe it's worth mentioning that there are some instances running at the same time, which have been started using the console. Hope that's not interfering. However, the MMC-configured instance uses a different port.
I tried to start the service with a huge range of users having all imaginable privileges. The common way of using either "LocalService" or the Local System Account (which has admin rights for me) doesn't do the job.
cheers,
Sascha
>

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

I am having the same problem...did you ever fix it?

I cannot install properly my CS6 version on a second computer it seems that there is an issue with serial number I will appreciate some guidance thank you

I cannot install properly my CS6 version on a second computer it seems that tree is an issue with serial number I will appreciate some guidance ? thank you

Hello,
please have a look there: http://www.adobe.com/products/cs6/faq.html >>> Can I distribute a Creative Suite 6 edition across multiple users or computers? >>> The software license agreement accompanying your product may entitle you to install and activate the software on two systems with certain restrictions. The product license agreement for Creative Suite 6 does not allow you to install the components of a single suite edition across multiple computers. See the software license agreement for more information.
It could be necessary to activate/deactivate please have a look there:
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Good luck!
Hans-Günter

Issue with Serial number inheritance in PP order

Hi gurus,
We have an issue with inheritaning component material serial no. to header material.
For production order having different header material and component material,on GI, the serial no. assigned to component is inheritated to header material. We can see the serial nos. in order, Header --> Serails Numbers. This functionality has been implemented in BADI 'MB_MIGO_BADI' method POST_DOCUMENT' using FM 'SERNR_ADD_TO_DOCUMENT'.
But, the issue is when the production order is having same header and component material. And on GI, the serial no. is not getting inherited into header material ie., the serial nos. are not visible in production order ,Header --> Serial Number.
Is there any other FM for handling the serial numbers for order having having same header and component material?
Note: The material is serialized material.
Thanks & Regards,
Chandra Sekhar.

Tried the "live" chat. What a waste of time:
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 54 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with Farook.
Farook: Hello! Welcome to Adobe Customer Service.
Farook: Please allow me a moment to review your request.
Farook: Hi Martin.
Martin: Hi.
Martin: For reference the serial number is <deleted>
Martin: Purchased from Amazon.co.uk in January.
Farook: I understand that you are unable to install the software. Am I correct?
Martin: No. I installed it, activated it fine on my laptop but when I tried to do the same on my desktop PC the serial number conflictr was detected and both are now blocked.
Martin: Farook, I suspect you won't find this in your FAQs, since it isn't on the support website. Can you escalate?
Farook: I am sorry to hear that.
Farook: Can I have your full name and email address?
Martin: Martin Lampard
Martin: <deleted>
Farook: Thank you.
Farook: Martin, I am sorry, the serial number which you have provided has not registered with.
Farook: Hence, you need to contact Amazon.
Martin: Rubbish. I had activated it on my laptop. I am 100% certain.
Farook: I understand Martin.
Martin: How did you check the serial number?
Farook: Could you please re-confirm me the serial number?
Martin: <deleted>
Farook: Thank you.
Farook: Martin, I am sorry, you need to contact Amazon.com.
Farook: I am sorry for the inconvenience caused to you.
Martin: Why? They sold me a working copy of Dreamweaver.
Farook: I understand, but I do not have enough resources to help you further.
Farook: Please contact Amazon.com.
Martin: What a waste of time. Makes me sorry I bought this Adobe product.

Seeting cookies for different domain with port number

Hi,
I've been desperately trying to solve this for a few days now so thought i'd give up and ask.
Basically, when a user logs into the website, the idea is for them to be automatically logged into the bulleting board. This is being done by setting a cookie(I won't go into detail as it's not relevent).
The cookie is being created in one domain (.stage.csu.ac.uk) and needs to be used by another, .prospects.ac.uk. However, the board is on servername.prospects.ac.uk:81, which means that the cookie isn't being picked up.
I've been tearing my hair out for days about this. I can't change the fact it's using port 81, and there's no other way of doing this log in.
If ANYONE can help, I would not be able to say thanks enough.
Sam.

Perhaps you can call a jsp on the other server to set the cookie for you, for example by loading it in a hidden iframe?
This has some maintainance issues because you need to provide a full url to the jsp on the other server, so if anything changes (port number for example) then this solution will break.

Need help: Problems with exported Dreamweaver html file in different browsers

I'm trying to send out a newsletter, and had our designer create it in Dreamweaver, and then export and html file which we uploaded. For some reason it looks wrong on Mac's, Gmail, and a few issues with Outlook. Does anyone know how to help with this, or had to work around this problem in the past?
I've attached our html file as well.
We're an eco startup with limited time and budget - so any help you have would be so appreciated.
Thank you!!

      World Centric Monthly Newsletter   August 2009
Palo Alto Joins the Ban Against
         Non-Recyclable Materials
       This Spring, Palo Alto joined the list of more than 30 cities and counties in California who are making good on their efforts toward reducing their greenhouse gas emissions
       by enacting partial or comprehensive bans on polystyrene (PS) foam and/or non-recyclable disposable foodservice containers. Around the same time, a California statewide ban on the use of PS containers was tabled before reaching the State Assembly floor. Representative
       Jerry Hill, one of AB 1358’s sponsors, pulled the bill due
       to concerns addressed in the Appropriations committee hearing of the bill, regarding the fiscal impacts which
       were not addressed in bill’s contents.
       Largely represented by the California Restaurant Association, opponents of AB 1358 lobbied legislative representatives and argued there would be a negative fiscal impact on struggling restaurant owners and their customers in order to accommodate the more expensive alternatives to PS containers.     There are the unquantifiable and “hidden” costs of contaminating our bodies and environment which would far surpass the fiscal impact on the plastics, restaurants and consumer industries. Studies published by the Foundation for Advancements in Science and Education have indicated that varying levels of styrene residues
         are present in 100% of all human fat tissue in the
         United States, as PS products are found to lose weight after in contact with hot or fatty/acidic foods and liquids, causing migration of the styrene into the food or fluid, ending up in the human body. On the high end, the levels were “one third of levels known to cause neurotoxic symptoms”. In the environment,
         PS is rarely recycled and does not biodegrade.     Supporting safer alternatives to polystyrene, in addition to the collection infrastructure and processing mechanisms for the compostable and recyclable products would help create more green jobs in the long run and would be a move in the right direction away from unnecessary harm
       to our health, our communities and our world. Keep your eyes open for a revised version of AB 1358 in Spring 2010!     For more information about polystyrene
       visit Earth Resource.     For a partial energy, emissions and water analysis
       of polystyrene and its alternatives visit our website.           World Centric Compostable
         Hot Cup Lid
         World Centric is pleased to announce we now offer a fully compostable hot cup lid that
         fits our 10oz, 12oz, 16oz,
         and 20oz paper hot cups.
       The lids can be ordered in cases of 1000 or packs of 100.
       For more information or to order, please visit our website.           This Month
         We’d Like to Applaud
       Project Open Hand
       San Francisco's non-profit
       organization that prepares and delivers food to seniors, people living with HIV and homebound critically-ill residents. For nearly 25-years Project Open Hand has been providing “meals with love” to local residents in need of help and care in
       California’s San Francisco and Alameda counties.
       Programs include meals, groceries and nutrition information as well as education and referral programs
       for all of the people served. A staff dietitian also visits several sites per week to speak with seniors and critically ill local residents about the importance of eating well
       and staying healthy.
       Project Open Hand continues to serve nearly 800,000 annually and has served as a model for over 100 organizations across the United States and the world.
       If you are interested in making a donation,
       please visit Project Open Hand.
       Help Project Open Hand continue to do what it
       does best – deliver quality food to those in need.
“World Centric has gone
           about every aspect of
           business in the most
           sustainable of ways.
           It is a model for socially
           responsible business.”
           Ari Patz
           Styrophobia
               Industry Trends
           Although PLA is a sustainable alternative to a petrochemical-
           derived product, its limitation has
           been not only its cost, but its inability
           to maintain structural integrity in hot temperatures and humid conditions because of its low melting pint.
           However, researchers at Teijin
           (formerly in partnership with Cargill)
           have improved their plant-based
           ‘Biofront’ PLA polymer to be able
           to withstand higher temperatures –
           by modifying its hydrolytic resistance.
         Get more information here.
               Get Great Deals!
               Check out our clearence items.
               Did you know?
           Styrene can leach from polystyrene.
           Over the long term, this can act as
           a neurotoxin. Studies on animals
           report harmful effects of styrene
           on red-blood cells, the liver, kidney,
           and stomach organs.
           US Environmental Protection Agency (1992) “Styrene”. Air Toxics Website.
               Where to Find us:
               CRRA Conference
               August 2 - 5
               Palm Desert
                      Western Foodservice
& Hospitality Expo
             August 30 - September 1
          Livable Green
             September 19
San Mateo
   Find us:            World Centric
2121 Staunton Ct. Palo Alto, CA
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.
You are subscribed as <[email protected]>. Click here to manage your email subscription preferences.
Click here or reply to this email with 'unsubscribe' in the subject to unsubscribe from this list or if you feel you have received this message in error.
This message was sent from World Centric 2121 Staunton Ct Palo Alto CA 94306 United States. Click here to report email abuse.

Need help dealing with nested audio in Premiere Pro CC 7.2.2

Hi, so previously I have been working with nested multicam video and nested audio together (one video track, and one audio track).
However, I am hitting some issues with the nested audio workflow, and am hoping someone could help me iron out my issues.
1. Once I've completed my edit, how do I efficiently flatten my nested edits so I have all of my original audio back? (For mixing purposes)
2. Audio nesting sometimes seems glitchy. When making new nests, sometimes I will only get the topmost audio track in my nest, and I'm not sure what's causing that to happen.
I REALLY need helping getting my workflow together, as it's at a bit of a stand still right now. I think I'm going to switch to unnested audio to avoid issues, but still need to flatten my existing edits to do that as well.
Many thanks!

This bug is NOT FULLY FIXED. I'm on a tight deadline so i'm not looking very hard online to see if i'm alone - so please forgive me for just posting here...
I'm using CC7.2.1 it's 1/21... very grateful that match frame FINALLY works on merged clips, but, again, this insert/overwrite bug is only PARTIALLY FIXED.
Insert/overwrite with merged clips on 3-point edit now works, but ONLY when cutting in BOTH merged video+audio... if you're just trying to cut in the audio from a merged clip using a 3-point/4-point edit via hotkey, it's a no-go.
I, for example, needed to re-cut in audio under some video with effects on it. So, I unpatched the video source completely and patched source audio tracks 1-4 to the appropriate sequence tracks. Upon hitting insert or overwrite multiple times, nothing responds. The only way to cut anything in from the source (merged clip) was to patch the source video back into the timeline on an unused video track, then cut ALL the tracks from the source in, I then had to delete the video track re-link the now free audio to the original video. Not a big deal, but annoying enough & waste of precious time on tight deadline.
So, yeah, I have a workaround but is still not appropriate to have a core function not work properly. Especially when I'm working with a very complicated timeline.
That said, thanks for keeping on top of our gripes, Mark.

F4 help issue with Webdynpro ABAP application

Hi,
I am facing a strange issue with the F4 help in my webdynpro abap application.
I have few fields for Purchase Order and Line item on the screen and they have corresponding F4 helps associated with them.
When i select for F4 help, sometimes the screen simply blanks out and a white screen is displayed. When i refresh the screen and try the same scenario again, i can see the value list correctly.
This issue occurs very randomly with no specific pattern. If anyone else has faced this issue earlier, kindly let me know how to get rid of this issue.
Any pointers to resolve this issue will be helpful.
Note: I am using SAP version 702 SP09.
Thanks,
Ramanath

Hi,
we cannot help you from offline, you need to check the standard procedures like
SICF->is your application node is active.
FQDN->check fully qualified name is configured
You can also try to execute standard SAP application, if sap application also has problem running then you may have to get the help of BASiS people to look into that and raise a support ticket.
If sap applications are running and your custom developed applications are not running then look into this application if there is any URL parameters need to supply etc.

NEEDING HELP URGENT WITH ADOBE GAMECENTER 64 bit ANE

Please guys, i'm needing ao much help with this ane... I'm using adobe flash CS6 with the last update. My problem is when i try to build ipa with gamecenter 64bit ane and productstore 64 bit ane delivered from adobe. I always get libgamecenter.a and libproductstore.a are required... But insine ane/meta-.../ there is a libxx.a file... I tried to do all and nothing works and i realized that if I create a new file, and try to use this anes i get another error in CS6 telling that temp files are not found as ABC (something like this).
i'm needing this to much because i'm finishing my game to publish...
please if you know how to fix it help me.

Can´t anybody helps me?? I´m needing so much help. Pls what can i do to solve this all?
Using Air 16.0.0.222 i got this error in Itunes:
"Dear developer,
We have discovered one or more issues with your recent delivery for "MaxCliks". To process your delivery, the following issues must be corrected:
Missing 64-bit support - Beginning on February 1, 2015 new iOS apps submitted to the App Store must include 64-bit support and be built with the iOS 8 SDK. Beginning June 1, 2015 app updates will also need to follow the same requirements. To enable 64-bit in your project, we recommend using the default Xcode build setting of “Standard architectures” to build a single binary with both 32-bit and 64-bit code."
When i try to Simulate my app using Flash Player Simulator (Ctrl + Enter) I get this error - "The content cannot be loaded because there was a problem loading an extension: Error: Duplicate platform iPhone-ARM found for extension com.adobe.ane.gameCenter".
Using Air 17.0.0.138:
Using Air 17.0.0.138 creating a new test file using only adobe Gamecenter 64bit shared by Abhinav Dhandh:
Using Air 16.0.0.222 i can build ipa but can´t submit. Can someone helps me pls i´m needing this too much!!!
Since now thanks!

Hello everbody - i need help please with forms

hi
i am new in forms
and i have a project to do
i learn a lot and read oracle books about forms but in the many time it didnot help alot when i try to build and write scripts or procedure or triggers.
i would like to ask a little help
if anyone can help me with links or a web site that i can download form FMB file so i could run them and learn from its scripts_ and
how to build form in the best way
some of my problem are:
- how to call a reports from a form with a button
- how to work with date, hoe to calc the hours between two dates
- i have built a query and i need to find the number of the rows (and the summary with count didnot work coz all the items aren't numbers
thanks alot
hope to get some information

Did you take a look at this?
regards

Need Help, Issue With Porting Number

Similar Messages

Maybe you are looking for