Need help knowing which effect this is.
Hey guys I need some help with an effect in a video I saw and I was thinking maybe someone here would know which effect this is.
So it's the effect that occurs after 10 sec.
Thank you in advance
What effect after 10 seconds? There's a scale/jitter effect then an over exposure effect with fades to black and there's a blue light streak? You mentioned brush strokes so I think it's the light streak.
For that you can use Beam, or small solids stacked on top of each other with various blurs and blend modes set to Add or Screen and a lens flair, or a half dozen different particle effects, or . . .
Catch a still frame and show us what you're trying to achieve and we can help more.
or ??
Similar Messages
-
I need to know which country imei starts from 01254300
I need to know which country imei starts from 01254300
plzz. help meread this?
http://en.wikipedia.org/wiki/International_Mobile_Equipment_Identity -
In April 3o,2012 and May 9,2012 some purchases of $38.75 and $24.51 were made and they were not made by me because i never spend that much. Thing is that on February 7,2012 my ipod was stolen and i havn´t gotten it back since, i know have a new ipod and have made some purchases but never that much. I need to know who did this !!!!!!
The most immediate thing you need to do is to call your credit card company and report the unauthorized charges. Your card company can contact Apple if they need additional information.
Next, log into your iTunes Store account and see if the purchases are reflected in the Purchase History. If they are, immediately change the password to your iTunes Store account, making sure it's not something easily guessed or looked up. Then go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Whether or not they'll do anything for you I don't know, particularly if you didn't change the password after your iPod was stolen.
If the charges are not reflected in the Purchase History, then it's most likely a fraudulent charge to your credit card directly rather than an unauthorized purchase through your iTunes Store account in which case it will be up to your bank to handle.
Regards. -
my Creative Cloud subscription has expired, and I assigned the monthly payment, but I can not open any progam creative cloud, I need help how to solve this problem
Carlos-
Start by signing out and back in to see if it will see the subscription:
How to sign in and sign out of creative cloud (activate/deactivate)
If the apps are installed fine and close after launch see this link:
CC applications close immediately after launch
If the problem is something different, please let us know the error you see or what is happening on the screen so we can advise you on a solution
Pattie -
Need to know which exit to be used in me21
Hi Guys,
i want to know which user exit to be used in me21 so that
if the PO has a delivery address that is outside the US; then the tax code should be EX and the tax jurisdiction code should be 7777777770.
i had found lots of user exits in me21 but i want to know which one will fullfill my requirement.
i am waiting for ur replys,
regards,
maqsoodby seeing the short description, u need to know which exit is suitable, its just a trial and error method.
the requirement u r telling seems to be like field exit.
u need to take help from basis guy to register first.
then the procedure to create field exit can be seen in below :
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sappoint.com/abap/userexit.pdf -
I need to know which install disk to buy for my mac serial number 17*****ZE4
Need to know which install disk to buy since I lost my original.
<Edited by Host>You have an 24" Early 2008 iMac. It came with Mac OS X 10.5, and you would need the disk set for your specific model. It's possible that if you call Apple Support, they can still sell you a set, but that model of iMac is no longer supported by Apple so Support may not be able to help. If not, then you'll need to look to private sellers or companies that sell obsolete software.
You can also call the online Apple Store and purchase a retail copy of Mac OS X 10.6 Snow Leopard.
Regards. -
Need to know which upgrade to purchase
I'm staggered that Adobe makes it this difficult to even get advice.
I have been using Photoshop CS3 on a MacbookPro. I recently upgraded (was upgraded!) to Mavericks.
Now Photoshop CS3 no longer works (of course).
I need to know which product to purchase as an upgrade that WILL work. I can't find any sales number to call to ask, or any way to chat with sales personnel. I find a forum to be an extraordinarily time-consuming way to ask what is probably the simplest question out there.You have 2 choices:
Join the Creative Cloud (monthly subscription) and get the current release PS CC 2014.
Creative Cloud pricing and membership plans | Adobe Creative Cloud
Or, purchase the older PS CS6 (the last suite Adobe sold outright).
Creative Suite 6
Understand that if you purchase CS6, it will never get the updates that Creative Cloud users get.
Nancy O. -
Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This ProblemLotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.
-
I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?
Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited. -
I need to know what was this B-8GD564814752 2433R Transaction bill to me ba pay pall yestrday?
I need to know what was this B-8GD564814752 2433R Transaction bill to me ba pay pall yestrday?
that is why Iam questioning because I don't know you bill me throught pay pall? you don't put eny description of the objet! any way I did not make any transaction yesterday!!!!!
-
I have a late 2009 iMac. I installed OSX 10.8.4 and want to go back to Snow Leopard. I have a 3TB external HD. Are there any issues I need to know about or tips I need to know before doing this? Thanks.
Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files. -
Need help on which router to buy for my BB 8320
Now i know 8320 is dated but at this point i am not planning to change anytime soon .
So I have a router which is kinda old, it didnt really occur to me since it worked. When i got my bb 8320 i was in a hotel and i could connect through their wireless without any hassle. I could surf, use youtube, name it.
When i got home i couldnt do anything, i spent countless nights trying to figure out waht was wrong then i realized its my router. If only BB said somethign it wont support old routers then i wouldve saved myself hours of self-loathing.
Anyways I also have gone to my friends house, and i could connect to her linksys router without any hassle. i was the one who set her router up and we bought it this year. i didnt do anything special, configuration-wise or w/e.
So NOW i am just going to buy a new router. I really need help!!!!
I was wondering if this one is good:
W311R Wireless-N Broadband Router
W311R integrates the wireless AP, router, four-port switch and firewall in one, and increases over 4 times transmission range of ordinary 802.11g products. Compatible with IEEE802.11n (Draft 2.0) and IEEE802.11g/b standards, it can provide up to 150Mbps stable transmission rate. It is dedicated to SOHOs and students’ dormitory. In addition, URL and MAC address filtering can take it easy for parents and network administrator to manage network life, and QoS bandwidth control over specific computer’s downloading speed is supported as well. Moreover, UPnP and WMM support can smooth your MSN voice better, and the included Setup Wizard on CD-ROM will be easy and fast for non-savvy users to install the device and access to the Internet.
Overview:
* Includes router, wireless access point, four-port switch and firewall in one
* Provides up to 150Mbps uploading and downloading speed
* Supports two WPS (Wi-Fi Protected Setup) encryption methods: PBC and PIN
* Compliant to IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3 and IEEE802.3u standards
* Supports far-distance transmission, 100 meters indoor, 400 meters outdoor (depends on the environments around)
* Supports 64/128-bit WEP encryption, WPA and the latest WPA2 encryption security authentication
* Supports RTS/CTS protocol and data partitioning function
* Provides one 10/100Mbps Auto-Negotiation Ethernet WAN ports for WAN connection
* Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports for LAN connections
* Supports xDSL/Cable MODEM, static and dynamic IP in community networking
* Supports remote/local Web management
* Supports WMM to better smooth your voice and video
* Supports SSID stealth mode and access control based over MAC address (up to 30 entries)
* Supports Auto MDI/MDIX
* Supports wireless Roaming technology and ensures high-efficient wireless connections
* Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n
* Supports UPnP and DDNS
* Supports Firefox 1.0, IE5.5 or above
* Supports SNTP
* Supports virtual server, DMZ host
* Built-in firewall for hacker’s attack prevention
* Supports DHCP server/client
* Supports auto wireless channel selection
* Supports the control over LAN access to Internet
* Provides syslog to record the status of the router
* Supports WDS wireless network extension
* Supports QoS function
Input Voltage Range
AC 110~240V
Output Voltage Range
9V~1000mA
Consumption
20dbm
Operating Temperature
0? ~ 40?
Storage Temperature
-40? ~ 70?
Operating Humidity
10% ~ 90% RH non-condensing
Storage Humidity
5% ~ 90% RH non-condensing
Antenna
One Non-detachable external antenna (5dBi)
Frequency Range
2.4GHz-2.5GHz
EVM
-30dB
Sensitivity
54M:-74dBm@10% PER; 11M:-85dBm@8% PER; 6M:-88dBm@10% PER; 1M:-90dBm@8% PER
Outdoor
400m
Indoor
100m
WLAN?LAN
93Mbps
WLAN?WLAN
93Mbps
Frequency Range
2.4GHz
Gain
5dBi
Nominal Impedance
50
Polarization
Linear; Vertical
Maximum Power
1W
* Vertical Beamwidth 360ºFlip UltraHD.
Shoots mp4 H264 format files. Fits in a shirt pocket and records 2 hrs worth of material to an internal card. Charges from your USB port as you download. If you are just trimming clips, you can use QT Pro without conversion. If you need to edit, convert to ProRes 720p30. Works like a dream.
Just make sure you have it solidly placed when you pull the trigger as there is no image stabilization.
Oh, and it is only $199 US.
x -
NEED HELP WITH SOLARIZING EFFECT!
So I am editing my final film project at the moment on FCP, and I need to know how to make the solarizing video filter do a few specific things. I need to make it look like the effect is SLOWLY CREEPING INTO THE CLIP and not just simply BOOM, THERE! And then on the following clip, I'd like it if my actors remained in regular color, as they were, and for only the BACKGROUND behind them to have the soarized filter.
Does anybody know how to do this at all? It would be a tremendous help to me as right now the effect honestly looks a bit silly! Thanks, I really appreciate it a lot!
Cheers,
LizI need to make it look like the effect is SLOWLY CREEPING INTO THE CLIP< </div>
Create a next of all of your finished sequence. Pull two copies fo the next into a new sequence, on on top of the other (you only need audio from one of them). One copy of your sequence does not have the filter, the other does. Create a wipe or another transition or use a motion track matte to add the effect. Using an animated track matte you can have the solarization effect selectively applied to any location on the screen.
If this is a big part of your finished school project, you may want to have Plan B ready to go. You may not be able to get what you think you want without exploring several special effects design functions that you apparently have not covered in class.
bogiesan -
Need Help with setting up this Filter
Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.
-
Need help identifying what problem this is
Hi
I just want to know if:
Is this a common problem with LCD Monitors?
What is this display issue called?
Is this fixable? If so, how?
I know this is a monitor issue because I've tried many troubleshoots.
Please answer my questions above, I don't prefer replacing my monitor yet. Also, I couldn't take screenshots because the lines or dots don't appear to other users so I used a camera.
Blue lines or dots in some areas. I think they are consistent in bright areas. Captured from my background wallpaper. Pink lines or dots in what I suspect dark areas. Captured from a game (League of Legends)What effect after 10 seconds? There's a scale/jitter effect then an over exposure effect with fades to black and there's a blue light streak? You mentioned brush strokes so I think it's the light streak.
For that you can use Beam, or small solids stacked on top of each other with various blurs and blend modes set to Add or Screen and a lens flair, or a half dozen different particle effects, or . . .
Catch a still frame and show us what you're trying to achieve and we can help more.
or ??
Maybe you are looking for
-
Windows 7 Enterprise to Windows 8.1 upgrade consumer edition
Hi, It might be a silly question but I'd like to know if it's possible to upgrade from a Windows 7 Enterprise computer to a Windows 8.1 consumer license. I mean the regular not the Pro edition. I am currently running W7 Enterprise 64Bit and I bought
-
Implications of adding new key fields to existing table
Hi All, I have searched forum regarding this. But didn't find exact answer. We are planning to add new key fields to existing Ztable. I want to know the implications of this. I have checked the where used list of table and found no impact. Only one p
-
Widget stops working when second widget added
I added a twitter feed widget via adobe widget and it was working. Then I added an image cycle widget and the image cycle widget worked, but the twitter feed widget stopped showing up in the browser. Here's my code: <!DOCTYPE html PUBLIC "-//W3C//DTD
-
Tabular Models and Column Security
We have a tabular model that we need to implement column level security against and we continue to run into brick walls, as anything to do with role based security is centered around row level security (or filtering). Our need is NOT for row level se
-
Report saving as favourite not working
Hi, In web reporting, we are using one variable to read hierarchy and it is active hierarchy. One user during runtime of report changing the hierarchy to some other one and saving it as favourite. Once he is recalling the saved report from the favour