"Need Help" link no longer exists for developer error troubleshooting

I am completing the "Contact Management" tutorial--which is quite well documented, I must say--and have discovered that the old Interakt Collection had links pop up to diagnose possible solutions to error messages. These have been surreptitiously deleted--thanks a lot, Adobe--with no update in the documentation... What a fantastic idea, though, and a wonderful way to pinpoint problems for learning developers (such as myself)... Ah well, too bad...

Incidentally, what has become of this resource? Even in archived form, it could prove to be an invaluable aid...

Similar Messages

HELP! Need help linking Nano to existing Nike+ account

Hope someone can help as I'm going out of my mind. I searched but couldn't find another topic like this.
I had to restore my nano (2nd gen) to its original factory settings in itunes, which erased all songs and data. My Nano is working great now, but it's no longer linked to my Nike Plus account. When I now connect the restored Nano, under the Nike + tab in itunes I cannot check the box to automatically send my workout data to Nike+. The only option is to register. I'm already registered but there isn't an option to link to an existing account?
After the restore on my nano, how do I link it in itunes to my existing Nike+ account that has all my run data stored? Like I said, the only option on Itunes is to register and that's not what I want to do since I already am registered!
I guess this would be the same problem if I bought a new Nano so I'm sure this question has been raised before.
Please help! I need this fixed before my run tomorrow! Thanks folks!
Scott

GFF,
Yes, I checked the link you provided below and couldn't find any topic with a similar problem. I already did my run for the day so won't know until tomorrow if the receiver and sensor gather info but everything appears like it will work just fine. When I plug the receiver in the Nike+ option pops up in the menu and it looks ready to go. It even recognizes the sensor so I think that's okay.
I did email Nike Plus but they haven't answered yet.
When I connect the Nano to itunes, I cannot check or uncheck the box to automatically send the info. The only option is to "create a Nike account." I clicked this and tried to just add my existing account and it wouldn't let me saying it already exists.
There has to be a simple way to do this. Can't imagine you lose everything if you get a new Nano or have to restore one.
Maybe more options will pop up after my run tomorrow morning when I plug in the Nano to itunes with a run to send to Nike+
I'll let you know. Until then, any other suggestions would really be appreciated!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

Vera,
Use View > View Options, and set 'Sort By" to "Manual Order."
Then you will be able to drag-n-drop songs up and down the list.

OTL Error - Hrs - Element link does not exist for the duration of the entry

Hi,
We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
I have re-run the security list generation (we are using static list).
The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
We are using 11.5.10.2
Thankss

Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

~graffiti wrote:
PjonesCET wrote:
I know if you attempt to download and exe file to Mac from a Mac Partition you'll get something like. Cannot not understand file format octet-stream. This means it does not recognize MS execute files.
Not necesarily. I've done it a few times.
PjonesCET wrote:
I'm not sure you can download a PC copy of Acrobat 9 unless you operating from bootcamp or other such application and running the PC partition.
Yes. You can.
I've learned something. New. This must be recently changed. That last time I clicked on a Link I though was a dmg file and turned out it was and exe file my Macs wouldn't allow me to do so. But haven't tried recently everytime and exe file comes up I cancel. I gues I am used to the time everytime a Virus or some other nasty was downloaded it was packaged in and exe file and Macs owuldn't allow it. I suppose with the INtel guts now they can no longer refuse to download.

Need Help to create new screen for RF Sapconsole

Hi Guru's
I'm new on RF (but some years in ABAP) since last week.
I need help to create new screens for RF (SAPLLMOB).
Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
I have to develop 2 new screens with really few time.
And, another subsidiary question :
how SAP can transfert information between the flash gun and the screen i have developped.
Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
It's a new strange world for me today...
Many thanks to everyone who can explain me
Alain

hi,
I am facing this problem as well. Is there any reference to create the new screen?
Hope someone can help! Thanks!
Regards,
Darren

I need help linking Microsoft SDK to My visual studio 2010 sp1 project?

I need help linking Microsoft SDK to My visual studio 2010 sp1 project?
Hi, I'm on windows 8.1 and I'm getting a lot of Direct x sdk errors every time I try to debug or release a project. Please help me I'm lost trying to fix's this, thanks.

Hi programmerblizz,
According to your description, could you please tell me which kind of project you try to debug or release? Is it a c++ project or other?
If it is a c++ project, I suggest you can refer the following thread check your issue in your side.
Reference:
http://stackoverflow.com/questions/26303922/directx-9-cannot-find-the-include-libaries
If no, please tell me more detail message about your issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers, threw programs away, only have Adobe Acrobat X Standard, need a code to unlock program?

Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7.

You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

I need help getting new authorization codes for digital copies

I need help getting new authorization codes for digital copies of movies. Can someone help me out?

There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

Maestro need help also code is 75957252 for bios password reset

maestro need help also code is 75957252 for bios password reset
This question was solved.
View Solution.

Check your other post. I replied there.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

I am having the same problem...did you ever fix it?

I think I need help with driver (software) settings for D110a

I think I need help with driver (software) settings for D110a all-in-one
Product: D110a all-in-one
OS: Windows XP Professional
Error messages: None
Changes before problem appeared: None--new installation
The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
least acceptable, Some would probably say good or very good.
It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
trunk is a round, solid object.
I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
e-mail me at [email protected]

brazzmonkey wrote:
Hi everyone,
I noticed the following message when network starts on my gateway
Warning: This functionality is deprecated.
Please refer to /etc/rc.conf on how to define a single wired
connection, or use a utility such as netcfg.
Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
Currently, my set up is the following (old way):
INTERFACES=(eth0 eth1)
eth0="dhcp"
eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
ROUTES=(!gateway)
eth0 is on DHCP because the IP is dynamically assigned my ISP.
eth1 has a fix IP because it's on the LAN side.
No problem to use DHCP on eth0 with the new settings.
But for eth1, I don't know what I am supposed to write for gateway.
Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
Any guidance appreciated, thanks.
brazzmonkey,
you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
Use, f.e., netcfg:
Comment your old lines.
In /etc/rc.conf insert:
NETWORKS=(Eth0-dhcp Eth1-static)
DAEMONS=(..... !network @net-profiles ....)
In /etc/network.d create 2 files:
First one is named Eth0-dhcp.
Contents:
CONNECTION="ethernet"
DESCRIPTION="Whatever text"
INTERFACE=eth0
HOSTNAME="your hostname"
IP="dhcp"
DHCP_TIMEOUT=15
Second one is named Eth1-static.
Contents:
CONNECTION='ethernet'
DESCRIPTION='whatver'
INTERFACE='eth1'
HOSTNAME='hname'
IP='static'
ADDR='192.168.0.10'
GATEWAY='192.168.0.1' # your gateway IP
DNS=('192.168.0.1') # your DNS server
The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
Hope it helps.
mektub
PS: netcfg must be installed.
Last edited by Mektub (2011-07-20 14:07:05)

Need help reformatting my hard drive for mac only

Help please
Need help reformatting my hard drive for mac only with my toshishba hard drive

What Mac is this please, with what version of OS X?

API error: Element link does not exist for the duration of the entry

I am trying to create an element using the API_PAY_ELEMENT_ENTRY.CREATE_ELEMENT_ENTRY API
While I am able to create many elements for years this way, for one particular non-recurring element I get the following error
ORA-20001: Element link does not exist for the duration of the entry
Cause: The link has been purged or date effectively deleted.
Action: Check the effective start and end dates on the link definitions for this element.
I have checked evertything and the Link is defined far before my element entry starts and with no end date. The assignment I want to attach this element entry is perfectly eligible.
The weirdest is that I am able to create this element entry with the values I want and the dates I want through standard User interface...
Any idea?
Message was edited by:
briard

Here are the parameters I use in my call.
DECLARE
L_EFFECTIVE_START_DATE DATE;
L_EFFECTIVE_END_DATE DATE;
L_ELEMENT_ENTRY_ID NUMBER;
L_OBJECT_VERSION_NUMBER NUMBER;
L_WARNING BOOLEAN;
BEGIN
APPS.PAY_ELEMENT_ENTRY_API.CREATE_ELEMENT_ENTRY(
P_EFFECTIVE_DATE => TO_DATE('01-JUL-2008','DD-MON-YYYY'),
P_BUSINESS_GROUP_ID => 1,
P_ASSIGNMENT_ID => 122147
P_ELEMENT_LINK_ID => 233,
P_ENTRY_TYPE => 'E',
P_INPUT_VALUE_ID1 => 313,
P_ENTRY_VALUE1 => 'T',
P_INPUT_VALUE_ID2 => 314,
P_ENTRY_VALUE2 => '5',
-- out params
P_EFFECTIVE_START_DATE => L_EFFECTIVE_START_DATE,
P_EFFECTIVE_END_DATE => L_EFFECTIVE_END_DATE,
P_ELEMENT_ENTRY_ID => L_ELEMENT_ENTRY_ID,
P_OBJECT_VERSION_NUMBER => L_OBJECT_VERSION_NUMBER,
P_CREATE_WARNING => L_WARNING);
END;
François

Need help to redeem contact code for OS X 7

Need help to redeem contact code for OS X 7

Hello NOREDEEM,
Thanks for using Apple Support Communities.
If you have the purchase code for OS X 10.7 Lion, then you can follow the directions below to redeem it on your Mac.
Mac App Store: Redeem gift cards and download codes
Take care,
Alex H.

"Need Help" link no longer exists for developer error troubleshooting

Similar Messages

Maybe you are looking for