Need help loading photos

Hi all, just got my 30g video for x-mas and want to load photos from "my pictures" to my ipod. I'm sure it's simple as can be, but unfortunately i cannot figure it out. Any help would be terrific. Thanks in advance.

Connect your iPod.
Go to Edit->Preferences
Select the iPod tab. Select the photo tab from within the iPod tab (only appears when iPod is connected). Make your selections and hit ok. You can select your "My Pictures" or pcik only certain folders. Wait a long time (and make sure you have plenty of disk space - I ran out because iTunes made a bunch of files on my hard drive while generating the thumbnails.).
Enjoy!

Similar Messages

Need help putting photos on my iPad

Trying to put scanned photos on my iPad. I have tried iTunes but under devices there is no photos to select. Need help.

Photos doesn't appear on the left-hand sidebar under Devices, it appears on the right-hand side in a similar way as for selecting and syncing music, apps etc
If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

Need help uploading photos

I have been unable to upload photos from iphoto. All I get is the event titles! I need help...

Yes, it's possible to use both, but not that way. That command will make duplicates of all your iphoto images, so you don't want to do that.
For now, you have two choices.
1. Set PSE as your external editor in iphoto ( iphoto>preferences>advanced):
and send the photos from iphoto to PSE. If you set the PSE editor preferences>saving files>on first save to save over the existing file, iphoto will remember you latest edits + the original.
If you do this, be sure to choose the right file as your editor. You want this one, in Applications>Adobe Photoshop Elements 11>Support Files:
Or
2. You can export the photos from iphoto, use File>Open in the Editor, edit and save your changes and then reimport them to iphoto as new images. The advantage of this is that you can change the name and format if you want and you can save as many versions as you like. iPhoto only keeps one version--if you edit again, the new version replaces the one it was keeping.

Need help organizing photos

I need help organizing my photos. Over the years, my Mac has collected photos in many different locations, many different folders, both on the internal and an external hard drive. What I need is the best and easiest software for: 1) searching multiple hard drives to find all photo (and video) files; 2) identifying and removing all duplicates; and 3) putting all photo and video files into a single organized folder in a location that I specify. There are lots of products out there, but I can't seem to be able to figure out which one is the best, and which one will do exactly what I need it to do. Any suggestions from the community?

Import the photos into iPhoto and use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - to find and eliminate duplicates
LN

Need help loading DLL in labVIEW project

I have a DLL that was written in C# that I want to load it to my labVIEW project. I have never done this before, so I need help. I chose Connectivity-Call Library Function Node then loaded my DLL. After, under function name, I typed in the function name from the code. I don't know what to do with other like Parameters.
They don't let me attach dll file
Can someone explain how to set the parameters and etc?

Well, it seems that you really need to learn quite a bit about .NET (ActiveX is very similar!) first.
The constructor node in your code creates an object in your .NET CLR (Common Language Runtime). This object exposes properties and/or methods. Use Property Node(s) and Invoke Node(s) to access these. Usually, you get references to other objects which you can work this.
Remember the golden rule for ActiveX and .NET:
Close all references you created in your LabVIEW code on your own (using Close Reference)!
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

I need help loading a swf file in a flash website

Hi,
I am an interactive design student working on a flash portfiolio and need help. I can't figure out how to load a game I made in flash into my porfolio so that it loads after clicking on a button, becomes playable, then have a button to leave the game and go back to my portfolio. I'm working in Actionscript 2.0 because that's all my teachers will show me and I have minimal actionscript knowledge.
Thanks,
Emily

I thought I got it to work with loadMovie, but it only plays the intro, and then either repeats or exits as soon as the first bit of actionscript starts

I need help finding photos just downloaded to Lightroom...they only show up in "previous downloads" and not in a folder in my pictures

I need help finding phots just downloaded to lightroom...they only show up in "prevoious downloads" and not in a folder in my pictures. what can I do to correct this?

Also, please be aware that Lightroom is not a file browser like your operating system Finder or Explorer is. If the photos are not in the folder you expected them to be in, it is because you (accidentally) imported them into a different folder.

Need help with Photo Stream

I am having issues with Photo Stream and iPhoto when the iPhoto library is stored on a Drobo NAS. When I access the library stored on the NAS I see Photo Stream on the menu and when I access the library I get a message that tells me I need to switch Photo Stream to this Library. I did select to switch Photo Stream over to this NAS library and I did get a big blue button that is suppose to start Photo Stream but when I push it nothing happens.
I have contacted Apple support and they said that this is the way Photo Stream works and recommended that I submit a request to have this feature added at Apple\Feedback, if it is something I would like to have. They said if enough people request this feature they will add it but that Photo Stream does not currently support an iPhoto library stored on a remote NAS or shared network drive.
My question is has anyone found a work around for this? If you would like to have this feature added to Photo Stream can you please submit your request to Apple so they will add it, perhaps a little sooner than later?

I checked today and this issue has been solved with the latest iPhoto update from Apple. I am running iPhoto 9.2.3 on my Snow Leopard Server which is sharing a Drobo NAS. I am also running iPhoto 9.2.3 on my MBP running Lion and I can now open my iPhoto Library and Photostream will work with the library and even automatically create events and move all my Photostream pictures into these events within the Library. I can then close the Library on my MBP and open the same Library from my Snow Leopard server and the new Events are there and I can move them around with no problem. Thank you Apple for this fix. Even though I cannot deal with Photostream directly from the Snow Leopard server this is a very eligant work around.

Need Help Loading SWF in a FLA

I simply want to call a swf into an existing fla. I have
tried everything. When dragging the timeline, you see the swf. When
you preview, it is not there. Background - I have an exisiting fla
that contains the image background for all. I want to set a
transparent carousel menu on top of the background that is in the
fla and leave the existing background and lower objects in place.
The carousel.swf will need to call java and an xml file on the web
server.....all external to the "summed" final. If I could layer
flashed in DW, then the problem would also be solved. Please be
detailed, I am obviously not a developer.

although I'm not certain why you would not just 'place' the
background 'image' on the stage in the fla (probably because you
wish to change it dynamically down the road) - you need to 'load'
the swf, not 'place' it within the other file. you do this with the
MovieClipLoader class.
with the swf that you wish to load in the same directory as
the swf of the carousel file, place something like the following in
the first frame, on a layer called actions, in the actions panel:

Need help loading data from Excel data file to oracle tables

i need to load an Excel spreadsheet to Oracle table.
The spreadsheet contains 20 columns, the first 8 columns contains basic info, but the rest 12 columns contains info like
1stQtr_08, 2ndQtr_08, 3rdQtr_08, 4thQtr_08
1stQtr_09, 2ndQtr_09, 3rdQtr_09, 4thQtr_09
1stQtr_10, 2ndQtr_10, 3rdQtr_10, 4thQtr_10
So what i need to accomplish is:
break that one record(with 20 fields) in Excel to 3 records for each fiscal year in the Oracle table, so each record in the database table will look like
8 basic field + fiscal_year + 1stQtr_08, 2ndQtr_08, 3rdQtr_08, 4thQtr_08
8 basic field + fiscal_year + 1stQtr_09, 2ndQtr_09, 3rdQtr_09, 4thQtr_09
8 basic field + fiscal_year + 1stQtr_10, 2ndQtr_10, 3rdQtr_10, 4thQtr_10
There are about 10000 rows in the data file, so how can i use sqlldr to perform such task? beside sqlldr, any other good suggestions?
thx

External Tables is just an Oracle API for sqlloader. If you going to load this data over and over again, External tables would be a good idea, but if it's a one time thing, sqlldir is simpler, unless you just want to learn how to use External Tables.
I used to run a data warehouse, so I have done, at least similar, to what you are doing in the past.

Need help Loading images with selection on a form field?

So I'm kind of a newb.. I can do basic forms but I need to set up a form field drop down box that will give me the ability to load images correlating to the users choice. I'm at a total loss for where to start, so ANY help would be appreciated. If you know of any good books or tutorials on the subject please share.
Thanks in advance
Sincerely,
Stumped4now

P.S. I think I'm getting a better understanding of OCGs after lots of research today. However I still seem to be missing something
var docOCGs = this.getOCGs();
for (var x=0; x < docOCGs.length; x++)
if(docOCGs[x].name == "Layer1")
docOCGs[x].state = !docOCGs[x].state;

Need help making photo page look clean,Time to show up on Google? Photoshop

Just bought this Mac 2 days ago and am trying to make the switch. I was computer illeterate on my Dell as well but so far this program is pretty neat. I am trying to get my photo page cleaned up. I would like all the photos in a single row across the page with only one photo displayed underneath. I have seen a few demos with that done but I cannot figure it out. Ideally a slideshow would start automatically but I really just want a cleaned up page vs. a blob of photos.
My site is http://www.greasysideup.com
The picture demo is here http://www.apple.com/ilife/iweb/#album - the scuba picture on the far right of the iweb showcase is the look I am going for.
Additionally how long does it take to show up on a google search? I am following one of the listings on here on how to do that. On the google search pages there is a brief description of the page as well, I believe it is the title page. How do I make Google say how cool my site is? if it ever shows up on google?
Last question - is there a program on my Mac similar to photoshop? I want to do some simple 3-d looking text angled slightly as if it is coming out of the screen with my name and the name of my business.
The other thing I want to do is take this picture, make the background black and make the planes orange or red then put those in the background on one of the pages.
/Users/joshwilson/Downloads/Yak50_profile.jpg
(I need to learn to post a jpg in the forums as well I guess!!) The photo is the last one on my website photo page labeled Yak 50_profile. I want to make the background black and the outline orange.
Thanks for all the help. This site is great! I think I'll be glad I made the Mac Switch.
Message was edited by: GreasySideUp
Message was edited by: GreasySideUp

I've done a section on search engines here...
http://www.iwebformusicians.com/SearchEngines/SEO.html
The page about sitemaps is here...
http://www.iwebformusicians.com/SearchEngines/Sitemap.html
There's a link on the above page to a free sitemap generator that will produce the sitemap for you in the correct format.

Need help placing photo image in laptop screen of a video...

I have footage that is both zooming and panning, and need a photo image to fit within the laptop screen space during the duration of the pan/zoom. Should I use "Track Motion" accompanied with key-framing in 2D? Does this make sense? Is there an easier way to achieve this, or is that the way to go?
Here is a rough take of the clip of which I speak. In reality, we will be placing the same image on both the HDTV and the laptop in the shot. Hopefully, this will make what I have said above a little more clear. Hope you can help. Thanks much.

If you have CS4 then I would recommend using Mocha for AE (a planar tracking software from imagineers system that comes bundled with AE CS4). It's basically designed for the kinds of stuff you described. There are some helpfull tutorials on the imagineer systems's website:
http://www.imagineersystems.com/support/mocha-AE/tutorials/

Need help embedding photo gallery swf into main swf...

So I am attempting to create a website in flash and have the
main swf created for that. However, I've also created a photo
gallery in a separate swf which I want to embed into one of the
scenes in the main swf. I tried importing directly to stage, but
quickly realized that the timeline from the photo swf would not get
carried over. Basically, I know that it has to be accomplished
using AS, but don't know what that script would be. Any help would
be appreciated!

OK, well, that wasn't really a tutorial as much as it was
just a huge section of code I couldn't make sense of. Anyways,
instead of loading the gallery externally now I decided to just
make it in the actual main swf. So, basically, in the section of
the main swf reserved for the gallery I created an empty movie
clip, went inside the clip, created layers for script, thumbs and
photos. The photos themselves were in a movieclip of their own.
Each photo has a small fade in accomplished by staggering the
keyframes for each photo with a stop(); action on the last frame of
each photo where it comes to full opacity. The thumbnails are back
in the main movieclip where each button has code telling it to go
to the beginning of each photos transition and play. It is supposed
to play until it hits that stop action, but it won't play at all.
Suggestions?

[OT] Need Help Tweaking Photos in Photoshop

Although I know Photoshop fairly well, I am a novice in this general area of tweaking photos ... and could use some help.
I have some inferior photos that I would like to do my best to fix up in Photoshop CS2. Many of them somehow turned out quite faded ... I am not sure why.
I have posted one of these photos as an example on the Web. I would be interested in finding out the best quick way to tweak these pictures and make them more presentable. Feel free to just take a look or, if you would like, download the photo into Photoshop and let me know the best way to proceed.
Location:
http://www.brainbeast.com/pic/
- I have fooled with :
Image - adjustments - levels ... and moved the left and right arrows to the edge of the data areas and that seems to help ... however I'm not sure what to do with the Middle arrow - etc...
- Also - I fooled around with the exposure adjustment and also the shadow/highlight adjustment ... however from my limited knowledge - they all sort of seem to do the same thing - and I'm not sure which method or combination of techniques is best.
Q: Can someone help give me some suggestions as to how to proceed?
Any help would be greatly appreciated - RevDave

I find that using the Levels control (Command-L) is a little more intuitive than the Curves. I would seem to have problems with dragging the right direction but that's my issue. The Levels has an auto button that will get you very close to what mebs produced. You can then move the sliders to fine tune it.
Both ways will clean up the photo. It's just which way you're more comfortable with. Good luck.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Need help loading photos

Similar Messages

Maybe you are looking for