NEED HELP : MacOSX / Logic pro 8 / M-audio Firewire 410

Hi,
I'm in complete distress right now.
I have a big problem and I really don't know what it is.
I'm a professional musician and I have a kind of buzz on my hardware. Every time i try to record on my logic ...I have a buzz. Please check this link where you can hear what I'm talking about. I putted an explanation and some example on a mp3 player to make you understand better my problem.
http://www.gemi-productions.com/yuli/squizz/index.html
If you have any idea please let me know.
My MAC configuration :
Mac book pro OSX 10.4.11 / 2.4 Ghz intel core duo / 2Go 667 Mhz DDR2
Sound card M-Audio Firewire 410 / Logic Pro 8
I have all the lasted Mac update !
Thx a lot for your help.
Nailian.

Hi,
Back from my "rescue mission" ...
Firstable, to answer the last post, yes I tried on different computers but it was windows PC.
Anyway, I tried ...older drivers (1.8/1.7/1.7.2) ...not working.
I tried to close airport (not bluetooth cause my mouse use it) ...not working.
So I decided to buy and install Leopard ...and it's working great.
In fact, after some research my problem was a frequency problem who came from a disfunction between my card and my mac. But why this problem ...because of apple !!!
Yes It seems the last security update 2008-002 from apple can not be "trusted"
Bring a lot of problem ...as mine.
So maybe I bought leopard for nothing ...but is great too so I'm ok
Thx again for all your ideas.
See u.
N.

Similar Messages

  • Help! Trouble with M-Audio Firewire 410 MIDI Compatability

    I am currently working on an iMac running OSX 10.4.11. I have been unsuccessful in trying to use a Yamaha P-70 keyboard, running through my M-Audio Firewire 410 using the MIDI input to record MIDI sounds in Garageband. I have had great success with this in the past before this version of iLife with the Garageband updates. My computer recognizes I have a MIDI device, and I have changed the proper settings both on the control panel and within Garageband to reading the M-Audio Firewire 410, yet I am not getting any signal from the keyboard as a MIDI instrument and therefore cannot record any sounds. Does anyone have any suggestions, or is this something perhaps someone else has dealt with already? I appreciate your help!

    Very interesting. Couple of questions for you:
    1. Did it only affect MIDI instruments or real instruments as well?
    2. If it stopped working with GB, what did you to fix the problem? Would it possibly work with Logic? I have contemplated purchasing that software.
    3. Do you know of any fixes for the 410?

  • Need help authorizing Logic Pro 7

    Hello everyone,
    I have purchased a version of Logic Pro 7.
    I have the install and content dvd's and XSkey. When I install the software and launch the program it is asking for an activation code which I do not have.....Can someone please help?
    I need to find the answers to how i can get a new code from the XSkey to authorize the program.
    The guy that i purchased from said that this is all i should need.
    I have read the same on several blogs...
    Need info on how to make this work.
    Thanks
    SP

    That means the XSKey never got a final license and that the demo expired. There were only two possible options:
    The XSKey is damaged. You could have used the XSKey Updater http://support.apple.com/kb/TA23387 to check and repair the XSKey, if needed. That said: the XSKey servers http://xskey.apple.com are long gone and so this doesn't work anymore.
    Return the copy and say that it doesn't contain a full license.
    Sorry. I hope you didn't spend a significant amount of money on it (considering that Logic Pro 9 only cost $199)

  • Logic Pro 7 - Audio Track record with Firewire In

    System: Mac Book Pro. Logic 7.2.3 M-Audio Firewire 410. Aggregate device created = Firewire Multichannel (as input) & Built-In Output. (Built-in microphone turned off) Using condensor mike connected to F/W interface
    SYMPTOM: No Audio being recorded to Audio Track. MIDI interfaces OK.
    Any idea how to set Audio track to capture Firewire audio IN? (The set-up works properly with Garage Band)

    Have you checked the Audio Input in the Channel Strip? What is it set to? Have you armed the Record button? ... say a bit more about your set up

  • TS1717 This article is vague and unhelpful. My iTunes needs help from a pro. I have over 120,000 songs -- NO movies, TV, radio, or books... I have other programs which efficiently run things which are not audio-based. So why can I not get iTunes working w

    This article is vague and unhelpful. My iTunes needs help from a pro.
    I have over 120,000 songs -- NO movies, TV, radio, or books...
    I have other programs which efficiently run things which are not audio-based.
    So why can I not get iTunes working well?? It now takes at least 10 secs for any operation to be completed!
    That is just plain evil. But I am sure I could do something to help.
    All the music is on an 2T external drive.

    TS1717 as noted in the thread title...
    Brigancook, is the library database on the external or just the media? iTunes reevaluates smart playlists and rewrites its database after every action on the library. I've found this can make a library half that size, with a lot of smart playlists, quite sluggish. That said I'm aware part of my problem is aging hardware. Having the database on the internal drive may improve performance if it is currently on the external.
    I'd expect to see an exponential relationship between size and response time which may explain what you see. Cutting down on the number of smart playlists might help. If we're really lucky the long awaited iTunes 11 might have streamlined some of the background processes as well as cleaning up the front end.
    tt2

  • Rookie needs help recording DJ set through M-audio Firewire 410

    Ok.... ive been reading through the forums and I still can't find help...
    Im running GB 3 that came with my Macbook I bought about 4 months ago.
    I am a DJ and I trying to record a DJ set/demo.
    What I use to DJ is Pioneer cdj-800 x2 and a Pioneer DJM400 using Rane Serato Scratch through my Mac.
    I recently bought an M-Audio Firewire 410.
    I installed all necessary drivers from m-audio's website (i bought it on ebay so it did not come with the install cd).
    I connect the Maudio into the Mac as instructed and set all my inputs/outputs in prefs to the m audio.
    The record out of my mixer is via rca so i bought an rca to 1/4" cable. The rca going into my mixer and the 1/4" is going into the first "mic/inst" on the interface.
    I created a real instrument track on a new project in GB and set the input to channel 1 (mono).
    I play a track..... no sound. nothing at all. i tried the inputs in the back of the firwire and played with the gains. still nothing. i am getting a little frustrated here as you can imagine.
    I would really appreciate if someone could walk me through this or at least point me in the right direction.
    Thanks a ton in advance.
    Message was edited by: defman13

    Perhaps you may need to reinstall the driver again from the M-audio website. The newest drivers don't work well but if you're running the newest OSX 10.4.10 then you have no choice but to use the newest drivers. When installing the new driver, do not have the 410 hooked up to the computer. After it is installed, shut down the computer. Hook up the 410, then turn the computer on, make sure teh 410 is power button is on as well. Once you're computer is up and running, open up the m-audio mixer application that comes with the driver. on the top right-hand corner is a reset button. Click that and a there will be a popup asking if you want to reset, say reset. Next open up system preferences and check the sound. Select the 410 for input and output. You have to also do this again in garagebands prefs. Test your audio out by playing a song through itunes or something. Hope it works.

  • Help! My Macbook Pro will not recognise my M-Audio Firewire 410 interface

    Hi
    I'm new here and fairly new to Macs having only recently bought a Macbook Pro.
    My plan is to use the Macbook primarily for music but I can't get my M-Audio Firewire 410 audio interface working.
    I have installed the latest Intel driver but when I plug the interface in, the Mac does not recognize it at all. I have tested the port/cables etc, and can successfully play music from an external firewire HDD chained through the Firewire 410.
    How is it possible that the Mac doesn't even know the interface is there (when I click on the M-Audio software icon I get this message "No M-Audio Firewire device was found connected to this Mac") yet I can play music chained through the device?
    I have tried both with, and without, the external power supply connected to the Firewire 410 and also tested it on my PC where it works as usual. And I've tried deleting and reinstalling the driver....(I thought this was PC only territory!)
    Any ideas? I really want to get back into music and my past (bad) experiences with PCs drove me to the Mac...
    Many thanks in advance
    Macbook Pro 2.16 Core 2 Duo   Mac OS X (10.4.8)  

    Try v1.8.2 instead of v1.7.2 of M-Audio's driver setup.

  • HELP!! No sound while recording thrugh M-Audio firewire 410

    I am using Logic express 7 with an M-Audio firewire 410. I have my guitar plugged into the mbox and Logic is picking up the signal from my guitar, but I cannot monitor the sound while recording OR hear anything else at all. When I unplug the mbox, however, I can hear everything that i just recorded along with everything else in the song fine. I just need some help figuring out how to monitor the sound, PLEASE!!!!

    Logic always uses the same audio interface for input AND output, so I suppose your problem is that you do not have any speakers connected to you M-Audio interface. Try adding a pair of speakers to it. If there's still no sound, go to Logic's audio settings and see if "software monitoring" is active or not.
    Björn

  • Help with Powering m-audio firewire 410

    Hi to All
    I just got a Mac book Pro, and I own an m-audio firewire 410 interface. The Mac works wonderfully and I´m extremely happy with it and the 410 together.
    Does Anyone know if there is a way to power the interface with the AC adapter, whithout powering it through the 6 pin Firewire port when using batteries ?
    To My understanding, the 6 pin ports always can power devices.
    Thanks for Your Help, and sorry of any English glitch

    I have a MacBook Pro and a M-Audio Firewire 410. As we speak, I am running a six pin firewire cable to the Firewire 410 as well connecting it to the supplied AC power adapter. Nevertheless, I use it primarily with my PowerMac G5. When connected to the G5, I have both the 6 to 6 pin firewire connector and the supplied AC power power adapter connected and sending power to the unit. Nowhere in the manual does it say that you cannot connect the AC power adapter to the FW 410 while a six pin (powered) firewire cable is in use. It does say that the AC adapter is included to power the unit when a computer with four pin firewire ports (the kind that don't supply power) is connected to the FW 410. As bus power from a firewire port is often the victim of RFI from the components in the computer, I was advised by M-Audio tech support to utilize external power whenever feasible to increase the SN ratio on the device. So basically they told me to connect both at the same time. I assume that the FW 410 knows when it is receiving power from the AC adapter and knows to not utilize the power from the firewire bus simultaneously. If you are really worried, I suggest you call M-Audio tech support and let them tell you what I just did. One final thought: I have used my FW 410 with two power sources (firewire and DC in) for the two years since I've had the unit. It doesn't work as well as it used to...now that the drivers have improved, it works much better a than it used to. I hope this answers your question.
    2GHz DP PowerMac G5 (generation uno) / MBP 15" 2.16 GHz   Mac OS X (10.4.6)   4 GB RAM & 6800 Ultra Nvidia Graphics / 2 GB RAM
      Mac OS X (10.4.6)  

  • Now i have tryied everything i need help getting premier pro trial real help pls!

    now i have tryied everything i need help getting premier pro trial real help pls!

    Hi,
    Are you facing issues installing Premiere pro trial?
    Please mention your operating system.
    Error(If you're getting any)
    Thank you,
    Mohd Naseem

  • Need help installing Adobe Pro 9 Product code [removed by moderator] to my new PC tower.

    Need help installing Adobe Pro 9 to my new PC.

    Hi albertc40027908,
    You might need to deactivate Acrobat 9 from your old machine.
    Then, install the software from a CD (if you have) and activate with the same serial number.
    If you don't have a CD, then you might install Acrobat 9 pro from the below mentioned link:
    Download Acrobat products | 9, 8
    Hope this helps.
    Regards,
    Anubha

  • Need help with premiere pro cs6 having performance issues please help

    need help with premiere pro cs6 having performance issues please help

    Welcome to the forum.
    First thing that I would do would be to look at this Adobe KB Article to see if it helps.
    Next, I would try the tips in this ARTICLE.
    If that does not help, a Repair Install would definitely be in order.
    Good luck,
    Hunt

  • HT4812 I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

    I recently fixed my computer and need to reinstall logic pro 9 but I can't find the booklet with my serial number, is there any other way I can get the serial number for logic pro 9 (box)?

    If you still have the receipt or other proof of purchase, you can ask Apple to send you the serial. Otherwise, bad luck mate.. Good news is, you can now buy Logic Pro 9 from App Store for just 199 USD

  • Soundtrack Pro + M Audio FireWire Solo = Confusing

    Hardware in use:
    -Mac Pro
    -M-Audio FireWire Solo
    Software:
    Soundtrack Pro (latest version)
    I could save a lot of backstory if the person reading this is already familiar with M-Audio FireWire Solo. It's an external Firewire interface for audio recording. It has two inputs on the front. One XLR (for my microphone) and one 1/4 inch audio in (for the guitar).
    My goal is to record on two tracks simultaneously in STP. Right now I am able to do that in Garage Band using the current equipment, but STP gives me more control over the sound, so I want to switch over.
    And now, for the problem. When I try recording using STP, there's an error message. The message pops up as soon as I set the "Input" on the "Recording Tab" (this tab is located in the upper right corner on default layout of STP). When I specify that I want, say, "Track 1" to receive audio from "Input Analog 1" (that's what I have channel one linked to), I get this error: "An Unexpected Problem. NSInternalInconsistencyException *-[NSCFArray replaceObjectAtIndex:withObject:]:mutating method sent to immutable object."
    I then have an option to quit or click ok. When I click ok, it still doesn't get the signal from that individual input. Basically it's only letting me use multichannel, which puts both guitar and audio on the same track. This is bad because I can't edit them individually. Sorry for all the gibberish I just wanted to put as much specific information as possible.

    Alright, you're very close to fully grasping my situation, and I'm really glad you posted the picture. Basically, just under where it says "input" I click & drag it to the M-Audio Multitrack option. But what it should have is "M-audio input 1" and "M-audio input 2" in that same pull-down menu. I tried to bypass this problem by going into preferences and setting the little "1" button for input 1, and "2" for input 2. So far so good. But as soon as I click the 1 or the 2, it gives me the error message listed above.

  • M-Audio Firewire 410 soundcard problem on Windows on new iMac

    I've had this problem since I got the new iMac. When running Windows natively, with all Boot Camp 2.0 (same with the older Boot Camp) drivers installed and the latest drivers for my M-Audio Firewire 410 for Windows XP Pro, I haven't been able to use the sound card at all. Everything installs perfectly, the control panel works, but the hardware won't respond to any sound playback. I'm not sure if it's the Boot Camp drivers for my iMac or if it's my interface. It worked fine through Boot Camp with my MacBook Pro, but not the new Aluminum iMac. Using it with Ableton Live 6/7 fails. Playing it from iTunes fails. Everything fails. My interface is basically rendered useless on Windows. I believe it's an iMac + Boot Camp problem, not the interface. Audio program forums didn't help, so I cam here. Hope someone can help. Thanks!

    from M-audio...
    M-Audio does not support Boot Camp on Intel based Macs at this time.
    The problem is that there is no BIOS on Mac Intel systems and getting devices to work on some XP systems requires BIOS/OS tweaks. Boot Camp works around the need for BIOS; Windows does not. Windows installations are not always consistent and the fact it works on one Intel Mac does not mean it will work on another.
    Attempting to install any M-Audio device or drivers in Boot Camp is done solely at the user’s own risk.
    Here is a website that has many troubleshooting tips that can help get devices to work on XP and MAY work for Boot Camp; however this is all done at the users own risk.
    http://www.pcaudiolabs.com/setuptips1.asp?cat=setu
    For M-Audio FireWire devices:
    Switching from Mac to PC the FireWire device may not always load the firmware properly. To get the PC firmware to load you may have to boot into XP then shut down, disconnect, reconnect and reboot. Switching from PC to Mac automatically loads the correct firmware.
    If this workaround does not fix your issue, you will have to run the device solely on Mac OS or on Windows hardware.

Maybe you are looking for