Need Help - Mail Application Folder Issues

I have 2 mail accounts. One is an exchange account, another is a standard hosted mail service with IMAP interface.
Both are setup as IMAP (Exchange option didn't show all folders, so I had to use IMAP for Exchange.)
The mail application just plain doesn't work for any folder management, on either account.
If I move messages, it's not moved on the server. If I send a message, it isn't stored in the Sent folders.
Most of the time, it doesn't put the mail anywhere. When I send mail messages, it creates a Sent items folder under the drafts folder.
The IMAP prefixes are correct, and I can see all folders. The Folder behaviors are set to the proper server side folders.
I've restored, rebooted, etc.
Any other suggestions?

There are no synchronize options on the PC mail apps, they are live clients. Outlook for work, OWA for my personal account.
This problem is happening with two accounts. One personal exchange, and one externally hosted (not exchange, actually webmail.us) for our company.
I am the Senior Software Architect/Engineer for the IT department and I have spoken with webmail.us as well as our infrastructure group and am very familiar with Exchange.
All issues and troubleshooting steps so far point to the need to troubleshoot the client application itself on the iPhone, especially since other IMAP clients have no issue using the exact same settings.
As a matter of fact, everything works 100% fine from the OSX mail client using IMAP for the exact same accounts with the exact same settings on my MacBook ultimate.
It makes a copy of a moved message in the proper folder, and leaves the original in the inbox. This is how the iPhone client should work, right?
Message was edited by: bitslap47

Similar Messages

Hi, i need help, okay..my issues is that since the lastest update for the ipod touch, my music lihow can i get the itunes main music playlist to appear the same on my ipod touch?

Hi, i need help, okay..my issue is that since the lastest update for the ipod touch, my music list is all over the place....my question is how can i get the itunes main music playlist to appear the same on my ipod touch?

Hi Lawrence,
Thanks for your prompt response, however I have first seen it now. I have placed an active SIM card in the iPhone turned it off and on. It now says SIM locked, please write access code. The problem is I don't remember the password. When I connect it to iTunes it tell me that I have to write the password before it can be used with iTunes...... Do you have any good ideas? I see you are from the NYC area.... used to work there back in the early 90´ Those were good days..... What a City

I purchased Creative Cloud through the Employee Purchase program. Had to reimage system. Need help reinstalling application. I have "redemption" code, but get error saying it has already been redeemed. Please advise.

I purchased Creative Cloud through the Employee Purchase program. Had to reimage system. Need help reinstalling application. I have "redemption" code, but get error saying it has already been redeemed. Can you please advise how I go about getting my software reinstalled? If I was given the serial number when I redeemed, I don't have any record of it.
Thank you,
Starla

Hi Starla Mehaffey,
I would suggest you to sign in with your Adobe ID during installation and your product will automatically recognize your membership details.
Refer this Link for any further assistance:- Redemption Code Help
Hope that helps,
Regards,
Rahul Tyagi

I am unable to use Iboost app, when i try to use it, I get an error "iBoost App is damaged" and reinstall from app store. I get the same error even after installing a fresh copy. Need help to resovle this issue.

“iBoostUp.app” is damaged and can’t be opened. Delete “iBoostUp.app” and download it again from the App Store.
Because of the above error, i am not able to use iboostup application. I have even tried to reinstall from app store, but the issue still continues.
Need help.

Perhaps the damaged file is an auxiliary file outside the app bundle and stored elsewhere on your Mac. Try deleting the app and all it files with an app for that purpose. Afree one is AppCleaner;
http://www.freemacsoft.net/appcleaner/

Need Help! Application Deployment wont work

hi, i need help, currently having windows 2008r2 with sccm 2012r2.
The deployment for application for some e.g. adobe reader, firefox is working.
but when we try to deploy a application it is not installing. we tried manually run it from ccmcache with the same command line in the sccm and it works.
The application is pushed to the cache folder. But it just wont get installed. Any1 can help? Really urgent need to solve this.
Thanks
I tried the parameter with setup.exe /s /f1xxx.iss
tried with -s -fixxx.iss also same thing...
but when i manually run the command it work....

As Torsten mentioned, check AppEnforce.log from the %windir%\ccm\Logs -folder on the client that doesn't get the software installed.
What are you using as your detection method for the application that fails? Have you tried using
psexec -s cmd (included in the Sysinternals Suite, Google/Bing it) to open a command prompt with SYSTEM account and run the installation command from there? You should always test your application installation commands with SYSTEM account before implementing
them to ConfigMgr, this way you'll make sure that the command works.

Help, Moved applications folder accidently

Hi All,
while playing with my new wacom bamboo tablet I've accidently moved my entire application folder (over 17Gb) onto my C drive (not in users folder)
Now I cannot move it back to my home folder.
when trying to move it back I get the error message "this folder is in use by lion and cannot be moved"
I've tried copying them back to my home folder but lion is still using the original files in the new C drive location.
I would imagine all the permissions and update data is with the original files.
I'm struggling to understand how I could have moved them so easily (without me realising I've done it, or altering any system properties/permissions at all), yet I cannot move them back. - surely this safeguard should work both ways?
Any suggestions would be appreciated>
Regards,

I have no idea what you are referring to with a "C" drive - is that an external hard drive? The proper file path for the Applications folder is HD (Macintosh Hard Drive) > Applications. They need to reside there for Software Update to find them. Here is a screenshot of mine:
I see no Applications folder in my User folder:
Maybe you could send screenshots of where yours is located - that might be helpful to try to figure things out.

Please Help - Mail Application Erased

I am trying to move all of my info from Entourage to Mac Mail because I just bought an iphone. Somehow my Mac mail application has been erased. I don't have an original system boot disk. How can I replace the mail application? I am running 10.4.11 on a Powerbook G4 laptop. Thanks!

Hi Jay, and a warm welcome to the forums!
You need those install discs, or another Mac with it. Downloads are only updates.
Custom installs in Mac OS X 10.4...
http://docs.info.apple.com/article.html?artnum=301229
"Here's a list of all the custom installation options available with Optional Installs.mpkg:
* Applications
o Address Book 4.0
o iCal 2.0
o iChat 3.0
o iTunes 4.7.1
o Mail 2.0
o Oxford Dictionaries
o Safari 2.0
o X11"

I'm a Noob, and need help solving a backup issue.

I previously had an Alienware PC with a 1TB harddrive. I backed up to the cloud using Carbonite.
I decided to get a new laptop and got a MacBook Pro with Retina. It only has 128GB harddrive. My plan was to use a 2TB external harddrive and back up both using Carbonite. Well, turns out Carbonite only does external harddrive backup with PC's not Macs. So, I need help.
I have way more files than can fit on my laptop that need to be accessed and backed up on a regular basis, so it would seem time machine isn't the solution.
What do you do? or would you recommend? What is the best way for someone like me who wants continual access to and backup of a large amount of data? Are there any good cloud based solutions you would recommend?
I appreciate your help!

CMCSK
Bulletproof backups:
The MOST important part in that link was the titled portion marked: Make backups for your backups
My list for the original poster:
Never consider any computer a data storage device, rather a data creation ,sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake.
Never backup your data exclusively upon magnetic hard drives or flash storage, nor consider same since magnetic storage degrades over time even under ideal conditions.
Store important data on multiple servers on multiple continents.
Burn important data onto multiple copies of archival DVDs and store same in cool dark fireproof safes, hidden places, secret places, multiple places.
Don’t burn data onto junk DVD’s purchased from consumer level electronics stores. These are not archival long life DVD’s nor reliable, nor trustworthy
When data can be made to be everywhere, then there is nowhere it can be erased or destroyed.
Most importantly know that 2 copies of your data is 1, and 1 is none, and 1000 copies stored in one place or building, is also the same as none when a fire occurs.
Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and thou shalt keep a cloned and updated hard drive handy at all times to return to immediate productivity and avoid program and parameter reinstallation and tweaking.
When your data is decentralized, it becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances.

Need help specifying PDF folder location in Javascript

We currently have a bit of Javascript that opens a PDF file when the user clicks the Open PDF button. The script is:
//External link button function                     border=0></a> <script
var ButtonID="PDF1";
var View="User Guides\\WiMAX User Guide.pdf";
document.writeln('<OBJECT CLASSID="clsid:ADB880A6-D8FF-11CF-9377-00AA003B7A11" ID="'+ButtonID+'" TYPE="application/x-oleobject">')
   document.writeln('<PARAM NAME="Command" VALUE="Shortcut">')
   document.writeln('<PARAM NAME="Font" VALUE="MS Sans Serif,10,0,,">')
   document.writeln('<PARAM NAME="Item1" VALUE=",'+GetCurrDir()+View+'">')
document.writeln('</OBJECT>')
The User Guides folder is within the Help folder where the CHM file is saved (so I have Help (where CHM files are stored)\User Guides (where PDFs are stored).
One of the PDFs is now installed outside the Help folder in a folder that is at the same level as the Help folder. I can't seem to get my updated link to work. Is there a limitation on that requires that the PDF be within the same folder or beneath the folder where the CHM is saved? Is there a way to get this to work?
Thanks.

Hi,
See http://www.cybertext.com.au/tips_HTML_chm_external.htm, it was written for AuthorIt but it should work for Robo as well. I seems you just need to get the path right, but you may have to amend your script (specifically the function GetCurrDir() ).
Greet,
Willam
This e-mail is personal. For our full disclaimer, please visit www.centric.eu/disclaimer.

Need help with an innerjoin issue

Hello;
I am writting a small app for my web site and have run into
an issue with an innerjoin. Let me explain what the function is for
this so maybe you can understand what I am doing.
There are 2 pages to this. Page 1, is a category selection
page. It loads all the categories on the page with a link that
passes a category ID to page 2. Page 2, then allows you to view all
the projects that are associated to the specific category. There is
a numbered navigation on this page, kind of like google, 1 2 3 4
More> Next>
Now what I am trying to do it create a select function that
allows you to choose another category to look through on page 2 so
you don't have to go back to page 1 and select another category
there.
Right now, I have the innerjoin working well with page 1
going to page 2 and the numbered nav, it is doing what it is
supposed to. BUT the select function is working off the where
clause and not working independantly from what the numbered nav and
body is supposed to be doing. There is also a spot I added to this
page that kind of works like the select function, it puts the name
of the category your viewing on the page.
What is happening with the select function and this name
function is lets say there are 5 project records tied to the
category you selected, then the select function gets 5 names of the
same category in it and so does the category name function.
(Follow this?)
Let me post the code for page 1 and page 2. also will add
what the tables are in the db.
DB tables:
Table1: Categories
Name (this is the actual category name), MYFile(the file that
give an image of the category), Description(a description of this
category), CategoryID (this is added to the projects table for each
project that is connected to each category)
Table 2: Projects
ProjectID (this is the ID of the projects), Name (this is the
name of the project) Body (thi sis the description and picture of
the project), CategoryID (this is the id of what category the
project falls under, also assigned to tproject from the categories
table)
There is a lot of code that goes in this, so I am going to
post the code that is pertinent to this question, 90% of it is
working at this time, just not the select function and category
name on page 2.
Page1 Code:
<CFQUERY name="GetRecord"
datasource="#APPLICATION.dataSource#">
select Name, MYFile, Description, CategoryID
FROM Categories
</CFQUERY>
<head>
</head>
<body>
<cfloop query="GetRecord" startRow="#URL.startRow#"
endRow="#endRow#"><cfoutput>
<img src="../img/cat/#MYFile#" width="50" height="50">
<a
href="portfolio-detail.cfm?CategoryID=#CategoryID#">#Name#</a>
#Description#
</cfoutput></cfloop>

Page2 code:
<CFQUERY name="getProjects"
datasource="#APPLICATION.dataSource#">
SELECT Projects.ProjectID, Projects.Name, Projects.Body,
Projects.CategoryID,
Categories.CategoryID AS catID, Categories.Name AS cat_name
FROM Projects
INNER JOIN Categories
ON Categories.CategoryID = Projects.CategoryID
WHERE Projects.CategoryID = #categoryID#
ORDER BY ProjectID
</CFQUERY>
<cfif getProjects.recordCount is 0>
No projects in this category.
<cfabort>
</cfif>
<head>

<script language="Javascript">
function changeRecord(){
document.category.submit();
</script>
</head>
<body>

<cfoutput
query="getProjects">#cat_name#</cfoutput>
<form Name="category" method="post"
Action="portfolio-detail.cfm?CategoryID=true">
<select name="CategoryID" size="1"
onChange="category.submit();">
<option value=""> --Select a Category--
</option>
<CFOUTPUT query= "getProjects">
<option value="#CategoryID#">#cat_name#</option>
</CFOUTPUT>
</select>
</form>

<cfoutput query="GetProjects" startRow="#startRow#"
maxRows="#maxRows#">
#Name#
#Body#
</cfoutput>

<cfmodule
template="../CFdocs/PageNav.cfm"
totalItems="#numRows#"
numPerPage="#maxRows#"
startRow="#startRow#"
url="#cgi.script_name#?categoryID=#categoryID#&startRow=#startRow#">
The main part that is not working properly is the select, and
category name. How to I get those to work independantly from my
where clause? (I need the where clause for the numbered nav and
cycling through the projects tied to the category you called up
from page 1.
Can someone help me tweek my code from this point? I am
stumped, I looked at the cf docs and I can't find a solution. I am
using CF 8.
Any help would be appreciated. Thank you!
CFmonger

I fixed a lot of this since I posted it this morning. Now all
that isn't working properly is the select, it isn't passing the
proper variable to make the query work.
This is what I have now:
Page 2:
<CFQUERY name="getProjects"
datasource="#APPLICATION.dataSource#">
SELECT Projects.ProjectID, Projects.Name, Projects.Body,
Projects.CategoryID,
Categories.CategoryID AS catID, Categories.Name AS cat_name
FROM Projects
INNER JOIN Categories
ON Categories.CategoryID = Projects.CategoryID
WHERE Projects.CategoryID = #categoryID#
ORDER BY ProjectID
</CFQUERY>

<cfif getProjects.recordCount is 0>
No projects in this category.
<cfabort>
</cfif>

<CFQUERY name="cata"
datasource="#APPLICATION.dataSource#">
select Name, MYFile, Description, CategoryID
FROM Categories
</CFQUERY>
<head>
<script language="Javascript">
function changeRecord(){
document.category.submit();
</script>
</head>
<body>

<cfoutput query="getProjects"
maxrows="1">#cat_name#</cfoutput>

<form Name="category" method="post"
Action="portfolio-detail.cfm?CategoryID=#CategoryID#">
<select name="CategoryID" size="1"
onChange="category.submit();">
<option value=""> --Select a Category--
</option>
<CFOUTPUT query= "cata">
<option value="#CategoryID#">#Name#</option>
</CFOUTPUT>
</select>
</form>

The error I get when using the select is this:
Error Executing Database Query.
[Macromedia][SequeLink JDBC Driver][ODBC
Socket][Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator) in query expression 'Projects.CategoryID ='.
The error occurred in C:\Websites\folio\portfolio-detail.cfm:
line 12
10 : INNER JOIN Categories
11 : ON Categories.CategoryID = Projects.CategoryID
12 : WHERE Projects.CategoryID = #categoryID#
13 : ORDER BY ProjectID
14 : </CFQUERY>
I also tried doing it this way:
<form Name="category" method="post"
Action="portfolio-detail.cfm?CategoryID=true"
This way didn't work at all, it only made the numbered nav on
the page cycle through all the projects in all the categories.
What do I need to change to pass the proper variable from the
select nav to the innerjoin query and my where statement?

Need help on resolving the issue with adobe output server - error MSG256 & MSG 210 not in .ini file

Hi,
I am using adobe output designer 5.5 for designing the label template and using the Adobe output server for printing process.
In the Jfmerge.ini we given the condition "DiscardUnknownFields=Yes" for ignoring the unwanted fields in the .dat file.
During the process, I faced some issue with the output server in printing the labels.
When the .dat file is placed in the Data folder of adobe, the label is not getting printed in the printer.
The file is move to the error folder and an error file is getting generated which contains the error message as given below:
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [256]** Message Msg256 not in .ini file **
090826 02:59:02 D:\Program Files\Adobe\Central\Bin\jfmerge: [210]** Message Msg210 not in .ini file **
2009/08/26 02:59:02 D:\Program Files\Adobe\Central\Bin\jfserver.exe: [314]Agent exit message: [210]** Message Msg210 not in .ini file **
The output server is a new installtion and I verified the Jfmerge.ini file. It contains the message details of Msg256 and Msg210.
I also verified the license and it is a valid licence.
Kindly help me out in solving this issue.
Thanks
Senthil

I assume this is too late to help you, but other might need a hint. I had the same problem, and found some possible causes that I posted on http://codeznips.blogspot.com/2010/02/adobe-output-server-message-msg210-not.html.
It is quite likely that you are missing some double quotes around the path specifying the ini file (-aii), if its installed under "Program Files".
Hope this helps anyone....
Vegard

Need Help With Disk Space Issue

I am trying to free up some disk space on my MacBook Pro. Here is what I have in terms of usage of personal files:
Music: 24.7 gb
Pictures: 9.92 gb
Documents: .379 gb
Applications: 9.25 gb
This totals 44.249 gb
My capacity is listed as 111.47 gb. The problem is that I am showing only 11.96 gb available. I don't understand why there is so much gab between what is listed above and the capacity. I realize the System files, Application Support, etc. use a fair amount, but it still seems like I should have more space. I have run Onyx to clear caches, optimize, etc., and that has helped, but only marginally. Are there large files somewhere I am not aware of? I have an iDisk, but I have iDisk Synching off, so there should not be a copy of it on my computer, unless tere is an old oe lurking somewhere. Thanks a lot for any suggestions.

I'll give a very plain answer :P
My Movies folder has a 10 gb size, my Library folder has 5.83 gb, my root Library has 10.89 gb, my System folder has 4.2 gb. I believe there is much more than the basic folders that eats your HDD away.
I don't know if my folders size are normal, but I do know that adding only your basic folders won't give you the real amount of disk used. In my case I have 20.92 gb of space. I would also look the size of the Downloads folder and the Mail folder (in your home/Library/Mail I have 3.5 GB in one account only!)
Hope this helps!
One last thing, not so long ago I saw a post about someone who found a file that was huge, the file was because he let the computer working overnight testing if it ran correctly by letting chess computer vs computer play all night. The game created an enormous file (I believe it was the nbook.db file in username/Library/Application Support/Chess/)
OR... use what Matt Clifton recommends jajaja... seems like a better idea :P
Message was edited by: Ehych

Just Switched To Mac's and Need Help With A Few Issues!

Hi All,
I finally did it and switched to a Mac!! Never thought it would happen as I always felt guilty about the cost but after 5 laptops crashing on me - well, I just could not take it anymore! I managed to get a fairly good deal on a 15" Macbook Pro - 2.2/120GB version. I still don't know much about the mac way but am trying to learn so any help would be appreciated!
1). Is there any kind of video tutorial (preferably free!) that I can use that will help me learn the Ma OS X? I have Tiger 10.4.11 on my MBP (Did you hear that - MY MBP!!!)
2). AOL Assured me that they fully support Mac before I purchased (only 5 times!) but after I had bought it - they then told me that they do not! I got the AOL disk for Mac but it kind of ***** - features are missing etc. Does anyone in the UK run their Mac's with AOL and does it run as per normal? Any advice with AOL & Mac?
3). AOL also told me - hey, no probs - of course you can transfer all your old emails, favourites folders, personal filing cabinet from a PC to a Mac - but then, after I bought it - the so called dedicated Mac Experts at AOL tell me that simply is not possible - What advice can anyone give me who has switched from PC to Mac with AOL and who needed to transfer all their stuff over? AOL tells you totally different things depending on who you talk to and even from what their web page state! I am really fed up with them!
4). If I am ever successful in getting all my many years worth of data from AOL on a PC to a Mac, I am really intent of changing ISP's - what are the best ones for Mac that offer good Mac support, good deals and no charges for telephone support?
5). I was initially happy with Tiger as again, AOL assured me they supported it but not Leopard (even their website says so) and as I stupidly thought that it must be true (we are talking AOL here!). Now I know that they don't support anything Mac, I am contemplating moving to Leopard - I am a little cautious as I heard there were/are many bugs and unhappy leopard experiences - have the majority of these been solved yet and is it advisable to change to Leopard or should I wait until an updated version comes out?
6). My MBP was originally bought in the US but is registered to my name in the UK. it has 6 months Apple warranty left and I wish to buy Applecare. Apple says it 'recommends' buying Applecare in the country at which the item is registered (not bought, as I understand it). Does that mean, if I buy Applecare in the USA, Apple UK will still accept it and service my MBP as they would do any other or will I have to have the hassle of sending the thing to the USA if it needs attention? Applecare USA T&C's state only for the 50 States & Canada and Applecare UK state only for the UK & EU. Both however state international servicing?! I am a bit confused on this one. I travel a lot and need to know, that any Applecare I buy will not then be limited to just the places they state in the T&C's. As It reads to me, Applecare purchased in the USA/Canada will not cover the UK/Europe/ROTW and vice versa. Is this true or am I missing something or just plain thick?
5). I really wish to upgrade the 120GB HDD. My understanding is that it must be done by either Apple (who charge really silly money) or if correct, at an "Authorized Apple Service Provider" who of course will be much cheaper. If true, does this mean at ANY authorized apple service provider on the planet or just ones in which the item is registered? If I do the upgrade with a service provider, will Apple then also service the new HDD if something goes wrong as per normal anywhere in the world or will they then say, sorry, will not service the new HDD and you have to go back to the place where you had it installed, even though it was one of their authorized service centers? (that would really suck)!
6). The spelling and dictionary (and a few other things) are set to US English - how can I set to UK English? I have tried but to no avail so far.
7) What and how should I set the Firewall settings so I will not get attacks by any form of malware? (I do not know much about this area and what the implications mean)!
Well, that's it so far - please bear my ignorance, I am so new to Mac's and hope this to be one of the smarter decisions I have made in life! Already I have strange sensation that I never had with all those years of Microsoft & PC's - I kinda feel reassured, safe, that if I have problems, they will get sorted, My life will now be easier and not having to worry so much about crashes, viruses, trojans etc, gives me a sense of liberation and contentment almost - very strange feeling but a **** good one! (if only the women in my life were like that)!
Thank You All From A PC to Mac Switcher (and NO! I do not feel guilty or scared anymore)!
SuaveBhav!

I can help you with your questions about AppleCare, and can also reassure you that both the macbook pro and Leopard will be worth your investment and the time you are putting into figuring out how to get your data across. I switched from windows when I bought my macbook a year and a half ago and would not use any other system now. The other day I completed the transition by erasing parallels and Windows from my system entirely.
As for AppleCare, you can get warranty care anywhere in the world, no matter where you buy your AppleCare. Mine was bought and is registered in the US, I live in Slovakia, and have had it serviced several times in Austria and Slovakia under the warranty without any problems at all. There are differences, however, in exactly what the warranty covers from place to place, in accordance with the law in each place that AppleCare is issued. Even though I live in the EU, my agreement with Apple is an American one, and the American guarantees hold. If EU law would demand that Apple fix more things, for instance, than American law does, I could not get those things repaired under my agreement, and vice versa.
Basically, though, I understand my agreement with AppleCare to be that they will fix all problems/damage that are not my fault free of charge for two years after my initial one-year warranty runs out, and that is good enough for me.

Need help creating a folder action for creating folders based on filenames.

I want to create a folder action that will monitor a folder and every time a file is added to the folder it will create a directory using the filename (minus the extension) and move the file the that directory

on run {input, parameters} -- create folders from file names and move
set output to {} -- this will be a list of the moved files
repeat with anItem in the input -- step through each item in the input
    set {theContainer, theName, theExtension} to (getTheNames from anItem)
    try
      set destination to (makeNewFolder for theName at theContainer)
      tell application "Finder"
        move anItem to destination
        set the end of the output to the result as alias -- success
      end tell
    on error errorMessage -- duplicate name, permissions, etc
      log errorMessage
      # handle errors if desired - just skip for now
    end try
end repeat
return the output -- pass on the results to following actions
end run
to getTheNames from someItem -- get a container, name, and extension from a file item
tell application "System Events" to tell disk item (someItem as text)
    set theContainer to the path of the container
    set {theName, theExtension} to {name, name extension}
end tell
if theExtension is not "" then
    set theName to text 1 thru -((count theExtension) + 2) of theName -- just the name part
    set theExtension to "." & theExtension
end if
return {theContainer, theName, theExtension}
end getTheNames
to makeNewFolder for theChild at theParent -- make a new child folder at the parent location if it doesn't already exist
set theParent to theParent as text
if theParent begins with "/" then set theParent to theParent as POSIX file as text
try
    return (theParent & theChild) as alias
on error errorMessage -- no folder
    log errorMessage
    tell application "Finder" to make new folder at theParent with properties {name:theChild}
    return the result as alias
end try
end makeNewFolder
This script almost does what I need except for the fact that it screws up on files with periods in them
for example
1.2.3.4.txt
will create the directorys 1, 2, 3, and 4 instead of 1.2.3.4

I need help with a mapping issue.

We have a number of websites setup so that they are all under the default website in IIS 7. We use ISAPI/ReWrite/3 to process and take it to the correct page to view. Unfortunately this does not work so well with CFAJAX or CFFILEUPLOAD. Can anyone help?
Example:
Local Directory: D:\sites\website1\index.cfm or D:\sites\website2\index.cfm
URL: http://website1.preview.domain.com/ would show a different website than http://website2.preview.domain.com/
ISAPI ReWrite code:
RewriteCond %{HTTP:Host} ^(?:.*\.)?website1\.preview\.domain\.com|^(?:.*\.)?website1\.new\.preview\.domain\.com|^( ?:.*\.)?website1\.office\.preview\.domain\.com$
RewriteRule (.*) /website1$1 [NC,L]
and the same with website2, only it has website 2 instead of website1.
However, when I use CFFileUpload it creates the parameter as: 'http://website1.preview.domain.com/website1/upload/process.cfm'
I have tried to replace the code when processing the template and the page content, but it does not replace it. It must happen last, even after I do a <cfsavecontent>
I need it to show up as http://website1.preview.domain.com/upload/process.cfm
Can anyone help me with either an idea to use in the ISAPI/ReWrite or some other change I can make?

The issue comes down to the fact that in the Coldfusion Administrator I set the Settings > Default ScriptSrc Directory : http://10.4.3.80/CFIDE/scripts/, because http://website1.preview.domain.com/cfide/scripts does not exist.
This works for cfchart, but when I look at the source for any flash stuff, it still puts just "/CFIDE/...", which is trying to pull from http://website1.preview.domain.com/CFIDE/..., which doesn't exist, and it shows http://website1.preview.domain.com/website1/upload/process.cfm (which does not exist) instead of http://website1.preview.domain.com/upload/process.cfm like it should. Everything else works on the website, all coldfusion stuff (although, I do convert some of the links and things in my page so that they work properly). However, I can't find a place to replace links when I use a cffileupload, it puts that in very last, so my links are messed up.
The nicest thing would be a setting that I could set the cffileupload to know what the path is. If that is not available, then I need to write a ISAPI/ReWrite line to redirect it.

Need Help - Mail Application Folder Issues

Similar Messages

Maybe you are looking for