NEED HELP...mainly with re-setting up my router

This is really complicated (I think) so bare with me, please.
I have a Wireless router, WRT546, Geek Squad had to set it up for me (unfortunately, this tells you my level of wireless knowledge). All was fine until:
There was an interruption in my phone service...mind you...DSL and wireless were fine at the time.
AT&T fixed the phone problem (crossed wire at station) then NO DSL/NO Wireless icon in taskbar.
I called and their tech had me do start, run, cmd, ipconfig, something like /release and /renew. ??? She set up a temporary connection for me. Still no wireless or icon.
Next morning, my icon was there! ??? It said I had a connection so I unplugged the DSL cable and reconnected it to the router.
As of now, I DO have wireless but have to connect thru the temp connection she gave me. Connection runs slower and there are only 3 green lights on the router.
AT&T say they 'CAN'T' help me.
I don't know what to do to go back to my old configurations....So there are 4 green lights on router and so I don't have to manually connect to the internet.
Please help. Is there any way I can do this myself? Please give step-by-step directions and talk as if you were talking to a real 'dummie'. (I'm not really) I want to make sure I still have my secure connection, too.
Thank you so much!
Annie~

If you have a username and password from AT&T, you're probably a PPPoE. Just access the Web-Interface of the router (http://192.168.1.1) and set your Internet Connection Type to PPPoE then input your username and password.
Message Edited by okurah on 07-02-2006 04:02 PM

Similar Messages

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

Need Help/Advice with Photo Web Gallery coming from SQL Database

This is my first attempt at a database driven website. I assume what I am trying to accomplish should be fairly easy for more experienced but I am stuck at this point.
First, let me explain what I am trying to accomplish.
I want to create a thumbnail photo gallery displayed in columns and rows. I want to be able to hover over or click on the thumbnail image and have a lightbox script display the image over the thumb page. I am developing locally right now with intent to upload to the hosting site upon completion.
I am developing with ASP vbScript pages. I have an SQL database where the paths to the image thumbnails and pictures are stored in a table. On the gallery page, I have created a div tag to hold my image recordset. Within this div, I have inserted 3 absolute positioned divs to hold the pictureID, the pictureName and the image inserted as a datasource. I then inserted the information from the bindings panel of my recordset. Last, I used a horizontal looper extension from Tom Muck to get the thumbnails to display in columns and rows. Everything works up to this point just fine.
Now, I want to be able to hover or click on a thumnail image and have it displayed in a lightbox. I downloaded and used a javascript called Lightbox 2 which contains 3 javascript files and a css stylesheet. I inserted the files into the head tag like instructed to but could not get things to work properly. Here is where I need help. Currently, I am clicking on the thumbImage binding within the image Div and creating a link holder. I am then binding the larger pictureImage to it with the a.href selected in the bind to. I am then adding the command to call the lightbox javascript. Now, when I test my page, my thumbnail images do not show up (my alt text does in its place) but the links are in place and you can click on the alt text and it will return the correct larger image, but not in the lightbox, just in a new window with no styles.
Am I going about this correctly? Can you use lightbox scripts with data-driven galleries? Does anybody have any suggestions of what I may be doing wrong or missing? Are there better ways to go about accomplishing this?
Any help would be appreciated as this dynamic data thing has my head spinning. Although I know a database is needed to simplify the update and maintenance of the photos while allowing them to be searchable by keywords and tags also set up in the database.
Thanks

As I explained, I am developing locally a the moment. I will see about getting the databased moved up to the hosting server and then provide a link for an example.
In the mean time, can you or anyone else explain a way that you would go about displaying an image thumbnail photo gallery laid out in rows / columns, with any lighbox script that would overlay the larger image over the existing page instead of opening a new browser window?
I don't have to use the method I tried to describe.
In all of the lightbox examples I have looked at thus far, they give instructions on how to append that javascript to a single static image or a group of static images, not images from a datasource. That is where I am getting confused.
Don't know if this will help or not but please see code below:
Javascript and CSS positioned in head tag

<link href="CSS/lightbox.css" rel="stylesheet" type="text/css" />
<script src="Scripts/protype.js" type="text/javascript"></script>
<script src="Scripts/scriptaculous.js?load=effects,builder" type="text/javascript"></script>
<script src="Scripts/lightbox.js" type="text/javascript"></script>

Calling for javascript in the galleryimage div when hovering over thumbnail image
    
    <div id="gallery">
      <p>
        
      </p>
      <table width="400" border="0" align="center" id="galleryNav2">
        <tr>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_moveFirst%>">First</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
            <a href="<%=MM_movePrev%>">Previous</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
            <a href="<%=MM_moveNext%>">Next</a>
          <% End If ' end Not MM_atTotal %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
            <a href="<%=MM_moveLast%>">Last</a>
          <% End If ' end Not MM_atTotal %></td>
        </tr>
      </table>
      <p> </p>
      <table align="center" id="HorzLooper">
        <%
startrw = 0
endrw = HLooper1__index
numberColumns = 5
numrows = 5
while((numrows <> 0) AND (Not rs_ssfGallery.EOF))
startrw = endrw + 1
endrw = endrw + numberColumns
%>
        <tr align="center" valign="top">
          <%
While ((startrw <= endrw) AND (Not rs_ssfGallery.EOF))
%>
          <td><div id="galleryImage">
            <div id="galleryThumb"><a href="images/pic/<%=(rs_ssfGallery.Fields.Item("picture_url").Value)%>"rel="lightbox"><img src="images/thumb/<%=(rs_ssfGallery.Fields.Item("thumb_url").Value)%>" alt="<%=(rs_ssfGallery.Fields.Item("alt_url").Value)%>" /></a></div>
            <div id="galleryImageID"><%=(rs_ssfGallery.Fields.Item("picture_ID").Value)%></div>
            <div id="galleryImageFamily"><%=(rs_ssfGallery.Fields.Item("family").Value)%></div>
          </div></td>
          <%
startrw = startrw + 1
rs_ssfGallery.MoveNext()
Wend
%>
        </tr>
        <%
numrows=numrows-1
Wend
%>
      </table>
      <p> </p>
      <table width="400" border="0" align="center" id="galleryNav">
        <tr>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_moveFirst%>">First</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If MM_offset <> 0 Then %>
              <a href="<%=MM_movePrev%>">Previous</a>
          <% End If ' end MM_offset <> 0 %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
              <a href="<%=MM_moveNext%>">Next</a>
          <% End If ' end Not MM_atTotal %></td>
          <td width="100" align="center"><% If Not MM_atTotal Then %>
              <a href="<%=MM_moveLast%>">Last</a>
          <% End If ' end Not MM_atTotal %></td>
        </tr>
      </table>

    </div>
    
Thanks for any help or suggestions.

Need Help Please with Ipod 20G

Long story short....I had my Ipod 4G and computer stolen several month ago on a business trip(have police report). A friend of mine recently purchased a new Video Ipod and gave me his old 20G...pretty nice of him! I am about to have iTunes loaded on to my new computer. Here are my questions I need help with please.
1. Will I need to setup a new iTunes account or can I use my old one?
2. Will I have to reset my newly acquired Ipod before I can place my music on it? I did back up about 80% of the songs from my old Ipod. Or will I be able to keep the 1500 songs my friend placed on it?
3. Or would it be easier for me to give him back his, cough up the $300 dollars for a new one and start all over?
Can't think of anything else I might need to know. If there is something I am missing and you could help fill in the blanks for me I would truly appreciate the help.
Thanks so much!!
20G Windows 2000
20G Windows 2000

1. No. You can use your old one.
2. Will I have to reset my newly acquired Ipod before I can place my music on it? No, but iTunes may automatically do this, I will explain.
I did back up about 80% of the songs from my old Ipod. Or will I be able to keep the 1500 songs my friend placed on it?
Sorry, but it would not be legal to keep the 1500 songs on this iPod that were your friend's songs, assuming that he's still using/listening to them on another computer.
3. No, I think it would be worth it to keep going, and use the 20GB iPod on your computer. It's not many hoops to jump through, and you should be up and syncing in no time.
Overall, it's fairly easy, and I would suggest that you keep going with this iPod.
My note from question #2:
If you connect an iPod that hasn't been attatched to your computer before, iTunes will most likely display [to the effect of] this message when you connect the iPod for the first time:
"The songs on the iPod "~~" are linked to another iTunes library. Would you like to replace the content of the iPod with this current iTunes library?"
Be sure to click on "NO" when you recieve this message.
Then, click on your iPod's name in the left panel of iTunes.
Click on the "Music" tab.
Deselect "Sync Music" if it is already set to this option.
This means that your iPod is on manual managing now, instead of iTunes automatically transferring songs to your iPod, or deleting them, which is not what you want at this time.
Now, if you have any songs on the iPod that you need to keep (i.e., if you have some of your songs on this iPod)you have a few options to transfer your iPod songs to your computer.
Method 1 - Manually transfer your iPod songs to iTunes using MacMuse's post. See it here -> iPod songs to computer (MacMuse post)
Method 2 - Add your iPod's folder into the iTunes library (via iTunes). Read this post here -> Using iTunes settings to transfer iPod songs to iTunes
Method 3 - Use a third-party program to get the transferring done. For a Windows computer, CopyPod should work good. Also, you can try out YamiPod
I hope that info helps you.
-Kylene

Need help please with ipod mini

Hi,I had my ipod mini sent into service as the pasue button was bust and I now have a totally new ipod mini send out and Im trying to install it on the pC and it doesnt let me,need help pls

You may need to format the iPod for use with Windows.
Try this instead of using the supplied installation CD.
Download the iPod Updater, install this to your computer, restart the computer, run the Updater, then connect your iPod when prompted (not before), then follow the set up procedure.
If this is what you are having problems with, then post back with what happens and any error messages you see.

I need help printing with HP laserjet 2200 and OS 10.6

I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

Hey jeo1951,
If you haven't already, try running through the recommended steps in the following article:
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
It should help you set up your printer.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Need help please with a recent line repair

to cut a very long story i lost my phone line completely 8 days ago i reported it to my ISP and after 5 days i got it back... now they had to replace the cable running from the telegraph pole to my house for some reason thats where the fault was i thought great well done... couldnt wait to get home and get back on the net .... but to my horror it was so slow taking about 1-2 mins for a page to open and its still pritty poor now takes about 30 secs to 1 minute for a web page to open...been intouch with my ISP im having no joy telling me its all fine nothing wrong i done tests and this and that with them and they seem happy with my connection and speed ...but im telling them that before the repair i was getting between 2.8 and 3.2 MB now im lucky to be getting 1 MB ...one guy even said he couldnt understand why im not happy with the service ...now there telling my its my profile through the line has been changed and ill have to wait for 10 days and checking and testing and doing things over and over again and segesting its my computer and set up ect ...
i have been at this for a week now what can i do ??? please someone help is it the new line or is it my ISP ??
but i keep telling them it was all fine before and theres nothing wrong with my set up or my computer because the lap top is the same with the Ethernet cable plugged in so they both cant be the problem ..i have had them both checked at a cost of £65 with a computer tech guy at the shop he said they are clean and healthy systems !

Hi Tony,
There is a peice of equipment within the exchange which 'optimises' the speed of the broadband based on what the line is capable of. When you have had the recent fault on the line it is likely this equipment picked up the fact that the line wasnt capable of the speeds you were getting and has 'restricted' the speed to give you a stable connection.
The equipment is there to try and offer you a stable connection for your Broadband (better to have a slowwer speed all the time than a super fast speed for 5 minutes of the day).
Unfortunalty this can be 'confused' when you have a fault on the line and reduce your speed to compensate for the bad line. It should automatically 'optomise' the speed over a 10 day period and the problem should sort it self out.
You can request your ISP to check this and make sure your line is set up corrcetly after the recent fault, but to be honest it can easier to wait the 10 days (as it is likely the people you speak to are not fully aware of this part of the line/Broadband or willing to help)
It is also possible that the repair has had a negative affect on what the line can suppport (this can happen but unlikely to decrease your speed by something which you would notice) and the only soultion for this is to speak to your isp (if they are happy with the speed you are now getting you might not have much luck).
It sounds like your ISP aren'y very helpful and have 'fobbed you off' for the ten days with out just telling you why, if it was me at this point I would consider an alternative ISP.
Hope that atleast explains why they told you to wait ten days. :-)

Need help urgently with OS X and Windows 7

I need help urgently.
I installed Windows 7 on my macbook pro with OS X Lion. After installing Windows7, I accidently converted the basic volumes to dynamic volumes and now i can't even boot to OS X.
Please help me how to recover my OS X Lion. If I have to delete Windows and bootcamp partitions, it is OK.
I just want to get back my OS X bootable.
Thanks

thihaoo wrote:
Sorry
I can't even see the OS X partition when I hold down the "Option" key.
I could see OS X and Windows partitions if I hold down Option key before changing the partitions to Dynamic partitions from Basic in Windows 7.
Now can't see OS X partiton and only see Winodws partition but when I tried to boot onto Windows7 , I got BSOD and macbook pro restart.
Please help
The usual reason for the OSX partition to be invisible under these circumstances is that it has been trashed by Windows.
Do you have a backup?

Need help ASAP with photoshop elements 11

Please I need help its photoshop elements 11 but I can't put up the pic I need help with could someone help me out by using Facebook, Amanda Jayne Clarke I have a pic of a little girl n a horse
Please i need help ASAP

well you can find many tutorials about how to change background in Photoshop Elements. It ranges all the way from using magic extractor to making a selection using lasso and magnetic lasso tools. But I really prefer using a mask for it. Here is how I would change the background of image A and use Image B as the background.
Open image B in photoshop elements editor- expert mode.
go to file->place and choose the image A to place over image B
go to layers panel by choosing Window-> layers from menu bar. Right click the layer A choose simplify layer.
with layer A selected, choose layer>layer mask> reveal All from menu bar. It would create a layer mask on the layer A.
Select the mark layer of layer A, choose the brush tool and change foreground color to black. Paint all over the are you want to remove from the layer A. if you make an error, change the color white to get your image area back. it is a good practice to use lower opacity(~60) while using layer mark as it gives you more control over with how much opacity you want to remove the background
Happy Editing

Need help dealing with nested audio in Premiere Pro CC 7.2.2

Hi, so previously I have been working with nested multicam video and nested audio together (one video track, and one audio track).
However, I am hitting some issues with the nested audio workflow, and am hoping someone could help me iron out my issues.
1. Once I've completed my edit, how do I efficiently flatten my nested edits so I have all of my original audio back? (For mixing purposes)
2. Audio nesting sometimes seems glitchy. When making new nests, sometimes I will only get the topmost audio track in my nest, and I'm not sure what's causing that to happen.
I REALLY need helping getting my workflow together, as it's at a bit of a stand still right now. I think I'm going to switch to unnested audio to avoid issues, but still need to flatten my existing edits to do that as well.
Many thanks!

This bug is NOT FULLY FIXED. I'm on a tight deadline so i'm not looking very hard online to see if i'm alone - so please forgive me for just posting here...
I'm using CC7.2.1 it's 1/21... very grateful that match frame FINALLY works on merged clips, but, again, this insert/overwrite bug is only PARTIALLY FIXED.
Insert/overwrite with merged clips on 3-point edit now works, but ONLY when cutting in BOTH merged video+audio... if you're just trying to cut in the audio from a merged clip using a 3-point/4-point edit via hotkey, it's a no-go.
I, for example, needed to re-cut in audio under some video with effects on it. So, I unpatched the video source completely and patched source audio tracks 1-4 to the appropriate sequence tracks. Upon hitting insert or overwrite multiple times, nothing responds. The only way to cut anything in from the source (merged clip) was to patch the source video back into the timeline on an unused video track, then cut ALL the tracks from the source in, I then had to delete the video track re-link the now free audio to the original video. Not a big deal, but annoying enough & waste of precious time on tight deadline.
So, yeah, I have a workaround but is still not appropriate to have a core function not work properly. Especially when I'm working with a very complicated timeline.
That said, thanks for keeping on top of our gripes, Mark.

I need help badly with my ibook and palm pilot

Good day. I recently fixed my ibook and my palm to sync with each other. I configured my palm to sync with entourage. I then realized that it would be much better that if I sync my palm pilot with the palm desktop. Gow do I now reverse this? How do i cancel entourage to sync with my pal pilot. please advise. need help badly on this. thanks... i just like to feep my files organized and i find it difficult using entourage...my palm pilot is a palm TX...

I also have a Palm handheld. I use iCal and Address Book more than Entourage. This is what I did:
At first, I tried to adapt to Palm Desktop. I didn't like it, so I looked for the *iSync Conduit*. I found it and installed it. Then, I ignored the Palm desktop software (except the HotSync utility) and have used iSync with iCal and Address Book since.
I know that doesn't answer the question about switching from Entourage, but Desktop isn't that great either. iSync is what I recommend.
-NA

Hello everbody - i need help please with forms

hi
i am new in forms
and i have a project to do
i learn a lot and read oracle books about forms but in the many time it didnot help alot when i try to build and write scripts or procedure or triggers.
i would like to ask a little help
if anyone can help me with links or a web site that i can download form FMB file so i could run them and learn from its scripts_ and
how to build form in the best way
some of my problem are:
- how to call a reports from a form with a button
- how to work with date, hoe to calc the hours between two dates
- i have built a query and i need to find the number of the rows (and the summary with count didnot work coz all the items aren't numbers
thanks alot
hope to get some information

Did you take a look at this?
regards

Need help for the security setting

We are preparing the demo environment with ADF Security turn on with Http Basic Authentication.
Everything works fine but for a command that is send to one of our proxy servlet (context path /BIProxy), we got a pop up dialog that asks you to login to weblogic container.
Anyone have any suggestion regarding what extra security configuration that I need to config to access to context path/servlet that is not default Faces servlet.
The following is what we have in jazn-data.xml for region:
<permission>
<class>oracle.adf.share.security.authorization.RegionPermission</class>
<name>testsecurity.pageDefs.untitled1PageDef</name>
<actions>view</actions>
</permission>

Hi, we find more informaiton.
We got two 401 errors which causes the login popup.
o. For the 1st 401 error (expected), the http header is set to: WWW-Authenticate: Basic realm="jazn.com" so we enter the correct user credential, the dialog goes away.
o. For the 2nd 401 error, the http header is set to: WWW-Authenticate: Basic realm="WebLogic Server" so we get "Authentication Required" dialog ask for WLS login.
For the 2nd 401 error, we are pointing to /Sales-BaseSalesSalesHomePageUi-context-root/BIProxy?cid=BIPresentationServer&RedirectURL=res/b_mozilla/common/obips.ImportMeFirst.js from Referer URL: /Sales-BaseSalesSalesHomePageUi-context-root/faces/zbsSalesHomePage?_adf.ctrl-state=x5a1n5x2d_11
So my quesiton is that do we need to add some security setting in jazn-data.xml or someother files to specify security setting for /BIProxy?
Thanks

Need help fast with a buying decision - Leadtek 6800 GT

Hi there, I have the opportunity to swap my Club 3D 6800 GT for a Leadtek 6800 GT. The reasons I would do this would be the cooling and the games bundle.
I just wanted to know if anyone knows how the cooling is on this particular card and if it would be better than the reference design?
My other concern is that it has a huge copper heatsink on the back of the card, this would sit directly under the CPU HSF. There really would only be a few millimeters between them and due to the position of the socket on this board, the heat sink fins go up vertically. Would the heat from the card's copper heat sink rise up into the CPU HSF grooves and raise the temperature of the CPU?
Thanks for any help
I kind of need help fast as someone said they were gonna buy my other card of ebay today, there's still time to stop them if this is gonna be a bad idea

i would definately take the leadtek one over the club3d card, the cards themselves are all based on refrence designs just different cooling solutions and bundles
and the cooler on the leadtek is a lot better, and it isnt more noisy then the club3d one at all
it has better cooling, and they seem to be the ones which are the most available, and they overclock very well due to the better cooling

Need Help Please with Flash Professional - No Cursor Change on Buttons/Links in Mac OS

Hi Folks, I am relatively new to Flash Professional but I recently built a very nice flash website with very little problems. I noticed after I uploaded my site to my server, that my mouse cursor did not change from an arrow to a finger on any of my buttons. It did change on the hyperlinks, but not on the buttons. Everything still worked fine but there was no indication to the user that an object was in fact an interactive button. I found this code: button1.buttonMode = true; button1.useHandCursor = true; and inserted it for all my buttons and that seemed to fix everything, I tested the site on firefox, ie, and safari. I am using a PC with windows 7. When I went to check the website on a Mac powerbook, the cursor did not change on any of the buttons and it does not change on any of my hyperlinks either. I have searched all over trying to find a solution and have had no luck. Can anyone please help me with this problem or point me in the right direction? Any advice would be very much appreciated. Thanks so much!!!

Thank you so much for replying! I did in fact let flash professional create the HTML page for the site and have not altered it at all. Would you have any other suggestions as to why it's not displaying my links/buttons on a Mac? I checked out the browsers Firefox, ie, and safari on my pc, but looking thru safari on the Mac, the cursor does not change on any of my links or buttons. Thanks again so much for the reply, nice to hear from a human instead of reading thousands of posts! Very much appreciated!!!!!

NEED HELP...mainly with re-setting up my router

Similar Messages

Maybe you are looking for