Need help!!! multi-tracks audio to quicktime via compressor

I have a timeline in FinalCut Pro with 10 audio tracks. I want to do an uncompressed QuickTime and keep the 10 audio tracks seperated. How do I do that?

In FCP, click anywhere on the timeline and type Command + 0 {zero} to open the Sequence Settings. Once they are open, click on the Audio Outputs Tab.
Choose the number of outputs you want, and choose if they are Stereo Pairs or not. Click OK. You will get a warning that your audio device does not support ten tracks, click OK to dismiss it.
Next, assign the tracks on the timeline to the correct output track. Control-click on the space above the lock symbol, and the track assignment drop down will appear. This instance shows the tracks being Stereo Pairs.
Then export your Quicktime. If you want to change the video to uncompressed, you can export it with using File > Export > Using Quicktime Conversion. . . and set the video to uncompressed.
Once you have exported the file, a quick way to check all the audio tracks are correct is to import that file you just created back into FCP, and open it in the viewer, you will see all the tabs for the attached audio tracks.
Be sure to go back and normal the audio settings in your sequence when you are done exporting.
MtD

Similar Messages

Will Soundtrack Pro allow me to master multi-track audio CD?

Please help! I have been looking for the past 4 days for a multi-track audio editing software that will allow me to burn multiple tracks to a CD. Here's what I'm trying to do: I have a 45 minute message and I want to fade a song in at the beginning, and another song fading out at the end. Then I want to place markers every 10 minutes, split into separate tracks, and burn the whole thing to CD from within that software (possibly I can fudge on this last one by exporting each individual track to iTunes, then making a playlist, but if Soundtrack Pro or some other program can do it all, then that is what I prefer!)
I tried Audacity, and it was close to what I wanted, but when I exported into iTunes the last 20 seconds of every song dropped audio! I have also tried the following and these are the errors/difficulties I encountered:
• Amadeus II : No multi-track mixing capability
• Cacophony: kept crashing, multiple error messages
• Jasmine: unique tape-style interface, but again, no multi-track export
• Sound Studio 3: good interface, easy marking, but no sound after export
• Snd Sampler: only one sound can be open at a time
• Deck LE: wouldn't even open one of my audio files!
So now my attention is on Soundtrack Pro and Logic Pro. Both of these seem like they will have what I need, but I'm going to have to fork over a pretty penny. Which is better and will either do multi-track mixing to CD?
Thank you so much to anyone who will read through my whole ordeal and help me out with their musical expertise and sound audio advice!
Sincerely,
Paul

Hello,
I thank you both for the help you've given, and I have obtained STP and really enjoy using it, but I am still disappointed that it will not allow me to master multiple tracks. For instance in Audacity, there is the export multiple command that splits one long song up according to the markers that you placed and then exports them as several different files. In STP, this same process is amazingly difficult, you have to take the razor tool, cut each section, drag it down to another track, then put a stop song marker after the cut section, then select each track and "export selected". (Do you know of an easier way?) Now for a $1200 dollar program that is just a little bit ridiculous, why cannot Apple just have a command to export by markers? Where can I go to request this feature be implemented?
Here's an example of what I am looking for, with features such as Redbook CD mastering (but this software is too buggy)
http://www.xowave.com/
Sincerely,
Paul

Multicam editing with multi-track audio?

Does anyone know how to do multicam editing with multi-track audio? Apparently, the multicam editor can only see Audio Track #1 in the Source Sequence. I tried mixing my original audio tracks #1, #2, and #3 (submixes) to the master audio track in the Source Sequence and if I listen to the new Multicam Sequence (the nested Source Sequence) all 3 original audio tracks are there (combined), but when I go to do the multicam edit in the multicam monitor window, I"m back to just Audio Track #1 of the Source Sequence and audio tracks #2 and #3 are missing ??? Thanks for your help!

I have run the gambit of different techniques. The one that is most efficient is listed in Colin Brougham's response number 9
There's a far easier way to do this: after you sync your angles, hold down Alt/Opt and select or lasso just the video portions of the clips, and nest those. The audio stays put, but the video moves into the nest, and you can then enable Multicam on the nested sequence.
One of the best things about this is that it circumvents Premiere Pro's totally BS "Render Required Files" nonsense.
I must admit the ALT lasso tip was one of the best features I have seen. Like a revelation when I discovered it some months ago while watching a tutorial about something not related. As far as the "Rendering required files" That was kicking my but for a while doing multicam editing. If you do edit both audio and video in multicam you might find the "Rendering required files" issue. Basically the problem stems from having a lot of cuts to process at the same time both audio and video. 1080P is a huge amount of data when you multiply it by four cameras plus multiple audio cuts and effects ,(audio gain, Deessing etc.) So Pre-rendering the audio by clicking in the main sync timeline and then at the top Click Sequence/Render Audio.This takes care of the issue when you are cutting multiple tracks at once. It is a good practice to work from a main sync sequence and then copy that to a new sequence preserving the main sequence as unchanged. I found the solution is to "render audio" only in the master sync sequence this will then pass through to all subsequent copies that are made "downstream" allowing you to easily clean up anything. If you make a mistake you can always start from the main sync sequence and not lose too much time. Takes a little bit of time to render but once that is done you can cut all tracks video and audio like butter. I have been doing a lot of 1080p multicam editing over this past year and had quite learning curve. Most of the work I do is multicam editing by choice it is much faster for me to edit this way because I am used to working in live events where we need to look at all shots at the same time make a "best choice" and keep rolling. Have fun with it!

Multi track audio support on Apple TV

There appears to be a problem with Apple TV supporting multiple audio tracks. It looks like it has been a desired feature since Apple TV launched and even recently stated as working with the 2.3.1 update.
I'm a new owner of an Apple TV, I'm a little disappointed that the update didn't really add this support (support for multiple audio tracks is stated in the 2.3.1 update description and on the product description here: http://www.apple.com/appletv/whatson/movies.html).
I'm able to be patient since the product is still new to me, but it would be nice to hear some followup or statement on what exactly is going on with this feature (I know, "good luck", but I would think some response from apple would be in order only because they claim it's supported). I've looked around in the store and can't find any content that has extra audio tracks available and any video I create myself doesn't have support either.
So, is this a bug, by design, or did I just get duped into buying a product on false promises.
If anyone finds content in the store that has multiple audio tracks available and working, can you post it here?

Yah, I took note of that. That's really why I created this thread, in hopes that as soon as something with an alternate track is made available that someone would be so kind as to post it here.
But given all the problems everyone has with trying to get a video with multi track audio to work on apple tv, I'm not expecting one until at least another point release (or two or three).
Personally I don't think we've seen one because it simply doesn't work yet (and I want so badly to be proven wrong).

Export ISO info with multi track audio

Hi, Need help with the exporting of multi channel file. I have one video track & 32 audio tracks. Apart from the original rest are translation tracks so I want to find a way to be able to add ISO information for each track so that information is saved within the file while exporting.
Exporting it in XDCAM HD 4.2.2.
Can someone kindly help?
Many Thanks in advance.

Just thought I would let anyone who's reading this
topic know that I have resolved my issue, it was to
do with the Audio Configuration of Logic to the
inputs from the MOTU. I went to Logic>Audio>Audio
Configuration and configured it so that each track
received from the respective inputs.
You might want to mark the thread as "Answered".
This will let anyone with the same problem know
they might find there answer here. RIght now the
thread is listed as "Unanswered". To do this click on
the answered link at the top of the thread.

Need help finding a audio system ( stressed)

I have cd with over 100 songs , and I need help finding a boombox that will play the CD anyone have any idea, I got no help from the store.

here are the specifications for Philips eXpanium eXp 2461 , if somone can help me find a boomboox with simular specifications it would very helpful
Philips eXpanium eXp 2461 - CD / MP3 player
CD System
CD system type CD / MP3 player
Media load type Top-load
Playback modes Repeat all,
Resume play,
One track repeat
CD system response bandwidth -19980.0 Hz
Signal-to-noise ratio 85.0 dB
CD shockproof memory 45 seconds
MP3 shockproof memory 100 seconds
CD-R compatible Yes
CD-RW compatible Yes
CD track programming Yes (50 tracks)
Digital audio standards supported MP3
Supported bit rate 32 - 320Kbps
General
Product type CD / MP3 player
Weight 8.0 oz
Carrying Case
Case type None
Built-in Display
Audio system built-in display LCD
Audio Features
Sound effects Digital Dynamic Bass Boost (Digital DBB)
Sound output mode Stereo
Additional features

Need help with Conditional Audio

Hello again! So early on into a course, after a couple intro slides, I have a sorting slide to direct users to other parts of a course (self-led learning in a way). However, I have an audio narration that plays on entry to that slide (not slide audio, it plays via advanced actions). I'm trying to figure out a way so that once they have viewed that slide once and heard that audio the first time, any time they get sent back to this sorting slide, they don't hear the audio again. How might this be done?
What I have already tried: I've tried two things, first I set up a variable called Sort_Audio. On exit of the slide previous, Sort_Audio would be assigned a value of 10. On entry to the sorting slide, an advanced action would check if Sort_Audio is equal to 10. If it is, it plays audio (and clears another variable that is unrelated, I just needed to do both things, so I combined them). I have On Exit from the sorting slide an advanced action that resets Sort_Audio to 0 so that when a user gets sent back to that sorting slide, it would theoretically not star the audio. Problem with this in the first place is for some reason it won't even play the audio the first time.
The other thing I tried was quite similar, but instead of assigning values to slides I tried cpInfoLastSlideViewed and equalled it to the name of the previous slide, as well as doing the same thing for cpInfoPreviousSlide. Neither seemed to work.
Any help would be much appreciated! Thanks!

The problem is resolved. Using TTS, the audio went onto the slide. I had not removed it from the slide audio so that the Advanced Action could work. Lieve, I got it to work by being extra careful to get each step correct and complete and assuring that the slide didn't have audio attached to it. Rod, I could not get the test project to work with audio attached to a smart shape. I believe it is because I am not controlling visibility of the smart shape--a logic test for another project and another day.
Here is what I finally got to work:
I created a project to get the procedure working before I put it into the big project. Here is a description of the test project.
Slide one has a smart shape (not used as a button) and a button which goes to the next slide. There is slide audio that plays when the slide is viewed.
Slide two has a smart shape that is used as a button to go back to slide one.
First Test with simple Advanced Action (no increment of variable):
Variable used is called "v_visit"
Conditional advanced action is called "checker"
If v_visit is equal to 0
Then Play Audio "text to audio X" (created with TTS. I also tested it with recorded voice in a second test, "RecordingX.wav")Assign v_visit with 1
Else Continue
Slide one, on enter, execute Advanced Action "checker"
on exit, No Action
Second Test with different Advanced Action (variable increments):
Variable called "v_counter"
Advanced Action (conditional) called "menuAudioChecker"
First condition ("setCounter")
If 1 is equal to 1
Then Expression v_counter = v_counter + 1
(Else not used)
Second condition ("checkCounter")
If v_counter is equal to 1
Then Play Audio "Text to AudioX" or "RecordingX.wav"
(Else not used)
Slide one, On Enter Execute Advanced Action "menuAudioChecker"
On Exit, No Action
On this "Second Test" I added a smart shape to display the contents of v_counter and it counts as expected. As Lieve has indicated in other posts, if one desired a different audio to play based on the value of v_counter this would allow that to happen. In my case in the production project I could play audio associated with section 6 when they return to the menu after completing section 6.
Thank you for patiently working with me to resolve this issue (mostly due to my own oversights).
Most importantly, thank you for the excellent Advanced Action model to use for the project.
Michael

Need help in tracking my iphone which I lost recently.

I am a loyal fan of Iphone. Not telling this because I need help.
I have lost my iphone recently, and need help in tracing it. Please help me here.
I strongly beleive Apple can easily trace out of its existance based on my iphone's indentication details/itunes it connects to and the data it sends to apple servers..
It is not just finding my iphone but proves why Apple's technology is the best and gives A LOT of confidence to Iphone buyers.
Looking forward for responses.

What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
       Find My Mac can be used from Find My Phone at iCloud.com and via Find
       My Phone on your iDevice.
      The following is third-party anti-theft software:
           1. STEM 2.1
           2. MacPhoneHome 3.5
           3. MacTrack 7.5.0
           4. VUWER 1.7
           5. Sneaky Bastar* 0.2.0
           6. Undercover 5.1.1
           7. LoJack for Laptops

Need help to open audios attached in a PDF file

Hello
I just need help. I have ordered a reviewer online that has audios and texts in a pdf file. I was told to download the latest adobe reader on my computer. I have done the same thing on my ipad mini. I am not so technical with regards to these things. Therefore I need help. I can access the audios on my computer but not on my ipad.
I want to listen to audios with scripts or texts on them so i can listen to them when i am on the go. I was also informed that these files should work in any device. How come the audios doesnt work on my ipad.
Please help me on what to do.
Thanks

Audio and video are not currently support on Adobe Reader. :-<
You need to buy a PDF reader that supports them. My suggestion is PDF Expert from Readdle ($US 9.99)

Can you export multi track audio using FCPX?

hey guys
i can only find export audio under the "share" menu
and it has aiff,aac and mp3, no wav or omf and no options to include as multi tracks rather than a single stereo track or 5.1 surround
do you guys know of a way to export multiple tracks? without muting every track and export numerous times of course

Typed this hours ago and forgot to post it.....
Have actually done that and sent a test piece to the broadcaster. Not sure if I have got the audio tracks in the right order.... from top to bottom would that be audio tracks 1-4, with four at the bottom? I am waiting to hear back from the broadcaster to see if the test piece works as they expect it to.

I need help with tracking

Ok the video that you can see on my youtube is the one I need help with. The video is actually in 1080p and I have no idea why it is showing in such a low resolution, but that is not the problem. I need to track the gun and add a null to that track, after that I want to add a red solid layer and bring down its opacity a little, to simulate a laser sight from the gun.Then I tried to parent and SHIFT parent the red solid to the track, the end product would have to look like what you can see in the picture. I have watched a TON of videos about tracking and just can not the the result I need. the laser needs to follow the gun as I aim up and bring the gun down. How should I do this.......? Please someone help or link me a tutorial that will be helpful.....

You have a couple of problems. First you don't need to use shift parent, just parent. Second, your red solid is a 3D layer and you have applied 2D tracking info to the solid. Actually, there's another mistake and it is in the tracking. You should also be tracking scale because the gun moves from left to right as well as up and down. This changes the distance between the front and back tracking points.
My workflow with this project would be:
Track Motion of the front and back of the gun including position, scale and rotation
Apply the track info to a null called GunTrack or something like that
Add a solid and apply the beam effect or mask the red solid to simulate the shape of a laser sight
Change the blend mode of the solid to ADD
Move the anchor point to the center of the starting point of the laser
Parent the solid to the Gun Track null
That should do it.

Multi track audio recording with ipad air

Are there users of ipad air with a usb connecting adaptor and a usb audio device making multi track recordings? I have had limited success doing this with my previous generation ipad and am wondering about the stability of eight-track recording on the ipad air.

Just thought I would let anyone who's reading this
topic know that I have resolved my issue, it was to
do with the Audio Configuration of Logic to the
inputs from the MOTU. I went to Logic>Audio>Audio
Configuration and configured it so that each track
received from the respective inputs.
You might want to mark the thread as "Answered".
This will let anyone with the same problem know
they might find there answer here. RIght now the
thread is listed as "Unanswered". To do this click on
the answered link at the top of the thread.

Best multi-track audio editor?

Hi all.
About to purchase a Macbook Pro, but I was wondering about audio editing? I use Sony Vegas on PC mostly because of the simplicity, and the multi-track editing. What softwares are available on Mac that would enable me to do the same thing? I create song mash ups, using multiple songs clipped into one track mainly. All of the youtube video's out there are for Video/Audio but I'm only interested in audio editing on it's own.
Thanks

Roddy has covered that in his http://www.iwebformusicians.com/MusicPlayers/Players.html site. Any flash player you use will require you to upload the audio files to the server and link to them there.
Piggybacking on what I learned from Roddy's site I put together some demo pages of flash players:
Audio Player Wordpress
Yahoo Media Player
Slim Player Jutebox
Roddy has a couple of jutebox versions on his site and tutorials on how to create them.
OT

I need help fixing my audio

i need help trying to fix my audio

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need help implimenting PLUS ldf in c++ via XMP sdk

I'm apparently suffering major brainstem bitrot and generating lots of brain coredumps, and I need help.
I'm using the XMP toolkit sdk 5.1.2 in c++ under gcc on Debian to impliment embedding PLUS ldf licensing metadata (reference: http://ns.useplus.org/LDF/ldf-XMPReference ) into images.
I have no problems generating compliant plus ldf xmp in code for everything EXCEPT for single line detail entries like "<rdf:type rdf:resource="plus:LicenseeDetail"/>" in several places in the ldf specification, viz:
<plus:Licensee>
   <rdf:Seq>
     <rdf:li>
          <rdf:type rdf:resource="plus:LicenseeDetail"/>
          <plus:LicenseeID>http://plus-id.org/AAA-987</plus:LicenseeID>
          <plus:LicenseeName>ABC Advertising Agency</plus:LicenseeName>
     </rdf:li>
   </rdf:Seq>
</plus:Licensee>
I can generate the appropriate text in memory then parse that to get an appropriate SXMPMeta and merge that, but I would really like to be able to properly generate the proper xmp in code, and would really appreciate any help preventing further brainrot!
I'm certain it's both simple and trivial, but I now can't see the trees because of the forest ... Thanks

Hi,
I'm not a XMP expert but I've been working for some years with Semantic Web technologies. My understanding is that XMP is a subset of RDF (one of the main pieces of the Semantic Web) so I will try to make my contribution to this problem from there.
Consequently, looking at your problematic piece of XMP:
<plus:Licensee>
   <rdf:Seq>
     <rdf:li>
          <rdf:type rdf:resource="plus:LicenseeDetail"/>
          <plus:LicenseeID>http://plus-id.org/AAA-987</plus:LicenseeID>
          <plus:LicenseeName>ABC Advertising Agency</plus:LicenseeName>
     </rdf:li>
   </rdf:Seq>
</plus:Licensee>
I can say that it isn't valid RDF so it shouldn't be proper XMP. This can be confirmed looking at the example for the property plus:Licensee available from the specification (http://ns.useplus.org/LDF/ldf-XMPSpecification#Licensee):
<plus:Licensee>
   <rdf:Seq>
      <rdf:li rdf:parseType="Resource">
         <rdf:type rdf:resource="plus:LicenseeDetail"/>
         <plus:LicenseeID>http://plus-id.org/AAA-987</plus:LicenseeID>
         <plus:LicenseeName>ABC Advertising Agency</plus:LicenseeName>
      </rdf:li>
   </rdf:Seq>
</plus:Licensee>
I have marked in bold where the problem is. Your piece of XML is missing the rdf:parseType="Resource" construct. I will explain why this is necessary from what I know from RDF. RDF is based on a graph model. There are resources, which correspond to graph nodes and represent the things the RDF metadata is talking about, and properties, which correspond to graph edges and represent the attributes and relations used to say things about the resources.
In RDF the convention is to use lowercase names for properties. This doesn't seem to be the convention in XMP so we must take a closer look at the XMP piece in order to identify what parts correspond to resources and to properties. From the LDF specification we know that plus:Licensee correspond to a property so it should link to a resource, in this case rdf:Seq (more specifically it is an anonymous resource (no id provided) of type rdf:Seq). Your example should have some additional markup before plus:Licensee, surely the resource that represents the licensee about which we are specifying the licensee using the plus:Licensee property.
Now, if we continue from the resource of type rdf:Seq, there is the rdf:li property (lower case as it is directly reused from the RDF specification). The problem now is that if we look directly inside rdf:li property we find rdf:type, plus:LicenseeID and plus:LicenseeName. It is clear that rdf:type (lowercase) is a property and from the LDF specification we can see that the other two also correspond to properties. Therefore, there is the problem. We have a property (rdf:li) pointing to three properties (rdf:type,...) so we are breaking the graph data model: nodes (resources) are connected through edges (properties) that link two nodes.
This is not the case for the example in the LDF specification. The rdf:parseType="Resource" constructs is a shortcut for:
<rdf:li>
   <rdf:Resource>
         <rdf:type rdf:resource="plus:LicenseeDetail"/>
         <plus:LicenseeID>http://plus-id.org/AAA-987</plus:LicenseeID>
         <plus:LicenseeName>ABC Advertising Agency</plus:LicenseeName>
   </rdf:Resource>
</rdf:li>
It basically says that the following properties should be parsed as being connected to an anonymous resource. In order to make it clearer, it is helpful to look at the graph behing that markup. For instance, you can use the RDF2SVG service and render the graph behind the example from the specification (which I have make available from a custom URL):
http://rhizomik.net/redefer-services/render?rdf=http://rhizomik.net:8080/html/~roberto/tmp /ldf-simple-example.rdf&format=RDF/XML&mode=svg&rules=http://rhizomik.net:8080/html/redefe r/rdf2svg/showgraph.jrule
I hope all this makes it clearer.
Best,
Roberto García
http://rhizomik.net/~roberto/

Need help!!! multi-tracks audio to quicktime via compressor

Similar Messages

Maybe you are looking for