Need help!!My camera icon is gone!!

Hello. I recently bought iphone3GS.
My 2 year old was playing with it one day and now I see that my camera icon is gone!! I searched for "camera" but no result.
How do I get it back so I can use the camera function??
I am a newbie so detailed help will be very much appreciated ^^
Please help~~

Are you sure your 2 year old didn't accidentally "slide" your camera icon to a different page? The "canned' icons that came with the IP can NOT be deleted (at least normally). However, if they are pushed for a moment, they start to giggle and then a swipe will move an icon to the next page. You can move them back the same way.

Similar Messages

My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..

My appstore n camera icon has gone..anyone can help me..i already try to go setting and restriction but did not works..
I also cannot update ios..how to solve this problem..?

Your going to have to perform a restore.

Need help - N9 camera does not respond

The Nokia N9 does not alow taking photogrpahs indicatng that "Can't use the camera while you are connected to your computer". I have disconnected the usb cable from the computer using the normal procedures. Need help to get this corrected.

Hi, Buddhimarambe. Welcome to the Nokia Support Discussions! Have you tried to reboot the phone? Press and hold the power key for at least 8 seconds. To switch your phone on again, press and hold the power key. If the issue remains, you can try to restore the phone's default settings:
1. End all active calls and connections.
2. Select settings icon and Reset > Restore settings.
Note: After restoring the original settings, the phone switches off, and then on again. This may take longer than usual. Also, this will not affect your personal data. Let us know the outcome.

Need help installing Camera Raw Presets from DVD

I got the NAPP Goodies DVD and I am attempting to install the Camera Raw Presets. It says to put them into Library-Application Support-Adobe-CameraRaw-Settings... When I get to CameraRaw the ONLY folder in there is CameraProfiles. I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one. I updated CameraRaw and still no settings folder. I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where. I am using CS3 specifically Photoshop and Bridge. I do not have Lightroom.
Do I need to reinstall Camera Raw and how do you do that? Will I then lose my presets that I made in CameraRaw?
Thanks for your help

The correct location (on Mac–since you don't bother to spec your OS) is:
User Name/Library/Application Support/Adobe/CameraRaw/Settings
All user level stuff will always be in the User folder. Root level stuff goes in the root level/Library/Application Support/Adobe/CameraRaw folder.

Need help ASAP (Camera usage)

Hi guys!
I'll get right to it... I'm brand new in Adobe After Effects, but I think I've adapted to it greatly thus far, but I'm stuck on one thing.
I'm following this tutorial from from AETuts+:
http://ae.tutsplus.com/tutorials/motion-graphics/design-rhythmic-motion-typography-in-afte r-effects/
I've done everything in the tutorial correctly so far, but I'm stuck at the part at 10:05 into the video.
I have everything set up like he does in the tutorial. I created my camera, my null object, linked the camera to the null object, set my text and null object for 3D, etc, etc.
However, notice how in the video when he slides the camera position to zoom in, mine will NOT do that for some reason. On my version of CS5 my screen looks almost exactly like his does, but when I click on my Null Object, hit "P" and scroll it to make the camera zoom in my words, it just will NOT zoom in.
I see a box on the outsize of my video that I believe is illustrating the zoom level of the camera, but that's the only thing that moves. It doesn't actually zoom in or out on the video itself.
Here's a picture of my what my set up looks like right now:
http://img98.imageshack.us/img98/6227/adobeae.png
I'm in the middle of this tutorial, so any immediate responses are greatly appreciated! Thanks for the support.

Sorry about the miscommunication. I'm replying from my iPhone. Siri doesn't get all the words right.
I didn't mean to remove the parenting, I meant that sometimes people get the parenting the wrong way around. When posting screenshots it's much easier to just use the little camera icon at the top of this dialogue. Makes them easier to find.
So here's the other thing that can be wrong. Your text is not a 3-D player. I am assuming the text is in the pre-comp. The pre-comp is a 3-D layer, but collapse transformations is on so your text is interpreted as what it is, a 2-D layer.
Turn off collapse transformations, or leave the pre-cop a 2-D layer and make your and nested text layer 3-D. Or, if you really want you can have both of them 3-D layers.

NEED HELP - Skype Phone icons for my site - one fo...

I need help please
I have a website with 1000+ members (1000+ phone numbers). I need members to call each other once we give them approval to contact via phone. However, I don't want them to see each other's number (also, it should show while dialing) but just click on logo and the other site phone rings (system will search database and call number assosiated to a profile.)
I have my PHP developers but they are not sure how to even start and out of ideas. And even if we do it on our website, will it destroy our site's performance/bandwidth...etc

Hi, Tamer732,
I have learned the best course is to please contact Skype Customer Service with your enquiry. Here is the link to use: https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
Please report back if you do not receive a timely or complete reply.
Best regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Need help installing camera raw 4.6

hi, i have cs3, vista, just bought a nikon d700 and can't open my pictures in adobe bridge anymore. I shoot in raw...i tried uploading the 4.6 update and am having a VERY difficult time, is anyone available to help me or walk me through steps....i've been struggling for a few hours....thanks!!!

The easiest way to install it should be to go to the Photoshop Help menu, select Updates, and follow the instructions in the dialog boxes. That will download and install it for you.
If you want to try to install it manually, follow these steps:
1. Exit Photoshop CS3 and Adobe Bridge.
2. Open My Computer.
3. Double-click Local Disk (C:).
4. Navigate to:
(Please read directory carefully)
Program Files\Common Files\Adobe\Plug-Ins\CS3\File Formats
5. Move the existing Camera Raw.8bi plug-in to another location (for example, a new folder on your desktop). Ensure you keep this version in case you need to revert back.
6. Copy the Camera Raw plug-in,
Camera Raw.8bi, from the download into the same folder as Step 4.
7. Launch Photoshop CS3 or Adobe Bridge.
NOTE: If generic camera thumbnails appear in Adobe Bridge, follow the these steps:
1. Check to make sure the plug-in was installed in the correct directory in step 4 above.
2. Start Bridge.
3. Choose Tools > Cache > Purge Central Cache.
Important: Purging the Central Cache deletes cached thumbnail information for all folders. It also deletes labels, ratings, and rotation settings for read-only files (for example, files on a CD or locked files) or file formats that don't have XMP support.

Need help updating Camera Raw for d600.

I have PSE 11 and have turned off my firewalls and still cannot get a Camera Raw update newer than 7.1. I have a d600 and it wont work through that. I know it can be done since I wasnt having this problem before I had to restore my computer and reload my software. I have searched Adobe up and down and everything says to us Help>updates...but its not giving me the option to update. Can anyone help...or send me the file.
Thanks, Katy

Officially, you are not suppose to update your PSE11 and that is why Adobe is not allowing you to update the product by going to Help >> Updates.
However, this does not mean you can't. You can always update your product manually provided you have the basic knowledge of Windows file folders and how to rename, browse and delete old files. Having said this, to update your PSE11 to the latest version of Camera Raw 8.3.0.141, you can do this:
1) Download the update file from this link:
<http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw8-8.0/8.3.52/setup.zip>
2) Unzip the downloaded file to your desktop
3) Browse the unzipped folder and double-click on the file called: "AdobePatchInstaller.exe". You might get a prompt to close PSE11 if it is open, so close it and press "Continue" button.
4) Wait for about a minute until PSE11 is updated.
5) now launch PSE11 and from Photo Editor, go to Help >> About Plug In >> Camera Raw
6) you should see something like in this picture:
Good luck but post back if your system did not update automatically. Windows XP, and Windows Vista does not update automatically using this method so there is another method you need to try. Post back anyway to let us know.

Need help updating camera raw in CS4

I had CS4 installed on a computer that crashed several months ago. I then installed it on my laptop but have not been able to get camera raw to update. When I try to, it says I need to close Bridge and try again, but I don't have Bridge or Photoshop open when I am trying to do the updates. Any suggestions?? TIA

What Trevor said.
See http://helpx.adobe.com/creative-suite/kb/error-installation-cannot-continue-bridge.html

Need help with camera question

will these cameras work in 1movie 6.0.3?
panasonic hdc-dx1
sd1
sd5
sx5
these seem to have usb connections while i thought imovie needed firewire to download movie files.
thanks

titanium boy wrote:
will these cameras work in 1movie 6.0.3?
no, none.
iMHD6 supports ONLY miniDV based devices (SD or HDV) ..

Need help with camera

This is the second time I have done a factory reset to fix the camera. This time it has not worked. What now!

Yes, your pictures taken with the Playbook camera certainly should show in the Pictures folder on the Playbook.
Just for the heck of it, can you try turning your Playbook off and back on and check your Pictures app/folder again?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need help with Camera app

Hello RIM support,
I am a new owner of BB Playbook. Everything seems to be working okay except camera app. I can take a picture with it but nothing will show up in picture app. According to the help video, the pictures taken by camera app should show up in picture app from the menu option.
Please help.
Thanks
Kevin
Solved!
Go to Solution.

Yes, your pictures taken with the Playbook camera certainly should show in the Pictures folder on the Playbook.
Just for the heck of it, can you try turning your Playbook off and back on and check your Pictures app/folder again?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Need help installing camera raw plug-in for Photoshop CS6

I have a Raw photo that won't open in my Photoshop CS6. The error message and online documentation say the same thing...They recommend going under Help > Updates and following the instructions. Problem is, "Updates" is not actually a choice under the Help menu.
I tried downloading the file directly, but it doesn't launch and installer and I'm not sure what to do with the file.
Any ideas? Where can I go or what can I do to get this plug-in installed?

Adobe - Photoshop : For Macintosh

HT1918 When I use my credit card and enter my security number it's says it's and invalid security number when it in fact is right I need help all my apps are gone and I can't get them back whith out the billing info done I need help bad my card is good a

Pppppplleeeeaaaaaasssee hhhhhheeeeeeelllllllpppp mmmmmeeeeee

Hello
I am having the same issue, I now my card number as well as the security code is valid so i am not sure what the issue is...CAN SOMEONE PLEASE HELP US?!

Help my dashboard icon has gone missing ?, help my dashboard icon has gone missing ?

my widget thing is missing its not in application and i carnt find it in spotlight? its not been there for a while? it still comes up if i press f4

Drama over. I found a question like this, about the Contacts Icon being in Utilities now. Doh!

Need help!!My camera icon is gone!!

Similar Messages

Maybe you are looking for