Need Help, my Ipod Nano won't connect and sync with ituens

So I downloaded the most recient itunes update the other night, and now my ipod nano will not sync with itunes.  My computer when I search devies and printer shows in devies as (apple ipod USB device, and for unspecified devices Apple Moble Device USB Driver), and I have tried other ipods around the house and they will sync with my itunes with no problem.... also another thing is that if I close the itunes and try to reopen itunes with my nano is pluged in it will not open. But when I remove this particular Ipod, and try to reopen itunes ill will open.
I have tried redownloading itunes a million times, used different USBs, restored itunes to new, and restarted ipod, and have restarted the computer a million times.
Why is it that this one nano will no longer link to itunes so that I can update my music on it. Please any one begging you, I am loosing my mind a patiences. Anyone help me please, I just want to update my music on this ipod.
How can one ipod no longer sync????
Please and thanks.

I saw in one thread related to this that you have to make sure that the process "iTunes Helper" is running when you have your iPod connected. You can see that by running Activity Monitor, select All Processes, and then look for iTunes Helper. Based on everything else you tried, there could be a physical problem with your Nano. One of the pin connections may be bad. Will it show up on another Mac's iTunes?

Similar Messages

  • My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when connected

    My Ipod nano 3rd generation will not sync with itunes or show up on windows, but other ipods do when I connect them using the same setup.

    Hey Biglou1,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand that your iPod nano(3rd generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
    Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano3gen/
    If the above did not resolve your issue, choose an applicable article below that best describes your issue.
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • My 5th Gen iPod Nano won't connect to itunes or computer, just keeps resetting. Reinstalled itunes to no avail, other ipods connect fine...help please

    I re-installed i-tunes but this didn't solve the issue.  Other iPods including additional 5th generation nanos connect and sync just fine.  When it's plugged into the computer, it says "Connected...Eject before disconnecting" but doesn't show in itunes or the computer, then the ipod resets and the cycle begins again.  It plays music just fine.  It also plays fine when directly connected by USB to a Toyota Avalon.  Any suggestions on how to resolve this?  Thanks!

    Hello djbrown1
    Check with the article below to troubleshoot issues with your iPod not showing up in iTunes. There are two symptoms to look for to pick the right avenue of troubleshooting. Look for to see if your iPod shows up on your computer, similarly like a camera or an external hard drive. Check out the articles below to troubleshoot you further.
    iPod not appearing in iTunes
    http://support.apple.com/kb/ts3716
    iPod nano (5th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    Regards,
    -Norm G.

  • Help! ipod nano won't hold as many songs as it says it can

    I have an ipod nano that is 2GB and can hold up to 500 songs. I only have 113 songs on it and when i try to put more on it it says that there is not enough room to put more songs on it. How do i make it able to hold more songs????
    Toshiba   Windows XP  

    Bear in mind that the song limit advertised is based on 4 minute per song, 1MB per minute, encoded as 128 kbps in AAC format.
    Check the encoding of your songs. To do this, right click one the sorting columns in iTunes tick bit rate, then click this new column to sort the songs by bit rate. Any songs that are encoded at higher than 128 kbps will be causing excess space to be used for storage. To change the bit rate of these songs you can convert them to AAC format (sound quality will be lost). Or you can reimport them from CD/Computer once you have changed the import settings as detailled below, but that could be time consuming.
    To convert go to the edit menu, select preferences, click the advanced tab, and select importing.For best song capacity on the iPod, make sure that the encoder is set to "Import using AAC encoder", and "High quality 128 kbps". Hit OK. Then collect together all the high encoded songs and select them all (click the top one and hold shift, then click the bottom one). Right click the highlighted area and go to "Convert selection to AAC". This could take a while if there are many songs.
    Once complete, go to the Edit menu, and select "Show duplicate songs". Delete all the "old" songs, recognisable by their bitrate, format or size. Again, to show these, right click a sorting column, and tick the respective ones.
    Once this is done, update the iPod.
    If your songs are all changed into 128kbps AAC and are mostly all around 4 mins long, then you should get very close to the song limit advertised

  • Ipod Nano won't restore to sync

    My brand new Ipod Nano won't sync with my Itunes.  The Itunes software tells me to restore my Nano, The screen it tells me to restore using isn't on my Nano, but I restore to factory settings, and it still won't work.  Gives me a message in Itunes"The iPod "iPod" cannot be restored because it contains files that are in use by another application."  What???  I just plugged it into the computer after opening it in the box from the store?

    Make sure the Enable disk use option is NOT ticked from under the iPod's Summary tab in iTunes. If you do have to remove this tick mark, be sure to hit the Apply button in the lower left hand corner of the window in iTunes to update the changes to your device. Then try restoring it again.
    B-rock

  • IPod touch won't mount or sync with iTunes?

    ok here's my problem, 2 days ago i bought an 8gb iPod touch.
    The first time i plugged it into my computer it mounted to iTunes and synced with iTunes seamlessly and quick.
    Now when i plug it in, it will not even show up in iTunes.
    So far i've tried
    -restarting my iPod Touch
    -deleting itunes then re-installing iTunes
    -restoring factory setting on iPod touch
    -turning the ipod off, then once i open itunes, turning it on
    nothing happens, itunes works fine, but my iPod just will not sync or mount to iTunes 8
    please! someone help me!

    ok i figured it out.. not what was wrong but what to do.. you have to restore your system without having the iPod connect of course.. then uninstall itunes and quicktime then delete every trace of them from your computer. (once you reinstall iTunes you will get back everything you had) then once you restart your computer reinstall itunes and restart your computer again. now plug ur iPod Touch in the computer and it will work then.
    same thing happened to mine.. it took a while to figure it out but i got it...
    you have to uninstall them then delete it from program files... now it works perfectly

  • TS1363 My iPod nano 6th gen has stopped syncing with my laptop (windows 8)

    My iPod nano 6th generation has stopped synicing with my laptop (Windows 8)
    It worked fine before, but is now coming up with 'An iPod has been detected, but it could not be identified properly'
    I've tried unplugging it, and re-trying, restarting my computer and uninstalling and reinstalling iTunes but it's still coming up with the same message... any help?

    I've tried unplugging it, and re-trying, restarting my computer and uninstalling and reinstalling iTunes
    Doublechecking. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • Ipod Nano 4th Gen can't sync with ITunes.  I'm using Windows 8.1 w/Media Pack

    My IPod Nano 4th Gen will not syn with ITunes after I upgraded to Windows 8.1 with Media Pack.  I'm using Internet Explorer 11 and Comcast is my IP

    Maybe:
    "Waiting for changes to be applied": Apple Support Communities
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    - Restore from backup. See:                                 
      iOS: How to back up

  • My new ipod nano 7th generation will not sync with i tunes, followed all the apple on line trouble shooting ideas, this device will not show up in itunes but i can see it from explorer, windows 7 user.

    ipod nano 7th generation will not sysc with i tunes is updated , device does not show up in itunes under devices but shows itself in explorer.ran diagnostics failed sync. about ready to take this back to best buy.

    yes i have a solution to my problem only because of a recent phone call from apple they were great.......... in the right hand side of itunes my i pod was displayed.  click on the ipod symbol........at the top of the page you will see summary,,,,,,music,,,,,,movies,,,,,,tvshow,,,,,,photo,,,,,on this ipod.
    click on music check mark music done and sync
    problem solved
    thanks apple

  • My iPod Nano won't connect to iTunes and I need to charge. Sometimes it turns on but then, when I try to connect it when it turns on. It just turns off all over again. Please help?!

    Well, I have an iPod Nano and it's not turning on. When I try to connect it, since I have to charge it. It won't work. It always turns off and on.

    you dont have to connect to itunes to charge a nano you just plug it in to the computer and it will charge if you give it time.i hope that my advise helps.:)

  • My iPod nano won't connect to any computer!!

    It worked for a while on my computer, got my bunch of songs on it. Then it stopped connecting into iTunes and then stopped connecting into the computer all together. It won't even light up when I plug it in. I can still listen to my songs on it, I just can't charge the battery or get new songs. I tried using all the different USB ports, and restarted my computer about 50 times. (I'm using windows) I also reinstalled iTunes and the iPod but it's still not working! I also took it to a friend's and tried plugging it into their computer with my iPod cord and their iPod cord and it still wasn't connecting!
    I desperately need help please!

    I am having a similar problem. I am actuall on my third 2nd generation nano. One I had to return do to that issue. I recieved the second one (product red) and I was able to get 600 songs on it froma friends computer. It connected to mine once but won't anylonger. The third one I was having the same issue with it but somehow got it to work. I updated itunes and ran a virus scan. I wish I could help but I'm starting to think about stomping on them. I have 4, three work and one dosen't.

  • Need help registering iPod Nano (3rd Gen) into iTunes

    Got the 3rd Gen iPod nano for Christmas, but I'm having difficulty setting it up.
    The manual says I need to wait for something known as a "Setup Assist" to come up. Nothing ever did.
    Also, in iTunes, it tells me (when I click on the iPod icon under "devices") that I still need to register the product. It takes me to the terms and conditions sheet, and as is typical, tells me to "agree to terms" and then... I click "save." it asks me to save an rtf file onto my computer. I do so, but nothing ever happens. And my iPod still won't work.
    Am I saving it somewhere wrong? (I've saved it in My Documents, as well as the iPod and iTunes folders in My Programs)
    Any help is appreciated, and Merry Christmas

    Okay! I found out what to do.
    What you're going to have to do is go into the Control Panel on your computer.
    Go into "Appearance and themes." You're going to have to change the screen resolution. 1280x600 or so should do the trick.
    Go back into iTunes and you should see the "continue" button on the far right. (Very scrunched up and annoying, I know. But it works!)
    I hope that helps you out.

  • Help! Ipod nano won't turn on after disconnecting!

    Okay I've had my Ipod nano for like 3 weeks. I've used it once. It worked fine when I first got it and after my battery ran out I haven't used it for about a week. When I got it back I hooked it up to my computer and updated the stuff on it as well as let it charge. After is says to safely disconnect, I disconnect it but it automatically turns off and won't turn back on. I've tried resetting it and nothing works. I thought the battery was dead but I've left it plugged in (not only USB on my computer but also tried an outlet) and it never completely charged. I've even left it plugged in overnight (well over the 4 hours it's supposed to charge). I have no idea what to do (It also took like at least a full day to completely charge the first time I've had it)

    Tuesday, December 02, 2008 7:23:56 PM
    Okay my iPod wouldn't turn on . (Guess I will be throwing out the box to ship my ipod for warranty replacement)
    at like 11pm dec 1 2008, the ipod was dead, pressing the power button did nothing.
    I thought it was a goner... I even ordered a warranty replacement..
    ipod wouldnt turn on . left it for 24 hours. when I got home from school the next day
    it tried to sync but my playlist did not exist..it even showed the folder in windows
    After trying various USB ports and seeing an Apple Icon, and "connect to power low battery"
    I even requested a warranty replacement... and apparently you throw out the box they send to cancel. I wish I could be courteous and let them know
    So in short
    PROBLEM;
    ==IPOD Won't Power on when you press the power button==
    (FIRST OF ALL , I STRONGLY URGE YOU TO NOT TRY TO OPEN THE IPOD UP,
    you will probably scratch or damage the beautiful iPod .. when it will be perfectly fine 24 hours later...)
    Try:
    RESET, and plug in to itunes and restore..
    SOLUTION:
    http://www.everymac.com/systems/apple/consumerelectronics/ipodfaq/ipod-troubleshooting-wont-turn-on-appear-hung-sad.html
    Official Apple Documentation:
    http://support.apple.com/kb/TS1383?viewlocale=en_US
    I guess my actual story will make you believe that THIS SOLUTION actually works.
    "Let the iPod battery drain
    In rare cases, iPod might get into a state in which it needs to be drained completely before it can be reset. If iPod didn't turn on after you reset it, follow these steps:
    1. Disconnect iPod from all power sources and leave it disconnected for about 24 hours.
    2. Reconnect iPod to the Apple iPod Power Adapter or computer and reset it.
    I even tried the iPod on 2 computers and it was sort of detecting the serial # in Windows
    but mostly freezing up windows.
    4. " Let iPod's battery drain"
    Was the solution for my iPod 3rd generation.
    So now that the problem was fixed, I guess iPod is so terrible after all
    Just don't drop your iPod get it a nice case
    it took from 9pm December 2,2008 to about Dcember 2,2008 6:45pm
    roughly 20 hours.. so this morning when I left I pressed the button and it wouldn't turn on
    I thought maybe the battery was knocked loose but the battery was just so low or something
    To prevent this problem I guess whenever you ipod is low battery, charge it before it gets dangerously low
    As sad as it is to wait like 24 hours without your iPod just to pray that the problem is the battery or something and then it will power on..
    When it actually does power on you would see the apple Icon
    == When it was all said and done==
    I didn't really need to use "restore" option, i think itunes resynced what it needed.
    And thanks to this I upgraded to Itunes 8 .. which I was too lazy to do before
    ==STILL DOESNT WORK?==
    If you bought it less than a year ago... Warranty..
    https://selfsolve.apple.com/GetWarranty.do
    Enter your Serial# and country and it will be located at the back of your iPod under where it says 8GB or whatever (at least for iPod Nano 3rd generation)
    I always like posting solutions, so that someone like me can benefit from it.
    It is my understanding that if you do send in your iPod they don't care about the USB cord or headphones that came with it, so you just ship the iPod itself
    see here for some frequently asked questions.
    http://www.apple.com/support/ipod/service/faq/

  • Ipod Nano won't connect to windows vista

    Help Help Help
    ive had an ipod nano 3rd gen for xmas and my hewlett packard pc with windows vista operating system wont recognise the ipod thus meaning im sat here wiv a shiny new ipod with absolutely nothing on it SOB SOB
    please someone help meeeee
    cheers Paul

    Your speaker has probably auto connected to your phone so the Nano can't see it. Turn off BT on your phone and any other BT devices you've connected with, put the speaker in pairing mode and try again.

Maybe you are looking for

  • Error msg shown while cancelling the GR - Material Document

    Hi All, While trying to cancell the GR for an Asset / Material the following error msg shown: Balance for transaction type group 10 negative for the area 01 Message no. AA629 Asset affected: 000000107102-0000 Diagnosis With the transaction entered, t

  • Getting Error - Cause: Status of the batch is not 'Completed' in OIM 11g R2 during Trusted Recon

    Hi All I am new to OIM 11g R2. I am trying to create custom connector for trusted recon. The case is to migrate the users from 10g to 11g R2. The recon event is created but it is in Event Recieved status and when I re-evaluate the event, its giving e

  • Safari is clearing saved usernames on websites

    On my iPad, when I close the Safari app, it logs me out of websites that I was logged into.  This doesn't happen on my iPhone.  Any ideas why this is happening and how I can change it?

  • Upgraded from 10.6.1 to 10.6.2 now I can't ssh into my Mac

    After the upgrade I can no longer ssh into my Mac from any other host on my local network. The connection simply hangs, and ssh -vvv does not provide any hints as to what is going on. I can, however, ssh from my Mac back into my Mac. I've increased t

  • ATI catalyst lockups

    Hello everyone! I've been fiddling around with this problem a couple of days, and I can't figure out what is wrong! I'm using a Radeon 9800XT with the catalyst drivers. This is my xorg.conf file: Section "ServerLayout" Identifier "X.org Configured" S