Need help, my ipod still conected to a different computer and wont connect

Hi guys and guirls,
I was on vacation and my niece conected my ipod to a computer and didnt eject it before deconected it, so now it always said that I am conected, even if I restore it, (and by the way my 2100 songs are gone) when I conect it to my computer it sas that it cant do nothing because some other file is still conected to it.....what can I do, does someone knows..
Thanks, for all your elps. Marc

Try here. Look especially at the driver and service topics. The iPod touch uses different drivers thant the Nano
iOS: Device not recognized in iTunes for Windows

Similar Messages

  • Help my ipod still has the screen lock on and the combo wont work

    I was just testing the screen lock thing to see if it would work so i set it to my birthday and then i test it out and it wont work my combo i tired every combo so it said if u forget combo plugg it into ur computer . i plugged it in and now what? i unplugged it and its still locked . wat should i do ?

    Plugging the iPod in to the computer only unlocks it until the next time you opt to lock the screen. It does not get rid of the old code that you no longer know.
    The only way to get rid of the older code and be able to set a new one if desired is to restore the iPod.
    To restore, connect the iPod to the computer, open the iPod updater (Start>All Programs>iPod>iPod Updater) and click restore.
    Restoring will delete all the files off of your Nano, and reset all settings, including the screen lock. It will not however, change anything in your iTunes library, so after completion, simply update your iPod as normal to get your songs back on.
    Then, you are free to set a new screen lock. Hopefully this time it will be one you remember.

  • I need help my ipod is unresponsive with a black screen and non working buttons

    Help

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • HELP my Ipod keeps on saying it's corrupt and wont restore

    My Ipod won't restore by pressing both the middle button and the menu button. It say's it's corrupt. I think it might of died because i've had it for one year and a couple of months. If it has, what can I do with it?

    "My Ipod won't restore by pressing both the middle button and the menu button"
    That's not how you restore an iPod, that's the procedure for resetting. Have a look at this page for instructions on restoring: Restoring iPod to factory settings with iTunes 7

  • Ipod touch 4g stuck on book logo and wont connect to itunes, also computer sees it as a t mobile mytouch???

    ipod touch 4g will only turn on when connected to the wall outlet OR I have a portable charger plugged into it and I can plug into PC that way. Computer sees it as T mobile mytouch and asks me to install drivers for it. iTunes doesnt see it at all. My ipod is now stuck on apple boot logo. I can get to itunes restore screen but computer wont recognize it to restore it to set up. Should I just junk it? iOS 4.2.1

    Start here:
    iOS: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
    Then try a restore.
    You may also have to place the iPod in Recovery mode or DFU mode to allow a restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Did you install any phone software? You may want to uninstall any.

  • Why do we need to have a observer run on the different computer

    Hello team,
    Why do we need to have a observer run on the different computer and how to install & confgure it on that different computer.?pls help
    5.5.6 Managing the Observer
    The observer is integrated in the DGMGRL client-side component and runs on a different computer from the primary or standby databases and from the computer where you manage the broker configuration. The observer continuously monitors the fast-start failover environment to ensure the primary database is available (described in Section 5.5.2.1). The observer's main purpose is to enhance high availability and lights out computing by reducing the human intervention required by the manual failover process that can add minutes or hours to downtime.
    Thanks

    854393 wrote:
    Thanks Aman,
    Do we need a same db binary & OS version for starting the observer on the different computer ?? here the primary & standby are liunx.
    Thanks in advance..
    Regards,it does not have to be on the same platform or operating system on which the databases reside, and it does not need Oracle EE and an instance (which means no extra license).
    To configure check this.
    http://gjilevski.wordpress.com/2010/03/06/configuring-10g-data-guard-broker-and-observer-for-failover-and-switchover/

  • I need help, my ipod touch is not recognized by windows as a harddisk

    i need help, my ipod touch is not recognized by windows like a memory card or a harddisk.
    i would like to transfer the files from pc to my ipod touch without useing itunes.
    as i see theres some people here that theires ipod touch are recongnzed as a digitl camra, mine is reconzied as nothing, some help plz.
    Message was edited by: B0Om

    B0Om wrote:
    ok but i still dont understed, only my itnes recongnize my ipod, when i go to " my cumputer, it dosent show up there, not even as a digital camra
    Your Touch is working correctly. Currently, without unsupported third party hacks, the Touch has NO disc mode. It will only show up in iTunes.
    how do i put programes and games in my ipod touch
    Right now, you don't. The SDK is scheduled to be released in Feburary. Then developers will be able to write programs that will be loadable.

  • I am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please

    i am trying to restore my ipod on a different computer and i have forgot my password and now it wont let get into it on the computer to retore it! Need Help Please

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • Ok guys i need help my ipod touch froze during an update now i put it inot the recovery mode or dfu and it will not reset itself at all it comes up with an error code and says this ipod cannot reset now does anyone have any ideas of what to do with it

    ok guys i need help anyone with my ipod it froze during an update now it will not work at all i ahve put it into the recovery mode or dfu and  it will not reset it self it comes up with an error message 1603 the number is and says the ipod cannot be reset anyone please help me i have tryed everything googled you tubed everything

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

  • I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

    I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

    There is nothing anyone can do.
    Sorry.
    You will have to keep looking for it

  • My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...

    My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...
    I feel like there must be an issue with the library location, but I don't know how to correct that.  My Dad recently wiped my computer and deleted Windows XP and installed Windows 7.  I don't know what he did, but my iTunes library is still intact it seems. However, I've added quite a few podcasts that I'd like to sync to my iPod.  When I connect it, it goes through the sync process, but ends quickly and says its safe to disconnect.  None of the new podcasts are on there though.
    Also, there was something really wrong with my iTunes account.  When I went to buy something from the store, it wouldn't accept my password, and when I went to reset it, it wouldn't recognize my birthdate and month (I had the correct username).  I ended up creating a new account and purchasing a song.  This time, it did sync the new song onto my iPod, but not the podcasts I'm trying to sync.
    As far as the library location, is there anything particular that has to be included in that library in order for it to be recognized by iTunes when you sync?  Awhile back (before my Dad worked on my computer), I had changed the folder location to my external hard drive, but in researching, I saw that I still had in another drive some folders with music that is currently on my iPod.  So it looks like I have some stuff on two different drives... Maybe this has something to do with it not syncing right?
    I did check, and my Firewall doesn't have iTunes blocked.
    As you can see, I'm not very experienced with all of this... Sorry for the confusion.  If you are interested in helping me and have any questions, please let me know.
    I'm hoping someone will be able to help me... I desperately want to be able to listen to my podcasts, as I'm a stay-at-home Mom of 4 little ones, and the podcasts are kind of an "escape" for me when the children are napping or playing. :-) 
    Thank you in advance for your help!

    Oh my goodness!!  I am absolutely thrilled right now B-rock!!  I don't know how I missed it, but when I went back to change the setting like you mentioned, I noticed that the very top box that says "Sync Podcasts" wasn't checked!  I have no idea why... But my heart started to race when I checked that box and all of a sudden it started syncing all my podcasts!!  It's gonna take a long time (I have 385 of them!), but I am just so happy you helped me with this problem.  Thank you SO much! 

  • I need help, I sent a job to my eprint address and it did not print

    I need help, I send two jobs to my eprint address and it didn't print, nor does not even show that it even got the job. I sent it from both of the e-mails that I have set up for it to except. Can someone please let me know what I am doing wrong. By the way my printer is a HP photosmart premium fax series C410A AIO. Thanks for your help in helping me resolve this matter, Mitzi,{Personal Information Removed}

    Hey mitzidg!
    Has ePrint been working for you in the past? If so, try power cycling your printer (unplugging it for about 30 seconds and then plugging it back in.) If you are still having a problem, try waiting a few hours and then trying again. Occasionally we are doing updates on the ePrint servers that can cause delays.
    Hope this helps!
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • HT5622 I've changed my Apple ID, but the iPod still insists on my old ID, and the old password no longer works, so I do I get the old ID to vanish and be able to use the new ID?

    I've changed my Apple ID, but the iPod still insists on my old ID, and the old password no longer works, so how I do I get the old ID to vanish and be able to use the new ID?

    - Go to settings>Store and sign out and sign into new account.
    NOTE
    - Apps are locked to the account that purchased them.
    - To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

  • How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    Vera,
    Use View > View Options, and set 'Sort By" to "Manual Order."
    Then you will be able to drag-n-drop songs up and down the list.

  • I need help getting my OS X Mavricks download to work and start downloading but it wont work

    i need help getting my OS X Mavricks download to work and start downloading but it wont work

    Contact http://www.apple.com/support/mac/app-store/contact/. They're responsible for getting this abysmal delivery system to work.

Maybe you are looking for

  • LaserJet Pro 300 M351A Wireless Accessory?

    On the HP website it clearly states that my printer (HP LaserJet Pro 300 color M351) DOES have a "wireless capability" ... This statement is to be found under the "Technical Details" section in the paragraph entitled "Connectivity and Communications"

  • Wrong conversion of source system after transport

    Hello, We ve got a a transport problem in our 3-3 Landscape. Connections for extraction are only between same systems ( f.e. dev to dev) BI Dev         BI Test       BI Prod R3 Dev         R3 Test      R3 Prod The conversion of source systems is on t

  • Doubt on receiver soap adapter

    hi , do we need to give the server details in the soap receiver details . ex: if i want to consume webservice using external definition what are the prequisites required and i need to send the same message in the format of WSDL file .

  • Why will my bookmarks be deleted when syncing?

    Just updated to ios6 and when I sync my snow leopard laptop, it tells me that I will lose 25% of my bookmarks.  This never happened before.  What do I do?

  • Transport a hierarchy created in transaction RSH1

    Hi to all, Is it possible to transport a hierarchy created with transaction RSH1 from the development system to the productive system?. Regards Jair