Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

Similar Messages

  • Apple airport express will not work with my iPad ?

    Apple network. Cannot be set up by this soft ware  ( this is the message I get when trying to set uo apple airport express

    I'd take a free Express.
    Use AirPort Utility - it's free too.

  • Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

    Please locate the model number of the AirPort Express and post back that information.
    The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
    We are not sure what you mean by "does not work".  Does this mean that the AirPort Express worked at one time and has just recently stopped working?
    Have you installed a newer operating system on your iOS device recently?
    Or, is this a new AirPort Express that you are trying to configure for the first time?
    If yes, what service will the AirPort Express perform on your network?
    Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

  • Will Pages work with MacBook Pro OS Snow Leopard 10.6.8?

    I am wondering if the Pages App will work with MacBook Pro OS Snow Leopard 10.6.8.  I am getting conflicting information from people, and I don't want to purchase and download the App if I am not able to use it.  Thanks for your help.

    Thanks so much for your help, Michael. Glad to hear it works for you.  This gives me enough confidence to go ahead and order the App.  Thanks again. 

  • After Leopard install, all three Airport Expresses will not work...

    I have three Airport Express' that worked completely fine before I installed Leopard. After the installation, the Airport Utility will not even detect them. No matter how many times I try to reset them, unplug them, or yell at them, they will not be recognized by the Airport Utility. Currently, all three units are completely useless and just flashing amber. I have tried to look through the topics to see if anyone else has the same issue but, I could not find one that seem to be a duplicate of this problem.
    Please help.
    -F.

    My guess - are you trying to connect to them wirelessly?
    If so, the only solution I found was to hook them up with an ethernet cable to the Mac.
    Airport then finds them OK and you can upgrade the firmware / software to latest versions.
    Hope that helps
    Andy

  • Acrobat Pro Not Working after Latest Update to Snow Leopard

    After getting the latest update for Snow Leopard I get the following when Acrobat tries to boot:
    Process:         AdobeAcrobat [157]
    Path:            /Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat
    Identifier:      com.adobe.Acrobat.Pro
    Version:         9.0.0 (9.0.0)
    Code Type:       X86 (Native)
    Parent Process:  launchd [77]
    Date/Time:       2010-03-31 11:25:30.253 -0600
    OS Version:      Mac OS X 10.6.3 (10D573)
    There is more after this but the summary is that it doesn't boot. Is anyone having this problem also? And if so how did you fix it.? I have tried uninstalling and reinstalling Acrobat but with no success.
    Thanks in advance.
    David

    BBfolgart wrote:
    Hi Michael,
    Thanks for your reply. However how can you upgrade when the program won't boot? I tried downloading again from Adobe but the version that comes over is 9.0. Is there anyway to force a load? Or anyway for Adobe to push me 9.3.1?
    Regards,
    David
    First try removing preference  and or .plist files for Acrobat. Then when you get working try this tip below that might help when you update the application and it fails.
    I've come across this in these forums That may or may not solve the update issue for "some" people:
    <http://forums.adobe.com/message/2692924#2692924>
    see if you think. it helps.

  • Isight is not working anymore after updating to snow leopard

    it used to work very well. i updated snow leopard 5 days ago. i try to use skype and photo booth, it is never working again. do people have the same problem?
    thank you for your information

    lightwright wrote:
    Thanks for the info - however surely this has something to do with the snow leopard software update - not a hardware failure or is that just a coincidence?
    My iSight was working fine before I upgraded to snow leopard? Is there a software fix coming?
    Welcome to Discussions, lightwright
    ... this has something to do with the snow leopard software update ...
    You may be correct that the problem has something to do with your SL update, but, as previously explained, many of us successfully use iSight every day after upgrading to Snow Leopard, so the problem is not SL itself. If you believe that your problem is with your update, you should consider reapplying the update using the method suggested above.
    If you continue to have iSight problems after properly applying the SL update, consider all relevant troubleshooting suggestions in http://support.apple.com/kb/HT2090
    However, if your iSight problem continues, and if iSight now does NOT show as a USB device in your Mac's System Profiler, yours is most likely a hardware problem. In that case, contact Apple or an Apple-Authorized Service Provider for service.
    If, after properly applying the SL update and using the Troubleshooting suggestions, iSight IS recognized in System Profiler but still does NOT work with any of your video-enabled Apple software, your disk may contain some pre-SL software that is causing problems. Either erase the disk and apply only Apple software to see if that fixes your problem, or seek help from your Apple-Authorized Service Provider.
    ... Is there a software fix coming?
    ¶2.1.1 of Terms of Use for Apple Discussions prohibit us from speculating on unannounced products, including updates.
    EZ Jim
    MacBook Pro (13 inch, Mid 2009) 2.26GHz w/Mac OS X (10.6.1)  G5 DP 1.8GHz w/Mac OS X (10.5.8) 
    G4 PowerBook 1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  LED Cinema Display  External iSight

  • USB printer on my Airport Express will not work..

    Hi, using the newest Airport Express to extend my network. Tried now to use it via USB to get a network printer. The printer (Canon Pixma MP 970) shows on my list for printers to add. When to install my Mac asks me to install the newest software, there is no possibility to say no and just continue. After a yes I get allways the same message, it is not possible to download the newest software from the server. There after the dialoge quiets and I cannot add the printer. Trying solving the problem manually by downloading the newest software from Canon I just get a note that I am not allowed to download from this page new software in order to security policy of Apple. I have to do it from the app store. Here I do not find a newer driver for my printer....what to do? My IOS X is 10.8.2.

    See if this helps you.
    http://www.ifelix.co.uk/tech/1011.html
    If not, you don't mention which Windows version you are using check iFelix's Site.
    http://www.ifelix.co.uk/tech/
    Cheers Don

  • Airport express G not working with new linksys N router

    I just swapped a new linksys N router into my old G network and my old airport express is flashing amber and refusing to acknowledge the network. It does not seem to be picking up. What does this mean and how do i fix it? thank you in advance

    someone posted this anyone , not sure i actually understand all of it
    hours of digging through blogs and Apple help docs, with some luck and trial & error, have gotten it to work. This experience seals the deal...if a Mac can ever run Excel, I'm abandoning my PC.
    For the benefit of anyone else in my situation, here's what I did:
    You have to override Airport Express's default desire to make itself the hub of a new network, and force it to be added as a client to your own network.
    First, plug the Airport Express into the wall, then reset it by holding down the reset button with a paper clip for about ten seconds. Plug in an ethernet cord that's attached to your wireless router.
    Open the Airport utility which you should've installed from the cd in the package. It should now recognize your Airport Express and the light will turn green. Be patient...mine took awhile, and even started flashing amber before it worked.
    You will need to manually configure the AE from the utility by typing in the name of your wireless network, setting AE to "join an existing network" instead of its default "create new network," and enable Airtunes.
    You may need to add the "Airport ID" printed on the case of the unit to your router's MAC list. This allows the router to recognize the device. Type your router's IP address into the address bar of internet explorer to access the router settings.
    If you don't see your speakers listed in a box at the bottom of iTunes, you will need to go to the settings window (in iTunes) and click "search for remote speakers connected to Airtunes."
    gonna try it out, cause nothing else has worked

  • Airport Express/AirTunes Not Working with New Verizon FIOS Connection

    I was just set up with the new Verizon FIOS high speed internet, and now my Airport Express/AirTunes will not connect to my remote speakers like it did previously. The option for them is still there on iTunes, however when I select them, I get the horizontal barber pole for a minute, then the speaker selction goes back to computer.
    In more detail:
    Previously I had a Comcast internet connection which went through a Linksys wireless router. My Mini picked up the internet with this connection. Then I had an Airport Express hooked up to some remote speakers. They worked fine. Now, I have the Verizon wireless router hooked in directly to my Mini through the ethernet cable. I see the wireless network created by the Verizon router. I still see the wireless network created by the Linksys router. However, my iTunes can not connect to my AE/AirTunes speakers.
    Note, I did reset the AE and then using Airport Setup Assistant, tried to locate it again, but it came up with nothing (other than my neighbor's new Verizon router).
    Any help would be appreciated.
    Thanks!

    Still no luck. The green light is on for the AE.
    Thanks in advance for the help.

  • Why my older Airport Express does not work with OS-X 10.9?

    After getting my new iMac and upgrading to Marveric, I can not get my older AirPort Express work. Why?

    Mavericks does not support the older "b/g" wireless versions of the AirPorts, only the newer "n" wireless versions.
    You can use another Mac running Leopard or Snow Leopard, or a PC to administer the older AirPort Express.

  • Airport Express A1088 Not Working With iTunes 10 AirPlay but works with iPad & iPhone

    Hi,
    I'm really hoping someone can help me. I have just got an ADSL connection at home and have started using my Airport Express I've had for years but haven't used, model number A1088. I can use the Airport Express to use AirPlay from my iPhone, iPod and iPad. iTunes 10 on my 2010 13" MacBook Pro recognises the Airport Express as an AirPlay device, however when I attempt to play music through remote speakers using the Airport Express as the AirPlay device I receive the error message "An error occurred while connecting to AirPlay device "emptyk86 Airport Express". The network connection failed". I have performed numerous hard resets and resets within the Airport Utility, to no avail. I could accept that as the Aiport Express is quite old now, that it could be broken, but as it works for all iPhones, iPods, and iPads I don't understand what I'm doing wrong!
    Thanks for your time.

    The same thing started happening to me this morning.  I have an old Airport Express, New MacBook Pro, recently updated to Lion, have the latest version of iTunes.  Everything worked fine until this morning.  I was playing music, stopped it, and when I tried to resume, got the error message. I turned evertying off and on and reset everything.  The problem persisted.  However, I had no problem playng music from my iPad library through the system using the iPad. 
    I have a remote app on the iPad and, oddly enough, found that I could play anything (playlists, songs, etc.) from the MacBook Pro iTunes library through the system using the iPad remorte app.  Once I had that running, I went back to the MacBook Pro and found I had full functionality with iTunes on the MacBook Pro.  I closed and reopened iTunes a couple of times on the MacBook Pro to test it, and found that sometimes it would work fine and sometimes I would get the error message.  When I got the error message, I went through the procedure with the iPad to get it going, and that worked most of the time.  When it did not work the first time, I found that playing a song from the iPad library first and then going to the remote app seemed to help. 
    For sure, this is more a workaround than a solution, but maybe someone who understands how these things work might recognize the problem and propose a solution.

  • I am considering purchase of Airport Express to extend / improve my network at home. I have read that AE will not work with a non apple set up. Does this mean my BT Homehub will not work with AE?

    I have poor router connection to my iphone in one part of my three storey home. I have a BT Homehub router. I am considering purchase of Airport Express to improve my network connection. Will AE function with the Homehub.  I have read that it may not! Any advice please?
    Geoff Snr

    The AirPort Express will work with the Homehub if you establish a permanent Ethernet connection from one of the LAN <-> ports on the Homehub to the WAN "O" port on the AirPort Express.
    The AirPort Express will not work if you are planning to connect the Express to the Homehub wirelessly to extend the network.

  • Updated airport utility will not work on older Airport Extreme

    I have a mid-2011 Macbook Air with OS 10.9.4. So that's up-to-date. I recently updated my Airport Utility to version 6.2. I have an old Airport Extreme. The new Airport utility will not work with the old Airport Extreme. Apple will not let me download the older Airport Utility, because I have a newer one installed: classic Catch-22. Any ideas? I need to find out my SSID to connect with a new Denon AVR receiver. Is there any way to find out my SSID with Airport Utility?

    You must first uninstall AU 6.2 before you can install an older version. This may be removed by the mods so get it while you can:
    AirPort Utility 5.6.1 on OS X 10.9 Mavericks | Corey J. Mahler
    Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is

  • AirPort Express will not extend Wireless Network

    Hello.  My airport express will not extend my wireless network.  It was green for about the first 4 hours and then I've had a flashing yellow light since that time.  I've reset it a bunch of times and even have the AE in the same room as my AP Extreme.  I complete the setup and then it continues to flash yellow.  Can ayone give me a hand?

    In the cases where the AirPort base stations would be interconnected by Ethernet you want to configure then for a roaming network, NOT an extended network. Apple uses the term "extended" when the base stations use wireless connection. Regardless of naming convention the end results is pretty much the same.
    The link I provided should provide you with the necessary steps to set this type of network up.
    If you need additional help, please start a new post as the solution for you will be different than the OPs. Thx!

Maybe you are looking for

  • Targetting a div on a page from an .swf file

    Imagine I have an swf file on an html page.   Beneath it I have a div called "container".  I would like to hit a button in the flash file and have the contents of the container div change.  I've done a similar thing with frames or iframes in the past

  • How to control the location of Iconified JInternalFrame?

    Is there any way to control the location of Iconfied JInternalFrame on JDesktopPane? I've searched API reference and tried to find suitable methods to override in UI classes. But I still cannot figure out how to do it after a long time. Who have any

  • Fetch Blob image from database and save in file

    Hi, I am using the following code to fetch a picture stored in database (blob type) $sql = "SELECT PICTURE FROM NEW_PICT WHERE SR_NO = 1"; $stid = oci_parse($conn, $sql); oci_execute($stid); if(OCIFetch($stid)) //if file exists $a=OCIResult($stid,"PI

  • Performance decrease with custom cell renderer

    Hi, Finally, I have my cell renderer working fine (it was simpler than I thought). Anyway, I'm suspecting something is not working quite well yet. When I try to reorder my colums (by dragging them) they move like slow motion. If I don't register my c

  • Rio evaluation

    Hello World.......... Hi i am just after getting my hands on an sb Rio and the labview evaluation kit.  the question i have it when i start on the tutorial it instructs you to open various vi's and it goes through some basic functions . This is where