Need help - N9 camera does not respond

The Nokia N9 does not alow taking photogrpahs indicatng that "Can't use the camera while you are connected to your computer". I have disconnected the usb cable from the computer using the normal procedures. Need help to get this corrected.

Hi, Buddhimarambe. Welcome to the Nokia Support Discussions! Have you tried to reboot the phone? Press and hold the power key for at least 8 seconds. To switch your phone on again, press and hold the power key. If the issue remains, you can try to restore the phone's default settings:
1. End all active calls and connections.
2. Select settings icon and Reset > Restore settings.
Note: After restoring the original settings, the phone switches off, and then on again. This may take longer than usual. Also, this will not affect your personal data. Let us know the outcome.

Similar Messages

Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?

Hello,I need help.ipad 3 does not support flash media player.which player must I download instead of flash media player?

Flash is not supported on the iPad - and as Adobe have announced that they are stopping development on all mobile versions of it, it probably never will be.
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

Ralph, help! (with "does not respond" message)

My mom said you were the go-to guy on this issue. We have been using iChat AV for video conferencing for about 6 months. Then I switched ISPs, from a cable modem to DSL. Have not been able to make it work since -- we get a "does not respond" message.
Where to begin? The router is the same; the internal firewall is off. Could it be something to do with the new modem, or the new isp? And I saw a recent post here about the November security update as well, so I am wondering if it's actually that.
Thanks in advance.
Juliette
iMac G5 Mac OS X (10.4.2)

Hi Juliette,
As Defcom says, if the modem can route and is not set to Bridge mode (if it can be) then you will need to open Ports.
If you have UPnP then use that as iChat can use this method.
Use Port Triggering if you have mutliple computers and no UPnP. Use Port Forwarding for links to one computer or router.
Only have one DHCP server on your network
Do not use Port Forwarding or Port Triggering twice (Or combo of them)
There is this on the Portforward.com site about Port Triggering for one version of a B90
http://portforward.com/english/routers/port_triggering/Westell/BellSouthB90-2200 30-04/iChat.htm
I would use this for Pics only as the info relies on the App this site promotes which is windows only and the details are wrong after that.
Local port 5678 need to trigger Global port 5060
Local port 5060 needs to trigger Global ports 16384-16403
Local 5190 Triggers 5910
Local 5222 Triggers 5220-5223 (jabber stuff)
Some Jabber logins are on port 5223 so
Local port 5223 triggers 5220-5222 if needed.
Ralph
Ralph

Need help Aperture 3 does not show thumbnails

Hello, after installing the Aperture 3, I found does not show thumbnails, tried to do everything he could, but nothing helped. Can anyone encountered this problem?

I've been having what seems to be permission related problems with previews. When you see no thumbnails, highlight all the images, right click on them and "delete previews", then "rebuild previews".
See if that fixes it.

I need help with my skype not responding. PLEASE H...

So Ive been having troubles with my skype for a while now and i havent gotten them to stop. Whenever i load up skype it just goes to a white blank window and doesnt respond until i end it in task manager. Any advice or help would be greatly appreciated as this has bothered me for a long time now.

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Re: Sorry but need help. Muse does not publish !

Hi,
can't continue my job. Muse is blocking the upload to publish the site under businesscatalyst.
Who can help me to fix that problem?
last upload of this file can be found under: http://iseki-neu.businesscatalyst.com/
Tks and regards
Siggi
The only available messeges are the following screen-shoots.
P.S. I wrote about the same problem already 7 hours ago.

Hi Steve, Thank you for your reply. I have Adobe Reader XI and Adobe Technical Communication Suite 5 installed. But based on your reply, I found these instructions for enabling the Adobe Acrobat or Reader PDF viewer for Firefox and Chrome. Here is the link: https://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html
The instructions work, so I am marking this question as resolved.

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Apple iPAD 2. Needs password to unlock iPAD; however there is a permanent keyboard displayed on the screen that does not respond to touch. iPAD switches on with button but does not turn off using it at moment. Can you help please?

Try a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears. See if that clears the glitch.

My mac camera does not work ! please help i need my camera for an interview !

my mac camera does not work ! please help i need my camera for an interview !

CLICKY CLICK---> http://support.apple.com/kb/HT2090 How to Troubleshoot iSight

Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need help

Originally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem

I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?

I need to run web based Microsoft CRM. I open it in Safari but the program does not respond. I suppose it has to do with Flash or ActiveX. Can someone help?

What does the product developer say about system requirements? If it needs to be run from within Internet Explorer then you'll need to find a way to run Internet Explorer. Boot Camp or VM installation of Windows would be two options.
But first check the product requirements.

HELP NEEDED. Plugin container stopped working / Script does not respond

Hi!
I am aware that there are numerous articles about this problem, but unfortunately none of them solves my problem.
Very frequently, at least once a day (usually from 3 to even 7 times a day) my Mozilla Firefox freezes and I am forced to restart it. It typically occurs when I try to open a page with some interactive content in it (youtube, some fancy flash pages, even gmail document preview). When I try to close it, Windows pops up a message saying that "Firefox stopped working" and terminates the application itself, and then another window pops up, saying "Plugin Container for Firefox stopped working". It's usually either that, but sometimes Mozilla also shuts itself without any warning and the same message appears.
As for "script does not respond", it does happen as well, although way more seldom. Usually it happens on the pages with lots of images. The whole browser then freezes for couple of seconds, then it pops up a window saying that the script does not respond and asks whether I want to force it to continue or not. It doesn't make any difference which option I choose because usually the browser crashes anyway.
I am using version 34 and I made sure all my plugins and addons are up to date. I also disabled hardware acceleration and tried to reinstall whole flash thing. I wonder whether it's the fault of one of my addons, but I admit I am not too eager to try and disable them all and then test it one by one because it would take up way too much time.
Apart from that, none of the previous solutions seem to help, and the problem really gets on my nerves because numerous times I lost a huge block of text I was writing. Now I learned to copy everything I write couple of times :/
Maybe the crash reports will help. I'll link them from the newest to the oldest (for some weird reason they are 3 crash reports from today, yesterday and 3 days ago - weird, because the browser has shut itself today at least twice, not to mention previous days):
https://crash-stats.mozilla.com/report/index/ba7f5087-3d7d-4b2c-b9b1-04e6d2150105
https://crash-stats.mozilla.com/report/index/72eaf792-5f06-445b-806c-cd7922150104
https://crash-stats.mozilla.com/report/index/c3f81ff8-df10-45a6-8400-1c5912150103
I'll be glad for any help because, honestly, I can't stand it anymore. No reinstalling of Firefox or restoring settings to default have helped me yet.

Hmm, that's pretty bad. Often if Windows is stepping in with the crash report, then the issue is with a driver incompatibility, most commonly a display driver.
Here are a couple things to try:
(1) Disable Firefox from using hardware acceleration
This is the traditional workaround. You can use:
"3-bar" menu button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
That takes effect the next time you exit and start Firefox up again, which the way you describe it, might be quite soon.
(2) Disable the Flash player plugin from using hardware acceleration
This is a separate setting. See this support article from Adobe: http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues
(3) Disable the Flash plugin's protected mode feature
Protected mode has security benefits, but is not compatible with all systems for some reason. It can stall scripts on some systems, for example. You can disable the feature by creating or editing a settings file. The following pages/posts provide different approaches:
* Adobe support article under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* Manual steps: https://support.mozilla.org/questions/968190?page=5#answer-509209
* Batch file to automate the manual steps: https://support.mozilla.org/questions/982093#answer-518078 (alternate version of Carm's batch file with a few changes by me: [https://onedrive.live.com/?cid=f7d304d92388737d&id=F7D304D92388737D!336&ithint=file,.bat&authkey=!AP2FXW2Y_3BXZyo])
Any improvement?

I just bought an Iphone4 from straight talk and my camera does not work. The shutter wont open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile and now that I have it, it does not work properly. Need help

I just bought an Iphone 4 from straight talk. My camera does not work. The shutter does not open and when it does open there is a black screen. I am very upset. I have wanted this phone for awhile. I want the issue fixed.
Thanks

Take the iPhone to an Apple store genius bar for testing, and if it is defective and under warranty they will replace. Since you say iPhone 4, was this a used or refurbished iPhone?

My ipod touch wont turn on i tried everything but it does not respond , I dont know what to do, please help me !

My ipod touch is not working i tried everything but i cannot turn it on. I was not using for about 2 weeks and I remember the last time I used it it was working perfectly but a day before today I tried to turn it on but i couldn't I tried by pressing both bottoms but my ipod does not respond ! I really need help !

See Here for
Frozen or unresponsive iPod touch
Make sure the Battery is Charged...
Also, Try This... You will Not Lose Any Data...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Is it possible to lock the camera so the screen does not respond to touch? Everything else works but camera screen seems frozen.

My camera screen acts like it is locked. Everything else on the phone is fine and I only have fourteen photo's on the phone, one day it worked and the next day the screen does not respond. Have I done something?

Hi there,
I would recommend taking a look at some of the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Hope that helps,
Griff W.

My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Help!

My iphone went blank and when I plugged it into outlet the screen shows the itunes logo and a picture of what looks like the charger. I tried to reset it and it does not respond. Can anyone help?

That screen means it has gone into recovery mode. You need to connect to a computer running iTunes by following the instructions in http://support.apple.com/kb/HT1808 for the procedure of recovery mode connection.

Need help - N9 camera does not respond

Similar Messages

Maybe you are looking for