Need help on applying PSU 9 patch on Grid and Rac

Hi Gurus,
Oracle Version : 11.2.0.2
Operating System : linux x_64
Here we got p14841385_112020_GI_PSU9Linux-x86-64.zip from applying PSU 9 patch on our four node rac.
Steps we follow.
1.) Bringing DB instance 1 and AMS instance 1 down.
2.) stoping Cluster on node 1 as root user
(crsctl stop crs -n node1)
3.) applying PUS patch.
My doubt in read me file is
•Case 1: Patching Oracle RAC or Oracle RAC One Node Database Homes and the GI Home Together
•Case 2: Patching Oracle RAC or Oracle RAC One Node Database Homes
•Case 3: Patching GI Home Alone
•Case 4: Patching Oracle Restart Home
•Case 5: Patching a Software Only GI Home Installation
•Case 6: Patching a Software Only Oracle RAC or Oracle RAC One Node Home InstallationHere we in bit confussion which case we need consider case 3 or case 5.
We are haing another PSU 9 patch for oracle also.
Please help me how to proceed .
Thanks & Regards,
Venkata Poorna Prasad.S

Hi Venkata,
Case 3 you need to being down complete database as it will patch all node of the cluster by reading cluster configuration files from Grid Infrastructure.
Case 5 you can patch each node locally keeping other cluster db nodes up
Thanks,
Ajay More
http://www.moreajays.com

Similar Messages

HT201269 hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone

hi i need help, i just go a new iPhone 5 and i want to put all my backed up stuff on, but it doesn't show on the list, how do i get all my stuff back and yes i did backup the old phone

Follow the explicit instructions in the article from which the thread was started and restore the device from the backup of the previous device.

Hi, I need help!. I will change my iphone and I need to move contacts from one iPhone to the new, what should I do?

Hi, I need help!. I will change my iphone and I need to move contacts from one iPhone to the new, what should I do?

You should have been syncing your contact with your computer all along. Just sync them from the computer to the new iphone.
iPhone: Transferring information from your current iPhone to a new iPhone

HT201269 I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone I purchased 2 weeks ago when my Iphone was stolen. I don't know how to get the money or music on new phone?

Need help with Itunes transferrs and can I use my Edge phone as a router?

I'm not a tech person, but need help with my Itunes account in transferring money and downloads onto new phone
Is this an iPhone?
Set it up using the AppleID you used on the previous iPhone.

Need help to find out link between process order and purchase order.

Hi All,
Need help to find out link between process order and purchase order.
We have purchase order, we can find out associated process order in MD09 (No Purchase Requisition found in Purchase order). When I tired to replicate this scenario with same material in system but not able to do.
Please suggest me what needs to check to get purchase order link to process order.. (this is not subcontracting )
Edited by: SAP PQ on Sep 26, 2011 5:24 PM
Thanks,
SAP PQ
Edited by: SAP PQ on Sep 26, 2011 5:24 PM

MD09 is pegging. In SAP pegging is dynamic, meaning that there's no fixed link between purchase order and process order in your case.
This is why you did not get the same result when you tried again later.
Such a link can exist only if you do direct procurement for the order.

I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set

I need help resetting my security questions, i try to and it says email sent but i never get the email to my main email or alternate email, i never set my questions but somehow there set, so i can also not buy apps without entering my question awnsers please help

Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions

Need advice: Accidentally applied the same patch twice

So I fumbled with my 10 PuTTy sessions and accidentally typed opatch apply in server that I had already patched. It asked me if the system was ready for patching and I hit "yes". It started "Updating" some files and in a bit of a panic I probably did exactly what I shouldn't have done... pressed ctrl+c to break the process. Should I be at all concerned? Should I...
- Reapply the patch (it doesn't do anything else but update more files)?
-Take the "updated files" from another recently patched environment and overwrite them in this one?
- Rollback the patch and reapply it?
- Leave it?
Any help would be appreciated. Thanks!
This about how far it got:
Is the local system ready for patching? y
y
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch 'REDACTED' for restore. This might take a while...
Backing up files affected by the patch 'REDACTED' for rollback. This might take a while...
ApplySession rolling back interim patch 'REDACTED' from OH '/opt/application/oracle/Oracle_IDM1'
Patching component oracle.oim.server, 11.1.1.3.0...
Updating jar file "/opt/application/oracle/Oracle_IDM1/server/apps/oim.ear/APP-INF/lib/iam-platform-auth-server.jar" with "/server/apps/oim.ear/APP-INF/lib/iam-platform-auth-server.jar/oracle/iam/platform/auth/impl/DBStore.class"
Updating jar file "/opt/application/oracle/Oracle_IDM1/server/apps/oim.ear/APP-INF/lib/xlScheduler.jar" with "/server/apps/oim.ear/APP-INF/lib/xlScheduler.jar/com/thortech/xl/schedule/tasks/tcEntitlementDeltaLoad.class"
Updating jar file "/opt/application/oracle/Oracle_IDM1/server/apps/oim.ear/APP-INF/lib/xlScheduler.jar" with "/server/apps/oim.ear/APP-INF/lib/xlScheduler.jar/com/thortech/xl/schedule/tasks/tcEntitlementsAssignmentTask.class"
Updating jar file "/opt/application/oracle/Oracle_IDM1/server/apps/oim.ear/APP-INF/lib/xlDataObjectBeans.jar" with "/server/apps/oim.ear/APP-INF/lib/xlDataObjectBeans.jar/com/thortech/xl/ejb/beansimpl/tcLookupOperationsBean.class"
Updating jar file "/opt/application/oracle/Oracle_IDM1/server/apps/oim.ear/APP-INF/lib/OIMServer.jar" with "/server/apps/oim.ear/APP-INF/lib/OIMServer.jar/oracle/iam/scheduler/impl/quartz/QuartzJob.class"
Edited by: user602387 on Feb 28, 2012 9:34 AM

Thanks for the response.
I actually ended up just doing an opatch rollback -id <Patch ID> followed by another opatch apply for that patch. Nothing seems to have gone wrong. I was worried earlier because I checked the md5 digest of some of the files and none of them matched up between environments with equal patch levels.

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

I need help with a backup file that was deleted and now undeleted from my hard drive

Last month (May 6, 2011), I was updating my iPod Touch 4G with the new software that came out. I always make a backup of my iPod's data before I update it. While my iPod was updating I left my iPod and computer alone and was doing things around the house with my mom. And when I was done I went in my room to see if it was done and my computer decides that it was going to freeze and crash on me (with my iPod plugged in and stuck on the updating or verifying software mode.) I managed to get my iPod back to working condition again but losing everything on my iPod. I formatted my computer hard drive but I managed to get back the backup I lost. I need help on getting the backup into iTunes so I can get my data back. I am not Jailbroken and I plan not to Jailbreak. I however saved the backup file in a folder other than the Mobilesync folder. I am also running on Windows XP. Someone please help me and thank you in advance!

I was able to backup my iPod and I tried to restore my iPod again and it goes through the process and everything but it restores the temporary data that I had on there. It didn't restore application data or the current photos and videos that I had saved in Camera Roll before this all had happened. It is almost like it goes back to factory settings but I have some photos that were saved on the other backup that I was temporarily running on. The backup that I am looking to restore is the only backup file in the Mobilesync folder as of right now the others are saved somewhere safe for right now. Why doesn't it restore my application data or my Camera Roll pictures and videos that I saved before my computer crashed last month? Can this problem be fixed?

Need help for creating sharepoint sites for both internet and intranet users

We would like to know what is the best approach to create SharePoint sites for our customers(internet users) and internal employees(intranet users) on the same SharePoint server. Here is the scenario:
1) A customer posts a document from internet.
2) This triggers a approval workflow that can only be accessed and executed in the intranet environment. This approval process requires approval's possible modifications to the customer's document.
3) We would like the customer not to able to check the approval state and the modified document until the document is fully approved and finalized.
We are pondering if we need to create two sites, one site for customer and the other site is for internal approvers. Or one site is possible. It also looks like we need to somehow copy customer's original document to intranet site and triggers the workflow.
Any design ideas are helpful. Thank you advance!

Hi Jason,
Though it is perfectly possible to have both intranet and internet on the server, it is not a recommended practice. Having both on the same server would have multiple problems, instead me detailing it out, here is a forum thread on which Trevor had given
enough reasons -
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/9b550c33-6f5f-4cd9-8762-8ff389b747d9/sharepoint-2013-one-farm-to-host-intranet-extranet-internet?forum=sharepointadmin
If you have valid reason to go with single server, then you can also explore email enabled lists as one option and another one would be using custom sharepoint designer workflow.
you can also try using event receivers to send documents to intranet site from internet site, process everything and update the document in the internet site.
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

30p with a Canon XA10 - need help with Final Cut 7 "FIELD DOMINANCE" setting and an explanation of "drop frames". Thank you!!

I shot footage using a Canon XA10 and there are issues with the HD quality not looking as crisp as it should. I am trying to make sure the settings in Final Cut are right. Need help confirming what should be in "Field Dominance" --- have seen discussions about making sure it's set to "none" but I'm confused as to what to do.
Also someone suggested I use "drop frames" to change from 30p to 24p within Final Cut. He couldn't explain how to do it so any input appreciated as well as any thoughts on whether this is a good option to try.

If you're shooting 30p, field dominance should be set to none. Since you need to use log and transfer to bring this material in to fcp, I would assume it would be set correctly automatically. Are you sure you've set the camera properly?
Drop frames will not change 30 p to 24p. Dropframe timecode simply refers to the number assigned to each frame which drops an occasional number (not any frames) so the timecode duration is the actual duration, since 30p videoi is actually 29.97 frames per second which each frame assigned a timecode number.
This is very basic video stuff and requires some basic knowledge of video. Wikipedia is a pretty good resource for much of this stuff plus there are lots of great resources on the web. Look up interlaced and progressive video, 24p and 30p.
And as far as judging quality, you can only get an accurate view of the quality in fcp when you have a video card attached to a video monitor. The viewer and canvas are only an approximation of what the quality is. Minimally, set the canvas or viewer to 100% to get a better approximation of the quality.

Hi I need help on my iphone I forgott my pasword and I disable it and it says disable connect to itunes what can I do please help me and I dont have.itunes account I only have an icloud account only please help

Hi I need help on iphone I forgott my pasword I disable it I only have an account with icloud only please help me

I'm not sure what you mean by "iTunes is not enabled" -- if you read the above link, the question is whether you've previously synced with the iTunes application on a computer. If you have, you connect to iTunes on that computer. If not, you follow the "Use Recovery Mode" procedure near the bottom of http://support.apple.com/kb/ht1212

Need Help for Page Design Technique: Level 0 Record and Level 1 Record

Folks,
Hello. I am developing HR system for a client. I design a page for "Position Information" as follows:
Level 0 record fields:
Position Number: 01
Status: Open
Because many people are in this position, level 1 record is a scroll area containing many rows belong to this Position Number as follows:
Level 1 record fields:
Profile ID: 001 effective date: xx/xx/xxxx
Profile ID: 002 effective date: xx/xx/xxxx
After save the page into Database, the data in Level 1 record table doesn't match the data in Level 0 record table.
No way to identify the rows of data in Level 1 record table belong to a specific row of data in Level 0 record table.
I need help to design the Database, that is 2 tables: many rows in second table belong to one row in first table.
Can any folks give some idea to design such a Database so that save the Page correctly ?

Table 2 should have all the key fields from Table 1, followed by atleast one more key of its own.
Subhash

HT1212 I need help restoring my ipad because on my computer and laptop it says that i can acuss my itunes withput knoing the pascode

I need help please text me as soon as you can becaus ei need my ipad and i forgot the passcode and everytime i hook it up to any computer it says i need to eneter the passcode to my ipad so i can use it on itunesbut i need to restore it to get a new pascode

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

Need help for hotspot linking from an ALV Grid to another transaction

Hi all,
I have to make a field in an ALV Grid link to a transaction. I activated the hotspot for the field in the field catalog and created a 'User_command' that i call in the REUSE_ALV_GRID_DISPLAY, but when i click on the hotpsot, it doesnot take me to the transaction. Please provide some help.
Here is the code:
*Internal table and work area for field catalog
DATA: i_fieldcat TYPE STANDARD TABLE OF slis_fieldcat_alv,
          wa_fieldcat TYPE slis_fieldcat_alv,
          v_repid LIKE sy-repid,
          wa_layout TYPE slis_layout_alv,
          i_event TYPE slis_t_event,
internal table and work area for subtotals
        i_sort TYPE STANDARD TABLE OF slis_sortinfo_alv,
        wa_sort TYPE slis_sortinfo_alv.
PERFORM prepare_fieldcatalog.
PERFORM prepare_layout.
PERFORM prepare_subtotal.
PERFORM display_alv.
FORM display_alv .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
   i_callback_program               = v_repid
   i_callback_pf_status_set          = 'STATUS'
   i_callback_user_command           = 'USER_COMMAND'
    is_layout                         = wa_layout
    it_fieldcat                       = i_fieldcat
   IT_SORT                           = i_sort
   it_events                         = i_event
    TABLES
      t_outtab                          = i_final
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " display_alv
*&      Form prepare_fieldcatalog
FORM prepare_fieldcatalog .
PERFORM f_build USING:
    c_bukrs text-011,
    c_gjahr text-012,
    c_lifnr text-013,
    c_ebeln text-014,
    c_ebelp text-015,
    c_dmbtr text-016,
    c_hkont text-017,
    c_wrbtr text-018,
    c_wmwst text-019,
    c_mwskz text-020,
    c_text1 text-021,
    c_kbetr text-022,
    c_spcode text-023.
ENDFORM.                    " prepare_fieldcatalog
*&      Form f_build
FORM f_build USING    p_c_fieldname TYPE slis_fieldname
                       p_text TYPE c.
CLEAR wa_fieldcat.
CASE p_c_fieldname.
    WHEN c_dmbtr OR c_wrbtr OR c_wmwst.
      wa_fieldcat-do_sum = 'x'.
ENDCASE.
IF p_c_fieldname = c_ebeln.
    wa_fieldcat-hotspot = 'X'.
ENDIF.
wa_fieldcat-fieldname = p_c_fieldname.
wa_fieldcat-seltext_m = p_text.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM.                    " f_build
*&      Form prepare_layout
FORM prepare_layout .
wa_layout-info_fieldname = c_rowcolor.
wa_layout-f2code = '<F2CODE>'.
*APPEND wa_layout to i_layout.
ENDFORM.                    " prepare_layout
*&      Form USER_COMMAND
FORM user_command USING r_ucomm LIKE sy-ucomm
                               rs_selfield TYPE slis_selfield.
CASE r_ucomm.
    WHEN c_back OR c_canc OR c_exit.
      LEAVE TO SCREEN 0.
    WHEN c_click.
      READ TABLE i_final INTO wa_final INDEX rs_selfield-tabindex .
      IF sy-subrc EQ 0.
        IF rs_selfield-fieldname EQ c_ebeln.
          SET PARAMETER ID c_bes FIELD wa_final-ebeln.
          CALL TRANSACTION c_me23n AND SKIP FIRST SCREEN.
        ENDIF.
      ENDIF.
ENDCASE.
ENDFORM.                    " USER_COMMAND
*&      Form status
FORM status USING    p_extab TYPE slis_t_extab.
SET PF-STATUS c_standard.
ENDFORM.                    " status
*&      Form prepare_subtotal
FORM prepare_subtotal .
wa_sort-spos = c_10.
wa_sort-fieldname = c_mwskz.
wa_sort-subtot = 'X'.
wa_sort-up = 'X'.
APPEND wa_sort TO i_sort.
ENDFORM.                    " prepare_subtotal

Hi,
Check this example..
TYPE-POOLS: slis.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: BEGIN OF wa_ekko,
ebeln like ekko-ebeln,
ekorg like ekko-ekorg,
ekgrp like ekko-ekgrp,
END OF wa_ekko.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
DATA it_ekko LIKE STANDARD TABLE OF wa_ekko WITH HEADER LINE.
SELECT * UP TO 100 ROWS
FROM ekko
INTO CORRESPONDING FIELDS OF TABLE it_ekko.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
     EXPORTING
          i_program_name     = v_repid
          i_internal_tabname = 'WA_EKKO'
          i_inclname         = v_repid
     CHANGING
          ct_fieldcat        = gt_fieldcat.
have hotspot for a PO.
DATA: s_fieldcat LIKE LINE OF gt_fieldcat.
s_fieldcat-hotspot = 'X'.
MODIFY gt_fieldcat FROM s_fieldcat TRANSPORTING hotspot
       WHERE fieldname = 'EBELN'.
Pass the program.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
     EXPORTING
          i_callback_program      = v_repid
          it_fieldcat             = gt_fieldcat
          i_callback_user_command = 'USER_COMMAND'
     TABLES
          t_outtab                = it_ekko.
      FORM display_detail                                           *
--> UCOMM                                                         *
--> SELFIELD                                                      *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
IF ucomm = '&IC1'.
    READ TABLE it_ekko INDEX selfield-tabindex.
    IF sy-subrc = 0.
      SET PARAMETER ID 'BES' FIELD it_ekko-ebeln.
      CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
    ENDIF.
ENDIF.
ENDFORM.
Thanks,
Naren

Need help on applying PSU 9 patch on Grid and Rac

Similar Messages

Maybe you are looking for