Need help on battery prob

I have a Zen Vision:M 30G and have not used it in about 8 months. Now it will not charge. Of course, it is now out of warranty. From what I can figure out I think I may have depleted the battery. If I order a new battery can I change it and is it difficult to do? I thought it could have been the charger but I tried it on another one and nothing. Thanks for any help!

Are you charging over USB, or do you have a seperate charger? How long did you leave it to charge for? If the battery is depleted, you might have to leave it charging for longer for it to pick up some charge.
Cat

Similar Messages

  • Need help saving battery

    Hi, I'm using i phone 4 and recently after updating the software 6.1.3, my battery is draining fast. It is almost 20% in one hour. I've tried all the suggestion, clearing the calendars, clearing the mail account. None seems to be useful. Please help....

    Morning victorian1234,
    For more information on this, take a look at this article:
    http://www.apple.com/batteries/iphone.html
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Battery life seems short
    Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
    Try turning iPhone off and then on again.
    Connect iPhone to iTunes and restore iPhone.
    If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
    Hope this helps,
    Mario

  • Need help with battery on Macbook A1181.

    I have a Macbook A1181, with removable battery. I just recently did a clean install, so not sure if I have to install anything for this and that's why it's causing problems?
    When I plug in the adapter I get a quick blue light then it stays orange. When I'm logged on it says (not charging) next to the battery icon. Then under Condition it says: replace now. When I first turned it on after the install it had a X through the battery icon but then 5 or 6 updates installed and I restarted and it's now giving me this problem above. Hoping something maybe needs to be re installed or something? Thanks for any help. Never dealt with Mac so clueless.

    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

  • I Need Help..battery dead...

    My Tungsten E2 is dead and I need a contact that is in there for my mother's funeral...I have tried charging it, but that doesn't do a thing.  What do I need to do to get it operational asap?
    Thanks!
    Post relates to: Tungsten T2

    Sorry to hear about your mother.
    If it's not turning on while connected to the charger, it has some serious problems.  Have you tried pressing the tiny Reset button on the back of the unit?  There was a thread about E2's failing to power on here:
    http://forums.palm.com/t5/Palm-OS-WinMo-Hardware/Is-your-E2-failing-to-Power-On/m-p/125094
    Has the device been HotSynced to a computer?  The contacts will be there in Palm Desktop!
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Needs help: x220 battery life ,6 Cell

    Last week ,I received my x220.IPS,i5-2520.
    But shortly I found that the battery life is too short.I have seen many reviews said that they tested their x220,and their machines will last for 7 hrs or more if just playing viedos or browse pages.
    And my poor laptop,if I only use it for internet iexplore and MSN,it will only last for 3 or 3.5 hours,the battery mode which I choose is energy saver,and the brightness or screen is 9,I don't know if there is somthing problem with my battery or laptop...
    And other thing is that when i charge my battery ,from 99% to 100%,it will take half an hour to comlete that ,although it display "charge will be comlete in 2 min."...
    I use the everest to test my battery ,and the battery consumption is 0%,but the designed capacity is less than the full charge capacity....is that normal?
    Plz help me .....LoL....

    Screen brightness 9 is pretty bright and will drain the battery quicker but off hand something fishy does seem up with your battery.   Hopefully someone else will know more
    ~Novak
    X220~i5 2520M~8GB~Vertex2~IPS~Win7Prox64~ It's amazing.

  • I need help quick - battery and data - solutions please?

    I have an iPhone 4 here in Canada on the Telus network.I have upgraded to iOS6. The last 4 days the battery has been draining very quickly, by 2pm its less than 10%. The phone is also getting very hot. Today I received a message that I have used 95% of my 1 GB of data, a message I have never seen before.
    So far I have:
    -turned off almost all notifications
    -turned off locations in almost all apps (maps of little value without it)
    -changed from push email to fetch
    -deleted all recently added apps
    Any thoughts on how to rectify the issue?

    To start with, the SprymenuBar is not suited for touch screens, it will not work.
    You are better off using a jQuery or a commercial menu.
    Even then, you must provide the styling rules for the different widths. Fixed widths, such as those in the SpryMenuBar are a no no.
    Have a look here http://www.projectseven.com/products/templates/pagepacks/css-builder2/index.htm to see what happens when you go to narrower screens sizes or here http://foundation.zurb.com/page-templates/homepage-1.html. The former is a commercial product, the latter is free of charge.

  • Need Help for Battery Problem!!!

    Hi! Everybody.
    After leaving my iBook G4 for a few week, The battery is getting worse. The problem is when i fully charged the battery and it shown 100% on the battery icon, there was only one light and flashing on the back of the battery and the computer can run normally only 15 minutes. Are there any solution or suggestions before i buy a new battery?

    Probably not. I'm having the same issue.
    Reset PMU
    Recalibrate battery
    Run coconut battery or istat widget to check health.
    Save some coin.
    KJ

  • Need help Iphone battery??

    Hi
    All this is what is up I put my iphone on 2 day and the iphone battery is not showing on my stand by screen?Would just like to know if there is away of me getting it back so it shows on the stand by screen.The icon in the top right shows but the big green neon icon does not show I do not know why that is?.

    Jailbreaking is replacing the iphone software with a modified version, but apple does not approve of this process and it voids your warranty.
    The big green neon icon only shows while you are charging, while the one in the top right is always there like any typical phone has the battery, signal, time, etc. at the top. Apple does not offer any way to make that stay there beyond charging at this time.

  • Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

    Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

    You could try a SMC reset:
    http://support.apple.com/kb/HT3964
    If no change, do what Allan advises.
    Caio.

  • Need help with modifying IDS Sensor in WLC; Null Probe Response problem.

    I need help in figuring out how to handle a NULL Probe Response report we are getting from our WCS.
    We are getting the following alert from our WCS:
    1. Message: IDS 'NULL probe resp 2' Signature attack cleared on AP 'XXXAP_#2' protocol '802.11b/g' on Controller '161.201.97.8'. The Signature description is 'NULL Probe Response - No SSID element'. - Controller Name: XXX-XXXX-XX
    And
    1. Message: IDS 'NULL probe resp 2' Signature attack detected on AP 'XXXAP#2' protocol '802.11b/g' on Controller '161.201.97.8'. The Signature description is 'NULL Probe Response - No SSID element', with precedence '3'. The attacker's mac address is 'ac:86:74:1e:15:5f', channel number is '5', and the number of detections is '1'. - Controller Name: XXX-XXXX-XX.
    Is this something to be concerned with in terms of a potential attack, or should I ignore these types of emails?
    According to a previous post here: https://supportforums.cisco.com/discussion/10731846/wireless-system-has-detected-possible-intrusion-attack-signature    I need to modify my IDS Signature folder in the WLC. I have no idea how to modify the file itself into the format needed to prevent these intrusions. Could somebody please help me correctly enter the right format needed for this file, or correct me in my thinking. I assume I'm in the right direction but if anyone has further information that could be helpful it would be greatly appreciated. Thanks in advance.

    The IDS signatures are stored in a file called wlc-sig_std.sig. That file can be edited via GUI by navigating to Security > Wireless Protection Policy > Standard Signatures. The links that you shared contain links to Cisco documentation that leave out the important parts of the documentation. The only way to get that documentation is to pull the existing signatures from the WLC using Commands > Upload File. Read that file for details on the syntax, then adjust your values in the GUI. I've attached a text document with the standard signature file.

  • I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

    I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

    Restore iPhone with iTunes on your computer.

  • Need Help About AC or battery or pc :(

    Hello!
    i am kinda new to the forum,i have GT70 2pe dominator pro laptop(bought from ibuypower) When i play demanding games,my ac unplugs itself from the laptop i dont know what to do ,i updated ec,bios,did the ec reset,battery calibration(from msi support page), but i did these long time ago i dont know if this started then or the problem was already on pc when i bought it,i didnt test playing demanding games before i did those things
    I tried playing w/o battery sometimes when the game loads laptop shuts down
    So i really need help..? 

    i think i have the correct model,well if it is going to fail can i use it until i buy a new one 2 weeks later?,i mean is this going to do harm to my computer until i get a new one?
    Thanks for the help  (sorry about the full sized picture)

  • I need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    i need help replacing a battery in my ipod nano 4th geneartion 16 gb can someone help me with step by step instructions or help me send it to apple store and replace and if so how?

    Here is how to do it yourself.
    http://www.youtube.com/watch?v=2h53otOBTsI
    Here is how to send it to apple.
    http://www.apple.com/support/ipod/service/battery/
    Hope this helps!

  • I have tried to upgrade my iPod touch , and cant even remember to which iOS  , and it didnt respond with the upgrade and does the loading logo until the battery life is gone. I tried restarting it doesnt work. NEED HELP

    I have upgraded my iPod touch and it didnt respond to the upgrade. Cant remember which iOS i was upgrading but when i try to switch it on the apple logo comes up but than it just goes to the loading logo until the battery life is gone. I have tried restarting it , that doesnt work. I need help i am lost without my ipod please help. Any ideas besides restarting it ?

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • I am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to

    i am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to turn off the computer and there was no case

    i am john and I need your help yesterday bought a program called DJAY when I finish the download and got an error opened and I saw him there was no case to install and thank you for your help anyway

Maybe you are looking for

  • Hi problem with search help?

    Hi friends,                i am creating a search help for one of my inputout field of name Zabc-Formno present in my screen. If have created a search help ZSH and assigned for that input/output field. Search help is working. My problem is in input/o

  • Interactive Reports - Scheduling

    I am using the Interactive Reports with BI publisher as the report server. I know in BI publisher you can schedule reports to run, but I don't want my users to go into it. Is there any way you can schedule an Interactive Report to run thru the APEX f

  • Mixing Video with Music

    Hello. I am new to iTunes. I own a PC and normally use Windows Media Player for songs and music videos. I create playlists in Media Player which contain both songs and videos mixed together and play them in full screen for gatherings in my home as my

  • Having issues with Simple FTP configuration

                       I am attempting to set up FTP behind this new CISCO ASA 5510 we just bought. I haven't configured a cisco device in 5 years, so I am having issues., i think i am close, but need a little help to get me over the hump. If I FTP from

  • My iphone don't turned on the Wi-Fi

    Please, I don't acess to wi-fi