Need Help on Blackberry Hub

I am a student in college, and I am using gmail to control my department mail, since our department mail doesn't really exist. In gmail, I can send email to others by my department mail address, however when I use blackberry hub to reply email or send email, i can only send from my gmail instead of my de[artment mail, which is really bothering me for most cases the email I sent would go to junkbox if I don't send from department mail.
Is there any way I can sync send emails from both of the address shared in one gmail?
Thanks
-XZ

Do you have media/memory card installed in your PC? For playing music files you better have a media card. Once you install a media card in your device then connect your device with PC/Laptop via USB cables you'll have popup for media card files. Put all you music files in Music folder of yoru media card.
tanzim                                                                                  
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Similar Messages

  • Need Help! Blackberry 8300 Keyboard Locked-up

    Need Help!  Blackberry 8300 keyboard locked-up.  Trackball can scroll but cannot activate programs. Cannot use keys to answer phone, activate programs, etc.  I have taken battery out to reboot/reset but no luck.  Any help/suggestions would be greatly appreciated.  Thanks! 

    What version of iTunes is on the computer?
    You may need iTunes 10.5 or later. That requires OSX 10.5.8 or later.
    You will also have to place the iPod in Recovery mode in order to allow you to restore the iPod.
    iOS: Wrong passcode results in red disabled screen

  • Need help from Blackberry - Can't register 9860 in BB network.

    Yesterday I have bought a 9860 torch from an online auction site in Romania. The phone is looking great, working great, except I cannot register it on the blackberry network, in order to use an internet data plan. As soon as I turned the phone on, the yesOPTUS carrier logo appeared on the screen, indicating that this device once belonged to someone in Australia. My carrier is Orange Romania and I am using it on a pre-paid SIM card with the "blackberry unlimited 4" internet option that Orange offers in Romania. When I try to go to Host Routing Table in the phone's menu, there is nothing displayed there. I tried to send the registration message and remove the battery (while the decice is ON) and put it back in, with no result. I have spent a day on the phone with the data plans support team at Orange Romania, virtually troubleshooting every possibility to connect the device to the bb network - they even created a bb access point specifically for my phone number - everything without result. When I tried to create a blackberry account on blackberry.orange.ro with my PIN and IMEI, the page replied that my account is disabled and that I should contact my carrier. Which I did. And they said that I should either talk to Blackberry or yesOPTUS, as there is a possibility that my device is already registered with the BB network on the yesOPTUS, from it's first owner back in Australia, and that my PIN may need to be erased from a database in order to be re-synced with my carrier. The way I see it, it's either that, or Orange does not carry the 9860 in their network (yet?). The certain fact is that I ended up with a beautiful device that I can't use to it's fully potential. Any help from Blackberry is fully appreciated. Thanks.

    irelative wrote:
    When I tried to create a blackberry account on blackberry.orange.ro with my PIN and IMEI, the page replied that my account is disabled and that I should contact my carrier. 
    Optus is in the only one that can remove the PIN/IMEI from their system. You need to contact them.
    If the device has been reported lost or stolen, they won't remove it.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need help regarding blackberry symbols

    i have blackberry curve 9220 few days back my cell got spoiled and reload software error came so after reloading and installing back os 7.1 on my curve 9220 few symbols such as crown ans music symbols ( the one available on apps such as jingu or fancy characters ) became black box i tried a lot but they seems to be jst blackbox now .... bbm users having such symbols inserted in their name became black boxs and now i need help what should i do so bring such symbols again ?????? 
    example : see this link 
    https://www.dropbox.com/s/mqhpk08fjfclb4m/s13_05_2​1__17_32_38.jpg
    so as you can see in the image that in the bbm this people had crown in their names and its appearing just a black box 
    please help !

    Hi There,
    I believe these icons are not compatible with BB OS 7.1 on your device which happens with most such symbols that are from other instant messaging applications. Were they visible before on the OS 7.1? I am also thinking the change could have come from your BBM if you updated it to newer version.

  • I need help with BlackBerry 8820's bluetooth issue

    Hi!
    Please accept my appology of my poor English.
    My 8820 has a bluetooth issue with Bluedio E9+ headset. It must be note that the headset works well with another phone (not BlackBerry). My BlackBerry can't actively connects to bluetooth headset by the method 'Menu' key > 'Connect' option, but still able to receives connection request from the headset and pairs with the headset when i choose Yes. At this point I can use bluetooth function for data transfering, Voice Dialing and music playback (i.e. mp3 files). But each time I try a mp4 file with default video player in Media folder, its audio will never work with the bluetooth function, and the phone's speakers is automatically enabled. I try the menu when the video was playing, but there are only Activate Handset and Active Speakerphone options. Then I was converted the file with BlackBerry Video Converter Pro; I remove and reinsert the battery; I wipe the phone and install new ROM,... But none of them work.
    Please help!
    TheME® ToanDuong™
    Copyright © 1986-2015.
    Mama MiraTech, Co. Ltd.
    All rights reserved.

    This was an unintended result of an intentional change to fix how Premiere Pro handles spanned MXF clips. To learn a bit more, please consult this thread: http://forums.adobe.com/thread/1358012?tstart=0
    Look for the workaround recommended by PPRO developer Wil Renczes.

  • Need help with open hub

    Hi eveybody,
             I was trying to wok with open hub. Created infospoke, destination i gave was a csv file named d:/openmara.csv path, saved and activated the info spoke. I went to d:/ to view the uploaded files, two file was created, when i try to open a file it says "unable to read" , when i tried to open the second one i could open the file and see some datas but not in a correct format, why is that?
    Then i tried to load the data in database, so in the infospoke i selected the option for destination as database,saved and activated the infospoke, now where should i go to see the uploaded datas physically?
    Could anyone help me with this.
    Thanks,
    RR.

    Hi,
    Thanks for the reply. I created a infospoke and destination was database option. Opened the se16 gave the table name which starts with /bic/....(please correct me if i am wrong),then the initial screen of se16 came up with all the fields , but when i executed it, the table is empty.Could you say why it is happening.
    Thanks,
    RR.

  • Please I need help for blackberry 10

    I have blackberry 10 z and I try to restore to the Factory settings but I can't its give me the picture all time Hanging now I can't use the mobile 

    So I take it that you have used both suggested methods.  And of course I am assuming that you have exhausted your service provider.  This hanging message is strange.  When you plug it in and link to link does it not give you the option to restore to factory settings? Maybe try removing the'BB Link' - un-install  and then after a little while go onto the official site and reinstall it.  I'm sure that you have tried a battery pull. If not then do not turn off the handset but pull out the battery in the middle of the program.  Also, do the same to the PC or MAC.  failing all these methods I have exhasted my knowledge in relation to restoring a phone back to factory settings.  Speak to you service provider and have them send you out a new handset.  I am a simple BB user.  I love the phone and believe that in the future all these probs we are facing will be ironed out in time.  I am sure there are other users that may be able to help you futher if my methods do not help.  Let me know  :-)

  • Need help on USB hub for mac air 13 inch (2 external hardisk and Iphone)

    Hello everyone, I am a new macbook air user, and currently using 2 external hardisk of 1TB and 2TB. I am looking for usb hub that support both of my external hardisk, ethernet and iphone too. The problem is, limited usb hub for mac air and bad review on balkin product, any advice for me?
    One more thing, I just moved from window to mac for the first time, and bought Western Digital 2TB external hardisk, the problem is, I can't save any video/audio file that I downloaded from internet in macbook to be transfer/move to this WD 2TB external hardisk, except for back up and time machine. It refuse to except any file that I try to move in to the external hardisk Can anyone help me? compactibility problem?

    First, I have not found any of my hubs to have an issue with my MBA. Just make sure that if any peripherals you attached to the hub are adequately powered. Either by having the hub independently powered, or the devices having their own power supply.
    The drive problem you have may be due to the file formatting. If this drive is formatted NTFS, then in many cases you can write to it using a network protocol, but OS X can't write to it if attached directly to the computer, e.g. USB, SATA, FireWire. You will neeed to either format the drive as a HFS+ drive, or use software that enables OS X to write directly to t a NTFS formatted drive, such as NTFS-3G. DISCLAIMER: As the information you provide for your circumstances is limited, this is but one suggestion amongst many, that explain your situation.

  • NEED HELP WITH BLACKBERRY Urgent!! Please

    Hey guys well when I plugged in my blackberry into my desktop manager it told me to update the device software and I did and it started installing it. But then towards the end its just stopped all of a sudden and said fatal error and my phone was left like this.  I didn't touch it all while it was installing it please help!!
    [IMG]http://i296.photobucket.com/albums/mm173/elsantaclause/DSCN0474.jpg[/IMG]
    [IMG]http://i296.photobucket.com/albums/mm173/elsantaclause/DSCN0474.jpg[/IMG]

    Hi and Welcome to the Forums!
    Wow -- I've never seen that screen. Not at all sure what it even means. But, here's a process that I once found for recovering a bricked device...I've never had to use it, so I can't vouch for it's correctness...but at this point, what have you got to lose?
    http://adlen45.activeboard.com/index.spark?forumID=123568&p=3&topicID=18834966
    Hope it helps.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Need Help for Blackberry passport

    OK, thank you. I therefore recommend you attempt an OS reload via the unofficial methods, which are cleaner, and allow you to choose an OS version that perhaps your carrier (or whoever it is controlling your offers) has been slow to approve:http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...http://forums.crackberry.com/bb10-leaked-beta-os-f395/bb10-os-archive-943672/Of course, before you started any of this you hopefully already took a good backup via LINK, a manual copy of your Device Memory to your PC, and full documentation of your configuration (account credentials, added apps, configurations, etc.). Sometimes, restoring from a backup returns to the device the very corruption one needs to eliminate, and reconfiguring from scratch can resolve that.

    Hello,danielbcrossman wrote:
    Passport will not update using Blackberry link on my computer. It goes for about five minuites until it is about 6% loaded and then gives a software failure message saying there was an errorWhich part of that is the exact and complete error message please? It is difficult to parse between what you are saying and what you are quoting. Better still, you can try looking up the error message in the public KBs:http://btsc.webapps.blackberry.com/btsc/microsites/microsite.dodanielbcrossman wrote:
    Seeking to download ver 10.3.1.2.2708.There is no such 5 octet version...all BB OS's are 4 octets, never 5. The unofficial AutoLoader methods, which are more "forceful", are already posted above in post 8 of this thread. If you do elect to use the unofficial methods, then you need to be aware of the difference between Software Release and OS level. Refer:http://btsc.webapps.blackberry.com/btsc/microsites/microsite.doThe official methods use SR, but the unofficial methods (as well as most discussions here with others) all use the actual OS. Further still, if you are seeking 10.3.2, then do be aware of the mandatory "anti theft" feature which is included in that branch. You must know your BBID credentials...if not, you can render your device useless, even to you. Good luck!

  • Need help in open hub

    Hi All ,
    We have a NetWeaver2004s system and want to transport data from a cube to an internal db table in open hub . We have succcessfully created the open hub and connected it to the cube . Using DTP we have made the connection and the db table but unble to schedule the data into the db table . can you please suggest as how to schedule the data into the db table from the info cube using open hub ?
    Thanks

    Hi,
    Thanks for the reply. I created a infospoke and destination was database option. Opened the se16 gave the table name which starts with /bic/....(please correct me if i am wrong),then the initial screen of se16 came up with all the fields , but when i executed it, the table is empty.Could you say why it is happening.
    Thanks,
    RR.

  • Blackberry Hub

    Hello, sorry for my english, I'm french, and I need help:
    My Blackberry has decided yesterday to stop. I turn it on, and all the apps were messy, not in order.
    More, the blackberry hub was loading and loading, and it never ends...
    It stills load now, and I can't received message, can't connect to the wifi, can't do anything but calling people or sending message, but passing by the contact app, not the hub...
    Thank you

    @arthur72 offered some solid advice.
    Just let me add that if you're ever having issues with your Hub, you can reset just the Hub without resetting the entire phone. To do this, go to your Hub then swipe down diagonally from the top right corner to the center of the screen four times in a row. This will reset the Hub but will not affect the rest of the phone.
    Cheers.  
    Si t'es plus comfortable avec le francais, vas-y en francais puis on te repondra quand meme.  
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Getting a new iMac - overwhelmed w info here but need help

    Hi,
    I'm getting a new iMac next week and need help with Blackberry Bold 9000 issues and syncing with iCal, etc on the machine.  I have been told that I can buy an app for about $30 that will sync the BB with the mac programs but reading here, I am confused - are some of the posts here and the KB notes related to syncing directly with the mac software or are they only for making a separate BB desktop for the mac?
    I have looked at several of the KB notes but I haven't found the answer yet.
    thanks.
    marcelcat
    Bold 9000 owner since Feb 2009

    What’s the difference between:
    8GB 1066MHz DDR3 SDRAM - 4x2GB http://Add $200.00...
    (from 4GB 1066MHz DDR3 SDRAM - 2x2GB)
    and
    8GB 1066MHz DDR3 SDRAM - 2x4GB http://Add $600.00
    4GB DIMMs are at present significantly more expensive than 2GB DIMMs. It's your choice whether to pay the extra money and have empty slots available for additional future memory expansion (without removing any existing memory).
    I presume 2.8GHz Quad-Core Intel i7 is bigger, or more powerful than the 3.33GHz Intel Core 2 Duo of the 21.5” iMac model. Correct?
    Generally yes. You can see benchmarks on places like Barefeats if you want to see comparison numbers.
    it appears the CD/DVD problem thing is not evident in the 27” model as it at least was in the 21.5” model. Right?
    I can't add anything to what I said on the subject previously.
    cracked screens upon opening the box of the new computer, were much more of a problem for the bigger, 27” models that the 21.5” models. Hopefully, Apple has taken care of that by packaging them more carefully.
    I haven't seen a report of any cracked screens in several weeks now. But with the gorillas the shipping companies tend to use, there are no guarantees. I once received a pallet-load of computers that the trucking company had driven a forklift blade through. So you never know how your computer might arrive. The prevalence of problems seems to have been alleviated, though.
    Regards.

  • Help with blackberry I.d. on my phone

    Need help with blackberry id on 9860. I changed my email address and password online to reset it. Now I cannot access apps or update features as it just keeps locking me out. Not sure how to correct this or change it on my phone, I went to options, then device typed in the new info still nothing. Need some advice as it's been this way for a while not able to access apps etc or download. It's frustrating can someone advice please. T  Thank you

    Hi jspooner
    Welcome to BlackBerry Support Forums
    Why did you Change your Username or email and password , are you having any issue with it ? Did you upadate your email in BlackBerry ID website ?
    If you still remember your old BlackBerry ID and password then try this Knowledge Base to Change or Update your BlackBerry ID username :
    KB28060 : How to change or update a BlackBerry ID username on the BlackBerry ID website
    Try it and let us know if you recieve the same error or any error message.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Need help to import and syncronize HCM pagelets with Interaction Hub, how can I do that?

    Hi,
    I need help to import and synchronize HCM pagelets with Interaction Hub, how can I do that? The default page "Select Remote Content" of the WorkCenter "Unified Navigation WorkCenter" is not working as well, when I run the import/sync button I get the following error message:
    Integration Gateway: General Connection Failed (158,10836)
    This error is thrown when there is no valid response.
    Possible errors include:
    Bad gateway URL
    Sync Service Timeout set and Service actually timed out.
    Java exception thrown - Check Application Server for possible Java exception

    Do you have integration configured between the two systems?  It sounds like you don't from the error.  Here is a walk-through on setting up Unified Navigation although it assumes you have integration already working.  If you haven't done that, it's documented a hundred different places.
    http://remotepsadmins.com/2013/03/04/peoplesoft-unified-navigation-with-peoplesoft-applicatations-portal-interaction-hub/

Maybe you are looking for