Need help on Crosstab in WebI 4.0
Hello All,
I need help on how to arrange the Crosstab to have the below in WebI. The data is in InfoCube is at 0CALDAY & 0CALMONTH.
The Cost & Quantity of the system date (7/7) should be displayed and the averages will be for that Calendar Month (07/2014).
While creating the Crosstab, I kept the Product Category & Plant on Horizontal Axis and it displays as expected, but how to
arrange 'Cost on system date 7/7', 'Average Cost', 'Quantity on system date 7/7' and 'Average Quantity' fields in Crosstab.
First I tried by keeping them on Vertical Axis and it didn't work. Later I tried by keeping them in Body Axis also it didn't work.
How could I create the WebI to display like the below, please ?
Thanks,
Venkat.
Hi Venkat,
I guess you are using Text variables to get cost(on 7/7).. and you have 4 different keyfigures.
Use below structure to get the desired output .
You need to hard code your keyfigure texts in webi .
Drag cross tab.
place product and plant in horizantal axis.
in first row add ="cost on" + formula to populate calday and cal month
Right click -> Insert row below . add Avg cost....
Similar Messages
-
Need help accessing the router web page. I have been tol...
Need help accessing the router web page. I have been told my router is acting like a switch and the IP address is not in the proper range. I have tried reseting the router (hold for 30 sec and unplug for 5 mins). Didn't work.
thanksWhat router are you using? Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS (not the WRT54GS).
You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 01-21-2008 04:40 AM -
Need Help/Advice with Photo Web Gallery coming from SQL Database
This is my first attempt at a database driven website. I assume what I am trying to accomplish should be fairly easy for more experienced but I am stuck at this point.
First, let me explain what I am trying to accomplish.
I want to create a thumbnail photo gallery displayed in columns and rows. I want to be able to hover over or click on the thumbnail image and have a lightbox script display the image over the thumb page. I am developing locally right now with intent to upload to the hosting site upon completion.
I am developing with ASP vbScript pages. I have an SQL database where the paths to the image thumbnails and pictures are stored in a table. On the gallery page, I have created a div tag to hold my image recordset. Within this div, I have inserted 3 absolute positioned divs to hold the pictureID, the pictureName and the image inserted as a datasource. I then inserted the information from the bindings panel of my recordset. Last, I used a horizontal looper extension from Tom Muck to get the thumbnails to display in columns and rows. Everything works up to this point just fine.
Now, I want to be able to hover or click on a thumnail image and have it displayed in a lightbox. I downloaded and used a javascript called Lightbox 2 which contains 3 javascript files and a css stylesheet. I inserted the files into the head tag like instructed to but could not get things to work properly. Here is where I need help. Currently, I am clicking on the thumbImage binding within the image Div and creating a link holder. I am then binding the larger pictureImage to it with the a.href selected in the bind to. I am then adding the command to call the lightbox javascript. Now, when I test my page, my thumbnail images do not show up (my alt text does in its place) but the links are in place and you can click on the alt text and it will return the correct larger image, but not in the lightbox, just in a new window with no styles.
Am I going about this correctly? Can you use lightbox scripts with data-driven galleries? Does anybody have any suggestions of what I may be doing wrong or missing? Are there better ways to go about accomplishing this?
Any help would be appreciated as this dynamic data thing has my head spinning. Although I know a database is needed to simplify the update and maintenance of the photos while allowing them to be searchable by keywords and tags also set up in the database.
ThanksAs I explained, I am developing locally a the moment. I will see about getting the databased moved up to the hosting server and then provide a link for an example.
In the mean time, can you or anyone else explain a way that you would go about displaying an image thumbnail photo gallery laid out in rows / columns, with any lighbox script that would overlay the larger image over the existing page instead of opening a new browser window?
I don't have to use the method I tried to describe.
In all of the lightbox examples I have looked at thus far, they give instructions on how to append that javascript to a single static image or a group of static images, not images from a datasource. That is where I am getting confused.
Don't know if this will help or not but please see code below:
Javascript and CSS positioned in head tag
<!--beginning of lightbox script with css -->
<link href="CSS/lightbox.css" rel="stylesheet" type="text/css" />
<script src="Scripts/protype.js" type="text/javascript"></script>
<script src="Scripts/scriptaculous.js?load=effects,builder" type="text/javascript"></script>
<script src="Scripts/lightbox.js" type="text/javascript"></script>
<!--end of lightbox script with css -->
Calling for javascript in the galleryimage div when hovering over thumbnail image
<!--beginning of gallery div -->
<div id="gallery">
<p>
<!--beginning of galleryImage div -->
</p>
<table width="400" border="0" align="center" id="galleryNav2">
<tr>
<td width="100" align="center"><% If MM_offset <> 0 Then %>
<a href="<%=MM_moveFirst%>">First</a>
<% End If ' end MM_offset <> 0 %></td>
<td width="100" align="center"><% If MM_offset <> 0 Then %>
<a href="<%=MM_movePrev%>">Previous</a>
<% End If ' end MM_offset <> 0 %></td>
<td width="100" align="center"><% If Not MM_atTotal Then %>
<a href="<%=MM_moveNext%>">Next</a>
<% End If ' end Not MM_atTotal %></td>
<td width="100" align="center"><% If Not MM_atTotal Then %>
<a href="<%=MM_moveLast%>">Last</a>
<% End If ' end Not MM_atTotal %></td>
</tr>
</table>
<p> </p>
<table align="center" id="HorzLooper">
<%
startrw = 0
endrw = HLooper1__index
numberColumns = 5
numrows = 5
while((numrows <> 0) AND (Not rs_ssfGallery.EOF))
startrw = endrw + 1
endrw = endrw + numberColumns
%>
<tr align="center" valign="top">
<%
While ((startrw <= endrw) AND (Not rs_ssfGallery.EOF))
%>
<td><div id="galleryImage">
<div id="galleryThumb"><a href="images/pic/<%=(rs_ssfGallery.Fields.Item("picture_url").Value)%>"rel="lightbox"><img src="images/thumb/<%=(rs_ssfGallery.Fields.Item("thumb_url").Value)%>" alt="<%=(rs_ssfGallery.Fields.Item("alt_url").Value)%>" /></a></div>
<div id="galleryImageID"><%=(rs_ssfGallery.Fields.Item("picture_ID").Value)%></div>
<div id="galleryImageFamily"><%=(rs_ssfGallery.Fields.Item("family").Value)%></div>
</div></td>
<%
startrw = startrw + 1
rs_ssfGallery.MoveNext()
Wend
%>
</tr>
<%
numrows=numrows-1
Wend
%>
</table>
<p> </p>
<table width="400" border="0" align="center" id="galleryNav">
<tr>
<td width="100" align="center"><% If MM_offset <> 0 Then %>
<a href="<%=MM_moveFirst%>">First</a>
<% End If ' end MM_offset <> 0 %></td>
<td width="100" align="center"><% If MM_offset <> 0 Then %>
<a href="<%=MM_movePrev%>">Previous</a>
<% End If ' end MM_offset <> 0 %></td>
<td width="100" align="center"><% If Not MM_atTotal Then %>
<a href="<%=MM_moveNext%>">Next</a>
<% End If ' end Not MM_atTotal %></td>
<td width="100" align="center"><% If Not MM_atTotal Then %>
<a href="<%=MM_moveLast%>">Last</a>
<% End If ' end Not MM_atTotal %></td>
</tr>
</table>
<!--end of galleryImage div -->
</div>
<!--end of gallery div -->
Thanks for any help or suggestions. -
Need Help with a Flash Web Project
Hello, everyone. I am trying to use Flash to make a two-step
system. I want the flash document to, first, allow a person to
upload multiple image files and then, second, for the flash
document be able to create a slideshow with the uploaded images and
fade in and out from each image until the slideshow is over. I want
it to be where the flash document creates its own slideshow with
the images that are uploaded in the first step that I mentioned. I
want it to do it completely on its own so I need to know how to
give it the proper AI so that it can do this task.
So, are there any tips that anyone has on how to do this? Can
anyone tell me exactly how to do this? I really need help with this
for my new website project. Thanks in advance, everyone!The problem with the text not appearing at all has to do with you setting the alpha of the movieclip to 0%. Not within the movieclip, but the movieclip itself. The same for the xray graphic, except you have that as a graphic symbol rather than a movieclip. To have that play while inhabiting one frame you'll need to change it to a movieclip symbol.
To get the text to play after the blinds (just a minor critique, I'd speed up the blinds), you will want to add some code in the frame where you added the stop in the blinds animation. You will also need to assign instance names for the text movieclips in the properties panel, as well as place a stop(); in their first frames (inside).
Let's say you name them upperText and lowerText. Then the code you'd add at the end of the blinds animation (in the stop frame) would be...
_parent.upperText.play();
_parent.lowerText.play();
The "_parent" portion of that is used to target the timeline that is containing the item making the command, basically meaning it's the guy inside the blinds telling the guy outside the blinds to do something.
You'll probably want to add stops to the ends of the text animations as well.
If you want to have the first text trigger the second text, then you'd take that second line above and place it in the last frame of the first text animation instead of the blinds animation.
Note, on occasion, undeterminably, that code above doesn't work for some odd reason... the animation plays to the next frame and stops... so if you run into that, just put a play(); in the second frame to help push it along.
PS GotoandPlay would actually be gotoAndPlay, and for the code above you could substitute play(); with gotoAndPlay(2); -
Need help in creating a web application that runs on a stand alone sys.
I am planning a small java web application complete with database. I need to know if there are any ways to deploy that application on a stand alone system and that if there is any way to make an executable for that application so that the user need not go through the process of deploying the app and starting the server whenever he restarts the system. Can anyone help me in this regard? Thanks in advance.
Hi Alex,
Since I had a Gmail test servlet kicking around, I ran it on the latest V3 nightly build.
On the first run, I encountered the following nested exceptions:
javax.mail.MessagingException: Could not connect to SMTP host: smtp.gmail.com, port: 465
--> java.net.SocketException: java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
--> java.security.NoSuchAlgorithmException: Error constructing implementation (algorithm: Default, provider: SunJSSE, class: com.sun.net.ssl.internal.ssl.DefaultSSLContextImpl)
--> java.security.UnrecoverableKeyException: Password must not be nullThe UnrecoverableKeyException is a manifestation of [https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938|https://glassfish.dev.java.net/issues/show_bug.cgi?id=6938]
I worked around this by adding the following JVM config options to domain.xml
<jvm-options>-Djavax.net.ssl.keyStorePassword=changeit</jvm-options>
<jvm-options>-Djavax.net.ssl.trustStorePassword=changeit</jvm-options> (Note: the default master password is "changeit")
These lines are placed in /domain/configs/config/java-config of domain.xml for the particular server config you're using. There's only one server config in the default domain.xml shipped with V3. Then restart the server.
I retested the code on both port 465 and 587, with and without the above config changes. Without the change, they both fail the same way, and with the change, they both work. Let me know if this helps.
-Peter -
Need Help with Kick-Starting Web-Provider Development
Hi,
My requirement is to develop my own web-provider. This web-provider should talk to the portal and manage its portlets. (basically extend oracle.portal.provider.v1.http.HttpProvider)
Though I have gone thru various documents about developing web-providers, I haven't been able to locate examples for the same.
I would really appreciate it if someone can help me with
1) the best place to look for information AND
2) sample code for a web-provider.
thanks in advance for the help.Anoop, <br>
Thats a pretty good idea to add new portlets on the fly (at runtime) to your provider.xml
I think this is how you could do this, <br>
1. Generate your portlet's <portlet>....</portlet> tags & add them to the current provider's provider.xml file. You could follow this sequence, <br>
- Get the path to your current provider.xml <br>
- Generate an XMLDocument object out of this current de finition file. <br>
- Create the new portlet's <portlet>...</portlet> structure. You would need to make sure that the new portlet added has a unique id & name in that definition file. <br>
- Add this <portlet> node at the appropriate place in the XMLDocument<br><br>
2. Refresh the provider to reflect the new portlet in the Portlet repository.<br><br>
There isn't an explicit code sample in the JPDK that you could perhaps reuse for step I. So much of the effort here will have to come from your side. Anyway, let me know if you face any problems during its implementation.
Regards,
Abhinav -
Need help with DOC type web service
hi,
I am trying to write a simple message style ( doc type ) web service but no success so far. I have tried to search for examples but no use. I already implemented some simple RPC style web services like calculator etc and able to use them. I am more interested in the DOC type ( which sends SOAP message and receives SOAP message back). Can Anybody give me an example for implementing this type of service ( very-simple say HellowWorld ) or point me to some website . I am not able to generate the response envelope. I can write the client program which will send a SOAP Envelope to this services with one parameter NAME and the services should return Hello Name but in a SOAP envelope form. I can create a SOAP message in this Client using SOAPConnection and MessageFactory etc. Your help will be really appreciated. There is very little stuff about webservices on the internet as well on this forum.
Thanks
VinodHello kwilding2,
Thanks for the quick response and pointing to some useful websites. I downloaded the code from web service essentials BUT all the examples are using SOAP RPC calls. They create a call object and call one of the service methods and a response is returned. I am little confused about this stuff. I am looking for something which returns the response in a SOAP envelope for which i think i need to use JAXM API which I already have downloaded. I have created a client which composes a SOAP envelope using SOAPConnection and other MessageFactory classes etc and can send this SOAP envelope to a web service. In return I want the web service to give the SOAP envelope.
I have gone thru xmethods.net and picked the following stock quote request and response:
Sample Request envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body>
<ns1:getQuote xmlns:ns1="urn:xmethods-delayed-quotes" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<symbol xsi:type="xsd:string">IBM</symbol>
</ns1:getQuote>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Sample Response Envelope:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/1999/XMLSchema-instance" xmlns:xsd="http://www.w3.org/1999/XMLSchema">
<SOAP-ENV:Body>
<ns1:getQuoteResponse xmlns:ns1="urn:xmethods-delayed-quotes" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<return xsi:type="xsd:float">133.625</return>
</ns1:getQuoteResponse>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
I also want the things in this order. This webservice at xmethods just returns the price for a stock, so how they say it returns this Response Envelope. Is this Envelope something implied. I am getting more confused.
any help will be appreciated.
Thanks
Vinod -
Hi All,
I cant get to stop SharePoint foundation web app service. Its stuck on status stopping
I have tried the following:
reset IIS
restarted the Timer Service
When I try to use powershell command to stop I get the following error:
Can anyone who went through this help PLEASE
Stop-SPServiceInstance : An object of the type
Microsoft.SharePoint.Administration.SPServiceInstanceJobDefinition named
"job-service-instance-1ff39eb2-12d2-457d-a749-265e350eb1b1" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named
"SPTimerV4". Rename your object or delete the existing object.
At line:1 char:127
+ ... pplication"} | Stop-SPServiceInstance
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...ServiceInstance:
SPCmdletStopServiceInstance) [Stop-SPServiceInstance], SPDuplicateObjectEx
ception
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletStopServ
iceInstanceHi,
It seems that the issue is in the timer job definition for executing this operation.
My suggestion is to start the service again and delete the job definition from the error and again try to stop it.
This might be helpful:
http://sharepoint.stackexchange.com/questions/22368/is-there-a-powershell-cmdlet-to-delete-a-timer-job
I had a lot of issues in the past when try to stop this instance after the Web apps are provisioned.
As general rule now If I have multi-server Farm topology that has servers that should not serve Web App requests I turn off the service prior to provisioning any Web Apps in the Farm.
BR,
Ivan -
Need help to develop centralized web application
Hello,
Please correct me if i am posting thread in wrong area.
I am going to develop web application for a university, a complete online portal for Teachers, Students and Administrators. There are more than 50 affiliated campuses of university in different cities. I need to develop centralized web application which all campuses' teachers/students/administrators will access from internet. Please guide me what hardware, module, development technique etc should i use.
I am using J2SE and Oracle10g to develop that application.
Thank YouGo to CustomInk.com. Their T-shirt Design App is not Flash based which is refreshing. Instead, they're using a sophisticated combination of CSS, JavaScript and PHP/MySql.
Digging a little deeper into the source code, it looks like the company that developed their T-shirt Design App is located in India and called No-Fresh.com
No-Fresh licenses their T-shirt Design App. You might want to contact them directly.
http://www.no-refresh.com/online-t-shirt-design-tool.php
Nancy O. -
Been building web pages for nearly 20 years, starting with GoLive. Went to Dreamweaver about 12 years ago, the Macromedia version. Tried going to iWeb when it came with a new Mac, but found it way too limiting with it's CSS template base. Unknowlingly, I then bought a new copy of Dreamweaver. Ooops, Adobe had bought Macromedia and Dreamweaver, too, is now CSS based, which for my money makes it useless to anyone who likes simplicity. Now I find that even iWeb has been discontinued. I was told yesterday that Apple doesn't have a web program any more. At 12 years old, I just don't think it's practical to try to load my old Macromedia Dreamweaver into the new Mountain Lion (I'm getting a new Mac), though it is running, barely, in Snow Leopard.
I need to find a web builder program that will permit simple construction of educational pages, nothing fancy, nothing artistic, just create a page, give it a color, type or drag in text, insert a table, insert pix in the table blocks, add text under the pix... done! I should note that I am not looking to build traffic. I teach simple things for free and people who want to learn those things (antique sewing machine repair, quilting, building longbows) find me.
I've downloaded trial versions of half a dozen or so programs and looked at maybe 20 more, but all are either CSS based and drive me insane with requirments for constantly making rules and template models, and/or require that you base your web presence in their server. Also, many will not work with pages built in other programs. I maintian a volume of over 1000 web pages, many requiring regular updating, and they have been with the same server for more than 15 years. I'm not about to change.
So, anybody know a simple, old fashioned web builder that's happpy on a Mac platform?
Captain DickAlthough not supported anymore, iWeb does still function using Mountain Lion...
http://www.iwebformusicians.com/iWeb/mountain-lion.html
... and you can purchase it from Amazon.
Start with a blank page using the Black or WHite template.
All modern websites use CSS and there are thousands of free templates to be had if you want to use a code entry style application. You will need to go this route if you want to create a site that is viewable on mobile devices although you can create an iPhone version using iWeb...
http://www.iwebformusicians.com/iWeb/Mobile-iWeb.html
Search this forum for numerous topics about iWeb alternatives. -
Need help to access a web page using midlet to retrieve some informations
Hi everyone i'm trying to access a web page using midlet to retrieve some informations in text format, the web page is [http://daviddurand.info/D228/?villes|http://daviddurand.info/D228/?villes] for my project.
the problem is that i always get error 10049 in socket::open meaning no adresse could be found i tried IP adresse and still the same.
i managed to recreate the same web page to test it on local and the surprise that it works fine but when accessing it online i have this error.
i tried also to get the page i created on a webserver i own to try it saying that there might be security issues but the same error appears again. so help plz
here is my code :
package mobileapplication5;
import java.io.*;
import javax.microedition.io.*;
import javax.microedition.lcdui.*;
import javax.microedition.midlet.*;
public class GetMidlet extends MIDlet {
private Display display;
String url = "http://dayaati.com/villes/index.php?villes";
public GetMidlet() {
display = Display.getDisplay(this);
public void startApp() {
try {
getBirthdayFromNameUsingGet(url);
} catch (IOException e) {
System.out.println("IOException " + e);
e.printStackTrace();
public void pauseApp() { }
public void destroyApp(boolean unconditional) { }
public void getBirthdayFromNameUsingGet(String url) throws IOException {
HttpConnection httpConn = null;
InputStream is = null;
OutputStream os = null;
try {
httpConn = (HttpConnection)Connector.open(url);
httpConn.setRequestProperty("User-Agent", "Profile/MIDP-2.1 Configuration/CLDC-1.1");
httpConn.setRequestProperty("Content-Language", "en-US" );
httpConn.setRequestProperty("Content-Type", "text/html; charset=iso-8859-1");
httpConn.setRequestProperty( "Connection", "keep-alive" );
httpConn.setRequestProperty("Content-Length","51200");
getConnectionInformation(httpConn);
int respCode = httpConn.getResponseCode();
if (respCode == httpConn.HTTP_OK) {
StringBuffer sb = new StringBuffer();
os = httpConn.openOutputStream();
is = httpConn.openDataInputStream();
int chr;
while ((chr = is.read()) != -1)
sb.append((char) chr);
// Web Server just returns the birthday in mm/dd/yy format.
System.out.println(sb.toString());
else {
System.out.println("Error in opening HTTP Connection. Error#" + respCode);
} finally {
if(is!= null)
is.close();
if(os != null)
os.close();
if(httpConn != null)
httpConn.close();
void getConnectionInformation(HttpConnection hc) {
System.out.println("Request Method for this connection is " + hc.getRequestMethod());
System.out.println("URL in this connection is " + hc.getURL());
System.out.println("Protocol for this connection is " + hc.getProtocol());
System.out.println("This object is connected to " + hc.getHost() + " host");
System.out.println("HTTP Port in use is " + hc.getPort());
System.out.println("Query parameter in this request are " + hc.getQuery());
**Heeeeeeelp Please**[http://java.sun.com/javase/6/webnotes/trouble/TSG-VM/html/crashes.html]
SIGSEGV (0xb)Most common cause of that is JNI code used directly or indirectly through a 3rd party library.
64-Bit Server VM (11.2-b01 mixed mode linux-amd64)Conversely that VM gets less traffic than others so you might have hit a bug in it. -
URGENT **** Need help for JAX-RPC Web Service Proxy deploy to OC4J 10.1.3.5
Hi everyone!
I’m really new to web services.
I’m getting a *500 internal server error* while deploying my JAX-RPC web service Proxy to an Oracle AS, in an OC4J, v. 10.1.3.5.0.
Running my client from my development environment (*jdeveloper 10g, 10.1.3.5.0*) everything functions correctly: from jdeveloper I can contact and use the web service defined by the following endpoint: https://www.medialibrary.it/services/federaMLOL.asmx?WSDL
I created a "try_ws_client.jsp" file that runs correctly from my local development environment jdeveloper (that uses an embedded oc4j, v. 10.1.3.5.0) but fails when run from the test server (Oracle AS, in an OC4J, v. 10.1.3.5.0), getting, as I mentioned a 500 internal server error, a white page in IE but with FF the message says: The’s an error in the servlet .....
Here's how I created the ws proxy and how I’m using it to consume the ws I mentioned.
1. I used the jdeveloper “Create Web Service Proxy” wizard (File > New > Business Tier > Web Services > Web Service Prox) and in the WSDL document URL I put: https://www.medialibrary.it/services/federaMLOL.asmx?WSDL
2. The operation ended without adding nothing to the web.xml file and creating the proxy files. One of them is: FederaMLOLSoapClient.java that have the WS exposed methods (es: public boolean createUser(String) ) + a “main” method with the example how to use this client to consume the WS.
public static void main(String[] args) {
try {
it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient myPort = new it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient();
System.out.println("calling " + myPort.getEndpoint());
// Add your own code here
} catch (Exception ex) {
ex.printStackTrace();
3. In FederaMLOLSoapClient.java I’ve create the method "tyIt":
public String tryIt(String username) {
try {
it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient myPort = new it.reggiocity.provincia.mlol.proxy.FederaMLOLSoapClient();
if(myPort.createUser(String username)) {
return “O.K”;
} else {
return “K.O”;
} catch (Exception ex) {
// logs error
4. I created my try_ws_client.jsp file that creates FederaMLOLSoapClient object and calls the tryIt method, printing the “OK” or “KO” message.
<%@ page import="it.reggiocity.provincia.biblioreggiane.*"%>
<%
String message = "";
FederaMLOLSoapClient obj= new FederaMLOLSoapClient( );
message = obj.tryIt(“AAAAAA70R10H226H”);
%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<%@ page contentType="text/html;charset=windows-1252"%>
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252"/>
<title>prova</title>
</head>
<body><%=message%></body>
</html>
The situation is:
My try_ws_client.jsp runs correctly from my jdeveloper and the user is created while creating app.ear and deploying it to my Oracle AS/OC4J as mentioned above, I get a 500 Internal Server Error.
Any idea to find a solution to this problem?
Please help.
Take care.
John M.Hi,
you want to build the Web Service, or you want to consume the Service as a client? If the latter, Web client (ADF?) or Java client?
Frank -
Need Help ! Content Search Web Part with default callout menu as docoument library
I want the above functionality with the Content Search Web Part(CSWP).
Hi,
Per my understanding, you might want to create something like a
Content Search Web Part(which is introduced in SharePoint 2013) in your SharePoint 2010 environment with the callout menu functionality.
As there is no OOTB Content Search Web Part in SharePoint 2010, a suggestion is that you can build a custom web part with the help of
Search API and create custom callout menu for it.
Two demos about
how to work with Search API in SharePoint 2010 for your reference:
http://nikpatel.net/2013/02/21/step-by-step-building-custom-sharepoint-2010-search-applications-using-keywordquery-api/
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2010/08/12/how-to-use-the-sharepoint-2010-enterprise-search-keywordquery-class.aspx
For about
how to create a custom callout menu, the JavaScript plugins below would be helpful:
http://www.jqueryrain.com/demo/jquery-context-menu/
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Need help with publishing for web
Hi,
I am a new user to Captivate but am trying to create an
online demo that will be accessible via a link on a website.
I have recorded the content and have added the animation.
I have published the file as an executable and also as a
flash (export to html). I have then opened the demo on a variety of
PC systems to see the quality of my project. I am discouraged
because in an executable and in a web browser my project is much
larger than what I created and on some slides I do not believe the
complete image is visible (on some systems). Is there any way to
control the size of the executable or html final project?
I am curious to what other have done to produce a high
quality end result demo. Any suggestions, or advice would be much
appreciated.
Thanks,
AlllisonHi Allison and welcome to our community
What you have posted would seem to suggest you have created
.SWF output with the .HTM companion page (Export HTML).
Contrary to what you may believe, the Export HTML option
doesn't produce a pure HTML version of your movie. Instead, it
produces an additional HTML page intended to be used to cause your
movie to display at the size in which you recorded it.
So again, what you have posted would seem to indicate you are
linking directly to the raw .SWF and bypassing the HTML page. If
you do this, the .SWF simply opens at whatever size the browser is
configured for.
Or... possibly you recorded full screen. (not best practice
by any means) If you recorded at perhaps 1024x768, when your user
plays the movie back, they get scroll bars as the browser area is
reduced so it can display the "chrome" elements. Buttons and
whatnot. So best practice in this situation is to record at a
smaller size that will comfortably play back for your end users.
Not only from the physical size perspective, but the "weight" of
the bandwidth needed to pull the movie down. (The larger the
physical recorded size, the more bandwidth is required).
Cheers... Rick :) -
Re: Need help with open a web page
Dear friend i cant open www.truperenlinea.com maybe you can support me because i install IE but other 5.2 version,
i dont want install parallel and Windows, you can try to open for me and explain me.
See the right side in the web need can see the username and password space to fill.
Thank you so much
Best regardsSorry, I got confused.
You need to stick you your original post.
Please don't post in someone elses thread, especially when the thread is completely in the wrong place to begin with and you post has nothing to do with the original post.
Maybe you are looking for
-
How can I get all my photo out after I instal Iphoto 11/9/2/1
Hi: I update my Iphoto 11/9.2.1 But I cannot load all my photo from the photos liabary
-
How to disable line items of sales order ie not editable
Hi All, I want to diable line items of BOM when using it in sales order, Can any one tell me how to do it and which USER EXIT or BADI i have to use it for. Regards, Sudhakar.A
-
I had all of my music on an external hard drive that crashed. I have iTunes Match so all of my music was synced in the cloud. How do I now re-load my music back down onto a new external hard drive?
-
Runtime error with doc/lit style web services
I've written a web service client (wrapped doc/lit style) and when I try to invoke the service, I get the following runtime error. I see some have reported the same error before and I don't see a resolution for the issue. Any help to resolve the issu
-
Cal report from form to maximize
Hi , I tried calling a report from my form but my report didn't maximize. Could someone help me in finding a way to maxize my report when I call it from form. Declare pl_id ParamList := Get_Parameter_List( 'tempdata' ); Begin IF NOT Id_Null( pl_id )