Need help on Hyper V 2012 for configuring pass through disks

Hallo guys,
I have 7 hypervisors of Windows server 2012 running on bare metal, all are in cluster. I also configured SCVMM 2012 server.I created 10 Vm's. Now i want to make clusters of 2 node each & assign LUNs to my VM.
Storage guys have assigned all the LUNs to my physical servers, when i go to disk management of my physical servers , i see all LUNs are offline state(by default..)
My question is how do i assign the LUN to my VM? what is the steps for this ? i also wil be making 2 node cluster of VM's.
Regards,
Amol Sutar

Hi Amol,
>>i see all LUNs are offline state(by default..)
It's normal. To ensure the Guest has exclusive access to the storage, the LUNs must be placed in an
Offline state from the Hyper-V server perspective.
>>My question is how do i assign the LUN to my VM? what is the steps for this ? i also wil be making 2 node cluster of VM's.
Here is a detailed guide, it may be helpful:
Configuring Pass-through Disks in Hyper-V
http://blogs.technet.com/b/askcore/archive/2008/10/24/configuring-pass-through-disks-in-hyper-v.aspx
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • Need Help to create new screen for RF Sapconsole

    Hi Guru's
    I'm new on RF (but some years in ABAP) since last week.
    I need help to create new screens for RF (SAPLLMOB).
    Can someone explain me the procedure to create screen (with ABAP code after) or perhaps someone have an exemple (simple or not) ?
    I have to develop 2 new screens with really few time.
    And, another subsidiary question :
    how SAP can transfert information between the flash gun and the screen i have developped.
    Is there some code to add to enable this functionality or it is include in SAPLLMOB on standard fields ????
    It's a new strange world for me today...
    Many thanks to everyone who can explain me
    Alain

    hi,
    I am facing this problem as well. Is there any reference to create the new screen?
    Hope someone can help! Thanks!
    Regards,
    Darren

  • How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    How do I reorder songs in a playlist in the new itunes??? I can no longer just click and drag. When I click, it doesn't move!!!! Need help ASAP- trying to prepare for an aerobics class and need songs in a specific order!

    Vera,
    Use View > View Options, and set 'Sort By" to "Manual Order."
    Then you will be able to drag-n-drop songs up and down the list.

  • Need help with a activation code for Adobe Acrobat X Standard for my PC,, Don't have older version serial numbers,  threw programs away,  only have Adobe Acrobat X Standard,  need a code to unlock program?

    Need help with a activation code for Adobe Acrobat X Standard for my PC, Don't have older Version of Adobe Acrobat 9, 8 or 7. 

    You don't need to install the older version, you only need the serial number from your original purchase. If you don't have them to hand, did you register? If so, they should be in your Adobe account. If not you really need to contact Adobe, though it isn't clear they will be able to do anything without some proof of purchase etc.

  • I need help getting new authorization codes for digital copies

    I need help getting new authorization codes for digital copies of movies. Can someone help me out?

    There's a lot of results in Google when you search for this but unfortunately refreshing the page doesn't seem to generate a different code anymore. Mine also says already redeemed

  • I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

    I need help in Downloading Adobe Elements for my Mac & Adobe Acrobat for my laptop...I have been battling for the last day.

    ~graffiti wrote:
    PjonesCET wrote:
    I know if you attempt to download and exe file to Mac from a Mac Partition you'll get something like. Cannot not understand file format octet-stream. This means it does not recognize MS execute files.
    Not necesarily. I've done it a few times.
    PjonesCET wrote:
    I'm not sure you can download a PC copy of Acrobat 9 unless you operating from bootcamp or other such application and running the PC partition.
    Yes. You can.
    I've learned something. New. This must be recently changed. That last time I clicked on a Link I though was a dmg file and turned out it was and exe file my Macs wouldn't allow me to do so. But haven't tried recently everytime and exe file comes up I cancel. I gues I am used to the time everytime a Virus or some other nasty was downloaded it was packaged in and exe file and Macs owuldn't allow it. I suppose with the INtel guts now they can no longer refuse to download.

  • Maestro need help also code is 75957252 for bios password reset

    maestro need help also code is 75957252 for bios password reset
    This question was solved.
    View Solution.

    Check your other post. I replied there.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?

    I need help getting the license number for Adobe Photoshop Elements. However, It doesn't recognize me as an authorized user. Can someone help?@

    I am having the same problem...did you ever fix it?

  • I think I need help with driver (software) settings for D110a

    I think I need help with driver (software) settings for D110a all-in-one
    Product: D110a all-in-one
    OS: Windows XP Professional
    Error messages: None
    Changes before problem appeared: None--new installation
    The quality of photo images (mostly JPG files) in printouts is awful even though the files display beautifully on the PC screen. I am using
    IrfanView software for displaying/printing. As far as I can tell, IrfanView is not the problem.
    When I print the same images on a Deskjet 5150 attached to a different PC also running XP Pro and IrfanView, the quality of the printouts is at
    least acceptable, Some would probably say good or very good.
    It's dificult to explain in words the problem with the printouts. A picture of really pretty vegetables (squashes, tomatoes, watermelon, etc) comes
    out much too red. Moreover, the red, which appears shaded on the screen, seems to be all one shade in the D110a printouts.
    Something similar happens to a view of a huge tree in full leaf. On screen, there are subtle variations in the "greenness" of the leaves. In the
    printout, all green is the same shade. In the same printout, the trunk of the tree is all a single shade of grey. It isn;t even obvious that the
    trunk is a round, solid object.
    I liken the effect to audio that disappears entirely when you lower the volume and gets clipped into square waves in even moderately loud passages.
    I don't know whether the D110a driver software permits adjusting the parameters that appear to be set incorrectly, and if adjustments are possible,
    how I would identify which parameters to adjust, how I would access them, or how I would adjust them. I'm hoping that someone can help. Thanks.
    I forgot to mention that I have used the diagnostic application and it tells me that there are no problems.
    e-mail me at [email protected]

    brazzmonkey wrote:
    Hi everyone,
    I noticed the following message when network starts on my gateway
    Warning: This functionality is deprecated.
    Please refer to /etc/rc.conf on how to define a single wired
    connection, or use a utility such as netcfg.
    Then I realized the way network settings should be written in rc.conf has changed. But I can't figure out how this should be done.
    Currently, my set up is the following (old way):
    INTERFACES=(eth0 eth1)
    eth0="dhcp"
    eth1="eth1 192.168.0.10 netmask 255.255.255.0 broadcast 192.168.0.255"
    ROUTES=(!gateway)
    eth0 is on DHCP because the IP is dynamically assigned my ISP.
    eth1 has a fix IP because it's on the LAN side.
    No problem to use DHCP on eth0 with the new settings.
    But for eth1, I don't know what I am supposed to write for gateway.
    Wiki isn't clear on that one either, and it looks like many articles still refer to the old way.
    Any guidance appreciated, thanks.
    brazzmonkey,
    you can't define 2 interfaces the old way (even though I saw some tricky workaround somewhere in the forums).
    Use, f.e., netcfg:
    Comment your old lines.
    In /etc/rc.conf insert:
    NETWORKS=(Eth0-dhcp Eth1-static)
    DAEMONS=(..... !network @net-profiles ....)
    In /etc/network.d create 2 files:
    First one is named  Eth0-dhcp.
    Contents:
    CONNECTION="ethernet"
    DESCRIPTION="Whatever text"
    INTERFACE=eth0
    HOSTNAME="your hostname"
    IP="dhcp"
    DHCP_TIMEOUT=15
    Second one is named Eth1-static.
    Contents:
    CONNECTION='ethernet'
    DESCRIPTION='whatver'
    INTERFACE='eth1'
    HOSTNAME='hname'
    IP='static'
    ADDR='192.168.0.10'
    GATEWAY='192.168.0.1' # your gateway IP
    DNS=('192.168.0.1') # your DNS server
    The names Eth0-dhcp and Eth1-static are not magic. They just must be the same in rc.conf and in /etc/network.d.
    Hope it helps.
    mektub
    PS: netcfg must be installed.
    Last edited by Mektub (2011-07-20 14:07:05)

  • Need help reformatting my hard drive for mac only

    Help please
    Need help reformatting my hard drive for mac only with my toshishba hard drive

    What Mac is this please, with what version of OS X?

  • Need help to redeem contact code for OS X 7

    Need help to redeem contact code for OS X 7

    Hello NOREDEEM,
    Thanks for using Apple Support Communities.
    If you have the purchase code for OS X 10.7 Lion, then you can follow the directions below to redeem it on your Mac.
    Mac App Store: Redeem gift cards and download codes
    Take care,
    Alex H.

  • I need help with downgradeing my ios for my ipod touch 4th gen

    i need help with downgradeing my ios for my ipod touch 4th gen

    As has alwys been the case, you cannot go back.
    Sorry

  • Need help reinstalling Acrobat X pro for MAC. Got one site but I-tunes didn't recognize so couldn't go further. I have serial

    Need help reinstalling Acrobat X pro for MAC. Got one site but I-tunes didn't recognize so couldn't go further. I have serial

    Actually, you can and have downloaded from there, because that message only happens when the download is finished.
    The message is entirely normal, and is Apple's way of encouraging the world to use the Mac App Store. That doesn't help you because Acrobat isn't in the Mac App Store - it isn't allowed there.
    So, what to do? Change your system settings
    Please follow the steps given below to resolve this issue -
    System Preferences > Security & Privacy > General > Allow applications downloaded from > Anywhere

  • Reading hyper-v pass-through disks using WMI?

    How do I read pass-through disks for a guest VM from a Hyper-V using WMI? I'd like to read the pass-through disks that are available to a guest VM using the below mentioned ways:
    1. Add a disk to Hyper-V server, take it offline and assign it as a physical disk to VM
    2. Configure iSCSI initiator in guest VM to get a disk directly from storage array
    3. Use VFC to export a fiber channel lun to guest VM directly.
    Thanks/Hem

    You had another post with very similar questions, and I replied to it.  A broad answer is to use PowerShell as it does most, if not all, of the WMI work for you.  If you are having issues, it would be helpful for you to post specific questions
    about the issues you are seeing.  If they are scripting questions, you would reach more scripting experts in the Scripting Guys forum (http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG). 
    And you can go to the scripting gallery (http://gallery.technet.microsoft.com/) to find examples of many, many different things.
    .:|:.:|:. tim

  • CSV V/s Pass through disks with HV 2012 R2 failover cluster

    Hi
    We are using HV 2012 R2 failover cluster with CSV. We found some articles saying pass through disks outperforms CSV. Is this correct?
    Regards
    LMS

    Hi
    We are using HV 2012 R2 failover cluster with CSV. We found some articles saying pass through disks outperforms CSV. Is this correct?
    "The juice isn't worth the squeeze" (c) ...
    Tim is 200% correct here: any performance gains (if any...) you'll get will fade in darkness compared to management burden you'll have with pass-thru disks (issues with failover, VM migration and no
    real support with a major VM backup vendors). Making long story short: don't do it.
    StarWind Virtual SAN clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Maybe you are looking for