Need help on IBM ServeRaid 5i BIOS/Firmware upgrade

Hi,
We just upgraded the Cisco Call manager on IBM xSeries 345 MT-8670-M1X server with Cisco patch WIN-OS-Upgrade-K9.2000-4-2sr6.exe. After upgrade we got this error message about IBMC ServeRaid 5i controller card.
"Version mismatch detected: controller 1. The BIOS (version 6.10.24), Firmware (version 6.10.24), and Driver (version 7.10.18) are not a matched set and are not compatible."
We download the BIOS/firmware upgrade Disk from this web site.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62462
During the upgrade, the server continues ask insert disk1.
Also this site does not have the latest device drive for IBM ServeRaid 5i in windows 2000 server.
I need some help and you will get my highest vote
1. Where can I get the proper BIOS/Firmware upgrade disk from Cisco?
2. During the upgrade stage, why the server always ask insert disk 1. I have tried all 5 disks. But none of the work. I disconnect the mirri during the upgrade. Does it affect the upgrade?
3. Where can I get the latest device driver for 5i work with windows 2000 server?
Many thank
Kevin

Hi kevin,
Open a case wid TAC they will direct you on the right route.

Similar Messages

!!!PLEASE HELP!! I NEED HELP UNLOCKING ADVANCE OPTION IN BIOS LENOVO G40-70

i cant do anything in my bios on my lenovo g40-70 i need help unlocking advance options in bios,i tried flashing it but something in the system is preventing it from flashing.can you guys relase an update fixing that or relasse an update to enable us chane our video memory on our bios............thankssssssssssssssssssssssssss in ADVANCE!

Welcome to the Lenovo Community !
What BIOS update are you trying to do...... the Lenovo 9ACN29WW release or one that someone created for you over at BIOS-Mods?
Are you getting any error messages in regards to the update failing ?
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

RSI Issue: Need help on IBM/Lenovo external keyboards w Trackpoint? Pic

Need help on IBM/Lenovo external keyboards w Trackpoint? Pic
I started my journey with Thinkpads on a T42, then T43.. then T61, X61T, R61 & T410 (bought for 2 cousins & they love it), W510 (dads new laptop). I may be a much recent convert but I swear by them now.
MAJOR ISSUE: Recently started feeling RSI (Repetitive Stress) & Carpal Tunnel symptoms (already doing stretches.. adjusted the desk.. & finding new adjustable LCD stand) since I am not using the Thinkpad directly... but using it docked with an External keyboard. Lot of Mousing as well. I'd like to go back to Thinkpad FEEL... or atleast have keyboard with a pointing device so my hands dont have to keep moving back n forth.
So, it would be great it some of my fellow T4x/T6x/X6x 'ers would guide me a bit on this... share their first hand experience, or what they've seen on these keyboards and feel free to point me to reliable sources of information.
Currently this would greatly be use with T61 - Adv Mini Dock - 30" XHD3000 LCD as shown in my signature below.
Anyone who has used or know something about one of these Thinkpad related keyboard (ideally both of these to give a comparative response).
Which of the following have you used?
How was the experience?
(Maybe point me to thread with peoples experiences)
If you've used several, which one do you prefer / recommend? Why?
At the moment I have a "slim" BTC 6200C desktop keyboard. It has laptop like scissor keyswitches, so I like it the slim notebook like profile.
The way I have positioned my 30" LCD I'd like to be able to keep the keyboard on my lap at times while on my chair and maybe on the desk at times.
ThinkPad Full-Size UltraNav USB Keyboard
The keyboard and trackpad of the IBM Lenovo Thinkplus USB Keyboard with Ultranav:
ThinkPad Travel UltraNav USB Keyboard
The travel version of the above:
Newer:
ThinkPad USB Keyboard with TrackPoint
A 2009 replacement for the previous one but not the full keyboard nor wireless:
Thinkpads:
T61 8892-02U: 14.1"SXGA+/2.2C2D/4G/XP|Adv Mini Dock|30" Gateway XHD3000 WQXGA via Dual-link DVI
X61T 7767-96U: 12.1"SXGA+/1.6C2D/3G/Vista|Ultrabase
W510 4319-2PU: 15.6"FHD/i7-720QM/4G/Win7Pro64 (for dad)
T43 1875-DLU: 14.1"XGA/1.7PM-740/1G/XP
Dell:
Inspiron 9300: 17"WUXGA/NVidiaGeForce6800/2.2PM/2G/XP (old)

I had the same issue - had to go to voice command for a few weeks (sucked) wore wrist gards to keep things netural.
Everything went away when I changed to a USB keyboard with the Ultra nav (I use the track point and disable the pad).
I've been working like that for 6+ years now... no issues.
(as a side note, sleeping with wrist guards on helped heal me the fastest. I had neoprine, with a metal plate in them - from a local drug store)

Need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook.......

need help with how to reset bios and admin password to reformat hard drive in 8440p elitebook? removal of cmos, resetting laptop, using cccleaner, windows password recovery and hiren's was noneffective, any help is appreciated. thanks

Hi,
As your notebook is a business class machine, security is more stringent - the password is stored in non-volatile memory and there are no 'backdoor' passwords. Your best option would be to contact HP regarding this.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HT5654 please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

please I need help, I have not been able to upgrade my iOS from 6.1.2 to 6.1.3?

Hello mpacology
The article below will provide assistance with upgrade your iPhone operating system. You can do this through iTunes or through the Software Update section in Settings >General > Software Update
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
Thanks for using Apple Support Communities.
Regards,
-Norm G.

NEED HELP DISABLING INTEGRATED GRAPHICS IN BIOS

Essentially the title is self explanatory. Im having issues with the options that the out of the box BIOS provides on the MSI GT70 0ND 444US, I cant find the options to turn the integrated graphics off because one of my programs is auto defaulting to the intell 4000 graphics rather than my Nvidia dedicated card in the laptop. Its causing issues with game play mostly low frame rate and bad quality graphics in the game. I don't know if i need to unlock or update the BIOS, generally just in the dark on the solution and iv tried a few things, but to no avail. If anyone Preferably a MSI tech specialist can help with this problem it would be greatly appreciated.

In the nvidia control panel you can add or remove what programs you want to run with the discrete graphics, you can also right click a program/app and click run with discrete graphics. I don't think you need the integrated graphics but I also don't think they give you the option to turn it off. I have a msi laptop as well and msi completely takes power usage out of the end users hands, my CPU was throttling to 800mhz and I contacted msi and they said I needed it to to that for battery saving, I told them I always have it plugged in and I want it running full tilt 100% of the time, my gpu was throttling as well. The problem is that it was throttling both even with it plugged in. I finally found a program that overrides that crap!! It's called throttlestop. Now my gpu runs where I have it set to run and I have 4 presets on throttlestop for what I want my cpu to run at, I can even keep it at max turbo speed if I want.

Need Help in Knowing Exactly What is Installed & Upgrading RAM & HD

Hello-
I am not very tech savvy, so I am calling for some help here. I might be getting in over my head, but I think with some help here and from Apple articles, I should be able to correctly upgrade to the max RAM and the best quality and largets HD. I have a brand new cMBP. I wanted 16 GB (or need 16 Gb of RAM) but that configuration was not possible. I understand one needs to install RAM that is compatible with the existing RAM, which I do not know how to figue that out too. I need to figure out how much RAM is currently installed, and either take the existing RAM out and install sticks of the best RAM I can get for this cMBP that equals 16 GB of RAM. I would like some recommendations on where to go to get the RAM, how to know what type I need (I know there are several numbers/letters that identify the RAM), and I think I found the link that shows me how to change the RAM. I do not have the proper screwdrivers so I will need to get those, but my main concern is to know what to do with the existing RAM. I know that I did order the least amount of RAM I could get since I knew I needed 16 GB so I was gong to upgrade. I did read the RAM has to be evenly divided but I am not sure exactly what that means since I do not know how many slots it has. I stayed with the least expensive HD because I knew I was going to try and upgrade to the largest SSD (or Flash Drive-not sure of the difference). If it is difficult to swap out the existing HD 5200rpm for the best SSD, I have not been able to find that Apple article, but recommendations on a website to get these drives for the MBP I just received would be really helpful.
Thanks in advance for any help you can give me. Remember I am not savvy in this type of stuff so I need as much detail explanation as one can give me.

As for the 'old' RAM - I have a drawer full of old sticks, carefully labeled. Because RAM is so cheap just now, you're not able to get much for it: maybe hand it down to a friend in need?
Yes, the 512GB is one of the largest consumer SSDs made. OWC has a 980GB, but it's only for 3Gbps speeds and we have 6Gbps speeds on our MacBook Pros. For some good information and a 'buyer's guide' to SSDs, see Sean's SSD Buyers Guide & Information Thread. One of the drives that he recommends is the Crucial m4 series.
I do use my Thunderbolt port - I've an Apple Thunderbolt Display and just recently (this month) added a LaCie 2Big Thunderbolt 4TB disk (it's actually 2 disks - it comes formatted as RAID 0 but I 'unraided' it and now have two 2TB disks). Lightening fast - I use one drive as a Time Machine backup and the other as my 'working' drive for any and all projects that I'm currently working on.
Because my Denon reciever has AirPlay, I don't have external speakers for my computer any longer. My first pair were some Harman Kardon Soundsticks and they were good, but I bought the Bose Companion (it was at III then - I believe that they're at 5 now) speakers in 2006 and found them to be unsurpassed. They work great with Apple products. The Bose are expensive, but worth it.
Try Amazon for both the Crucial RAM and SSD - they have a slight discount, anyway, from what you'd pay ordering directly from Crucial.
Good luck,
Clinton

Need help with Bootcamp 1.2 and firmware on my MB

Boot Camp Assistant 1.1 was working fine but I decided to update it with version 1.2 for the new drivers after it came out. I trashed the Boot Camp Assistant.app from the utilities folder and ran the 1.2 installer. The upgrade appeared to go fine but when I run Boot Camp Assistant.app I only get "Boot Camp Assistant cannot be used: You must update your computer's boot ROM firmware before using this setup assistant".
When I check the FW on my MB I find that I have:
Boot ROM Version: MB11.0061.B02
SMC Version: 1.4f12
When I look on Apple's support pages I find that the latest Boot ROM version for my machine is MB11.0061.B03. I guessed that this is why Boot Camp 1.2 was not working but didn't understand why I had not received any update message from the automatic update utility.
I decided to manually update the firmware and downloaded the appropriate file from http://www.apple.com/support/downloads/macbookefifirmwareupdate10.html
My surprise was big when I was going to run the update and I got "ALERT: This computer does not need this update".
I don't know what to do now. I have tried to reinstall Boot Camp 1.2 without been able to run it. Why cannot I update to MB11.0061.B03?
I appreciate your help. Thanks a lot.

I have been trying to find the place where it says that the firmware update must be applied before bootcamp and I really don't find this info. Could you please point me to where you have read this information?
To re-install OS-X is a painfull process for me because I don't have access to all the appz that I have installed from where I am at the momment, I would have to wait to come back to my work base and ask for the CDs again and this is not possible until maybe 4 months.
I really think that re-partitioning and re-installing everything just for installing a firmware update is really extreme. I could delete the XP partition using Boot Camp assistant 1.1.2b after moving it from the trash (it still works) for putting my drive as it was before bootcamp and try the FW update then, but what confuses me is why am I getting a "Your computer does not need this update" message in stead of "There is a problem trying to install this update"?.
Thank you very much.

Need help finding overclocking settings in BIOS on my Z97 Gaming 7

Hello Folks!
As the title states I need some help finding some settings in the BIOS to help in overclocking on my awesome new MSI Z97 Gaming 7 mobo! For instance I can't find anything related to Load Line Calibration, LLC. I am unable to find additional settings for PLL and what the settings that are there do, for instance CPU PLL, the options are something like LL and SB? There is no explanation for what either of these are. These may be pretty basic things in overclocking Intel. I should also mention that I am new to Intel processors and their mobo's. I have always used AMD cpu's and overclocking seemed a bit more straight forward. This is also the first MSI motherboard I have owned so I am also new to these. I have been a great fan of MSI GPU's for years and finally had the chance to buy a motherboard and while it has been a great experience thus far I seem to be slighty behind the learning curve here. I do appreciate all the help I am able to get. I have read the guides that I have seen others pointed towards and have not really found the information I am looking for there.

Nichrome, thank you for the heads up concerning placing my rig info into my signature, I will do that immediately. Thanks for trying to help. I really do appreciate it. I am very familiar with overclocking on the AMD platform. I have previously owned and abused the PhenomII 965BE, 1055T FX-8320 and FX-8350. I guess switching from AMD to Intel and being confronted by so many new terms and settings in the BIOS I was kind of lost. I wasn't really too concerned with the PLL per say other than just desiring to know as much about my new system and motherboard as possible. I have always been a firm believer that to get the most out of your equipment you need to know it intimately, I guess I will get there with a bit of time and perseverance! I was really mainly trying to figure out where the LLC settings would be hidden or what they would be known as with an Intel based system, this setting is usually quite important when trying to stabilize higher overclocks. I am currently running and tinkering with an OC speed of 4.7-4.8GHz @ 1.275v with temps staying ~55C. I was hoping to push a little further and was trying to give myself the best possible advantage in doing so. Again, thanks for the help and information!!!

Need help with installing old version of firmware

I would like to revert to an old version of firmware for my Airport Extreme base station. I have read in a number of postings that this would possibly help with the problem of my Canon Pixma ip3000 not working after the firmware was usdated. When I tried to install the old firmware, the Installer would not allow it, there was just a message that the software was up to date. Could anyone please give a step by step description of how this can be done? Is there a way around the Installer? Thanks.

The firmware supplied with the base station was 4.1. After installing it, everything worked just fine, including wireless printing to a Canon Pixma ip3000. At one point, after being prompted by a message onscreen to upgrade to 4.2, I did the download and installation, and that is when all the problems started. No wireless printing, and I can't seem to use the Airport Admin or Assistant (not responding). Since then I have also upgraded the OS to 10.4.5.
I am trying to downgrade to 4.1 since that is what worked initially and what was suggested in another posting I read.
I did look at the information for the various parts of Airport and noticed that the Setup Asistant is 4.2, the Admin Utility is 4.2 and the base station is 5.5.1. Could this be affecting the problem as well?
I will try downgrading using the link you provided. Thanks very much.

Need help: playing songs in order, strangewindow message, upgrading I-Tunes

I have 2 situations I hope someone can help me with:
1: PLAYING SONGS IN ORDER; WINDOW MESSAGE
I have CDs of music that when I load them onto my pc laptop the song names don’t come up—each song lists as “track 01” “track 02” etc.
When I try to play the album thru I-Tunes on my laptop, the songs won’t play in order. i.e. ALL the “track 02”s will play before going to “track 03,” then ALL the “track 03”s will play, etc. So I made a playlist of each CD.
Now when I try to play the Playlist, I get a window message that says, “The song “Track 01” could not be used because the original file could not be found. Would you like to locate it?” I can choose ‘yes’ or ‘cancel.’ YES takes me to folder selections. I find the song and click on it and then it plays.
There must be an easier way. I don’t want to search for each song one at a time in order to play an entire CD in order.
2: UPGRADE
I need to upgrade. I have I-TUNES 7.0.2. I went online to apple.com and couldn’t find any upgrade option, so I clicked on “download I-tunes”. I got a window that says “download complete.” But how do I tell if it’s really installed? Where do I go on my computer to see what version number it shows?
Any help is appreciated,
Carolyn in Las Vegas

2. Help->About iTunes
1. You have done something that has confused iTunes about the location of the files in its library. Without knowing what happened, it's hard to make a specific recommendation, but if you moved your files around manually, move them back, and then, if you want to change the location, do it only by setting it in iTunes preferences and then using Consolidate Library.

I need help with my wife's Iphone 4 upgrade, can you help me?

I just talked my wife into upgrading her iphone 4, but it says something is wrong after downloading, can you help me??

It is almost impossible to help you as you have provided no information about your issue.
If you were to explain the issue, then maybe someone could help.

Need help with photoshop cs5.1 to cs6 upgrade

i just downloaded the upgrade to cs6 - i have cs5.1 . when i entered the serial number it read " this serial number is not for a qualifying product " how do i fix this?

Check this :-
http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

WRT54GS V.4 Firmware upgrade failed.

Hi,
I need help on the unit on the firmware upgrade.
Info:
Device Model No.: WRT54GS v.4
Webpage firmware Version: v1.06.3
I had download the Version 4 firmware and upgrade fail.
Please help!!!!
Thanks

Are you getting any specific error..?
Which browser you are using...?
Are you upgrading the router's firmware from wireless computer...?
Use the hard-wired computer (connected to the router) and try to use Internet Explorer to upgrade the router's firmware and check.

Stop Errors in Windows XP with K7N2-ILSR....need help!

Hello,
i recently received a replacement for a K2N2-ILSR mobo and i am still having BIG problems with it. With the first mobo, installation of Windows XP w/SP1 simply would not complete. The installation kept crashing and STOP ERRORS like 0x8E, 0x0A would appear and random points of the process (i tried to install them more than 20 times). The CPU was an XP 1800+ and memory was 2 DDR400 sticks of not so good quality (cheapest i could find...at that point i did not know that the mobo was so picky with memory). The Graphics card is a FX5200. PSU was 350W. When i checked the system BIOS i show a CPU temperature reading of 85 degrees! Of course, the CPU was nowhere around 45 at that moment (which i verified by testing it on another mobo). I suspected that the motherboard was faulty and returned it. In the meantime, i figured out about these issues with Nforce2 and memory, so i decided to upgrade everything. I bought a Barton XP 2500+, 2 Crucial DDR400 256MB sticks and a new Enermax 450W PSU. I tried them on the new mobo, but guess what...XP w/SP1 still did not install! I finally tried to install XP w/out SP1 and everything worked fine! Or so i thought so....after 3 weeks of working with it i STILL get STOP errors, mainly 0x0A and 0x8E.
Could anybody PLEASE help me?
Thank you very much,
flash

Is it a Deskstar if so IBM have issued a firmware upgrade for those drives Here to stop them doing the funcky chicken.

Need help on IBM ServeRaid 5i BIOS/Firmware upgrade

Similar Messages

Maybe you are looking for