Need help on installation problem

When I was installing the Portall 3.0, in Step 5 of 6: Tablespace Options, I got an error message saying "The default tablespace selected requires 100 MB of free space. Increase the tablespace size to continue". My hard drive still has plenty of space. Does anybody tell me how I can increase this default tablespace size?

You need to increase the size of the tablespace (Using the 'alter tablespace' command) in your database before starting the install process.

Similar Messages

Need help with installation

I recently received a laptop from school to access my online classes. When I tried to use Adobe Reader I received the following message: Adobe Reader 9.1 has encountered a problem and needs to close. Sorry for the inconvenience. I tried tech support at school and was told to uninstall and reinstall the program. During the installation process I received the following error: Error 1321 The installer has insufficient privileges to modify the file C:/Program Files/Adobe/Reader 9.0/Reader/Onix32dll. I need this program for school. Can some one please help me.

Hello again, Michael,
Was unable to do the UAC changes. Buttons where not highlighted. I just went ahead and uninstalled Adobe and downloaded Foxitsoftware and it works. Thanks for all your help Michael you have made my online school experience better.
Sincerely,
Sherri Lee
Date: Mon, 13 Jul 2009 11:03:52 -0600
From: [email protected]
To: [email protected]
Subject: Need help with installation
Hello again, Sherri:
It's my pleasure to provide assistance when I can :•) Having just recently graduated after 7 years of effort just to get a 2-year degree, I can relate to needing software to get class work accomplished. I will do everything I can to make it happen for you today.
Since you didn't mention, the UAC setting, I'd like you to disable it for me if it isn't already:
1. Open Control Panel
2. Under User Account and Family settings, click on the "Add or remove user account"
3. Click on any user account
4. Under the user account click on the "Go to the main User Account page" link.
5. Under "Make changes to your user account", click on the "Change security settings" link
6. In the "Turn on User Account Control (UAC) to make your computer more secure" click to unselect the "Use User Account Control (UAC) to help protect your computer". Click on the Ok button.
7. You will be prompted to reboot your computer - do so when ready
You may need to uninstall/reinstall Reader after the reboot in order for the problem to go away, but that part I am not certain of. Try to duplicate the issue prior to taking that step.
If you are unable to resolve issues with Adobe Reader, I recommend using a different reader that has much less bloat and is updated regularly:
http://www.foxitsoftware.com/pdf/reader/
FoxIT is a FREE alternative to using Adobe's Reader. Support for free Adobe products is limited forums such as this. The same holds true for open source alternatives except the manufacturer usually helps support their forums while Adobe doesn't monitor this forum or any like it. I know how important it is for you to focus on your classes so don't beat your head against a wall just because Reader won't work when a viable solution exists.
Best of success in your pursuit of knowledge!
Michael
>

Need Help in installations and connecting displays. Please!

Hello Everyone,
Need Help in installations and connecting displays. Please!
Im planning on installing in a cafe shop : (Store Self improvement)
4 TV's (can be Built in Wi-Fi) Store menus
2 touch screen tablets. To be use as Emenu (digital Menu)
1 60' TV ( Built in Wi-Fi) as Entrainment displays and in store advertising
What do I need to organize my project and make it looks cool and how to manageand controll all of the displays TV.

TNSTAAFL
I DO NOT work for Best Buy, Geek Squad and any way affiliated with them. I am a self-employed repairman. I specialize in TV's and desktop computers. I do not take sides. If BB is wrong I will say so. If you are a moron with a false sense of entitlement, then I will tell you.

I need help regarding installation of Netweaver 2004s

Hi,
I need help regarding installation of Netweaver. When ever i am running setup.exe, i am getting a page asking for local host and port number as 21212. When I enter my local host name and the port number as 21200 i am getting the error message given below and the installation stops. I am not able to proceed further. can any one help me what i need to do here. I created MS lookupadapter and entered my static ip address in 'host' file after 127.0.0.1 localhost and i disabled port number 3201 in system file. I verified system variables also. Everything is fine. I dont have firewall or antivirus installed in my system. Is there any thing else i need to do. please help me. Thanks in advance.
" SAPinst is getting started.
Please be patient ...
starting gui server process:
sapinstport: 21200
guiport    : 21212
guistart   : true
command    : "C:\j2sdk1.4.2_09/bin\javaw.exe" -cp "C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\instgui.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.6496.1162659801\jar\inqmyxml.jar" -Xmx256M -Dsun.java2d.noddraw=true SDTServer config=jar:sdtserver.xml guiport=21212 sapinsthost=localhost sapinstport=21200 guistart=true
load resource pool G:\SAP\Softwares\IDES mySAP2005\51031898\IM_WINDOWS_I386\resourcepool.xml
guiengine: no GUI connected; waiting for a connection on host (local hostname) , port 21200 to continue with the installation
guiengine: login in process...............................
guiengine: login timeout; the client was unable to establish a valid connection
Exit status of child: 1"
Regards,
Farooq Shaik.

Hi
Run the sapinst.exe with the port 21212.This port 21212 is the default port used during the installation of netweaver.

Need help with daq problem

Hi,
I need to generate a clock with a period of 20 micro seconds, duty cycle of
approx 20% and a data line as well as an address line all linked to the clock
pulse.
I have tried many different solutions, all using the Daq PCI-1200 but nothing
seems to work correctly. Usually the system bombs and I have to do a manual
reset to over come the problem.
Any suggestions?
Ken

Hallo, Ken,
Du meintest am 20.02.00 zum Thema Need help with daq problem:
> I need to generate a clock with a period of 20 micro seconds, duty
> cycle of approx 20% and a data line as well as an address line all
> linked to the clock pulse.
You'll need an external clock, expecially under Windows.
Windows ticks with appr. 18 Hz, and the CPU tick isn't always available
when Windows tasks multi.
Viele Gruesse!
Helmut

When trying to install Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

When trying to install Pro Tools 10.3.3 Aid Virtual Instruments I get a warning no mountable file systems. I need help fixing the problem.

Thanks Linc for responding to my post. I searched a little further and found I was missing a file. Once I downloaded the fix, I was able to install the software from the original download.

Need help with getResource() problem under weblogic 6.1

Hey all,
          I've got a serious problem that I can't figure out. This should be really
          simple - but it's alluding me. I have an ear file with a number of servlets
          inside it. This ear file also contains a resource that my servlets want to
          read from. This resource is located (within the ear file) at:
          "/content/structure/a.txt". The file contains raw ascii.
          To have my serlvet read from this file, I thought it would be as simple as:
          URL content =
          servlet.getServletContext().getResource("/content/structure/a.txt");
          // pw is an instance of PrintWriter
          pw.print(content.getContent());
          However, when I execute the above I get the following exception:
          java.lang.NullPointerException
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          at java.net.URLConnection.getContentHandler(URLConnection.java:979)
          at java.net.URLConnection.getContent(URLConnection.java:581)
          OK, so fine - I figure that I'm new to this. The documentation for the URL
          class tells me there is another way around this. It says that rather then
          calling getContent() directly, I can open a stream on the URL and read from
          that, like so:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          FileInputStream fis = content.openStream();
          but when I do this I get the following different exception:
          java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          Apparently this thing is trying to return a web-logic-specific stream (which
          is incompatible with an FileInputStream) - which I don't want to use or
          learn about since I want my stuff to work under other webservers.
          Can anyone tell me what I'm doing wrong? This should be simple.
          -john
          John Hilgedick
          WisdomTools, Inc.
          [email protected]


Wenjin,
          I appreciate your response. I tried treating it as a normal InputStream -
          but it didn't make any difference. Here's what I did:
          URL content =
          servlet.getServletContext().getResource("/content/structure/scenario2resourc
          es.txt");
          InputStream is = (InputStream)content.getContent();
          And here's the exception:
          java.lang.NullPointerException^M
          at
          java.net.URLConnection.stripOffParameters(URLConnection.java:1011)^M
          at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)^M
          at java.net.URLConnection.getContent(URLConnection.java:554)^M
          at java.net.URL.getContent(URL.java:807)^M
          at Utility.writeFileToOutput(Utility.java:134)^M
          You can see that it is definitely breaking somewhere in getContent().
          If you have any other ideas, I'd appreciate hearing about them.
          -john
          ----- Original Message -----
          From: "Wenjin Zhang" <[email protected]>
          Newsgroups: weblogic.developer.interest.servlet
          Sent: Wednesday, November 20, 2002 5:03 PM
          Subject: Re: Need help with getResource() problem under weblogic 6.1
          >
          > The "/" in getServletContext().getResource("/content/structure/a.txt")
          means the
          > web (WAR) application root, not your EAR root.
          >
          > The ClassCastException is because that content.openStream() is not
          FileInputStream
          > and has nothing to do with Weblogic. You should treat it as normal
          InputStream.
          >
          >
          > "John Hilgedick" <[email protected]> wrote:
          > >Hey all,
          > >
          > >I've got a serious problem that I can't figure out. This should be
          really
          > >simple - but it's alluding me. I have an ear file with a number of
          servlets
          > >inside it. This ear file also contains a resource that my servlets want
          > >to
          > >read from. This resource is located (within the ear file) at:
          > >"/content/structure/a.txt". The file contains raw ascii.
          > >
          > >To have my serlvet read from this file, I thought it would be as simple
          > >as:
          > >
          > >URL content =
          > >servlet.getServletContext().getResource("/content/structure/a.txt");
          > >// pw is an instance of PrintWriter
          > >pw.print(content.getContent());
          > >
          > >However, when I execute the above I get the following exception:
          > >
          > >java.lang.NullPointerException
          > > at
          > >java.net.URLConnection.stripOffParameters(URLConnection.java:1011)
          > > at
          java.net.URLConnection.getContentHandler(URLConnection.java:979)
          > > at java.net.URLConnection.getContent(URLConnection.java:581)
          > >
          > >OK, so fine - I figure that I'm new to this. The documentation for the
          > >URL
          > >class tells me there is another way around this. It says that rather
          > >then
          > >calling getContent() directly, I can open a stream on the URL and read
          > >from
          > >that, like so:
          > >
          > >URL content =
          >
          >servlet.getServletContext().getResource("/content/structure/scenario2resour
          c
          > >es.txt");
          > >FileInputStream fis = content.openStream();
          > >
          > >but when I do this I get the following different exception:
          > >
          > >java.lang.ClassCastException: weblogic.utils.zip.SafeZipFileInputStream^M
          > > at Utility.writeFileToOutput(Utility.java:134)^M
          > >
          > >Apparently this thing is trying to return a web-logic-specific stream
          > >(which
          > >is incompatible with an FileInputStream) - which I don't want to use
          > >or
          > >learn about since I want my stuff to work under other webservers.
          > >
          > >Can anyone tell me what I'm doing wrong? This should be simple.
          > >
          > >-john
          > >
          > >
          > >--
          > >John Hilgedick
          > >WisdomTools, Inc.
          > >[email protected]
          > >
          > >
          >

Need help for installation

Hello world,
I´m absolutely new in the world of SAP and just started lessons in ABAP on Netweaver 7.02.
Our teacher told us to install a mini SAP at home for training, so I download this :
SAP NetWeaver Application Server ABAP 7.02 SP6 64-bit Developer Edition
And this is my problem : I never installed a system like this before.
My Notebook have : 2.16 GHz, 8 GB RAM, 500 GB Harddisk
Did I need something else and how can I get it ?
How to start installation ?
Is there any installation guide ?
I'll be thankful for any advice.
Peter

Hi Peter,
This two links are help for installation
Step by Step Installation Guide for SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial Version
http://www.solution-soft.com/whitepapers/SAP/Time-Machine_Windows-2008_SAP-NetWeaver.htm
Regards,
Visu

I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??

I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

Need Help with Scrolling Problem

I have a JTree displayed in scrollpane. Based on search criterial I select the nodes where the search criteria is found. If the match is located off the screen further down into the tree, the node is highlighted but the scrollpane doesn't automatically scroll down to show it. Any help with this problem is appreciated.

Wow.. Thanks. I thought I would need some fancy code to handle this problem. scrollPathToVisible did it for me. Thanks.

Need help bad, screen problem

heres my problem. i setup arch on my desktop last night (64bit), i installed my nvidia drivers. i have a 21" crt sun monitor, not sure the model number. but i brought it to a friends this morning to update and install kdemod since they have highspeed. now i was hooked up to their monitor, they have a cheap 15" crt. so it worked fine there, now when i got it home, i get a black screen when it boots up on my monitor, i can get to a console however
i deleted a couple lines in the monitor section in the xorg.conf............so now i get 640x480 res, but i cant use anything higher
been searching around, and i found some stuff about running Xorg -configure, but i get something about a tmp file being locked..........and i dont know how to delete anything here from the console
i need help here
Last edited by ssl6 (2007-09-16 07:00:40)

nvm, i just deleted the xorg.conf and rebooted, its fine now
edit// nvm, its not using my nvidia driver.........i might still need help, im trying something right now, not sure what im doing though
ok, i tried to run nvidia-xconfig, and when i rebooted, im back to square one with my monitor flashin an invalid scan frequency
well, i deleted the xorg.conf again and got it booted up. but i generated a new one with nvidia-xconfig again, heres what i puts out, i just need to remember not to reboot any time soon. im using a 7900gs, the newest nvidia 100 series drive from the repo, and arch 64bit on this system by the way
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Wed Jun 13 16:54:14 PDT 2007
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
here's that part of the xorg.conf from my other computer running 32bit arch with a geforce 3 connected to the same monitor via kvm switch. this machine is using a 96xx driver though
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "sun"
HorizSync 31.5 - 82.0
VertRefresh 50.0 - 90.0
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 65536
# Insert Clocks lines here if appropriate
Identifier "geforce"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "geforce"
Monitor "sun"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
any ideas here?
Last edited by ssl6 (2007-09-16 07:53:48)

I need help with simple problems. im a student.

i'd like to be advanced with my studies so i will post questions.. i need help on how to answer. thank you.
1. create a java program that will evaluate if the value entered is a positive, negative, vowel, consonant and special characters.
im actually done with the positive and negative using if else statements.. i used an integer data type. now my question is how do conjoin the characters when i need to evaluate a vowel and a consonant. i cant use char either. please help. i dont know what to do yet.
2. create java program that will translate the input from numbers to words. e.g. input:123 output: one hundred twenty-three.
i have an idea to use a switch case statement. but i have no idea on how will i be able to do it. so if you guys can help me.. well then thankies..

Welcome to the Sun forums. First, please note that you have posted in the wrong forum. This forum is for topics related to Sun's JavaHelp product. You should post your questions in the New to Java forum.
As part of your learning, you will have to develop the ability to select an approach to a problem, create a design that reflects that approach, and then implement the design with code that you create.
So, it's inappropriate for us to take the problem statement that you have been given and short-circuit your learning process by giving you the implemented problem solution. We can comment on the individual questions that you may have, and point out problems and errors that we see in the code that you develop.
As a hint, when you are stuck, forget about Java and programming. Just start with a sheet of paper and a pencil, and figure out how to layout the task on paper. The consider how to translate that to programming.
If you have problems, post short example code that shows the problem, and explain your question clearly. We can't read minds.
Make sure you post code correctly so that it's not mangled by the forum software, and so that formatting is maintained. Select your typed or pasted code block and press the CODE button above the typing area.

Please HELP - APEX installation problem

Hi , someone can help me please to solve an installation problem of APEX ?
On the same machine ( with 10.2.0 Database installed) I installed Apx 2.2.1 . I follow all the installation step , but when I try to connect on http://localhost:7777/pls/apex I have this error :
"Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at localhost Port 7777"
on the http server log I found this error : mod_plsql: DAD '/pls/apex' is disabled because of misconfiguration. Please refer to the log entries during server startup for more information.
here's my marvel.conf configuration :
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "c:\oracle\product\10.2.0\ohs\Apache\Apache\images"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDatabasePassword apexpwd
PlsqlDatabaseConnectString localhost:1521:diana ServiceNameFormat
PlsqlAuthenticationMode Basic
PlsqlDefaultPage apex
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
On plsql.conf I already put this : # ============================================================================
# Database Access Descriptors Settings Section
# ============================================================================
include C:\oracle\product\10.2.0\ohs\Apache\modplsql\conf\marvel.conf
also on http.conf
include "C:\oracle\product\10.2.0\ohs\Apache\modplsql\conf\marvel.conf"
Can you help me pls to find the problem ?
thank's all
solo

solo,
I think your problem is simply that you're including the marvel.conf file too many times. You're now making it appear like the /pls/apex DAD is defined 2 or more times. And that would result in a misconfiguration error message.
Joel

Urgent Help is Needed for Database Installation Problems

How can we resolve the following database problems in Windows XP? Originally, we had Oracle 10.1.0.4.2, and we wanted to upgrade it to Oracle 10.2.0.1. We uninstalled Oracle Home ORAH1_DEV and then got the following problems while installing Oracle 10.2.0.1. How can we resolve all these errors so database configuration assistants can work successfully? Please help us with these ASAP. Thank you very much for your help and time in advance.
-Oy
These are the popup message we got.
POPUP 1. This appears 3 times, then ignore
Error in writing to file 'C:\OraHomes\ORAH1_DEV\jdk\jre\bin\awt.dll'.[C:\OraHomes\ORAH1_DEV\jdk\jre\bin\awt.dll(The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 2. Error in writing to file 'C:\OraHomes\ORAH_DEV\jdk\bin\java.exe'. [C:\OraHomes\ORAH1_DEV\jdk\jre\bin\java.exe (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 3. Erro in writing to file 'C:\OraHomes\ORAH1_DEV\bin\orancrypt10.dll'. [C:\OraHomes\ORAH1_DEV\bin\orancrypt10.dll (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 4. Error in writing to file 'C:\OraHomes\ORAH1_DEV\bin\oravsn10.dll'. [C:\OraHomes\ORAH1_DEV\bin\oravsn10.dll (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel
POPUP 5. Error in writing to 'c:\OraHomes\ORAH1_DEV\opmn\mesg\ensus.msb'. [C:\OraHomes\ORAH1_DEV\opmn\mesg\ensus.msb (The process cannot access the file because it is being used by another process)]
Click 'Help' for more information
Click 'Retry' to try again
Click 'Ignore' to ignore this error and go on.
Click 'Cancel' to stop this installation
buttons Help Retry Ignore Cancel

Grace wrote:
Yes, I have it installed in the same Oracle Home. Is it possible to create it there? Or I must create a new Oracle Home for the new installation? Please reply as soon as possible. Thank you very much for your help.
-OyA specific ORACLE_HOME holds the binaries for a specific version of Oracle. You don't upgrade by simply installing a newer version of Oracle into the ORACLE_HOME of an older version. If you tried to do that you have probably irreversibly corrupted the original installation.
And there is no URGENT or ASAP here. We are all volunteers with regular jobs. If you have "urgent" support issues you need to open a Service Request with Oracle Support.

Need help troubleshooting: booting problems

I'm a bit stuck troubleshooting and could do with some advice.
A quick backstory: my mid-2010 13" MBP started to refuse to boot and displayed the flashing question mark, so the Geniuses replaced the hard drive connector cable - which sorted the problem for a few months.
So the flashing ? reappeared and I've tried a few fixes but need advice on where to go now, I think it might be a RAM problem.
What I've tried so far:
I've tried erasing and then verify and repair the HD through disk utility, using the OSX DVD, which came up OK.
Reset NVRAM
Clean Install: the HD would show up, but would fail after 30 mins; "Install failed... could not copy the necessary support files."
Ran Apple Hardware Test: showed error 4mem/4/40000000 0xabd93398
Took out each RAM card separately, cleaned with compressed air, tried out each one separately in either slot - still get a flashing ? on startup.
Any thoughts on what I could do would be really appreciated. Thanks for any advice!

If the OS installer failed removing RAM will not fix the damage.
The question mark means a bootable OS couldn't be found. You will need to reinstall the OS & see if the Mac stays stable. You may need to do this with one RAM module to see if the other is causing the crash. The AHT message is a RAM error, re-run the test & change modules to see if it is a particular module or slot that causes it.
You can try booting from external disk to try to rule out the internal HD, but that isn't a practical solution for a laptop, it's more to help diagnose where the fault could be.
You could take it to an Apple store to see if they can help, but I doubt there will be any chance of repairs unless you pay. The first visit will be free, but there is a limited amount of testing that can be done.

Need help on installation problem

Similar Messages

Maybe you are looking for