Need help on model-choicelist of JHeadStart

Hi All,
I am very new to ADF and JHeadStart, i have developed HR application using jshtutorial1111.
my question is:
In Locations tab we can able to see corresponding countries list of location. Here i need to add Regions model-choicelist also, on selection of Region the countries list should refresh and should show selected region countries list only.
ex: if i select region as Asia then counties list should display only Asian countries.
i have tried so many ways but nothing is worked out.
can any one help me on this.
Thanks,
Madhu.

You should double check that this linked LOV is working in the model prior to using it with JHS.
Here is a recent example:
https://blogs.oracle.com/aramamoo/entry/how_to_create_multi_level
Good luck!
BradW

Similar Messages

Need help identifying model of a Treo

I rarely need a PDA, so I didn't replace the old M105 that died. A friend replaced a Treo she'd been using and gave it to me, but all I got was the device itself, the charger, and the USB cable. I'm having trouble getting it to load my contacts and calendar (for some reason it did transfer four items in a ToDo list!), and I can't even figure out what model it is, let alone can I find a user's manual. It is definitely just a PDA and not a phone.
On the back of the Treo is the following identification:
GMHED248700FX
What is it?! And what version of Palm software is required in order to get it to sync with the Palm software on my computer? I thought at first it might be a model 700FX, but I can't find that model listed anywhere on the Palm site, so clearly that isn't it. Is there any other way to identify it?
Thank you for any help!
Post relates to: None

Thank you! That certainly seems to be the one I have, and the age isn't important for what I need. Now, though, that leads to the next issue, which is that I can't sync my contacts and calendar, although I think I've figured out why for myself. Still, it generates another question.
I am currently using Palm v 4.2.1 on my desktop (Mac 10.4.11) I bet it's too new, isn't it? Is it going to be possible for me to back off to Palm 4.0 without losing the information that's currently stored in 4.2.1? I don't mind installing an older version of the software (and I found the download), but if it means losing my information, I'll just pass this free Treo on to some other unsuspecting person.

Need help choosing models and upgrades

Hi guys,
Basically I am stuck on a air few things with deciding what models along with upgrades to get. I am stuck between getting the MBP 15 inch 2.6GHz or the Retina 15 inch 2.3GHz. For starters I would say I want to use the MBP for general stuff like office and more complex programs like SSPS, surfing the net downloading movies and music and playing games like Rome total War amongst many other games etc. However, I think I have read the Retina display does not even work with all games?
Due to the relative low price I'm sure I will upgrade to 16 GB worth of RAM If get the Retina MBP as you can't upgrade them further down the line (*****). I beleive with the Retina MBP there is no disk drive, so i can't directly insert DVD's or Burn files onto disks etc, but this can be overcome by buying the Apple USB Super Drive, am I correct?
The Retina display only has 256 GB flash storage and that is kinda of low, will it more then enough for what I want to use the MBP for? What would that flash storage not be enough for?
If I get the normal 15 inch 2.6Hz MBP then I will upgrade the screen Hi-res glossy widescreen display as I like to play games and watch movies. Is it worth upgrading the hardrive the improve seed, efficientcy and power performance?
Overall what model would you say best suites my needs thanks?

Actually I have been doing further research and I personally would either go with the 2.6GHz NON RETINA MBP or cough up the cash and go all out on a 2.6GHz RETINA MBP and upgrade the RAM to 16GB and upgrade to 768GB Flash storage, I am a student as well so will get a discount which will help.
My fears are that if I get the Retina model I will not be able to upgrade it even further, I want to keep the computer for at least a good 5 years, during those 5 to 8 years will the current upgrades be enough to keep up with the top games and programs etc? Also I have read that repairing the Retina display model is very diffcult and it can malfunction commonly, so I am guessing I should get apple care on top of it just to be sure with this particular model?
I am assuming that they they will bring out the new models out next year and all the chinks and bugs of the current Retina model will be fixed so to speak, of which I have read there is a few... Would it be worth buying the NON RETINA MBP and then selling and upgrading to an improved RETINA MBP model next year?
Finally if i back up my files on a hardrive would I have to use the USP SUPER DRIVE to install files onto the RETINA MBP or can i directly do this without the USP SUPERDRIVE?
Thanks

Need help on Modeling

Hi BW Experts,
Currently i am using 2 ODS which is having header data and Item data ODS.
Header data ODS contains all the data related to header information.
Item ODS contains only the data related to Item (Material)
Sample data in header ODS.
Service_No______Created_date
80001___________10/10/2009
80002___________11/10/2009
Sample data in Item ODS.
Service_No______Material
80001___________MAT001
80001___________MAT002
I have created Infoset on header ODS and Item ODS
After running the query i am getting the data as
Service_no________Created_date_______material
80001_____________10/10/2009_________MAT001
_____________________________________MAT002
The Service Order No 80002 is missing in the report.Because service_no 80002 is not available in Item ODS.
in this Case, If i use multiprovider, i will not get data for material in the report.Because the info object material is not available in Header ODS.
In this case, how can i proceed further.
pls help on designing.
Thanks,
Siva.

Hi,
thanks for ur reply.
Pls tell which join condition i need to use to get both Service numbers (80001 and 80002)
Thanks in advance.
Thanks,
Siva.

Need help: Data modeler (Win7 64 bits) doesnt save screen resize ?

Hi,
using datamodeler in sqldevoper, i can create subviews for relational model
an add tables, but sometimes I want to resize screen (using zoom in, zoom out , or "fit screen" button), and then save datamodeler.
When model is reopened, all screen sizes are lost.
could somebody help ?

Hi,
All screen size states can not be saved.
We could add such option in the future.
Regards,
Ivan Zahariev

Need help for model c3-00.1

Please help me!
1) There are time when I push the down button the adjust volume screen comes up, when its to show my contact list.
2) How do you change the back light? Screen goes black after 30 sec..
3) How do I silence my phone (or make it vibrate) without turning it off. I have used the button in the bottom right hand corner, and it worked but no longer.
I hope someone can help me with these problems.

1 this is your navi key you can change this setting
2 the backlight will go of its a powersaving feature
3 press the menu key then scroll down list you will see silent profile
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Need help with modelling

Hi,
I have an u201CInventory Controllingu201D InfoCube (Cube 1) and defined queries on this InfoCube, which works fine. The time characteristic u201CFiscal year / periodu201D in this cube is derived from MKPF-BLDAT (Document Date in Document).
And I have another u201CPurchasingu201D InfoCube (Cube 2) and defined queries on this InfoCube, which works also fine. The time characteristic u201CFiscal year / periodu201D in this cube is derived from EKKO- BEDAT (Purchasing Document Date).
Now the requirement is to build a single query which reads few key figures from Cube 1 and other key figures from Cube 2. The time characteristics u201CFiscal year / periodu201D in this query must come from Cube 1. The Characteristic value variable on the time characteristics u201CFiscal year / periodu201D is Mandatory.
The other common characteristics Company code, Material, Plant in the query are available in both Cubes.
I have created a MultiProvider which contains InfoCubes Cube1 and Cube 2. I can assign time characteristics u201CFiscal year / periodu201D only from Cube 1. So I will miss the Key figures from Cube 2.
Both Cube 1 and Cube 2 contain a common characteristic u201CPurchasing Document Numberu201D. So I have tried to define an InfoSet on these Cube 1 and Cube 2. But it is not possible to define an InfoSet on the Inventory Controlling InfoCube.
Any clue to solve this problem?
Thanks

Hi
You can create one more cube CUBE3 which will take data from both the cubes Cube 1 and Cube 2 based on Purchasing document number. And then create a report on Cube 3.
Navesh

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited.

Hi!! I need help: I'd like to know how to obtain a communicaion between a PLC of ABB model 07 KT 97 and Labview 8.

Hi!! I need help: I'd like to know how to obtain a communicaion between a PLC of ABB model 07 KT 97 and Labview 8.I have to realize a scada system to control an electrical implant.I think that I need to learn more about OPC server: do you have some manual and tutorial to help me step by step in this configuration?And do you have some examples (one time PLC is connected and well configurated) to realize communication with Labview software?
thank you so much!!
please!!!Answer soon because I need help!!!

Hi Leoeffe,
I've found some documents that cam help you to understand how is possible to communicate
unsing OPC Servers and ho use them in Labview 8.
First of all I suggest to take a look to these documents:
How Do I Use OPC in LabVIEW?
http://digital.ni.com/public.nsf/websearch/EA15F53DB6FECCA5862567240064DF09?OpenDocument
Connecting LabVIEW to an OPC Server through a DataSocket Connection
http://zone.ni.com/devzone/conceptd.nsf/webmain/DF8C0A4BA2E2B22A86256A3700592BEA
Using the LabVIEW Shared Variable
http://zone.ni.com/devzone/conceptd.nsf/webmain/5b4c3cc1b2ad10ba862570f2007569ef
You can also use the Labview DSC module:
Developing Monitoring Applications with the LabVIEW DSC Module for Control Systems
http://zone.ni.com/devzone/conceptd.nsf/webmain/199c3fb9456a16d986256b5200678917
LabVIEW 8 DSC Simplifies Distributed Development
http://zone.ni.com/devzone/conceptd.nsf/webmain/d76c3788a0c4c5668625708b0072987c
Tools for Troubleshooting OPC Interface Problems
http://zone.ni.com/devzone/conceptd.nsf/webmain/401CB3A4E216356286256BC7004B5831
I hope all these tutorials can help you.
Best regards,
MarcoL

Need help about Hidden Markov Model model

I want to make classification for EEG signal using Hidden Markov Model
algorithm based on neural network.
plz need help about how to implement this algorithm using LABVIEW.
if not I want another thing to make classification.
any one know information about this topic, send me a reply
thanks

Have you derrived the HMM that you want to implement?
If so, post the algorithm and we can provide comments on how to implement it using LabVIEW.
Message Edited by Ray.R on 04-12-2010 12:54 PM

HT4623 cant find software updates on my iphone4 model MC605J.Need help please..

cant find the sofware update on my phone model MC60J
Need help please..

What happens when you connect the iPhone to the computer you
usually sync with and use iTunes on that computer to update the
iPhone?
What version of iOS is currently on your iPhone?

I need the SPICE Model for DS1809 or the component in Multisim. Help mee!

Hey people, I need the SPICE Model for DS1809 (Digital Potentiometer) for Multisim. Does anybody have this?? Or any idea where to get. I searched for, but I coudn't find.
Thank you

Hi,
As you can see in this link the part is longer manufactured and it does not have a replacement.
In terms of functionality, you can try using the component PLL_VIRTUAL in Multisim to replace it in a high level simulation or create a new component of a replacement that you have the SPICE model of.
Let me know if you need any help.
Mahmoud W
National Instruments

Need help with Toshiba model 42TL515U TV FAN

I recently had an error message pop up on the tv that says the tv fan went out. The tv has worked perfectly since i purchased it untill now. I'm very unhappy about it since i have taken great care of it the entire time and it is not my fault but toshibas for selling me the tv with a faulty internal fan and OF COURSE it tells me fan went out after my warranty just ended. I need help, answers and customer support because this is rediculous...

If there truly is a fan in the TL515U you can easily open up the TV, look at the fan specs, and replace it.
I bet the fan used in it are the ones used in computers.

Setting Up New FCP5 HD Bay -- Need Help

I'm setting up an HD edit bay for a friend, and I have a number of questions. Any help would be a godsend.
Basically, he's got a G5 with Final Cut Studio installed, a Motu audio interface, a Mackie Mixer, a Decklink Pro HD dual link, M-audio LX4 5.1 speakers, and a DVD/VHS recorder. He has one 250G internal capture drive, and one external 1TB firewire G-Raid. He's running a 23" and 20" Cinema Displays, and a Panasonic 32" HD LCD Flatscreen.
He wants to rent decks per project for capture and output.
My questions is this, how do we output to SD VHS/DVD or other formats for clients? Do we need a Switcher? Is it possible to do format conversion in Final Cut and output via Firewire instead of decklink to SD devices?
Also, is SDI (serial digital interface) cross-platform from SD to HD? Kramer Electonics has an interesting format converter that supports SDI, but will that change HD to SD? Here is a model number and link. FC-7402
http://www.kramerelectronics.com/indexes/item.asp?pic=71
Kramer also has a firewire format converter that looks interesting. FC-20
http://www.kramerelectronics.com/indexes/item.asp?pic=430
One of the Mac Vendors suggested the Blackmagic Multibridge Extreme, which sounds perfect, but costs $2000 - 3000.
I'm looking for a low cost alternative, if possible.
I really need help from someone experienced with this. I'm a freelance editor who cuts offline mostly on Avid for episodic TV, but my friend master HD out of his Mac edit suite. This is new territory for me.
Thanks in advance.

You should setup your local DNS to resolve only for the 'film.lab.' domain. Any requests that your local DNS will not be authoritative for should be forwarded to your district's DNS server. You should also set your local DNS to allow recursion only for clients on the 10.x.x.x subnet. The failure of clients configured to use your DNS for name resolution could be due to rules that have bee setup on your district's edge router to block outbound and inbound port 53 requests for all internal clients.
If you set your server and clients to use your district's DNS server as the secondary for your zone, you must make certain that any hostnames within your local zone are defined on your district's DNS to resolve to the private, 10.x.x.x, subnet that you will be running your systems on. If you don't -and your DNS goes down and there is no secondary defined on the clients that contains the zone info for your subnet- your clients won't be able to find any hosts. If you wish to run services that will be accessible from the Internet on your local server, this may require your network admins to make changes to routing to allow those request to be pass from the public network to the private one.
Also, if your district runs a central DHCP server you will need your district network admins to setup their DHCP server to return the correct client settings for your DNS and search domains for the clients within your subnet. If they do run a central DHCP server, do not attempt to set up a local one for your subnet. If you do, the probability that you will receive a very angry phone call from a not so happy fellow at your district is very high.

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

Need help on model-choicelist of JHeadStart

Similar Messages

Maybe you are looking for