Need help on rams to be compatible with my Spec

Hi I need to replaced my rams. Appreciate some advice here. Currently I am using DDR PC3200/400Mhz rams. As it's no longer economical/ value-for-money for me to get PC3200/400Mhz rams, below are the alternatives I am looking into since their prices are more cost effective than 400Mhz rams. According to my Spec, Intel 2.8Ghz Pentium 4, MSI motherboard 865PE Neo 2 PLS, 478 socket. Will I be able to use PC4200 533Mhz, PC5300 667 DDR2 rams?
Kingston DDR2 533Mhz 1GB
Kingston/Corsair DDR2 533 Mhz PC4200 1GB
Patriot DDR2 PC4200 533Mhz 1GB
kingston DDR2 PC5300/667Mhz 1GB
Compatibility and stability is more impt to me. I do not intend to overclocking. Appreciate anyone if you could help advice me on the timing as well for these suggested Rams w/o overclocking.
Thanks a lot.
Intel Pentium Prescott 4 CPU 2.8Mhz
MSI 865PE Neo2 PLS
1.5GB Ram (2x512MB, 2 X 256MB), 3-3-3-8 clocks at 2.6V
1 80GB SATA 7200rpm HDD
1 LG DVD writer
1 floopy disk
1 ATI graphic card 9550SE
PSU +5.5V 24A, +3.3V 15A, 12V1 12A, 12V2 15A

Quote from: Exo on 21-May-07, 18:23:34
You can't use DDR2 ram with that board. You need DDR1 PC3200 ram. Best thing to do is sell the ram you currently have and get a new dual channel kit as your slots are already full and further mixing will lead to problems.
Hi thanks for replying.
I don't intend to mix the existing rams that I have with a new replace rams. I will just install 2 x 1GB rams. So I need to know if my motherboard will be able to use 1 GB DDR2 533mhz or DDR2 667Mhz rams before I go and buy.
Really can't use DDR2 rams?

Similar Messages

Recently purchased a used IPad 2 but it still has previous owner's data. I've been told not to sync it to my computer as it will cause problems. What do I need to do to make it compatible with accounts on my mac and ipod touch?

Recently purchased a used IPad 2 but it still has previous owner's data. I've been told not to sync it to my computer as it will cause problems. What do I need to do to make it compatible with accounts on my mac and ipod touch? Thanks for any and all help!

You can wipe the iPad's contents completely by going to Settings>General>Reset>Erase All Content and Settings. This will remove all of the previous user's apps, data, settings and so on from the iPad and you can set it up as your own.

Need help on buying FIREWIRE/USB-compatible for Logic Pro 9.0.2 on my SL

Hi...Im in needs of help in my new OS Mac World.Had my Logic Pro 9(9.0.2) install in my Snow Leopard(10.6.3).Need help on buying FIREWIRE/USB-compatible for Logic Pro 9.0.2 on my Snow Leopard.Just a real basic audio interface that works with my Macbook pro Specification.You're help will be much more appreciated..
Best Regards:RatzyMazzy

In any case I would suggest to get an audio interface which is *Core Audio* compatible. This means that you just need to plug it in and it will work with OS X’s integrated driver. I once had an M-Audio interface which needed its own driver and it had latency problems because of them. I am currently using the EDIROL FA-66 with 10.6.3 on my MacBook Pro. It still works flawlessly and has worked without problems in the past with 10.4 and 10.5, too. Here is how it looks like: http://www.rolandus.com/products/productdetails.php?ProductId=731
I have also heard good things about the FireWire interfaces from Presonus, like the FireBox.
Björn

I am purchasing an Imac and used to use Windows Vista. I have a HP Color Laserjet 2840 and need to know if it's compatible with Mac OSX? If not, what printer is?

I need to know what printer is compatible with Mac OS X operating system. I have a HP Color Laserjet 2840

Your HP Color Laserjet 2840 is compatible to Mac OS X.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=de &prodNameId=445197&prodTypeId=18972&prodSeriesId=445194&swLang=18&taskId=135&swE nvOID=4082

The Super Talent memory ram W1600SB8GM is compatible with the model MacBookPro MD103E/A Mid 2012

The Super Talent memory ram W1600SB8GM is compatible with the model MacBookPro MD103E/A Mid 2012

If you can buy from Crucial, Amazon or macsales (OWC), I would (I know that Crucial and OWC ship internationally but I don't know about Amazon). Both have lifetime guarantees for their products and should not be affected at all during shipping.
Amazon has a better price on the Crucial RAM than even Crucial, by the way.
Clinton

I need help choosing RAM for MSI PM8PM-V 7222 VER. 2.0 MB

hey everyone as you know my MB is in the subject and i need help buying ram for it. on the MSI website it says it can surpport max. 2GB so 1GB in each slot? it only has 2 slots also what DDR and MHZ clock, DRAM fequency etc does the ram have to be and both single sided or double sided or 1 single and 1 double?
thanks

Quote
also what DDR and MHZ clock, DRAM fequency etc does the ram have to be
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&prod_no=1039
Quote
• Supports DDR2 533/400 memory interface.
Check the memory support list for best compatibility:
http://global.msi.eu/uploads/test_report/TR10_1039.pdf

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c

Need help Connecting Crystal Reports 8.5 with GBS Agency Expert 6.7.6c. I need assistance on connecting these together so I can run a report. I am not an IT person so if someone could dumb it down it would be great.
Thanks,
NBGHealth

Hello,
I assume GBS Agency Expert 6.7.6c is some sort of database or data source? If you have an ODBC driver then create or use a System DSN to the database. Then you can create a report using that DSN.
Otherwise I suggest you contact the makers of GBS Agency Expert 6.7.6c and ask them how to connect to the database.
Let them know CR is ANSII 92 ODBC 3 compliant.
Thank you
Don

Need help Please. Which play nice with macs? Palm Treo's Or Tmobile MDA?

Hi all, I post on here from time to time, but hardly anyone ever answers my questions. Here's my dilema. I bought a Tmobile MDA over the weekend that runs microsoft windows mobile 5.0. And while playing with it have noticed some things about it that i think are'nt that good. For example, I like the fact that its a windows os, but think that it's flawed. I have done quite a bit of research but don't think that it's active sync software is even compatible with mac osx. so have'nt even tried to mess with it. now i'm still in the 14 day window and am thinking about returning it. but here's the thing....
I know that tmobile has EDGE, and it's considerably slower than verizon or sprints EVDO. (since i've researched it i know that edge is around the 70-170KBPS range when EVDO has 300-700KBPS) And tonight i was messing with this tmobile MDA and finally got it to work to connect to the net with it using bluetooth and it's "modem" ability to connect it to the web. But it S U C K S! i went to and did a bandwith test and i was only getting like 12.1-27.1kbps download (after running 2 tests) dude, it feels slower than dialup!
so with that bullet against it, comes the compatible part. I can't sycn this thing with my mac for NOTHING! do any of you out there have a palm treo? (either verizon, sprint, or att.... carrier X?) How does it sync with your mac? is it hard? any extra software i need to get/buy? have any of you used it to connect to the net? and if so, how's the speed? And here's an even bettter question... How long did it take to config it to work using the phone as a modem? Did you use bluetooth? or serial link? was it easy to config? Where did you find the instructions?
I know these are a lot of questions, but this is a large investment for me. I mean this thing ain't cheap and it does'nt really play nice. I don't mind paying a little extra, for some peace of mind, and knowing that it won't crash often and will work with my mac. Anyone out there got any other suggestions? I would really appreciate it. I would like your opinion on which one is the easiest to use that plays nice with a mac, and has a interface that's almost as nice. Thank you so much for your time. I will be following this post closely and comment you all back for your replys
Mac Book Pro 1.83 GHZ 512 Ram Mac OS X (10.4.5)

It really is a toss up cause Ive owned two Treo's and Ive read extensive reviews on Windows mobile devices and it seems to me like they're pretty similar in the way of hardware and software(minus the fact of using different operating systems). So I think the determining factor really ought to be more focused on how much you're willing to pay, and the level of support you get for each device. I recently got rid of my Treo 650 due to an interesting touchscreen problem and got a windows mobile device(should come tomorrow)
in the way of syncing with a mac:
The Treo is extremely simple to set up and use with a Mac(keep in mind Im not talking about the 700w/wx)in every aspect. Palm provides OSx compatible software(though its almost impossible to get rid of after installation). However, in my experience, Palm does not really do a good job in the customer service department. While they have a rather extensive support page for each device(some of the info is outdated), that's pretty much all you get unless you don't mind spending hrs scouring various forums. Talking to customer service is a joke. Like I said I had a problem with the touchscreen and the best the rep could give me was "try a hard reset" and "send it in for repair".
I have yet to experience what windows mobile will be like. At the very least with syncing, theres syncing software made by people who had OSx in mind(ie: Missing Sync or Pocketmac) who will probably be able to help out a lot more in this area and possible also be able to help out with the other issues you mentioned.
a good place to check out would be howardforums.com, you'll probably get better answers there.

I need a step motor and controller compatible with LabView Can you recommend any

I need a step motor compatible with LabView and I thought i would check with you before i moved forward in my experiment

Dear chapbs,
I've attached a sample cart below to show you the components for a possible setup of your system. Keep in mind that whatever stepper drive you purchased would power your motor. If you go ahead with the purchase of a controller & drive, I would highly recommend contacting NI to insure that you purchased the correct accessory components and cables to connect & power the components. I hope the sample cart is helpful. I created it by browsing ni.com, adding items to my cart, and then saving the cart to an excel file. Please post back if you have additional questions.
Best Regards,
~NH
Attachments:
SampleCart.pdf ‏145 KB

I have a godaddy website with a welcome page- I need help adding a few additional pages with a hyperlink to my welcome page.

I need help attaching a few hyperlinks my godaddy welcome page. I have 2 more ipages articles, I also converted them to pdf. Godaddy only helped (last year) with the 1st article. I do not know how to attach a hyperlink to the artlcles and add the hyperlinks to my welcome page.

The program is called Pages not iPages. Just let us know if you do not speak English and what language you do speak so we can adjust for that.
The issues are to do with your web page not with Pages.
I think you are asking how to link from your web page to your pdf articles. You must first copy those pdfs to your web server, or some other web location, and then provide html links on your welcome page to those pdf files.
The pdfs themselves may contain links to other locations but I can not see that that is what you are asking for.
Nor to what those links would be to.
From your heading I think you may have confused the name of Pages, the word processing program, with web pages which are two different things.
Peter

Jds-help and Solaris Management Console compatible with jdk6u1?

Hello,
I am running Sol 10 11/06 for sparc on a Sun Blade. I just upgraded to jdk6u1 from jdk5. I installed all required j6 packages, and then installed patches for j6u1. I then used pkgrm to remove all jdk5-related packages (I searched for all packages starting with SUNWj5 and then removed them). Java seems to be working fine.
Now, my Desktop Overview and other java-related help functions do not work. I get this error:
# jds-help ghelp:jdsoverview
** (jdshelp:826): WARNING **: An exception occured 'Unknown CORBA exception id: 'IDL:omg.org/CORBA/COMM_FAILURE:1.0''
A large jre error log is produced that mentions a problem with JVM:
# An unexpected error has been detected by Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xfc94dd6c, pid=1338, tid=1
# Java VM: Java HotSpot(TM) Client VM (1.6.0_01-b06 mixed mode, sharing)
# Problematic frame:
# V [libjvm.so+0x14dd6c]
Solaris Management Console does not work either, and gives an error that no suitable java 2 version is installed in /usr/java.
Maybe I removed a j5 package I shouldn't have. Which j5 packages are related to the operation of jds-help? Any ideas as to what is causing my problem with jds-help and smc?
Does anyone know FOR SURE that jdshelp and smc are compatible with jdk6u1?
Thank you...

I got rid of jdk6 and re-installed 1.5.0.11. Solaris Management Console 2.1 works again, so it appears as if smc and Sun Studio 11 are both INCOMPATIBLE with jdk/jre6.
jds-help still does not work, with a jvm error, so perhaps it is also incompatible with jdk/jre 1.5.0.10+.

Need help connecting to 360 and pc with internet

im new to using routers and i lost the manual and the box and i need help using the router the model number is NH1005,V2 fast ethernet 10/100 5-port Hub and it is a linksys so can someone help me im confused and i need the ip addreess or something
thanks in advance

Hi....
A network HUB is a network device that is used to connect multiple computer so that they can share the resources. In more general way a hub can be defined as a common connection point for devices in the network.
There are hubs that can be managed by an administrator. In case of NH1005 it is not a manageable HUB. Connect the devices to the HUB and if the devices are properly configured they will communicate with each other.

Need Help! No Video Just Audio With .AVI Files

i got quicktime for my iPod, just only for that cause i think that quicktime really *****... i searched this whole site for an answer. i found something i thought would solve my problems with .avi files but my .avi files are mpeg-4 layered, and there's only a descent answer for indeo files? or something like that. i really need help cause i want to convert an ordinary .avi file to iPod extension... please please help!!!!!!!!!!!!

There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
If you want to try "hit and miss", you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you

I am trying to open an interactive chart but I am getting a message saying i need flash and it is not compatible with the iPad, is this correct or is there some way around it. Thank you.

I am trying to open an interactive chart but I am getting a message saying I need to install flash but it is not compatible with iPad, is this correct or is there some way around it. Thank you.

Flash is not supported on the iPad - and as Adobe have never managed to make a version of their flash player that works on iOS devices, and they have recently announced that they are stopping development on all mobile versions of it, it probably never will be
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store.

Need help! i have a problem with apple tv, airplay.

I have a macbook pro mid 2012 with Mac OS X Lion 10.7.5. i recently bought a apple tv, i can connect to it with my iphone 5 and with itunes on my laptop, but the airplay icon doesnt show on the "dock" or whatever its called.
Anyone help?
my mac should be compatible with airplay.
excuse my poor english writing..

http://support.apple.com/kb/ht5209
http://support.apple.com/kb/ht4437
http://support.apple.com/kb/TS4215
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
 Cheers, Tom

Need help on rams to be compatible with my Spec

Similar Messages

Maybe you are looking for