Need help on setting up router

Hi, I have a WRT54G wireless G router. I have a problem connecting to the internet through the router. If I connect an internet cable directly from my modem to my laptop, the internet works fine. If I connect the modem to the router and the router to my laptop, the message on my computer says 'limited or no connectivity'. I have set to detect IP and DNS automatically on my laptop.
Even when I use the linksys EasyLink, it says it does not support my router. In the router setup page, the setting is set to 'Automatic DHCP'. Why is the problem? Can anyone help me? Thanks!

You just need to set one up and everyone uses that password to connect to your network.
Read this article here
Setting-Up WEP, WPA or WPA2 Wireless Security on a Linksys Wireless Router
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

Similar Messages

Purchased extreme to replace modem/router DSL used telephone cord need help with set up

Prior to purchasing Airport Extreme had a standard modem/ wireless router from ATT for DSL. I have two macbooks both dropped connections while online with older modem.
Airport Extreme purchased to correct connection issues I need help with set up. The older modem just used telephone cord. I tried to use telephone with extreme it did not work.
How do I get extreme to work as the modem and router ?

How do I get extreme to work as the modem and router ?
you can't. the extreme is only a router. you need a separate modem (or disable the wireless part of your old router and use it as a modem - if that's possible).

I need help in setting up a wireless connection

I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMay

NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99

Need help w/ setting up ports to run a server for America's Army

Need help w/ setting up ports to run a server for America's Army. I read wat u need to change the ports but i dont understand wat to put. here is wat the site says
Q: How do I run my own server?
A: Quick and dirty server info:
1. Edit RunServer.bat to change the map.
2. Run RunServer.bat
Or:
server.exe LAN MAPNAME.aao (Host a LAN game)
server.exe global MAPNAME.aao (Host a Public game)
Also: When you create a server setup and want to allow other users to join your server, you need make sure the following ports are open for outgoing and incoming traffic in your firewall: 1716 (UDP), 1717 (UDP), 20025-20045 (TCP), and 20047 (TCP). Failure to open these ports will prevent the server from accepting connections from other players or prevent other players from being able to see your server online.
There are several settings that also need to be defined in your server configuration INI file (in the Windows version, these files are located in “My Documents\America’s Army Server Settings\{settings file name}.ini”).
[Engine.GameEngine]
ServerActors=Andromeda.AndromedaMBS
[Andromeda.Andromeda]
GameServerIp=
Make sure that you set the actual IP address of the America’s Army Server under GameServerIp= (for example, “GameServerIp=000.000.000.000”). The supplied address must be your actual internet IP address, if this is left blank or you supply the IP address for your internal network (such as 192.168.0.x), your server will not be able to accept connections from the internet.
If your server.ini file contains the setting shown below, please change the QueryPort setting to 20025. This setting can also be removed, as the default setting is port 20025.
[Andromeda.AndromedaMBS]
QueryPort=20025
Punkbuster user fix correction.
If [Engine.GameEngine] block has been changed to read as below:
[Engine.GameEngine]
ServerActors=IPDrv.AndromedaMBS
Please add the following block to your INI file:
[IpDrv.AndromedaMBS]
QueryPort=20025
(Last Updated: 2006-04-20)

Your images are not stored in the catalog. They are stored in folders on your computer. If you imported images that were already on your computer using the "Add" Option they are still in that same folder. If you imported images from your camera then they are in the folders that you specified when you imported. The catalog points to those images wherever they are located, and records all of the adjustments that you make to the image. When you send an image to Photoshop for further editing and save that image in Photoshop, it is normally saved back in the same folder as the original image.
Images are not "saved" in Lightroom. The basic default workflow in Lightroom is to store all of the adjustments in the catalog, leaving the original image completely unmodified. The catalog becomes the central controlling mechanism. It is a database that contains pointers to where the images are located and a record of all adjustments made to those images using Lightroom. Properly managed, you only have those original master files and secondary files for the ones that you have sent to Photoshop for further adjustment. When you want to provide a copy for someone else, you use the export dialogue for that purpose. I often export JPEG images to share with others or to post on the web. After I have usedthe JPEG for its intended purpose I delete it.

Downloaded Epsom printer app need help to set printer up on iPad 3

Need help to set up Epsom printer to ipad3 downloaded Epsom app can find the printer but don't know where to set up

It's Epson, not epsom. Epsom refers to epsom salt (magnesium sulfate).
... Anyway, iPads don't have printers directly set up. You might interface with a printer over a WiFi. That could be done either using Apple's AirPrint (if the printer is new enough) or maybe you have Epson's iPrint utility.
If you have the iPrint utility, you simply open the utility, click the "maintenance" button in the lower left, and select the "Printer" on the top and set it up there.

Need help to set up my exsisting paypal account

need help to set up my exsisting paypal account

Did you have a look at the document listed here
http://forums.adobe.com/community/formscentral/payments?view=documents
Gen

HT5312 I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

I want to purchase an APP on my ipad. When I enter the answers to the security question, it comes back invalid. The answers are correct. I need help re-setting my answers.

 Account Security Team (AST) 
Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.

I need help with setting up my Sun Java Studio Creator

Hello all, i need help with setting up the Studio Creator, i"m new to all that staff so is there anyone to help me just a little with all that if yes email me at [email protected] or get me on AOL Instant Messanger with the screen name: wretch17
thanks :-)

Hi,
Welcome to the Creator community! Thanks for your interst in Sun Java Studio Creator. Please feel free to post any question related to creator on this forum .
Take a look the creator website at
http://developers.sun.com/prodtech/javatools/jscreator/
CreatorTeam

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

Need help with setting up VPN on a Cisco EPC3925 Modem

Hi everyone,
I need help setting VPN on Cisco EPC3925 modem (I tried using Help and I have read the entire section in the manual but the manual is not the same as the window I get in my settings. For example in the manual they say I can choose "all" under Remote Secure Gateway but there is no option like that).
When I go to the VPN section this is what I get:
1. Does this mean that I can connect to my modem via VPN from some other location? I would like to be able to connect to this modem when I am not at home from some remote location from my computer in order to be able to use NAS-Storage.
2. If the answer on the first question is yes, what settings I need to enter for the:
Local Secure Group
Remote Secure Group
Remote Secure Gateway
My ISP is using dynamic IP but I have DDNS.
My router local IP is 192.168.0.1
Subnet: 255.255.255.0
Starting IP Address: 192.168.0.10
Here is how the advanced settings looks like:
Thanks in advance for your help!

My problem similar too this. I create a tunnel between two epc3925 but impossible to send data between them.
The status is connected. What can I do? UPC tell me this router has only vpn client so i will doesn't work.

I need help picking a wired router

im tired of bringing my computers modem upstairs everytime i wanna go on xbox live because then when my sis or mom needs to use the internet i have to bring it back downstairs so i wanna have a really good wired router i can keep upstairs in my room so i need help picking one

The reason gaming and wireless don't work is because wireless does not transfer large packets of information which is what gaming uses. The best thing to do if you want wireless is to get a gaming router they will send larger packets of information and they also have dual ban gaming routers which will allow you to set up to where you can connect on one signal and your mom or sister on another it will make it much better for all of you in the long run.
Brandon
Best Buy Associate | Geek Squad Agent
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

Need help to set up file and print sharing

i just bought my router and i needed help setting up file and print sharing i am using windows xp on both of the computers one is a desktop and the other one is a laptop

Here
Enabling File and Printer Sharing
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

NEED HELP PLEASE Setting up 2 VLANS and a redundant WAN connection

I have a remote branch office which is actually a huge bar/lounge. The bar wants to enable patrons to access the Internet with their wireless laptops. I want to prevent those patrons from accessing our private network, and also prevent them from traversing our static VPN tunnel back to HQ.
The bar processes all credit cards via the T1 connection, and this has caused us to lose money every time the T1 goes down while we're open, since there is no WAN redundancy right now.
Here is my current hardware configuration:
1) one PIX 501 50-user 3des.
2.) two Dell 3024
3.) one Aironet 1100(g) AP.
Current LAN Network: 10.35.35.0
(internal employees only, static VPN tunneled to remote HQ network)
Current Wireless SSID's:
SSID1=PRIVATESSID
SSID2=PUBLICSSID (not currently in use, waiting to figure this out)
Current WAN: one T1 connection.
WHAT I WOULD LIKE TO DO AND NEED HELP FIGURING OUT:
#1a) I want to create two separate VLAN's that are able to share the WAN connection, but not be able to "see" each other.
#1b) These VLAN's would be mapped to their respective SSID's on the AP (PRIVATESSID>10.35.35.0 and PUBLICSSID>192.168.1.0).
#1c) The 192.168.1.0 network should not be able to traverse the static tunnel between the branch site and HQ.
#2) I would like to install a backup WAN connection such as a modem 56k dial-up to an ISP or a cable modem to an ISP. In case the primary T1 goes down, I would like the router to automatically dial out over the modem conection and route all Internet bound traffic over that backup WAN connection, until the primary comes back online.
Question 1:
I'm assuming I need a router to do the intervlan routing. Could this router also do the on-demand WAN backup dialing to an ISP via analog modem?
What IOS version and flavor (IP base, IP+, etc.) would I need? What is the cheapest router I can do all that with (i.e. 2620/2621/1720/3600 series)? What WIC's or NM's would I need?
Question Two:
I would like to prioritize PRIVATESSID's traffic over PUBLICSSID's traffic, which I know I can do on the access point. Can I do this on the router so that any 10.35.35.0 traffic takes priority over any 192.168.1.0 traffic?
Question Three
If the primary T1 WAN connection goes down, I don't want the router to re-route the 192.168.1.0 traffic over the backup 56k dial-up WAN connection. That traffic can wait until the T1 comes back up.
Any help you can provide would be very much appreciated.

Assuming your access points can place SSID into separate vlans and support 802.1q trunks then I can attempt to answer your questions. There are seperate secuity issues with both SSID for protection and VLANs for seperation but in your case in may be minimal.
q1
Any cisco router that will run 802.1q trunking will work. Since you are looking at older routers you will need IP+ to get it. Even 2610's will support 802.1q on their 10m ethernet at the correct code level but 10m and 802.1q is sorta nonstandard. Since your backup is only 56k you can use the internal modem port as a dial backup. A wic-2a/s will also work if you prefer not to use the modem port. You will need some wic to run your t1 line. If you are planning to leave the t1 on another router it makes the next 2 questions much harder.
q2
This is fairly simple and depends on your ios level. "priority queing" is supported on even the older software. I assume you do not control the far end of the t1 line since it sounds as if this goes to a ISP.
You will need to have them do the QoS since most issues with the internet are inbound and not outbound. You can only control outbound traffic.
q3
If the T1 is on the same router then this is fairly simple. You can just put a floating static default route in that will cause the dialer to come up if the the t1 goes down. There is no easy way to protect against the line being up but no traffic passing. This is also why it would be best to have the t1 on the same router. If its not you will need to get very creative to solve this. You could build a GRE tunnel to a remote location and montior the tunnel or run a routing protcol over the tunnel. In the newest software you could use SAA and policy routing to force the traffic over the dialer but the router must support ios 12.4.
3a. You mentioned a cable modem as a backup. That can be much easier sometimes since it is all routing and no dialer interfaces with nasty modem issues. This does not make the issue of the t1 not on the same router easier.

Need Help with setting up this Filter

Hi,
I need help making a filter sound like the one used in this youtube song.
I tried setting it up but I've had no success; even though I know for a fact that this filter was made in Logic Pro 9 according to the maker of this song.
I think there might be a bit of 'Fuzz-Wah' in there too but I've never really used that effect so any tips on that would be great, too.
Link: http://www.youtube.com/watch?v=tf017M8SZZE&feature=plcp
Any help with this would be widely appreciated.
Thank you :-)

It sounds like a simple hi Q filter sweep to me but getting close to the original synth sound that it is being used on is the challenge. It might well be that it is the filter on the synth itself is what is being swept. Either way, turn up the filter resonance on a band pass filter and sweep it with the lfo or adsr to modulate the filter cutoff if its the synth filter, or automate the filter frequency sweep if you use the channel filter.

Need HELP with setting up my email on new 4g ipod touch.

I need help setting up my email on my 4g ipod touch. I just got it today and had a 1st gen and it worked fine. I need help setting it up again.
Any help would be appreciated
Thanks in advance.
Pam

http://www.apple.com/support/ipodtouch/assistant/sendmail/

Need help on setting up router

Similar Messages

Maybe you are looking for