Need help on something...

well, i don't know where to ask but here...so I downloaded an app called Carbon Copy Clone and said that my memory card wasn't right and need to change it....so i went to disk utility and clicked my memory card, the clicked "Partition" selected "1 Partition" , then "Options" the selected "GUID Partition Table" then click apply....but then it didn't work on cloning so i deleted the files on my memory card and put it back on my camera, but it says "Memory Card Error"....how do i return it to like factory settings?

ĵøΗπ: What were you trying to do to or with your memory card in the first place? That would be an important thing for anyone to know in order to help you.
The only thing you should ever do with a camera's memory card while it's connected to your Mac is copy the pictures from it to the Mac. Don't delete pictures from the card, reformat it, partition it, erase it, edit the pictures on it, or copy other pictures or files onto it while it's connected to your Mac. If you do, the odds are very good that your camera will no longer be able to use it until it's reformatted *in the camera,* as S.U. has suggested above.
If you have a memory card that is not used in a camera, it can be treated in many respects as if it were a hard drive or flash drive.

Similar Messages

I have need help with something Please respond Quickly :)

I have need help with something Please respond Quickly ok so i have the linksys wrt54g Version 2.2 and i upgraded the firmware to V4.21.4 from this site http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G and i clicked V2.2 for the router. So after i upgraded i lost internet ability i can't use the internet so i had to downgrade back to V4.21.1 but i want the things that newer update sloves. Please Help. Everything thing says DNS error? aka Modem.
$$Cgibbons$$

Ya i tried that i tried restoring and redoing everything when i downgrade back to .1 it works fine though?
$$Cgibbons$$

Hi i need help with something

hi i need help with somthing

Welcome to the user to User Technical Support Forum provided by Apple.
Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it.

I need help with something could some one help me with installing windows 7 on bootcamp 4.0 with iMac 2.8 ghz model

could some one help me with something important i have a 2.8 ghz intel quad core Imac with 10.7 with bootcamp 4.0 but still getting that black screen while trying finish the install of windows 7 etc. or do i need a new mac for it to work properly

This might help point you in the right direction.
http://support.apple.com/kb/HT4818
Hope it helps
Also google it and lots of results come up including youtube clips....

I need help! Something about playlists

Hey there, I connected my iPod to my pc about a week ago but I had too many songs so it automatically created a playlist which did not select all the songs. I then deleted some songs from my library and deleted the playlist, but now when I try to update my iPod it says, ipod cannot be updated because all the playlists selected for update no longer exist, or something like that. Whats worse I now have no songs on my ipod! Arghh! Can anybody help me I aint much good with PC's so help would be much appreciated!
Thanks v.much!

When you plugged in the iPod and had more music in your library than would fit, it created a new playlist which would fit.
You deleted this playlist but the iPod is still looking for it.
As Robert stated, there are a few options.
You cna do what he suggested.
Also, you can set it to Sycn all music.
It will create a new playlist as before that fits on the iPod and set it to Automatically sync only selected playlists.
I just create a Smart playlist and set ti to pick music at Random and limit it to the size of the iPod (a 4GB iPod is ~3700 MB).
When I want new music, I select the playlist, select all the songs an dpress Delete. It will fill up again automatically.
Then I plug in the iPod to sync the new music.

I need help with something! Technically my money is being used!

A few years ago I had to let a (I think)5 year old use my apple account since for some reason one could not be made on his ipad mini. I have a game called clash of clans and it saves your process from your game center. What I think has happened is that the kid has been downloading more and more games and happened to have stumble across Clash of Clans. If it is a new device and Clash of Clans has not been downloaded on it ever and/or doesn't have a saved village then when it is downloaded a new village is started. But since it is my game center and my village has already been saved on there, he is asked if he wants to replace the current village with mine. Its been almost a year since I've seen unknown and strange activity, (my cousin has access to my account too but i trust him and i know it isn't him) but now he has taken it too far. There is a special currency in the game called gems. Gems can be bought with money, but i chose not to buy any and to just gradually earn them. I had around 750 gems which is about 1 1/2 of what you would get out of a $5 payment. Now I have about 300. Technically he is using my money. I don't know for sure that it is the kid, but what im asking is -if possible- to removed my saved village from all devices that way he no longer has access to it. Then after that i can log back in and get my village back while he can't since he does not have access to my account anymore.

I woudln't recommend you try to pull this off yourself in a single flattened layer as you're basically talking about something like Pixel Bender effects which aren't on the beginner side to implement. Animating them in flash on a timeline is more your level.
You can also do a simple google search for plugins (free for commercial) to help achieve the effect but it will come down to some coding. Depending on the plugin that coding may be simple or difficult. As they say, anything worth doing is worth doing right and that requires some experimenting and perspiration .

Need help with something...

Hey guys, need some help with this, try to keep up with me here...
I opened up illustrator cs4 and drew individual items (three items) and drew all three on one artboard and saved it as a standard .AI file.
On each of the three items, one at a time I used the selection tool and selected each one and went to Edit>Copy in Illustrator.
Opened photoshop cs4 and set up a new blank document letter size, in photoshop cs4 went to Edit>Paste and I pasted each item as pixels into photoshop. Keep in mind that each of these individual items I have pasted are obviously vector images. After placing the Illustrator files (that are now pixels in photoshop) I saved everything as .TIFF format in photoshop.
Opened up InDesign and opened the TIFF file I just saved and placed it in InDesign as a TIFF file (raster).
My question is a format question, now that I have images that I drew from Illustrator in a Photoshop TIFF file that has been put into InDesign, if I sent this to a printer would it print properly as I see it now? I ask this because I know in the past you guys have said that vector will not print unless it is in Adobe PDF. Did I do this right or should I have saved the three Illustrator images separately as Adobe PDF files and just placed them as individual objects in InDesign?

I remember Jongware, it's come in handy!
Peter, I think bridging these files from one program to another just confuses me. What I guess I was thinking was I could create the single files in Illustrator and drop them as pixels into photoshop because then I could impose them in front of my backdrop (I created a backdrop with other images in photoshop) and thought it would be easier to just save it all as a TIFF file and place it in InDesign. So when I copied/pasted from Illustrator into photoshop, when I chose place as pixels it rasterized a vector image am I thinking right? Truthfully, I just don't know what I'm doing and trying to do it out of convenience. The end result I always try to do is make sure it shows up right in print with no less than 180 resolution because its' hard to find stock photos on the web without a watermark or decent resolution.
Eugene, I knew that Jongware and a couple others mentioned the Adobe PDF format from Illustrator but I couldn't remember if .AI format would work or not. I know in the end you just end up converting everything to PDF.
The way I was taught in school was in the simplest of terms, create custom art in Illustrator (when applicable), alter/enhance stock raster images in photoshop, and then you finish up and place/format in InDesign. My biggest problems really are understanding what format belongs where and when for print and I can't seem to find high resolution pics that work well in my documents, get them as JPEGs in google images.
Anyways, thanks again guys! Still learning, thanks for putting up with me!

HT1430 hi i need help with something

hi Ineed help with something

i disabled my phone and its saying connect to i tunes and i have no idea what to do i need to enable my phone cause its been like this for a week

HT3702 i need help paying something in the app store. Do you guys know how to do it??

Right this is how it goes. I spoke to someone online who helped me a few days ago but i have forgot how to go about doing it But the thing is i need to pay some money to them. How do i go about doing that?? Pleas could you guys help me?

Are you asking how to set up an iTunes account?
If so, here is a support article with all the scoop:
http://support.apple.com/kb/HT2731
Cheers,
GB

Need help with something VERY SIMPLE

I'm brand new to Motion - as if today - but I'm only trying to do some VERY simple motions with photos - a simultaneous zoom in and reposition. What I've been doing is setting the starting key frame at one position (adjusting the x, y) and setting the scale. Then I create a second key frame and adjust the postion and scale. It will do the zoom, but then it re adjusts the starting position. If I readjust the starting key frame, it automatically readjusts the second key frame. I don't get it! Applying the various 'behaviors' doesn't seen to help. Certainly there's something obvious here that I'm missing - as I was able to do this in FCP. For some reason the key frames are not fixed when it comes to position.

hi,
a couple of thoughts?
did you actually set a keyframe for position at the first frame?
Also unless you are parked right on a keyframe or have the record button on, if you adjust a value, all the values for all keyframes adjust accordingly. I often mess something up because I wasnt parked on a keyframe.
hth
adam

Need Help With Something In ICloud Program

I am trying to figure out if there is anyway possible I can save all my photos into ICloud? I keep
looking on the Apple homepage and all it talks about is photo storage in ICloud. I can't even find
anything in my ICloud about photo storage. If anybody has any idea how to do this can you please help
me tonight.

Hey TrishaA2466,
Based on your description, it sounds like you may be talking about the new iCloud Photo Library beta feature. If you are looking for more information on this new feature, you may find the following pages and articles helpful:
Apple - iCloud - Photos
iCloud Photo Library beta FAQ - Apple Support
Cheers,
- Brenden

NEED HELP GETTING SOMETHING OUT OF MY DEAD IBOOK

ok so ive had my beautiful ibook g4 for about 5 years, and about a week ago i sent it to get fixed cause it was acting weird and it was because my hard drive is absolutely dead. but that isnt my question... I didnt get a chance to back up my stuff and i dont really care about anything in there except some pictures... and I was wondering if you guys could give me options on what to do
but i also have to tell you this:
my ibook wont turn on.
the little gray apple with the white background pops up and then 4 minutes later or so it just turns off immedietly.
so I really dont know what to do...
i did the hard drive test to see if it could react and nothing- and when i tried to reinstall mac os x, and put the option of keeping all the info i got the kernel attack.
please help me!
Cristo

Go to a certified Apple Tech or Apple Store and have them extract the information from the HD to another source. They'll pull the drive, put it in an external housing and extract from there.

Really need help installing. something keeps on going wrong

so i'm really horrible with computers, and i jsut got a macbook laptop.
im installing mac os x and it was going fine until i ahd to put in the second disc.
right around halfway through installing the second disc my computer tells me that i have an error and that i shoudl try again.
i've tried that 5 times and its still not working.
help?
oh and another thing, even if i take the disc out and restart my computer, the "please insert disc 2" pops up, and i can't force quit or anything.

Hi lostwithcomps,
first of all: WELCOME TO THE DISCUSSIONS!
Insert the install DVD 1 and restart while holding down the c-key. Once the installer has started, select your language and then select "Disk Utility" from the MENU. Click your hard disk in the left sidebar and erase it.
Now quit disk utility and proceed with a normal install. Under "Options" select what applications you want to install and what printer drivers, fonts etc. should be installed.
After you successfully installed and rebooted, Repair permissions! Then download and apply the Mac OS X 10.4.8 Combo Update (Intel) . After the restart, repair permissions again.
Finally select "Software update" from the Apple-menu and apply all remaining updates.
Good luck!
If this answered your question please consider granting some stars: Why reward points?
P.S. You should consider installing the system only and install the applications later. You can deselect the applications in Options.

Need help Aligning something...just can't get it.

I can't seem to align the pricetotalstr in the simple prog I made below. If you can figure out what I need to do to align the pricetotalstr with the Amount column. It would be appreciated.

Forgot to post the prog:
//Collin
//This program
class JN9_4
          public static void main (String[] args)
               //variables
               int pots = 0;
               int largeboxes;
               int bigboxes;
               int smallboxes;
               double pricelarge;
               double pricebig;
               double pricesmall;
               double totallarge;
               double totalbig;
               double totalsmall;
               double pricetotal;
               String pricetotalstr;
               //literals
               final double Pricelarge = 7.25;
               final double Pricebig = 3.50;
               final double Pricesmall = 1.00;
               //input
               pots = IO.getInt("How many pots are going to be shipped?");
               //process
               largeboxes = pots/9;
               bigboxes = (pots%9)/4;
               smallboxes = (pots%9)%4;
               totallarge = largeboxes*Pricelarge;
               totalbig = bigboxes*Pricebig;
               totalsmall = smallboxes*Pricesmall;
               pricetotal = totallarge+totalbig+totalsmall;
               //output
               pricetotalstr = IO.format('r', 8, pricetotal, 2);
               IO.showMsg("Num \t Size \t Price \t\t Amount" +"\n"+
                         largeboxes+"\t 9 \t $"+Pricelarge+"\t\t $"+totallarge+"\n"+
                         bigboxes+"\t 4\t $"+Pricebig+"\t\t $"+totalbig+"\n"+
                         smallboxes+"\t 1\t $"+Pricesmall+"\t\t $"+totalsmall+"\n"+
                         "\t\t\t\t $"+pricetotalstr);
               //done
               System.exit(0);
}

Need help! Something went wrong in iTunes install

During my install of iTunes 7, my laptop overheated and shut down. Now when I try to install itunes it tells me that quicktime.msi is missing and the old copy of quicktime can not be replaced. It won't allow me to uninstall the old version of quicktime and I can't even open iTunes without the new Quicktime. Does anyone have any ideas how to fix this issue?

Now when I try to install itunes it tells me that quicktime.msi is missing and the old copy of quicktime can not be replaced. It won't allow me to uninstall the old version of quicktime and I can't even open iTunes without the new Quicktime.
let's try this first.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
once we've got all the existing QuickTime scraped away, let's try a careful standalone QT 7.1.3 reinstall.
download and save a copy of the QT 7.1.3 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.1.3 Installers … get the one that doesn’t mention itunes
if that install goes through okay, does an itunes install go through okay afterwards?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Need help on something...

Similar Messages

Maybe you are looking for