Need Help On Sound Blaster Audigy Va

hi!
i wanted to buy sound blaster audigy value but in its system requirements it says that the PCI has to be 2. compliant or higher i have P3 D85eea2 baord does my boards PCI are 2. compiant.
Please reply back soon cause i need to buy that card soon.

najam wrote:
hi!
i wanted to buy sound blaster audigy value but in its system requirements it says that the PCI has to be 2. compliant or higher i have P3 D85eea2 baord does my boards PCI are 2. compiant.
Please reply back soon cause i need to buy that card soon.
You can find all this information written in motherboard's manual (if you don't have one then normally you can DL the manual from motherboard manufacturers support pages).
Also, you'll propably can find this information by googling quite easy too (search after reviews of your motherboard model/pc model (if PC is factory build model)).
jutapa

Similar Messages

  • Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

    pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
    how cn i solve this problem..
    pls help..thnx
    my spec:
    AMD Sempron 2400+
    Epox 8rda3i
    Seagate 80gb
    Palit GeForce 6600gt
    Creative Sound Blaster Audigy Value 24-bit

    screwguy_28 wrote:
    is this the one?
    IRQ 0 System timer OK
    IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
    IRQ 3 Communications Port (COM2) OK
    IRQ 4 Communications Port (COM) OK
    IRQ 5 Uni'versal Serial Bus (USB) Controller OK
    IRQ 6 Standard floppy disk controller OK
    IRQ 8 System CMOS/real time clock OK
    IRQ 9 Microsoft ACPI-Compliant System OK
    IRQ 9 SCSI/RAID Host Controller OK
    IRQ 0 MPU-40 Compatible MIDI Device OK
    IRQ NVIDIA nForce PCI System Management OK
    IRQ 2 PS/2 Compatible Mouse OK
    IRQ 3 Numeric data processor OK
    IRQ 4 Primary IDE Channel OK
    IRQ 6 Sound Blaster Audigy OK
    IRQ 8 SoftV92 Data Fax Modem OK
    IRQ 9 NVIDIA GeForce 6600 GT OK
    IRQ 2 Standard OpenHCD USB Host Controller OK
    IRQ 22 Standard OpenHCD USB Host Controller OK
    Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
    Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
    jutapa

  • Help! Sound Blaster Audigy - bass and tre

    Hello! I had a Sound Blaster Audigy. There are any problems in the control with the Creative Surround Mixer. It cannot to set the bass and treble. Why and what is problem with it's Thank you!?Problem with the Sound Blaster Audigy - bass and treblehttp://icq299885550.mysinamail.com/Photo/Creative.jpghttp://icq299885550.mysinamail.com/Photo/Creative2.jpg?Message Edited by mrchan2002 on -7-20062:27 AM

    What's the model number of your soundcard? Certain series of Sound Blaster doesn't support adjusting bass and treble so you have to use the Graphic Equalizer software instead to adjust it.
    Jason

  • NEED HELP with Sound Blaster 5.1 digital LIVE! IM FED UP WITH THIS PEICE OF JUNK SOUND C

    yes i installed the Sound Blaster 5. digital LIVE! into my system and i got a new updated installation cd from creative and everything .. now heres the problem everytime i try to do an upgrade or download stuff from creative i always get an error message sayin MY SOUND CARD IS NOT INSTALLED .. but everything on my computer says it is installed and working properly .. so what the hell is going on ??? im a first time buyer of creative products and i purchased this from word of mouth on how good it was and i tell you what this sound card is a peice of **bleep** ... i have never in my life had such a problem installing something .. well i cant even use diagnostics cause i get the same message " MY SOUND CARD IS NOT INSTALLED ... i have tried uninstalling everything and so for and still nuthing .. i get sound through it but i cannot access any of the features from the cd or upgrade any of the drivers or anything .. SOOOOOOOOOOOOOOOO WHAT AM I SUSPOSED TO DO ?? IM ALSO GOING AS FAR AS SENDING THIS BACK TO CREATIVE FOR A REPLACEMENT CAUSE THIS CARD HAS TO BE DEFECTIVE .........ANYONE WITH SOME ANSWERS PLEASE LET ME KNOW ?

    ok i found my directx program and opened it and did sound test and other tests and it says theres no problems found .
    so this leads me back to my problem i stll get the error message saying that MY SOUND CARD CANNOT BE DETECTED ON MY SYSTEM . PLEASE MAKE SURE YOU SOUND CARD IS PROPERLY INSTALLED ...
    i went to creative to do the autoupdate install so it would auto check my system and i get a error message saying theres components that are corrupted and it closes and does nuthing ..
    and everytime i try to do an update i get the no sound card error message so im back to square ,
    i have done everything i can possibly think of and also everything the techs told me to do nd this **bleep** still dont work and i still cant use any of the features that came on the disc (i.e.) diagnostics and others etc.etc.etc.
    my only conclusion is i have a deffecti've sound card ..........unless someone can think of a miracle fix i dont see anything else it could be
    Message Edited by theviper on -06-2005 :00 AM

  • I need help with Sound Blaster Live 5.1 Digital

    ...because I cannot install it. I formated my Windows XP and since then my Audio Card isn't working because my PC hasn't auto-installed it like everything other. The bad news are that I have lost my installing cd and I don't know what to do... Please...heeeelp!!!

    Have you try using the Li'veDrvUni driver?
    Jason

  • Need help for sound blaster live 24 bit upd

    i downloaded the update for the soundblaster li've 24 bit but when i click on the update nothing happen no options on the screen it only show that is extracting the file what can i do about it

    did you tried cmss ON and stereo surrond on ?

  • Need help fast just bought sound blaster audigy se c

    Hi please anyone help me i just install my new sound blaster audigy se i also disable my onboard sound the problem is i dont get proper 5. surround sound from my speakers it just seem that all the speakers play but dont get the crossover ,I have a cheap 5. system which i bought together with my sound card the bran is duraband model ht-397 80 watts i bouth these two products from wal-mart and i set it up in my bedroom.Also when I go to the speaker checks to hear if each speaker is working it seem i would hear the two rear speaker test sound would come from the two front speakers? i dont like this because before i hand two simple speakers and would hear the change over.. pease anyone? if you can help please reply asp...

    Hi,
    May I know what OS are you running? Please make sure that all background applications are temporarily disabled when installing the sound card.

  • Integrated Sound Blaster Audigy ADVANCED HD Help

    Hey guys, I was hoping maybe someone could help me... I have the Integrated Sound Blaster Audigy ADVANCED HD driver but its only for 32-bit operating systems. I am running windows 7 64 bit and I was wondering if there are any 64 bit drivers around since I couldn't find any on google. If not, are they planning to release one anytime soon? Thanks for the help.

    You know I did that and it worked. Thanks you.
    I should mention that when I contiued the activation it failed to load giving an error saying no audio driver. So, I went to the Dell website and downloaded the sigmatel audio file, re-installed and it worked. However the saga continues as it only sees 2. speakers when I have a 5 speaker system and i can't figure out how to change that settings. I followed the help instruction but under the confiuration I am not given any option. so still some work to be done. I would have expected the process to be simpler, you really would need to be quite skilled to be doing all this tweaking, if you were a novice you'd be lost!

  • Help! Creative Sound Blaster Audigy SE 7.1 Sound Card -

    Hello. I've just recieved my new soundcard. It is the Creative Sound Blaster Audigy SE 7. Sound Card - OEM. (Located here: http://www.overclockers.co.uk/showp...atid=&subcat=)
    My motherboard is a Asus A8N SLi se.
    Now, I have put it in my motherboard, and just tried to install the drivers. I got an error though. It said "No compatible creative product detected." So I downloaded the drivers off the Creative site, and that did not help either. I disabled the onboard sound in the BIOS, and yet it still did not work. I tried plugging in the soundcard into each of the soundcard ports on my motherboard, and none of them detected the card.
    I am sick of using onboard, and would like to get this problem fixed.
    Some additional information:
    The back audio/microphone ports on my motherboard never worked. I have been using the front sockets on my case. I see cables running from my motherboard to the front of my case. Maybe one of those cables need to go into my soundcard in order for it to work? I'm not sure which though, so I didn't try it, just incase.
    Here are some screenshots of what I'm getting. They might help.
    Drivers from the Creative site: http://img409.imageshack.us/img409/4528/gayap9.jpg
    Drivers from the Creative CD: http://img520.imageshack.us/img520/3649/gaycdam5.jpg
    Unknown Device in my Device Manager: http://img409.imageshack.us/img409/9924/unknownoj8.jpg
    Now, I have no other creative parts in my computer. So this should be the soundcard, right?
    Thanks in advanced for any replies.

    Does the cable from the MB to the front I/O panel simuliar to this one? I installed a Audigy2 ZS in my other system and connected the black cable with the 0 pin connector to the card to use my front phone/mike jacks. Also in your device manager I see the Realtek AC97 still listed. When I installed the XM card in my 600 I disabled it in the BIOS so the entry does not show up in mine just the SB XF-I is displayed.
    src="http://i.pbase.com/g6/89/377389/2/79327975.pMK94KJy.jpg" alt="IMG_008.JPG">
    Dell XPS 600 Intel Pent D 830 3.0ghz
    Chipset- Nvidia nForce4 SLI Intel Edition
    WD 60gb HD
    2gb Ram
    DVD-ROM
    DVD-RW (Plextor 760A)
    Creative XF-I Extreme Music
    Logitech X-540 speakers
    EVGA 7950GT
    Dell 2007WFP (I-SPS panel)
    Win XP SP2
    BIOS A

  • Creative Sound Blaster Audigy SE SBO570 Can't play 5.1 HELP

    Hey
    - Using Windows 7 & 32 bit
    I Have Creative Sound Blaster Audigy SE?SBO570, and i use Creative Audio Control Panel.
    I have set it to 5. in Creative Audio Control Panel but it play only like 2.
    before i installed my new windows 7 it worked fine.. and i used "Creative Volume Panel for 5." and testing speakers there.. but now i can't.. i think i need software for windows 7. I have it newest Driver for windows 7.
    i been looked everywhere for some software but i get error everytime :S
    PLEASE HELP ME! :S
    Sorry for my bad english.

    btw everytime i trying install it from CD i getting Crash Dump in blue screen and restarting.. and then i starting again i getting error:
    The audio device supported by this application is not detected. The application will exit

  • Help with an Older Sound Blaster Audigy Card! Computer freezing on driver upda

    Hey everyone,
    I'm new to these forums and dont know if anyone still has experience with the older cards.
    I've had a Sound Blaster Audigy 2 Platinum for about 6 years now and noticed some popping and sometimes the card began to emit a high pitched whining sound. Thus I decided to install the newest drivers (can't hurt can it's)
    However, when I finished installing the drivers, my system refuses to start. Sometimes it's at the Windows login screen, sometimes right after.
    I finally got something that may be the reason why my system is hanging. I have a message that pops up that says:
    Box Name: ReadReg Application :Version 6.0..36
    Message: Completing installation of your audio card
    ??? Please wait.
    My computer is now frozen.
    Here are my system specs if it helps
    P4 2.66Ghz
    ASUS P4S800D-X
    PNY 6800GT
    SB Audigy 2 Platinum
    GB Corsair XMS3200C2PT (2x52MB)
    Windows XP Pro
    DVD+/-RW DL
    DVD ROM
    After I did a system restore, the sound driver was missing. Said Creative Audigy in the driver section with the yellow exclamation mark. I installed the new drivers again with the same problem.
    Any help is welcome!? Thank you for your time and consideration.
    Message Edited by Bane99 on 2-02-2008 07:00 PMMessage Edited by Bane99 on 2-02-2008 07:0 PM

    I would:
    Pull the sound card.
    Start up.Enter the BIOS setup utility to make sure your MB recognizes the change.
    Save the BIOS
    Start again.
    If Windows works.
    Run a thorough virus scan (I hope you're running some reputable anti-virus software!!!)
    Install Service Pack 3.
    Re-install the sound card..
    I'll bet Windows finds a driver for it that works. If not, run Windows update manual and see if there's a driver update for the card.
    If none of the above helps, well... I confess, I reinstall Windows at the drop of a hat and that usually solves all problems. Do it on a Sunday so you can watch football while Windows churns.
    Power Quest Dri've image has saved me from the Windows install horror on many occasions. I think Symantec has pulled the program but there must be something similar out there. Buy it. And in the future, remember, if it ain't broke, don't fix it!
    Good luck.

  • SOUND BLASTER AUDIGY SE AND VISTA DRIVERS WITH FULL FUNCTIONALITY- WOOOOO

    (ONLY DRAWBACK IS THAT YOULL HAVE TO FIND ANOTHER MEDIA PLAYER BESIDES WINDOWS MEDIA PLAYER FOR YOUR SAVED AUDIO FILES: I WENT WITH WINAMP)
    CONTINUE ON-
    Download RAR file with ISO inside and install if you don't have the installation CD
    installation cd with EQ download: http://files.filefront.com//;689430;;/
    If you do or after you finish downloading goto step A.
    A) Take your Creative Driver/Install CD, copy it to your hard dri've.
    B) Goto Setup.exe right click, goto properties, goto the Compatibility tab.
    C) Set it for Windows XP SP2.
    D) Run install the Creative Audigy and if you need MediaSource *WMP Will pop and hiss while multitasking I reccomend MediaSource as it does not although the "Sources" is glitchy.
    E) Restart when told to
    F) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    F) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!
    G) Part ) Right click on the speaker icon by the clock, click Audio Devices... Right Click on Playback Control, goto properties click Configuration Set it to Stereo hit apply.
    G) Part 2) Goto Speaker Settings, Set the configuration to 5./7. depending on what you need, then make sure Sync with Control Panel is UNCHECKED I found that is the critical element! Enjoy your multichannel!Message Edited by jeepbme on 03-08-200708:49 PM
    Message Edited by jeepbme on 03-08-200708:50 PM

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • Can not detect Sound Blaster Audigy 2 on this sys

    Im having trouble install drivers (apart from the old CD ones and some out of date ones) all the latest drivers or beta drivers say they cannot detect my card. I have an Sound Blaster Audigy 2 OEM which i bought nearly 2 years ago. I've tried swapping it to a different pci slot but makes no different Constant crashes when playing openal games. Even if i install the lates openal file. But i need to find out why i can't install the newest drivers and why they say i haven't got an audigy 2 when i have. In my device manger even says that its an "Creative SB Audigy 2 (WDM)" My system is as follows...
    Windows XP Proffesional SP2 32Bit
    P4 3.0ghz
    .25Gb DDR 400 Ram
    Geforce 6800 Ultra 256Mb
    Asustek P4P800-E Deluxe Motherboard
    Creative Sound Blaster Audigy 2 OEM
    PCTV Rave TV card
    Please some one help me, it will be greatly appreciated. If you need anymore info please let me know ( i may uninstall and remove the tv card just to get it off my list of perhaps the audio part of the tv card could be interfering ?)Message Edited by Alexia on -2-2005 :52 PM

    I am getting the exact same problem. Just downloaded the "Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002" for my soundcard which is an Audigy 2 OEM (Model No. SB0240).
    I am using WIndows Media Center Edition 2005, but when I try to install the beta drivers, I get the following error message:
    "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this setup program
    Setup will exit."
    My Device Manager shows Creative SB Audigy 2 (WDM) with driver version as follows:
    Driver Provider: Creative
    Driver Date: 23/06/2004
    Driver Version: 5.2..444
    I am currently hearing sound fine (so the soundcard is installed correctly), but the sound keeps cutting out from games that use OpenAL.
    Anyone else getting this problem? How did you fix it's

  • Windows XP Sound Blaster Audigy FX Support

    How do I get my Sound Blaster Audigy FX to work with Windows XP. First it doesn't find the device. Then the cd that came with it says it needs Windows Vista to work. Please Help!

    joyalton wrote:
    I have a new Emachine T3508 512MB with Windows XP (I plan to add a second 512MB). I also plan to purchase/upgrade with the Sound Blaster Audigy SE sound card. Is the Creative Inspire T3030 2.1 Speaker System compatible with my T3508 & the Sound Blaster? I think it should be but I wanted to hear it from someone who knows more than I do. Thanks guys.
    To be honest, this is a pointless post. You're going to have to check your machine to see if there's an additional PCI slot that can take on the audigy SE. If so, then you already know your inspire t3030 can be used. Even the onboard sound with your motherboard should be able to take it on (assuming your emachines PC has onboard sound). I hate buying emachines, HP, and Compaq PCs they lack expandability.

  • Set up from creative down load does not detect any sound blaster audigy mess

    I have a sound blaster audigy with no installation cd. I installed the card to download the drivers. The detection software on the site said there was no creative product installed.
    I downloaded the web update file and saved to my desk top. Ran the file after closinging all apps and got a message that there was no audigy detected. Reinstalled the card, same, did it again in another pci slot.
    Tried finding a driver in xp, found one for soundblaster. No sound at all with this xp driver. I do not have intergrated sound on the abit k7rsa board. How do you install the driver if the set up program stops you because it does not see the device, and with no install cd? Thanks for any help.
    Tony

    I have the same problem. About a year ago I threw out all my driver cd's because they were really piling up and i figured i'd never need them because I've been able to download all the driver's i've ever needed from company websites.
    NOT SO with Creative.
    I have the Sound Blaster Audigy 2 Platinum (the one with the ports for the front of the computer). I recently had to reinstall my OS. I got the soundcard to work, but all the optional components I had before (like the ability to use the remote control to control sound, and the EAX console etc) are gone. I tried to download these components from the website (it's really hard to tell which is which, so i downloaded them all). They will NOT install! I keep getting the error message "Setup did not detect required components, Setup will exit" on all the download software.
    This is extremely frustrating because I'm unable to setup the speakers properly (windows speaker settings don't really work).
    I did manage to do the automatic update thing, but it only updates the core drivers.
    PLEASE HELP!
    I paid $200 bucks for this card (granted, that was a couple years ago), so I should be able to at least download the same software that came with the product!
    Please have a professional (not an engineer without user interface experience) design the download area too...it is extremely difficult to understand what the individual components really do! At the very least, when you download them...they should work!
    Thanks.

Maybe you are looking for