Need help on the correct directory extract structure for SP15 .SAR files

Hi all,
With the help of many here I have been able to finally download all the SP15 files I need for my EP 6.0 on WAS 6.40. I am currently on SP11 for both EP and WAS and want to move up to SP15.
I downloaded all the .SAR files and did SAPCAR -xvf all from within a temp directory I created. Yes, some of the LABEL.ASC files were being overwritten.
After all the extracts, I ran SAPINST and it did start, but unlike when I ran SP11, I had options for KM, EP, Tools, etc. This time it only presented me with options for the WAS and the first option was "Import Support Package 15" (with the other options being for dialog instances). There was nothing about EP, Tools, KM, etc.
I ran the Import option and it completed successfully. I then thought it either did everything or if I reran it the other options (for EP, KM, etc.) would now show up. Of course, I was wrong.
So where am I exactly going wrong regarding extracting all the .SAR files into the proper directory structure so that SAPINST runs correctly?
Please help if you can.
Many thanks,
Mike

Hello Mike,
I think you extracted the files for the J2ee engine. Generally you will have a different SAPINST for Portal. Please refer the stack guide for SPS15 Page 22 for the files you need and the procedure to apply it.
satck guide can be found at http://service.sap.com/instguidesnw04 --> under maintenance
regards
Mahesh

Similar Messages

Need help picking the correct hard drive upgrade for my MBP

I need help picking the correct/best hard drive upgrade for my MBP. It is the 15" 2GHz Core Duo. Came with a spacious 90GB drive.
Suggestions and recommendations very appreciated.

It will take almost any 2.5 inch sata drive.
Take a look at www.newegg.com and www.macsales.com to see what's out there and how much it costs.
Toshiba have a 320gb 2,.5 inch drive in the works, but it's not quite out yet and will be expensive.
I'll start you off..
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives

I need help choosing the correct Photo Shop product for my needs.

I sell items on Ebay, my photos are often blurry, have shadows or do not show fine details. How do I know which photo shop product is best for my needs?

I agree with Silkrooster's answer, however I will also say that starting by taking a "good" photo will help you a ton, even before you bring it into a photo editor. It may just be that you need to create a makeshift lighting setup (to avoid problematic shadows), or try taking your photos with a tripod (to avoid blurring).
Here is a link with some really great tips to help you with product photography.
I would also recommend that you check out Adobe Lightroom, which is a program created specifically for photographers. Below is a video showing how a photo can be vastly improved in 5 minutes! I hope you find this helpful.

Need help finding the correct replacement monitor for a T400 laptop

I have a T400 that came with a monitor with these specs: 14.1 WXGA TFT, w/LED backlight. The monitor was damaged and must be replaced.
The closest replacement monitor I can find online has these specs:
LENOVO THINKPAD T400 LP141WX3(TL)(R1) LAPTOP LCD SCREEN 14.1" WXGA CCFL SINGLE (SUBSTITUTE REPLACEM...
by Lenovo
Will the CCFL monitor work sufficiently in place of the LED backlight monitor?
I appreciate any guidance provided by more technically knowledgeable Lenovo users. Thank you!

CCFL LCD would require you to get a LED subcard, new display cable, in addition tot he monitor.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Need help in enhancing CRM datasource /extract structure

Hello Experts,
I have come across an issue with a CRM DR phase 1 report "Program Status Management report".
The user wants to display Mobile number and Pager number of a contact person for the customer.
Contact person is a Business Partner (Mobile no, Pager no are attributes for Business partner), and the extractor which extracts communication information about a business partner is BUPA_DEF_ADDRESS_BW (from data source 0BP_DEF_ADDRESS_ATTR.)
This extractor only gets First Telephone number and Fax number from the table. The same CRM table also has the info about Mobile number and Pager number. But BUPA_DEF_ADDRESS_BW is a standard extractor.
From the searched forums, mobile number is stored in the field TEL_NUMBER from table ADR2 in which we need to filter the R3_USER = 3. We need to know how we can append/include this mobile phone/pager number fields in the extract structure since this is a standard extractor and might need to edit a BADI/FM. Please advise. Thanks!

there is no different as generic DataSource.
1. TC: RSA6, find your DataSource and click on " extend extractStructure" at the navigation bar.
2. TC: SE38 to write UserExit to populate the data for append fields.
UserExit: ZXRSAU01 if your DataSource is for Transaction Data
ZXRSAU02 if your DS is for Master Data
hope this help

Need Help Entering the Correct Data on Site Setup Window

[DW CS5 on a Mac OS 10.7.5]
I get an "FTP Error Message" after entering data on the Site Setup window after pressing Test.
I want to upload to my host/server's cPanel one of a number of subdirectories that I have on my root directory. My first attempt at uploading the first subdirectory failed. Can someone help me determine which of my Site Setup entries is incorrect and what the correct entry ought to be?
Perhaps I'm entering incorrect data in the "Root Directory" or Web URL" fields. My host server has given me the correct data, which I've carefully entered. Unfortunately, my testing on the Site Setup window continues to get this message: "An FTP error occurred â cannot open server folder /public_html/alaska/. Access denied. The file may not exist, or there could be a permission problem." Support staff at my host/server cannot determine why the uplaod attempts fail.
I'll appreciate your guidance. Thanks, very much.

Brett, thanks for your prompt e-reply.
Unfortunately, removing the entry from DW's Root Directory field enabled a successful test, however, it caused all uploaded files to wind up in my very large root directory. ( :-( I had to do a lot of file management and deletions to clean up the root directory.
My numerous approaches, after receiving your suggestion, appear to have found a successful workaround. Here's what worked:
-- While in cPanel's File Management window, I selected the "/public_html" folder in the left column and clicked "New Folder" from the top toolbar. Once the new subdirectory folder was created, I went directly to the DW app where I then clicked the icon (atop and to the far right of the Files panel) subtitled "Expand to show local and remote sites".
-- With DW's expanded window open, I selected the new folder name in the left half of the window. I then dragged and dropped all the files that were in the right-column's subdirectory's folder to the new folder in the left column.
-- After completing the drag and drop effort, I checked cPanel's File Management window and verified that all files went to the appropriate subdirectory folder.
-- Finally, I opened the site's pages online to see that all worked as intended.
Over all, I wish DW were more reliable, such that when testing setups for *subdirectories* that have "/public_html" in the "Root Directory" field, they will *all* test successfully.
Sadly, Adobe no longer supports CS5. ( :-(
Nevertheless, thanks for your assistance, Brett.

X300 - Need help finding the correct internal DVD Burner

I want to buy and install an internal DVD burner, which I am unable to identify on the Lenovo website. The only internal Ultrathin DVD burners I find fit the x200 series, but nothing for the x300 series. Frustrating.
Mine is a Thinkpad x300, Type 6477, and S/N L3-xxxxx.
Anyone able to help me identify the correct part number?
Thanks!
Moderator Note; s/n edited for members own protection

. . . thanks for the part IDs, lead_org. . . . took your advice and searched ebay for both, but nothing surfaced. . . . so, I entered the parts numbers into Lenovo's Websales site and was unable to find any such part listings for sale anywhere . . . nothing. . . . then, I emailed Lenovo Websales about it . . . they promptly replied that the parts were not in stock, and that I could try purchasing from www.cdw.com . . . I can understand if Lenovo did not have them in stock, but that they would not even LIST the parts was weird. . . . this is a 1-1/2 year old machine . . . are the lifecycles for laptops these days so short that they are unsupported even this fast? . . . I did see a few other sites selling the replacement DVD as new (presumably) for US$300, but none were in stock. . . . if I have no other alternatives, is a DVD the sort of part that is durable enough to reliably purchase used? Thanks!

Wrong Songs on iTunes need help getting the correct ones.

I just purchased the album "The Ever Popular Tortured Artist Effect" by Todd Rundgren and two of the songs are different from the title of that iTunes has in the store. They are "Drive" which is playing as "Bang the Drum All Day" and "Hidawy" which is actually "Compasion" that is from a different album from the same artist. If you preview it on the iTunes store it is this way also. How can I get this corrected and either get a credit or the correct song?

The mac version of Premiere will not export as .wmv so I chose the only setting that would allow me said custom resolution and I intended to just convert the file once it was set.
The original source was .jpeg's and a .m4v video

I need help finding the best Creative MP3 player for

I've been searching through the product literature and not finding the information I need to make my decision. I'm hoping the people here might be able to help.
I need one that does MOST if not all of the following:
) Audible audio book support.
This is mandatory since 75% of my usage is books on the commute. If the player will have support "soon" as in the next month, then that is OK. I can limp along with my current player.
2) Bookmarks.
Since I mostly listen to books I need to be able to resume play at any point. It would be great if the player supported a bookmark per file, but I could handle one that only remembered the current position.
3) In-Car use.
By this I mean that it can receive power from a car adapter and will auto shut off and remember the playing position when the power is turned off. I was thinking of using a USB power adapter for the MuVo Tx FM, but I don't know if it will actually play when powered that way. I dri've 2hrs a day and that eats batteries too fast to not use the car power.
Thanks for the help =)

Altair,
The Zen Xtra is the player you want. It currently has all three of the features you want available.
) It supports Audible with the latest firmware.
2) It has a bookmark feature that lets you set multiple bookmarks and recall the position.
3) It has a car mode that makes it shutdown when you turn off your car (assuming that your car outlet turns off when the keys are removed) and restart at where it was when you turn the car back on.
Jeremy

Need help in the installation of BPC7.5 for NW

Hey folks,
I am new to BPC 7.5 for NW. I have installed the version on my local machine.
Do I need to install the same on my server? The configuration, I have below BPC7.5 is BW7.02.
Do I need to install the BPC on BW server or how will it be?
Thanks,
Nobel

Raghu,
A couple of quick ones-
- I have BPC 7.5 for NW client installed on my laptop. Do I need to have an "seperate" Windows Server with the IIS, .NET, MSMQ, Visual Basic runtime, XceedZip, SAP GUI 7.10 etc installed on it?
- My BW server is on AIX, do I apply K-750AGINCPMBPC.SAR on it? Or do I need to have another server for it?
- What is ODBO Client?
- The BPC software which I downloaded, has a folder of server in it which has BPC Server 7.5.exe file. Where do I install this?
Thx!

I need help picking the correct power supply for my HP Pavilion a1000

Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
This question was solved.
View Solution.

jimmycaps wrote:
Hello,
I need to replace my power supply on my HP Pavilion a1000. It currently has the original (A Bestec Model: ATX-300-12Z CDR. The HP P/N is 5188-2625.
I found one on ebay that has the same numbers but instead of CDR, it says DDR. I don't really know what that means. The listing is below. Will this work? If not, could you give me a link that would work?
Thanks ahead of time for your help!!
http://www.ebay.com/itm/Not-Noisy-Replacement-PC-Power-Supply-fo-Bestec-ATX-300-12Z-DDR-HP-P-N-5188-...
Hi,
Yes the PSU will be ok. It's a desktop so you don't have to use exactly the same PSU. It can be even more powerful but make sure there are all compatible connectors. It looks like the CDR version is only 300W and the DDR 400W. The connectors are the same..
http://www.newpowersupply.com/bestec_atx_300_12z_cdr_300w_300w_24_pin_ps2_replacement_power_supply_p...
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Need help restoring the CORRECT dates and times to iphoto '09 photos

I have read a lot of stuff on here about restoring dates and times in iphoto only to no avail. All I want to know is: 1 - how did all the dates of my photos get changed in the first place? ; 2 - how can I restore them to their original dates?

Well, I noticed my dates were incorrect weeks ago. The only thing I did was upgrade from '08 to '09. I tried using "adjust date & time" but I would have to know all the dates by memory in order for that to work. My dates are all recent dates. Sorry for the ambiguity.
Forget what I said about the event labels. They are titles I made for each event; however, all of the dates are incorrect. Maybe my camera is to blame!
Message was edited by: Sold on Mac

Need help choosing the best laptop or desktop for video editing.

Hi guys. I'm a videographer and am in need of upgrading my current Dell Dimension 8300 desktop to either another desktop or a laptop. My current Dell is just too slow. It takes forever to render a video.
Anyhow, what do you guys recommend for video editing? I'd like something with plenty of hard drive space, plenty of memory, and a powerful video card. There are just too many to choose from and was hoping to get some feedback.
Thank you,
Brian

You can find a fairly cheap quad core desktop with a nice video card. So if you need something that will last a while and not cost too much I would go this route.
If you want a laptop, put yourself in one of these categories: someone who needs high mobility/battery life (14 in screen or smaller), someone who needs high mobility with a big screen (15.4in), or someone who needs a powerful computer with a big screen (17-18.4 in).
Don't worry too much about laptop brands, only a handful of them actually make their own laptops, most of the big brands use the same two or three laptop manufacturers.
Get the most powerful intel processor you can afford, and put either a 9 series nvidia, or an ati radeon 4800 series in, four gb of ram, and a 7200 rpm hard disk.
After that it really comes down to price and personal style, I would stay away from the hp laptops, the brand that they use doesn't do so well making the internal components.
Here are some good picks.
1) ASUS G Series G50VT-X3 (15.4in)
2) Sager 5793 (17in)
3)ASUS N80 Series N80Vn-X5 (14.1in)
Asus actually manufactures their own laptops, and my experience with them has been spectacular. The Sager is a rebranded Clevo, which is one of the brands alienware, falcon northwest, and other high end companies use.

Error "No extraction structure for event I3" running set up 2LIS_17_I3HDR

Hi, Experts:
I am trying to activate and run set up datasource for PM 2LIS_17_I3HDR, so that data can be extracted from R/3 into BW 3.5 system.
In R/3 environment, we have 2 clients. client 200 for configurations but has no data, and client 230 has data but can not change configurations.
I have done the following in client 200:
- Activated datasources for for PM 2LIS_17_I3HDR in RSA5.
- Made selection in RSA6.
- Activated extract structures and datasource for application 17 in LBWE and also ran job control. Now I can see the extract structures for application 17 are active in client 200 only, but inactive in client 230. I tried to turn then active in client 230 but got error "Client 230 has status not modifiable".
- I assume I should run set up tables in client 230 because it is the client with data in tables? But when run set up in OLIIBW, I got the error "
   No extraction structure for event I3: Messages active
   Message no. MCEX106
   Diagnosis
   You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I3 (messgaes).
   System Response
   Data for event I3 is not transferred to the BW interface.
   Procedure
   First activate the desired extractor structures for application '17' using the Customizing Cockpit and then start the setup again."
- I can not manually activate extract structures in client 230 because it is not modifiable. I tried moving transports, the path is not set up. I see extract structures for other applications like 11, 13 are active. So I guess there may be other ways to activate the extract structures in client 230.
- I also tried to run set up in client 200, which has extract structures for 17 in active status. But got the same error as client 230.
Would anyone please help me with what to do to fix this?
Thanks,
Jenny
Edited by: Jenny Chen on Oct 29, 2009 6:38 AM

Hi, thanks for the reply!
Just update for what we did to solve this. Both clients are for development. Client 200 is only for configuration but no data. Client 230 has data but not modifiable. Usually, when we create a structure, table, program, or active anything in 200. We will see it in 230 right away without transports. But this is not the case for activating extract structure for datasource from Business Content. We end up having Basis guy manually activate the structure for us directly in client 230 with transaction LBWE. That worked.
Thanks,
Jenny

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait

Need Help ASAP my State tax form is in a PDF file and the attachment in my email says Please wait...
I tried downloading updates like it said to but it still will not display the document. How do I print the PDF file ASAP

Can you give us a LOT more info?
What email client? What version of Reader (I can only assume you even have Reader at this point)?
Please wait? I'm sure it says more than that, right?
Have you tried simply saving the PDF (it IS a PDF correct?) to your desktop and opening it from there?
Did you get this form from the IRS or did it come from somewhere else? If the IRS again, what version of Reader?
Help us help you.

Need help on the correct directory extract structure for SP15 .SAR files

Similar Messages

Maybe you are looking for