Need help on to set User status for Operations in Maintenance order

Hi experts,
i am new to PM module.
i need to do BDC for IW31. i want to know some inforamtion
on user status for each opertaion.
my problem is ,, what is user status.
why it is saying order is not yet released when saving and status can not set.
in this cases how can i do BDC.

User status are something set in the configuration and specific to the company which SAP hasn't given in the system status.
May be in your system user status are configured to set only after the release of the order.
For doing the userstatus you may need to release the order, you can release the order thru bdc and then do bdc for user status. Also see below link
http://www.sap-img.com/plant/user-status-set-date-in-maintenance-order.htm

Similar Messages

Set User-status for PP order

Hi All,
How can I set the user-status for a PP order, also let me know which user exit suits this requirement, as I know I have to make use of a FM or a BAPI which sets the user-status in the user-exit somewhere.
Thanks
Mark

Hi,
Try the following enhancements/exits for setting the status for PP order.
STATTEXT
CCOWB001
COIB0001
Regards,
Anji

User status for Notification and Work order

We generate Service Notification IW26. I have already configured user status like PMND (Planning order not done), AWOP (Awaiting ordered parts) etc. in the Work order a while ago. Now the user wants same User status to the Notification as well. I like to know from experts what is the value added to have the same user status for both Notification and Work Order?
Do you have any suggestions?

Hey Chandra,
The customer intent behind this requirement must be to check in reporting / List Display Transaction about the Order Status. If they want to know looking at a Pending Notification List about the Order Status, you can always provide similar report using SAP Query Builder or with help of your Developer.
Apart from that If the Requirement is to have these User Statuses in Notification itself, Please advice them that it will be extra activity while performing transaction.
I dont see any other benefit of having User Statuses added to Notification as well.
Do let me know if you have some more info on Why Customer is requesting this....
Regards,
Avi

User statuses for equipment,functional location,order,notification

Kindly suggest me which user statuses should be assigned to equipment,func. location,notification & order.
Regards,
Vivek

Vivek,
There is no rule or std instruction which user status to be assinged to equipment,FL, Notification or order. In std you may get some user status for equipment. notification etc. It doesnt mean that you should use it. User status are define /created base on the business requirement . a user status can be assigned to multiple object type such as equipment, notification ,order etc.
You can refer the std user status profile when you create your own. In order to know the detail of it object type. You can select the status profile >> click on the detail>> click on the object types.
Hope it is helpful to you.
if you want further detail please revert.
DP

Colective Settlement and "CLSD"Status for Production and Maintenance Orders

Hi dear experts,
Is that possible to use transaction KO8G for collective settlement of Production Orders? Apparently it only works for Maintenance Orders.
The same applies for transaction CO99 for getting "Closed" status in Orders. Apparently it does not take the Production Orders, even if the selection "With CO Production Orders" is active. Is there any additional configuration we should do?!
We would like to do settlement (and mass set "Close" status after) for Production and Maintenance Orders at the same time.
Thanks in advance,
Lígia Moreira

Hi,
You can use CO88 for settlement of production orders. Normally, CO99 should take production orders if the flag is switched. Do you receive any error when you do it?
Regards,
Eli

Make Deletion Status for Operation in Prodcution Order

Hello Experts,
Is there any Function Module or BAPI to make status for Operation as deletion in production order. i.e I0013 is the status for the operation.
Thanks In Adavnce
Dhiraj Dangore.

Hello,
Thanks for reply..
Let me explain the process we are following
I have two operations in an order.
Operation 1) Control Key M111(Internally Processed) - One component attached for this operation ( its a not stock item)
PR, PO and GR has been done and no issues in that.
Operation 2) Control key M222( Externally Processed) -
a) One Service attached with this operation which i want to delete from the order.
b) One Component also attached ( non stock item) and PR , PO, GR has been done for same.
For point a : Service is present in PR but not released therefore no PO , GR is done.
Now when i try to delete this serive from the operation then system does not allow me to do so. Also i want to delete from PR too and again i was not able to delete from it.
Please let me know how this can be possible.
Rgds
Himanshu

BAPI to set user status for PS

Hi,
I need to set the status as approved "E0002" from BAPI ( from workflow) for Project definition (BUS2001)
I got BAPI " BAPI_BUS2001_SET_STATUS" and gave import parameter for project definition but i couldnt able to give value for set_user_status as it takes only 4 char but my status(JEST) is 5 char (E0002).
Please help me how to use this bapi and what are all other bapi's i need to call to work correct.
Ashu

Use this FM I_CHANGE_STATUS for changing status.
CALL FUNCTION 'I_CHANGE_STATUS'
EXPORTING
OBJNR = v_objnr
ESTAT_INACTIVE = 'I0001'
ESTAT_ACTIVE = 'I0002'

User exit to set user status for quote

Hi,
I need to update the user status in the header of quotation (using VA22) based on some conditions. I checked the user exit's under 'MV45AFZZ' but no use.
Could any one please provide me where I can write the code to put the conditions before upating user status in header
Thanks
Thang Tran

Hi,
Is there anyone can give me some suggestions?
Thanks in advanced
Regards,
Thang

Set Deletion Flag for the Preventive Maintenance Order

Hi,
I need to set the Deletion flag for the Service Order. Deletion flag available in the screen disabled. Please suggest.
also I need know under which I shall be able to set such deletions.
Thank you,
Vijaya

Hi Vijaya,
Pls refer the help.sap.com related to deletion flag for PM/CS Orders. Some of the check criteria mentioned below for your reference.
Before a deletion flag is set, the following requirements must be met:
u2022 Any manually added purchase requisitions or purchase orders for the order must be deleted first.
The balance of the actual costs for the order must be zero. This means that the deletion flag can only be activated if the order has already been settled, or if no actual costs were incurred for the order.
u2022 Commitments relating to the order must be deleted.
u2022 Unprocessed and incorrect goods movements must be processed.
When the deletion flag is activated, all remaining capacity requirements are deleted. A deletion indicator is also set in any open material reservations.
An order that has been flagged for deletion cannot be changed. However, you can cancel the deletion flag.
Thanks
Siva
Edited by: sivakumar kasi on Sep 3, 2009 12:09 PM
Pls set the Order as Techically completed (TECO) and check the deletion flag set.
Thanks
Siva

Set a User Status for Quality Notifications only if they are "Activated".

Hello experts:
I need to be able to set a User Status for Quality Notifications only if they are "Activated".
When defects are recorded for an inspection lot, a "Defect Notification" is created which can be activated to become a "Quality Notification". Initially, the only difference between the inactive "Defect Notification" and the active "Quality Notification" is that the system status DEFR is active for the "Defect Notification", but is cleared when the notification is activated.
So, I'm looking for the business process associated with the Activation to use as a trigger for my own user status.
I checked the business rules for status DEFR and found that the following processes clear this status
PMM1 - Postpone Notification
PMM2 - Put Notification In Process
PMM3 - Assign Order
PMM6 - Put Notification In Process Again
Any Ideas ?

Perhaps some additional information would help you understand what I need to do.
For notification type F3, we are recording all defects found in production.
Most of these are expected defects that result in a minor reduction in yield.
For this type of defect, we do not activate the notification, and the inspection lot is closed automatically at the end of production.
However, sometimes defects are observed of an unexpected type or a higher than expected quantity.
When this happens we manually activate the notification and assign tasks to find and correct the cause.
It is only for these activated notifications that I want to automatically set a user status, which among other things, will prevent the notification from being closed until some other actions are complete and a different user status is selected.
The function of the user status currently works exactly as I want, but if it is set as the initial status for all F3 notifications, it is also preventing the un-activated defect notifications from automatically closing. I therefore want to use the Activation event as the trigger to set my user status.

I want to pass my iMAC along to my kids. System is 10.4.11 or 10.5.11. Have original Lion and Tiger OS discs. What do I need to do to set it up for a new user?

I want to pass my iMAC along to my kids. System is 10.4.11. Have original Lion and Tiger OS discs. What do I need to do to set it up for a new user?

I'm having to guess at which iMac you have. This forum covers three older variants of the iMac family that were made from 1998-2005 with three different processor types.
If yours has a G-series processor, it can run neither Lion 10.7 nor Snow Leopard 10.6. If the processor is a G5 or a G4 (must be faster than 867mHz( you can install Leopard 10.5. If your plan is to reinstall the OS before turing over the computer, let us know which iMac you have (doing "About this Mac" from the Apple menu will give the processor type--that will do for this purpose)
If "About this Mac" says you have an Intel processor, you have a much newer iMac. Let us know and I can ask the Hosts to move it to that separate forum.
If you wish to maintain control over the computer, you can go to System Preferences > Accounts and set up a new standard account. The user logged into that acct can pretty much use anything installing in that account but cannot install new software or modify the system. That means less chance of something bad getting on the computer but also means they wil be asking you to help install stuff as they won't have access.
If you wish to give the kids full control, set up a new account with admin priveleges, then either strip content form your account and leave it, or simply delete it once you are satisfied that the new accout is working.
This Apple support page is chock-full of helpful tips on manageing accounts and security in OS10.4 Tiger"
http://www.apple.com/support/tiger/accounts/

BAPI/FM for setting the user status for the Project definition and WBS elem

Hi,
I have to set the User Status for the Project Definition and the WBS elements in that project.
The User status to be set is the same for the project and wbs elements.
Please let me know if there is any BAPI/FM to set the user status..
Thanks in advance.
Regards
Shiva

Hi Shkithija,
There is a dump encoutered in the form "PS_FLAG_GET_GLOBAL_FLAGS" for 'chk_precommit_ok' in the "BAPI_PS_PRECOMMIT".
But it is showing SY-SUBRC = 0 when used along with BAPI_TRANSACTION_COMMIT.
May i know what are input parameters we need to pass it to "BAPI_PS_PRECOMMIT".
Do you have any idea.
Please let me know
Regards
vishnu

Setting user status using actions in business activity

Hi
I have defined a new action profile. In that I have defined a new action using which I want to set user status to overdue. I have also defined a new user status "overdue".
Now I want to set user status to overdue. For that we have defined new badi implementation also, but it is not able to change the status.
Please tell me what all steps I need to do, to make it work.
Thanx in advance.
Cheers
Hitesh

Hi Hitesh,
Check whether processing parameters are given correctly
It should be given as below
Element : PROCESS
Name : PROCESS
Type Name : CRM_J_STATUS
Initial value : OPEN (here you can give the one you want )
Let me know if you have any issues.
Reward points if it helps.
Regards,
Madhu

Bapi to set user status of a task

Hi,
I am looking for a bapi or method to set the user status of a task.
We have created a status profile for user status and need to set the user status of the task in the dpr_attributes badi based on some conditions.
I tried bapi BAPI_BUS2175_SET_STATUS but it either says status profile not found or if i assign the status profile to the task it says status profile already active but never changes the user status.
I checked method SET_DATA_EXT of class CL_DPR_TASK_O but it does not have user status field for modifying whereas GET_DATA_EXT method has the user status but it wouldn't help to change the user status.
If anyone has any idea on this it will be extremely helpful.
Regards,
Simmi

Hello!
Please try the following code, it works for us (let's say the status profile is already active, otherwise you have to add the corresponding export parameter):
DATA: BUS           TYPE BAPI_TS_BUSINESS_TRANSACTION,
            RETURN    TYPE STANDARD TABLE OF BAPIRET2,
              BUS-BUSINESS_TRANSACTION = 'SET_USER_STATUS'.
              BUS-USER_STATUS = your_user_status.
              CALL FUNCTION 'BAPI_BUS2175_SET_STATUS'
                EXPORTING
                  TASK_GUID               = task_guid
                  IS_BUSINESS_TRANSACTION = BUS
                TABLES
                  RETURN                  = RETURN.
If still not working, you can have a look to the following SAP Note: 954975
Matthias

User status for quality notification

Hi All,
from which table we can get user status for a particular notification which is active status.
Thanks in advance

Hi,
You need to get the OBJNR(object number) for the notifications and then use the FM: STATUS_READ.
This FM will give you list of all the status or only active status( Set ONLY_ACTIVE = X in FM)..
Hope this helps
Regards
Shiva

Need help on to set User status for Operations in Maintenance order

Similar Messages

Maybe you are looking for