Need help on using more than 28 number of connector in panes

Hai,
There are six subvi's in my utility and each outputting atleast 8 indicators in the panes. In the main program i need to collect all and display. How is this possible?
Any ideas/suggestions?
Thanks,
Mathan
Solved!
Go to Solution.

I ran into that issue with my frist app. I used the worse case connector and diagram looked like a spider.
In the"wrapping it up" section of my Action Engine Nugget I talked about passing value in or out using a cluster. This lets me pass more than one value via the terminal. So you a cluster (type def prefered to make code changes eaier).
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

Using more than one Send connector

Hello
Is it possible to use more than one send connector? Of course it is ;-), but also whit this requirement? I have an additional domain hosted on my exchange. This domain has to use a smarthost with authentication. Now, only this two users should could use this connector. It would be cool, if there is a permission config to allow a group and deny the others or something like this... What could be a solution?
Thanks
Norbert

Hi,
Would help to know the version of the Exchange in your environment.
For Exchange 2003, please do the configuration on the send connector.
Expand ESM, Administrative Groups, Routing Groups, Connector, right click the send connector, select the Properties, in the Delivery Restrictions, please apply with the corresponding group.
For Exchange 2007, routing based on specific senders or a group is not supported in Exchange 2007 by design.
Thanks
Allen

Need help with haivng more than one Ipod.....

Ok, I have gone through these posts and am still having trouble. I already had my daughters shuffle on our computer from last year. My husband and I both got Ipods for Christmas this year. I registered mine under a different email and created a new account for mine so it would be different than my daughters. As soon as I plug mine into the computer, it loads ALL of her songs onto mine. I had to restore my Ipod to delete all the songs but if I plug it in again, it will start to load all of her songs onto mine again. What am I doing wrong? I purchased one song to test it and it adds it to her list. I have seen the posts on here about making the seperate playlists but I have no clue what I am doing. All I know is that as soon as I plug mine back in, I am getting all her songs. What steps do I need to take to fix this. Please help!! With 3 Ipods, What is the best way for me to set this up. Anyone that can help please feel free to also email me directly, I am deseperate. Thanks!
HP Windows XP

I have just posted a similiar question - my son got an iPod for Christmas and I can't make a seperate account either. Here is a link that someone sent me...maybe it will help you.
The only thing that will help me is someone else coming over and doing this for me because I'm going out of my mind trying to fix it! Good luck.
http://docs.info.apple.com/article.html?artnum=61148

How to create Search Help using more than 1 table

Hi all,
I need to create a search help using more than 1 table.
Eq:- Itable1 contains the data and Table2 contains the description of a field.
In my search help i require A field from Table1 and For the corresponding field description from Table2.

Hi,
You can do this with the help of collective search help.
Collective search helps:- Combination of elementary search helps. When we need to fetch data based on multiple selection criteriau2019s. More than one tables are Selection from multiple tables
Steps for creating collective search help.
1) Enter the search help name and click on create.
2) Choose Collective search help radio button option as the search help type.
3) Enter the search help parameters.
Note that there is no selection method to be entered for a collective search help.
4) Instead of the selection method, we enter the included search helps for the collective search help.
5)We need to assign parameters for each of the included search helps.
6) Complete the parameter assignment by clicking on the push button.
7) Collective search help offers the user to obtain F4 help using any of the included search helps.
Hope this will help you:
Reagrds:
Alok

"this iPhone has used more than 5 apple id's" please help.

I have my friend's iPhone 4 but I have restored the phone, still when I try to log in into iCloud, it gives me an error "this iPhone has used more than 5 apple id's" please help.

You think you are logging into icloud, but the error you get indicates that you are trying to create a new account. Since each device has a limit to the number of ID it can create (you seem to have reached that limit), then IF you are trying to create a new account, you'll have to use a different device or computer to do that. Otherwise you are not entering an ID to an existing icloud account.

Can we use more than one Help Provider class in a same project in ADF11g

Hi All,
There are two help providers i want to use .They are "ResourceBundleHelpProvider","OHW Help Provider"
In adf-settings.xml file
<help-provider>
<help-provider-class>oracle.adf.view.rich.help.ResourceBundleHelpProvider</help-provider-class>
<property>
<property-name>baseName</property-name>
<value>com.symmetry.dashboard.panels.Help</value>
</property>
</help-provider>
if try to register both help providers confliction occurs. Is it possible to register and use more than one help provider.?
Thanks in advance.:)

Thanks Frank,
In adf-settings.xml file
<help-provider>
<help-provider-class>oracle.adf.view.rich.help.ResourceBundleHelpProvider</help-provider-class>
<property>
<property-name>baseName</property-name>
<value>com.symmetry.dashboard.panels.Help</value>
</property>
</help-provider>
<help-provider prefix="RB_">
<help-provider-class>oracle.help.web.rich.helpProvider.OHWHelpProvider</help-provider-class>
<property>
<property-name>ohwConfigFileURL</property-name>
<value>/myHelpset/config.xml</value>
</property>
<property>
<property-name>baseURI</property-name>
<value>http://127.0.0.1:7101/Dashboard_workflow/myHelpset/%3c/value>
</property>
</help-provider>
I differentiated the help providers with the "prefix" attribute in the <help-provider> tag. So now confliction is not occuring between those.
I used this prefix in the "helpTopicId" property of the adf components like "input text box" . I got the result. :)

Mac pro with 16GB RAM for CS3? CS3 cant use more than 3 GB? why

hi
does it make any sense to buy 16GB RAM for a mac pro
only for working with CS3?
i am retouching prof. and in the moment we run CS2 on the mac pro.
later CS3 is in the pipeline.
we ordered 16GB RAM in order to work with HDR images and big file sizes coming from hasselblad h2 and h3 (300dpi, 23 x 23inch, round 50 or 100 layers, filesize 1 - 2GB per image.)
thanks

found this article @ adobe website
thanks for your help!
"When you run Photoshop CS3 on a 64-bit operating system, such as Mac OS X v10.4 and later, Photoshop can access up to 8 GB of RAM. You can see the actual amount of RAM Photoshop can use in the Let Photoshop Use number when you set the Let Photoshop Use slider in the Performance preference to 100%. The RAM above the 100% used by Photoshop, which is from approximately 3 GB to 3.7 GB, can be used directly by Photoshop plug-ins (some plug-ins need large chunks of contiguous RAM), filters, and actions. If you have more than 4 GB (to 8 GB), the RAM above 4 GB is used by the operating system as a cache for the Photoshop scratch disk data. Data that previously was written directly to the hard disk by Photoshop is now cached in this high RAM before being written to the hard disk by the operating system. If you are working with files large enough to take advantage of these extra 2 GB of RAM, the RAM cache can increase performance of Photoshop.
The default RAM allocation setting in Photoshop CS3 is 70%. These settings should be optimal for most users. To get the ideal RAM allocation setting for your system, change the RAM allocation in 5% increments and watch the performance of Photoshop in the Activity Monitor. You must quit and restart Photoshop after each change to see the change take effect.
The available RAM shown in the Performance preferences has already deducted an amount that is reserved for the operating system from the total RAM in your computer. You shouldn't set the percentage of RAM to be used by Photoshop to 100% (unless you are using more than 2G of RAM) because other applications which run at the same time as Photoshop (for example, Adobe Bridge CS3) need a share of the available RAM. Some applications use more RAM than you might expect. For example, web browsers can use 20-30 MB of RAM, and music players can use 20-50 MB of RAM. Watch the Activity Monitor to view the RAM allocations on your computer.
Watch your efficiency indicator while you work in Photoshop to determine the amount of RAM you'll need to keep your images in RAM. The efficiency indicator is available from the pop-up menu on the status bar of your image or from the Palette Options on the Info Palette pop-up menu. When the efficiency indicator goes below 95-100%, you are using the scratch disk. If the efficiency is around 60%, you'll see a large performance increase by changing your RAM allocation or adding RAM."

Can I use more than one Apple ID on one device

I have seen some answers to this type of question before but not that since the ios 6 so will ask again. My household shares an Apple ID and it has worked great as we have added devices and purchased apps. My problem now is this, we have hit a point where I have work things on my iPad and iPhone that I really don't need to be shared with the whole family but it isn't a major deal or security risk. I don't want to give up the advantages of having the household ID. Is there an easy way to have another ID on my iPad and switch between them without having major complications? I am for the most part a techie so not afraid of these kind of things but I can't afford to lose everything right now and take the time to set it all back up so getting advice here. Thanks in advance for any help you can give.

You can use more than one apple id, but keep in mind that when apps need updating that you'll will need to sign in with correct credentials to update them.
Share an apple id for the itunes and app stores, but keep your own for icloud, facetime and messages.
Managing and Sharing multiple id's with your family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

How to use more than one application server during initial load?

Hi,
we plan to use more than one application server in CRM during initial download in order to increase the number of parallel requests and to decrease the time for the initial load. Is there a way to allocate requests to more than one server? Is is possible via multiple rfc connections for consumer CRM in CRMRFCPAR?
Thanks.
Alexander Schiffer

Hi Naresh,
thanks for your answer. It has solved my problem. SMLG is the transaction that I was looking for.
Two more OSS notes that helped me to guide our basis into the right direction:
OSS 593058 - New RFC load balancing procedure
OSS 1413986 - SMLG: Possibility to select a favorite type for Ext.RFCs
Thanks again.
Alexander Schiffer

Using more than one web font in the same text field

I know I can do something like this when calling more than one weight in a web font:
sym.$('copy').html('Adobe | About Us')
And the word Adobe will be bolder than About Us. But what about using more than one font in the same text field? I tried this:
sym.$('copy').html('UHLIG | About Us')
Now that doesn't work and I get a SyntaxError: missing ) after argument list
I then tried
sym.$('copy').html('UHLIG | About Us')
and the text rendered but whatever was selected in the font menu was what got displayed.
Is there a way around this to display two different fonts, web fonts or not, in the same field?

Hey, ladobeugm-
One thing to note is that you probably need to escape the quotes in your span tag. What you have is an issue with quotation marks - for instance, all JavaScript sees is <span style="font-family: in your first string, and only sees <span style="font-family: " in your second. Play around with escaping to see if you can get your span to work.
Hope that helps,
-Elaine

Can you use more than one email address on one account as to enable two or three devices to use imsg????

Can you use more than one email address on one account as to enable two or three devices to use imsg as when i add new email address's in settings it just says veriyfying and nothing happens????

If I read your question right, yes.
My pad has two e mail addresses, and my phone has a phone number as well as a e mail address. For each device you can add additional 'receive at' addresses in settings.
Note, when you add a new address, apple will send an e mail to that new address that you need to respond to, to show that it is a valid address. So look in the inbox of that e mail account for the verification e mail. Note further, some spam filters think that the verification e mail might be spam, so if it does not show up in your in box, look in any spam file you might have.
in my case, the verification e mail came within a few minutes of declaring the new address.
The multiple address are useful if you have more than one device under your apple id, and want to be able to send stuff to that particular device.

Can I use more than one flash-drive for ready-boost on Satellite L650/0ed

Hi,
I have a toshiba Satellite L650/0ed, is it alright if i use more than one 8gb flash-drive for 'ready boost' - what is the maximum number of flash-drives use can dedicate to 'ready-boost'.
In addition, if i use a 16gb flash-drive, will this dedicate more memory to 'ready-boost'.
Why is the seagate 1tb 3.5 expansion drive not compatible for ready-boost.
Thank you,
-Brent907

Hi mate
Please check this Microsoft page which describes the ReadyBosst
http://windows.microsoft.com/en-US/windows7/products/features/readyboost
There you can find this statement:
+ReadyBoost works with most flash storage devices. In Windows 7, it can handle more flash memory and even multiple devices *up to eight* , for a maximum 256 gigabytes (GB) of additional memory.+
Hopefully this can be helpful!

Using more than 2 control points in Interpolater.Spline

Hello,
what I'm working on is a bouncing ball, I figured it might work controlling the interpolator to create a multiple control points using the spline. ( a function with x ^n^ , where n is the number of control points)
In a spline I can use only two control points, is there a way to make it use more than that, or do i have to use another way.
Thanks for all help.
Edited by: A.m.z on May 9, 2013 1:49 AM
Edited by: A.m.z on May 9, 2013 1:49 AM

Well, I guess it wasn't so hard - at least when there are libraries written by others to borrow from . . .
This interpolator requires the apache commons math 3.2 lib - you can download commons-math3-3.2-bin.zip from here:
http://commons.apache.org/proper/commons-math/download_math.cgi
Extract commons-math3-3.2.jar from the zip and put it on your class path.
This interpolator differs a little from the Interpolator.SPLINE interpolator that comes with JavaFX.
Instead of control points which bend the curve but do not lie on the curve, the interpolator takes a set of points and plots a curve of best fit directly through the points.
import javafx.animation.Interpolator;
import org.apache.commons.math3.analysis.interpolation.SplineInterpolator;
import org.apache.commons.math3.analysis.polynomials.PolynomialSplineFunction;
public class BestFitSplineInterpolator extends Interpolator {
final PolynomialSplineFunction f;
BestFitSplineInterpolator(double[] x, double[] y) {
 f = new SplineInterpolator().interpolate(x, y);
@Override protected double curve(double t) {
 return f.value(t);
}Here is an example usage:
import javafx.animation.*;
import javafx.application.Application;
import javafx.scene.* ;
import javafx.scene.paint.*;
import javafx.scene.shape.*;
import javafx.stage.Stage;
import javafx.util.Duration;
public class BestFitSplineDemo extends Application {
private static final Duration CYCLE_TIME = Duration.seconds(7);
private static final int PLOT_SIZE = 500;
private static final int N_SEGS = PLOT_SIZE / 10;
public void start(Stage stage) {
 Path path = new Path();
 path.setStroke(Color.DARKGREEN);
 final Interpolator pathInterpolator = new BestFitSplineInterpolator(
 new double[] { 0.0, 0.25, 0.5, 0.75, 1.0 },
 new double[] { 0.0, 0.5, 0.3, 0.8, 0.0 }
 // interpolated spline function plot.
 plotSpline(path, pathInterpolator, true);
 // animated dot moving along the plot according to a distance over time function.
 final Interpolator timeVsDistanceInterpolator = new BestFitSplineInterpolator(
 new double[] { 0.0, 0.25, 0.5, 0.75, 1.0 },
 new double[] { 0.0, 0.1, 0.4, 0.85, 1.0 }
 Circle dot = new Circle(5, Color.GREENYELLOW);
 PathTransition transition = new PathTransition(CYCLE_TIME, path, dot);
 transition.setInterpolator(timeVsDistanceInterpolator);
 transition.setAutoReverse(true);
 transition.setCycleCount(PathTransition.INDEFINITE);
 transition.play();
 // show a light grey path representing the distance over time.
 Path timeVsDistancePath = new Path();
 timeVsDistancePath.setStroke(Color.DIMGRAY.darker());
 timeVsDistancePath.getStrokeDashArray().setAll(15d, 10d, 5d, 10d);
 plotSpline(timeVsDistancePath, timeVsDistanceInterpolator, true);
 stage.setScene(
 new Scene(
 new Group(
 timeVsDistancePath,
 path,
 dot
 Color.rgb(35,39,50)
 stage.show();
// plots an interpolated curve in segments along a path
// if invert is true then y=0 will be in the bottom left, otherwise it is in the top right
private void plotSpline(Path path, Interpolator pathInterpolator, boolean invert) {
 final double y0 = pathInterpolator.interpolate(0, PLOT_SIZE, 0);
 path.getElements().addAll(
 new MoveTo(0, invert ? PLOT_SIZE - y0 : y0)
 for (int i = 0; i < N_SEGS; i++) {
 final double frac = (i + 1.0) / N_SEGS;
 final double x = frac * PLOT_SIZE;
 final double y = pathInterpolator.interpolate(0, PLOT_SIZE, frac);
 path.getElements().add(new LineTo(x, invert ? PLOT_SIZE - y : y));
public static void main(String[] args) { launch(args); }
}Edited by: jsmith on May 11, 2013 5:58 AM

Use more than one DB in InfiniteInsight

Hi,
I want to know if is it possible to use more than one Data Base for create a Data Source in InfiniteInsgiht and how.
Thank you very much.

Hi Daniel and Edouard,
I would first like to clarify one point: SAP InfiniteInsight can read data from the database directly.
If your data are in a table or view, you can select the option "Use a File or a Database Table".
With this same option, you can also enter a SQL query in "Data Set" :
Now, as Edouard mentioned, you can also use Explorer to create a more complex dataset for your analysis.
Technically, you will need to enter either one database connection or file as input for your different analyses. That being said, if you need to access 2 databases, (let's call them A and B) there is a way.
It's called heterogeneous database system. You have to configure your database A to enable an access to database B.
SAP InfiniteInsight will be connected to A which has access to B. Thus, you will be able to use data from 2 different databases.
I am unfortunately no a database specialist, I am not sure all DB enable this and the procedures might be complex.
Hope this helps,
Armelle

Force VM Buffering to Use More than 3.5GB RAM - Good Idea?

Sorry if this was explained, but I didn't see the short answer in any of the other threads I just stumbled on (and it sounds interesting).
First: Download and Info:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402029&sliceId=1
The information about VM Buffering in Photoshop CS3 is confusing at first glance.
First it says it gives PS access to about 8GB RAM and speeds things up, then it says it slows things down.
What might be the short recommendation on 2008 Mac Pro 2.8 8-core, 4 internal SATA (no RAID), 10.5.2 Leopard, 14GB RAM?
Files range from 20MB-1GB.
Should I be using these plugins?
ForceVMBuffering.plugin
DisableVMBuffering.plugin

>Just to be sure now, if I install ForceVMBuffering plugin, Photoshop CS3 will use more than the 3.5 GB?
As long as we're clear on what "use" means. The primary function of the VM buffers is to put as much scratch data as possible into RAM, instead of using the normal and much slower scratch hard disks you set in Preferences. That means if you are using a file so small that Photoshop wouldn't need to swap out to the scratch files, you may not see it take much high RAM. Also, my understanding is that because buffering is only about scratch files, it does not help provide more RAM to calculate a single operation, such as a running a complex filter on a very large layer. But if you never see "out of RAM" errors (and most people don't, because Photoshop is already well optimized), you don't need to worry about having enough RAM for operations. You only need to be concerned about using any extra available RAM for performance-enhancing memory buffers, and that's what Photoshop takes care of with VM buffering.

Need help on using more than 28 number of connector in panes

Similar Messages

Maybe you are looking for