Need help on where to post

Can someone point me in the right direction of where to post a problem I have been having. With two different monitors, an apple VGS and a Viewsonic flatscreen, my displays have a fragmented image after going into sreensaver mode. I have searched under keywords "display - monitor, fragmented - image" and can't find anything remotely near my problem. Any suggestions on where to post this or look? Affected - B&W G3/10.3.9 + 9.2.2
sarahj

if it happens with two different monitors, and only occurs when the screensaver kicks in, and does NOT happen if you boot in os9 as opposed to running under osx classic, then i'd assume it's a software issue and post in the pre-10.4 osx forum...
http://discussions.apple.com/forum.jspa?forumID=745
if it happens no matter which os you boot from then i'd assume a hardware issue and post in the appropriate forum for your g3 system...
http://discussions.apple.com/category.jspa?categoryID=105

Similar Messages

HT1338 Need help locating where and how to update Mac OS-X 10.6.5 to the latest Mountain Lion Software...thanx John

I need help locating where and how to update Mac OS-X to Mountain Lion.....Thanx....Jay

First update your 10.6 version to 10.6.8 from the software update under the Apple Menu.
This will add direct access to the Mac App store via a new application.
Now launch the App Store from your Applications folder - Its the new icon a letter A formed from a ruler pencil and pen on a blue circle !
Once launched you need to add your iTunes account details or create an account add payment details etc...
Sign in purchase download and follow install processes to upgrade to 10.8 Mountain Lion.
OH and to be safe BEFORE you install backup your current system to an external drive !

Need help submitting an HTML Post command

Hi Everyone,
I need a help submitting a POST command to an Apache Server. I unfortunately have almost no expierience with HTML. Can anyone give me a simple example to start with and what I might need to do?
Thank you very much in advance,
Oz
Message Edited by OzRuiz on 12-18-2007 09:18 AM
Message Edited by OzRuiz on 12-18-2007 09:21 AM

This is actually very simple with native LabVIEW functions.
Use an TCP Open Connection to open a port to the server (I used
ws.cdyne.com, with port 80).
Send your request with TCP Write (I send the text listed below. This text is
copied directly from the ws.cdyne.com web page, where you can find examples
for POST, GET and others).
Read back the data with TCP Read.
Close the connection with TCP Close Connection.
Note that the data you send and receive doesn't need to be HTML. It could be
any text, but most likelly XML or HTML. In this case it's a soap message,
basically an XML format designed for communicating with servers. Some
servers send the data back in several parts, but I have not found any
describtion about this format.
Regards,
Wiebe.
+++++++++++++++++++++++++++++
POST /ip2geo/ip2geo.asmx HTTP/1.1
Host: ws.cdyne.com
Content-Type: text/xml; charset=utf-8
Content-Length: 391
SOAPAction: "http://ws.cdyne.com/ResolveIP"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<ResolveIP xmlns="http://ws.cdyne.com/">
<IPaddress>62.250.4.144</IPaddress>
<LicenseKey>0</LicenseKey>
</ResolveIP>
</soap:Body>
</soap:Envelope>
++++++++++++++++++++++

IPhoto-I need help identifying where the photos are

On another forum (Mac rumours), somebody posted:
the way iPhoto works is that when you import pictures into iPhoto, it will be stored on an iPhoto library file, literally called "iPhoto Library". This file is normally stored in your "Pictures" folder, but if you moved it to an external hard drive, thats where it will be. So any stray pictures you can see outside of iPhoto (for example, any pictures you see in your pictures folder) doesn't necessarily mean its in iPhoto, and are not actually linked to iPhoto in any way. So anything you do to those, whether its delete, edit, or move, the iPhoto library will not capture those changes since it has its own copy of the file stored in the iPhoto library file.
My Q is this: I see numerous photos right below the iPhoto library, in Finder (see below): are the .jpg files that I see, the ones that are in my iPhoto library? In others words, if I delete them, will they also be deleted from my iPhoto library? It would seem from the above posting that the "stray" photos are *not* part of the iPhoto library, but I'm unclear as to whether this is so, or whether I've misunderstood what they wrote. I want to know if the individual jpg's (that are listed under iphoto library, *are* my photos within my iPhoto library.
Thanks very much!

Keith:
Thanks a lot for this. So, I *have* checked the iPhoto Library (by that, I mean clicking on iPhoto library-the 20.12 gb file you see above in my screenshot) and my photos are all there. At least, I'm 99.9% sure they are *all* there. I've created albums and moved some photos into albums, but suffice to say that when I open iPhoto, I have 2,000+ photos in "Photos" and in my most recent album I have 900; when I count the # in the above screen shot, there are approx 1,100 so I'm sure I have all or most of them. I'm just wondering how they got there....
Terrence:
I didn't make any change to the Library settings and the box *is* checked so I'm presuming I don't have a referenced library. My iPhoto library is on my external hard drive-I've chosen that location to import my photos from my iPhone, With that, what is the difference between my iPhoto library and a folder called "iphoto libraries"; I must have created the folder called iPhoto libraries, but the jpg's that are in that folder are also the photos/files that are in my iPhoto library....give or take a few (I've deleted some along the way from my iPhoto library).
I'm not understanding the structure of the files, i.e., can I safely delete the .jpg files in the folder "iPhoto libraries"? Terrence-from what you can see in the screenshot, did I manually copy the files to that location? I don't recall doing so. All I know is that I imported my photos from my iPhone to my external hard drive.
When I click on iPhoto library....the large file (20.12 gb) all of my photos are there.
Many thanks for any clarification you can provide (I'm happy to provide further screen shots for you if it will help you make sense of my structuring)!

Needed Help: SAP User cannot Post in any of the transactions

Hi Experts,
I have a problem on our QAS system, I have tried to post a lot of documents in transaction MIGO, in creating RFQ through ME41, in Posting Accounting Document in FB50. But all of them failed with the Express Document appearing at the end of the "Document Number Created" message.
Express Documents range from:
I. "MESSAGE_TYPE_X" when creating RFQ of One Time Vendors:
+Short text of error message:
Database error changing table ADRC
Long text of error message:
Technical information about the message:
Message class....... "AM"
Number.............. 842
Variable 1.......... "ADRC"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Information on where terminated
Termination occurred in the ABAP program "SAPLSZA0" - in "ADDR_SAVE_INTERN".
The main program was "RSM13000 ".
In the source code you have the termination point in line 553
of the (Include) program "LSZA0U47".
The program "SAPLSZA0" was started in the update system.+
II. SAPSQL_ARRAY_INSERT_DUPREC, Post Goods Receipt in MIGO
+An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "INSERT_TABLES" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)+
III. SAPSQL_ARRAY_INSERT_DUPREC, Posting through FB50
+An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in procedure "INSERT_TABLES" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)+
Please provide direct solution for the system problem. And please tell me also what are the usual causes of these problems (Configuration-wise or ABAP)

Hi Experts,
I already investigated this in the system and this issue still occurs I already changed the current number in transaction code OMBT, still error occurs in Posting any Account Documents. When I change the current number manually, then post a document in MIGO, the document number will be displayed in the status bar. But once you tried any function/push any button, an express document will be displayed with the error DUPREC.
I checked in OMBT the current number range and it's incrementing to 10 example if last current doc number is 5000000510, the new current doc number will be 5000000520.
Do we have any confoguration that will correct this increment on the number range interval for Accounting Documents? Curerntly only Accounting Documents cannot post, other than these documents like Sales Order, PO, PR, etc. they can be created.
There are no changes in the user exits affecting the transaction as it was running smoothly last month.
Please help. Thanks a lot!

Need Help: SAP User cannot Post on every Transaction

Hi Experts,
I have a problem on our QAS system, I have tried to post a lot of documents in transaction MIGO, in creating RFQ through ME41, in Posting Accounting Document in FB50. But all of them failed with the Express Document appearing at the end of the "Document Number Created" message.
Express Documents range from:
I. "MESSAGE_TYPE_X" when creating RFQ of One Time Vendors:
+Short text of error message:
Database error changing table ADRC
Long text of error message:
Technical information about the message:
Message class....... "AM"
Number.............. 842
Variable 1.......... "ADRC"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Information on where terminated
Termination occurred in the ABAP program "SAPLSZA0" - in "ADDR_SAVE_INTERN".
The main program was "RSM13000 ".
In the source code you have the termination point in line 553
of the (Include) program "LSZA0U47".
The program "SAPLSZA0" was started in the update system.+
II. SAPSQL_ARRAY_INSERT_DUPREC, Post Goods Receipt in MIGO
+An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "INSERT_TABLES" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)+
III. SAPSQL_ARRAY_INSERT_DUPREC, Posting through FB50
+An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
in
procedure "INSERT_TABLES" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
If you use an ABAP/4 Open SQL array insert to insert a record in
the database and that record already exists with the same key,
this results in a termination.
(With an ABAP/4 Open SQL single record insert in the same error
situation, processing does not terminate, but SY-SUBRC is set to 4.)+
Please provide direct solution for the system problem. And please tell me also what are the usual causes of these problems (Configuration-wise or ABAP)

Hello Cecilio,
all these problems have the same root cause likely: the number range. Here's a step-by-step solution for each one of them:
for problem I:
Please implement the report from the note #445575 and check the address range.
My suggestions:
1. Please run the report "Z_OSSNOTE_445575" from the note #445575 to find out the highest address number already assigned in ADRC, ADRP together.
2. Add (say) 100 number to it.
3. Then, change the value of the current number in SA01 transaction, button "status".
for problem II:
please follow the steps with regards to resetting the number range buffer as per the note #83731:
83731 SAPSQL_ARRAY_INSERT_DUPREC for INSERT COBK
Also, can you please review these notes?
#419538 Deleting commitments for earmarked funds at prod. startup
#824771 KBxxN: Program termination SAPSQL_ARRAY_INSERT_DUPREC
for problem III:
the problem occured because of a problem with your number range buffer (again);
Please have a look into note 83731 and reset the number range buffer:
First reset the number range buffer of the application server. Start Transaction SM56 and choose 'Number range buffer -> Reset'. Fill the fields of the following dialog field as follows:
    Client           <current client>
    Object           RK_BELEG
    Sub-object       <controlling area>
    Range
    Year
    Global Reset     X
Let us know if this has solved the problems.
Best Regards,
Tomas Black

I Need help with where to install .pto files.

I have several preset files in the .pto format and I'm trying to install them into PS 5.1 and can't figure out where to deposit them so the program recognizes them and makes them available for use. Any help greatly appreciated!

That file extension .pto doesn't sound familar as far as anything photoshop uses.
What are they supposed to be used for in photoshop?

Need Help on where clause condition

Hello All,
Thanks in advance::
I have below SQL query which is returning 1500 records when i dont use any condition in where clause(Please see the query below);
SELECT POS_TYPE,
POS_ID,
SUB_ACNT_ID,
CHRG,
DOC,
NULL,
ACNT_RLN,
ACCOUNT_FLODERS_VER,
DM_LSTUPDDT,
DM_BTNUMBER,
DM_USERID,
DM_WSID,
STAT_FLG,
SERVICES_FLG,
SERVICES,
INTRST_COND,
PST_INSTRN
FROM &&SRC.ACCOUNT_FOLDERS,
&&SRC.DB;
Output: 15 rows retured
And when i validate the data by putting some conditions in where clause , it is giving 1499 records ( Please see the query below with condition )
SELECT POS_TYPE,
POS_ID,
SUB_ACNT_ID,
CHRG,
DOC,
NULL,
ACNT_RLN,
ACCOUNT_FLODERS_VER,
DM_LSTUPDDT,
DM_BTNUMBER,
DM_USERID,
DM_WSID,
STAT_FLG,
SERVICES_FLG,
SERVICES,
INTRST_COND,
PST_INSTRN
FROM &&SRC.ACCOUNT_FOLDERS,
&&SRC.DB
WHERE (POS_TYPE,
POS_ID,
SUB_ACNT_ID) IN (SELECT POS_TYPE,
POS_ID,
SUB_ACNT_ID FROM ACCOUNT
WHERE DM_LSTUPDDT > 1_LAST_RUN_DATE OR 1_FIRST_RUN_FLAG=1);
Now, I wanted to know that missing record(1st SQL is giving 1500 rows without any condition & 1nd SQL is giving 1499 rows with condition in where clause)
I am worried and confused to find out the missing record. Tried with different conditions like Not In... nothing worked perfectly.
Could some one please have a look and provide me the correct SQL , Performance wise also it should be good, SQL should not cause any performance issues.
Please help me on it..
Thanks,
MKR

Do a minus
SELECT POS_TYPE,
       POS_ID,
       SUB_ACNT_ID,
       CHRG,
       DOC,
       NULL,
       ACNT_RLN,
       ACCOUNT_FLODERS_VER,
       DM_LSTUPDDT,
       DM_BTNUMBER,
       DM_USERID,
       DM_WSID,
       STAT_FLG,
       SERVICES_FLG,
       SERVICES,
       INTRST_COND,
       PST_INSTRN
FROM &&SRC.ACCOUNT_FOLDERS, &&SRC.DB;
MINUS
SELECT POS_TYPE,
       POS_ID,
       SUB_ACNT_ID,
       CHRG,
       DOC,
       NULL,
       ACNT_RLN,
       ACCOUNT_FLODERS_VER,
       DM_LSTUPDDT,
       DM_BTNUMBER,
       DM_USERID,
       DM_WSID,
       STAT_FLG,
       SERVICES_FLG,
       SERVICES,
       INTRST_COND,
       PST_INSTRN
FROM &&SRC.ACCOUNT_FOLDERS, &&SRC.DB
WHERE (POS_TYPE, POS_ID, SUB_ACNT_ID) IN (SELECT POS_TYPE, POS_ID, SUB_ACNT_ID
                                             FROM ACCOUNT
                                            WHERE DM_LSTUPDDT > 1_LAST_RUN_DATE
                                               OR 1_FIRST_RUN_FLAG = 1); G.

I have EMS 3.5 installed and functioning. Need help with where to go next!

Hello All,
I am brand new to this and need a very basic push in the right direction.
I have FMS 3.5 installed on my server and I am ready to begin testing with it.
My website has a page with descriptions of videos and links to those videos.
When a link is selected, I want a new page to open and the video to play in the FMS player.
I have absolutely no idea how to go about this. I need some meaty information here. I read tom Green's tutorials, and although I found that they were informative, they are also quite general.
I have Flash Professional CS4 and I just need to know what the heck to do next.
Any and all help will be supremely appreciated.
Sincerely,
wordman

Gentlemen,
Thank you for the answers, I will definitely look into what you both suggested.
My next step is getting a player into a separate page that plays selected videos through RTMP.
The player that comes with FMS would be fine, but I do not know how to alter it, change colors, etc.
Then I was looking into Real Eyes' REOPS player, and the white papers alone stopped me in my tracks. I realize it's probably easy, but now ehrn you are a novice, to understand it.
Then I saw Adobe Strobe, the OSMF-based player and thought that might be good for me.
The biggest problem I see is that Adobe's resources are not always easy to find on this website, same goes fo rthe OSMF site. Not very well structured sites for a software company.
Bottom line is, I need to get a player on a page that plays though RTMP. Any thoughts there? I'm completely new to Flash.
Thank you all!!!
Sincerely,
wordman

Need help to where small sql query

{ names numbers types
id | name | | id | phone | who | type | | id | type |
| 1 | jenny | | 1 | 867-5309 | 1 | 3 | | 1 | home |
| 2 | tom | | 2 | 555-1212 | 3 | 1 | | 2 | cell |
| 3 | smith | | 3 | 364-4311 | 3 | 2 | | 3 | work |
| 4 | amy | | 4 | 936-2828 | 4 | 3 | | 4 | fax |
| 5 | 525-8722 | 3 | NULL | -----------
i am trying to get out put like this ,:
name type phone
| smith | home | 555-1212 |
| smith | cell | 364-4311 |
| smith | NULL | 525-8722 |
is it posiible to get tree time "smith " in the name column ,that is confusing me a lot
please can any one give idea how to solve this }
Edited by: user4463478 on May 20, 2009 5:38 PM
Edited by: user4463478 on May 21, 2009 11:51 AM
Edited by: user4463478 on May 21, 2009 11:52 AM

What is your table structure? It is confusing. Post your sample input, output, table strucutre etc between {noformat}{noformat} and {noformat}{noformat}
And it looks like this.
and Cheers
Sarma.

Need help decifering where clause

What do these excerpts from where statements do?
1) and a_id = b_id + 0
also
2) and a_position = b.position || ''
More importantly where does this kind of stuff show up in the Oracle documentation (joins?)
Thanks
Holly

Functionally, those clauses are identical to
and a_id = b_idand
and a_position = b.positionThe difference is that adding 0 or concatenating a NULL prevents Oracle from using an index on b_id of b.position. That may have been intentional on the part of a previous developer, particularly if the application was originally written using the rule-based optimizer.
Justin
Frank beat me to it.
Message was edited by:
Justin Cave

New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

So where is LR trying to copy the files? Check your destination in the Import panel at the right.

I purchased the gaming app from app store and I used it for some time but now suddenly the app is not working properly it's not starting properly and just dies down after the start and comes Back to homepage need help please guys help me out with this!

Guys needed your help with my real racingHD game app it's not working properly even after paying for it I don't know why it's not working having trouble with it cause it won't star smooth need help guys

Read Mitch's post on the sad ipod in this thread:
http://discussions.apple.com/message.jspa?messageID=2369954#2369954

I can't find and stet up the Cisco packet tracer program in my Macbook , i need help?

i can't find and stet up the Cisco packet tracer program in my Macbook , i need help?

Check my post
http://rafavg77.wordpress.com/2013/09/07/como-empaquetar-packet-tracer-exe-a-una -app-nativa-en-mac-os-x/
I think it will help, sorry for my english

Need help in debugging vf03

Hi,
i need your help in debugging the vf03 tcode. the senariou is as follows.
in vf03 when i enter the billing document no. and press enter and then when i click on parter push button on the application toolbar and then click on ship-to-party item then under the field tax juridiction cde which is refering to txjcd field of vbadr table im getting the value as TAXUSX instead of a 10 digit value which is present in txjcd field of kna1 table for that particular customer.
and this is happening only for few invoice no's not for all.
i think that some where the data is getting changed or not properly communicated for some invoice numbers.
i need help for where to start tracing and how to debug this error out and the flow logic of debugging.
waiting for ur reply
regards,
maqsood

Hi kahan,
frist you have check with your function consultant is there are mataing the TAX for that countary .
and come to debug.
easyt way is take that screen field name(patha pres F1 and technical attributes ) and program name screen name .
then seach that field in that program screen put break-point at that level and run tranction.
stil you facing any problem send more details i will try to help you.
Do Reward points..if found helpful
thaks,
saleem

Need help on where to post

Similar Messages

Maybe you are looking for