Need help on which router to buy for my BB 8320

Now i know 8320 is dated but at this point i am not planning to change anytime soon .
So I have a router which is kinda old, it didnt really occur to me since it worked. When i got my bb 8320 i was in a hotel and i could connect through their wireless without any hassle. I could surf, use youtube, name it.
When i got home i couldnt do anything, i spent countless nights trying to figure out waht was wrong then i realized its my router. If only BB said somethign it wont support old routers then i wouldve saved myself hours of self-loathing.
Anyways I also have gone to my friends house, and i could connect to her linksys router without any hassle. i was the one who set her router up and we bought it this year. i didnt do anything special, configuration-wise or w/e.
So NOW i am just going to buy a new router. I really need help!!!!
I was wondering if this one is good:
W311R Wireless-N Broadband Router
W311R integrates the wireless AP, router, four-port switch and firewall in one, and increases over 4 times transmission range of ordinary 802.11g products. Compatible with IEEE802.11n (Draft 2.0) and IEEE802.11g/b standards, it can provide up to 150Mbps stable transmission rate. It is dedicated to SOHOs and students’ dormitory. In addition, URL and MAC address filtering can take it easy for parents and network administrator to manage network life, and QoS bandwidth control over specific computer’s downloading speed is supported as well. Moreover, UPnP and WMM support can smooth your MSN voice better, and the included Setup Wizard on CD-ROM will be easy and fast for non-savvy users to install the device and access to the Internet.
Overview:
* Includes router, wireless access point, four-port switch and firewall in one
* Provides up to 150Mbps uploading and downloading speed
* Supports two WPS (Wi-Fi Protected Setup) encryption methods: PBC and PIN
* Compliant to IEEE802.11n, IEEE802.11g, IEEE802.11b, IEEE802.3 and IEEE802.3u standards
* Supports far-distance transmission, 100 meters indoor, 400 meters outdoor (depends on the environments around)
* Supports 64/128-bit WEP encryption, WPA and the latest WPA2 encryption security authentication
* Supports RTS/CTS protocol and data partitioning function
* Provides one 10/100Mbps Auto-Negotiation Ethernet WAN ports for WAN connection
* Provides four 10/100Mbps Auto-Negotiation Ethernet LAN ports for LAN connections
* Supports xDSL/Cable MODEM, static and dynamic IP in community networking
* Supports remote/local Web management
* Supports WMM to better smooth your voice and video
* Supports SSID stealth mode and access control based over MAC address (up to 30 entries)
* Supports Auto MDI/MDIX
* Supports wireless Roaming technology and ensures high-efficient wireless connections
* Supports auto negotiation/manual mode for 802.11b/802.11g/802.11n
* Supports UPnP and DDNS
* Supports Firefox 1.0, IE5.5 or above
* Supports SNTP
* Supports virtual server, DMZ host
* Built-in firewall for hacker’s attack prevention
* Supports DHCP server/client
* Supports auto wireless channel selection
* Supports the control over LAN access to Internet
* Provides syslog to record the status of the router
* Supports WDS wireless network extension
* Supports QoS function
Input Voltage Range
AC 110~240V
Output Voltage Range
9V~1000mA
Consumption
20dbm
Operating Temperature
0? ~ 40?
Storage Temperature
-40? ~ 70?
Operating Humidity
10% ~ 90% RH non-condensing
Storage Humidity
5% ~ 90% RH non-condensing
Antenna
One Non-detachable external antenna (5dBi)
Frequency Range
2.4GHz-2.5GHz
EVM
-30dB
Sensitivity
54M:-74dBm@10% PER; 11M:-85dBm@8% PER; 6M:-88dBm@10% PER; 1M:-90dBm@8% PER
Outdoor
400m
Indoor
100m
WLAN?LAN
93Mbps
WLAN?WLAN
93Mbps
Frequency Range
2.4GHz
Gain
5dBi
Nominal Impedance
50
Polarization
Linear; Vertical
Maximum Power
1W
* Vertical Beamwidth 360º

Flip UltraHD.
Shoots mp4 H264 format files. Fits in a shirt pocket and records 2 hrs worth of material to an internal card. Charges from your USB port as you download. If you are just trimming clips, you can use QT Pro without conversion. If you need to edit, convert to ProRes 720p30. Works like a dream.
Just make sure you have it solidly placed when you pull the trigger as there is no image stabilization.
Oh, and it is only $199 US.
x

Similar Messages

  • I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

    I need help identifying which Magsafe Power Adapter I need for my Macbook Pro Model A1398, EMC 2673?

    Provided the computer-end fits, you are free to use one with a HIGHER Wattage rating. No damage whatsoever will be done to any component, but it will likely run cooler (but may be slightly heavier).
    If you use one with too LOW a Wattage rating, you will not be able to charge and run at the same time, and your computer's top speed (for its most intensive computations) will be limited.

  • Hi all! I need to buy iPad tomorrow. Need your advice which iPad to buy? For almost the same money I can buy iPad 2   3g or iPad 4 wireless only. Both of them are 16gb and price difference is 70€ for iPad 4

    Hi all! I need to buy iPad tomorrow. Need your advice which iPad to buy? For almost the same money I can buy iPad 2 + 3g or iPad 4 wireless only. Both of them are 16gb and price difference is 70€ for iPad 4

    16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
    http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
    How much content will fit on my iPod or iPhone?
    http://support.apple.com/kb/HT1867
    iPad Mini vs. iPad 2 vs. iPad 4: Which iPad Should You Buy?
    http://www.padgadget.com/2012/10/25/ipad-mini-vs-ipad-2-vs-ipad-4-which-ipad-sho uld-you-buy/
     Cheers, Tom

  • Need help accessing the router web page.  I have been tol...

    Need help accessing the router web page.  I have been told my router is acting like a switch and the IP address is not in the proper range.  I have tried reseting the router (hold for 30 sec and unplug for 5 mins).  Didn't work.
    thanks

    What router are you using?  Almost all Linksys routers use 192.168.1.1 as the default local IP address, but there is at least one that uses 192.168.16.1 , namely the WTR54GS  (not the WRT54GS).
    You need to try again to reset the router to factory defaults.
    To reset your router to factory defaults, use the following procedure:
    1) Power down all computers, the router, and the modem, and unplug them from the wall.
    2) Disconnect all wires from the router.
    3) Power up the router and allow it to fully boot (1-2 minutes).
    4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5) Power down the router.
    6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7) Power up the router and allow it to fully boot (1-2 minutes).
    8) Power up the computer (if the computer has a wireless card, make sure it is off).
    9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
    10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank (note: a few Linksys routers have a default user name of "admin" (with no quotes)), and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.
    Message Edited by toomanydonuts on 01-21-2008 04:40 AM

  • Could someone please tell which cable to buy for my iPad 2 so that I can watch Netflix , film four, and such others on my TV via my iPad, I am getting very confused

    could you please advise me which cable to buy for my iPad 2 so that I can watch Netflix , film four, and such others on my TV via my iPad, I am getting very confused , many thanks

    You need this digital iPad adapter http://store.apple.com/us/product/MD098ZM/A and an HDMI cable.
     Cheers, Tom

  • Need help startng websphere server in eclipse for debugging porpose

    I am using Eclipse Sdk Version: 3.1.2
    IBM websphere 6.0
    JDK 1.4
    I set debug value to "true" in my application.xml
    I have a .ear file of my application deployed on the websphere appserver. Currently I can test my application in nobebug mode.
    values of environment variables are -
    JAVA_HOME - C:\DEV\IBMJDK142; C:\Program Files\Java\jre1.6.0_03
    PATH - C:\DEV\IBMJDK142\bin; C:\Program Files\IBM\WebSphere MQ\Java\lib;C:\DEV\IBMJDK142\bin;%SystemRoot%\system32;%SystemRoot%;
    I want to test the application in debug mode.
    I am using default server on websphere, which is server1.
    In Admin-console of webshere I went to
    server-->Application server-->choose server1-->Debugging Service ---->checked the checkbox "Enable service at server startup"
    Here value of my JVM debug port is 7777.
    next In Eclipse env I chose Run---->Debug....--->Remote Java Application ----> created a new application with the name of my application and set the connection properties to -
    Host - localhost
    port-7777
    Eclipse----> Windows----->Preferences---->Server----->Installed Runtime---->Add---->selected values such as -
    JRE - default JRE(JDK 1.4)
    IBM Websphere Installation Directory - C:/DEV/WebSphere/AppServer
    saved it.
    Now in debug perspective, I created a new server with selection/values such as -
    IBM--->IBM Websphere v6---->
    port - 9081
    server profile directory - C:/DEV/WebSphere/AppServer/profiles/default
    cell - GCWSNTRANode01Cell
    node - GCWSNTRANode01
    server - server1
    Next---->Added the project to configured project ----->FINISH
    Closed Eclipse to save env settings.
    Started the default server (server1)
    opened eclipse - desired project--->debug perspective ---->choose server--->Right Click----Start/Debug
    mesg "Starting ServerI BM Websphere 6 - IBM Websphere 6 failed to start"
    can some one please tell me what I am missing here.

    Need help startng websphere server in eclipse for debugging porpose
    can some one please tell me what I am missing here. Well for one, you're trying to debug a dolphin
    Edited by: redfalconf35 on Jun 19, 2008 4:50 PM

  • I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • I need help setting up an apple id for my sons phone. It seems his email address has been taken and/or we cant get the password.

    I need help setting up an apple id for my son's phone. It seems his email address has been taken and/or we cant get the password.

    Two different things
    If you forgot the password
    If you forgot your Apple ID password - Apple Support
    If the email ID you want to use is in use by someone else - then you may need a new one
    The iCloud ID's are usually unique and may be of help if you set one up

  • I need help in finding a free update for my windows 7.5 mobile

    I need help in finding a free update for my mobile 7.5 windows phone
    Message was edited by: chevycamer427

    http://www.windowsphone.com/en-us/store/app/adobe-reader/bc4f319a-9a9a-df11-a490-00237de2d b9e
    [topic moved to Windows Phone subforum]

  • I need help in activating apple id to for the find my iphone app

    i need help in activating apple id to for the find my iphone app

    What sort of help are you requesting from us, your fellow users? What exactly is the problem/issue?

  • Need help Installing Flash player 10.3 for firefox. It stops at 50%

    So I have Windows Vista Basic Home, I tried updating my Flash version in firefox because it was out of date, but everytime it start downloading it , then I get the a message that says "Error " Appliation in use."  I uninstalled it and followed all the suggestions on the websites nothing is working. I even  uninstall google chrome thinking it was the problem but I'm still having that problem so I really don't know what to do because now the only place Flash player is installed seems to be Google chrome that I had to redoawload, but everywhere else tells me that I need to install it.

    RE-RE-RE REPITO, NO ENTIENDO NADA DE INGLES, PARA ESTE IDIOMA SOY COMPLETAMENTE NULA, POR FAVOR TODOS LOS MENSAJES, NOTAS, ECT., MANDEN EN ESPAÑOL.
    Date: Thu, 29 Sep 2011 15:13:29 -0600
    From: [email protected]
    To: [email protected]
    Subject: Need help Installing Flash player 10.3 for firefox. It stops at 50%
        Re: Need help Installing Flash player 10.3 for firefox. It stops at 50%
        created by Kpiebo in Installing Flash Player - View the full discussion
    I have been at it since yesterday and it's still not working.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3945878#3945878
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3945878#3945878. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Installing Flash Player by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I need help to find the serial number for Photoshop Elements 11

    Hi! I need help to find the serial number for Photoshop Elements 11 I downloaded last year on Apple Application Store.. I have been using photoshop on mac for over a year and now need the serial number to be able to use it on macbook. I looked up Adobe's website for help but found none and noone to ask for support.. Any ideas how I can get the serial number using the App Sore bill I have?

    Please post Photoshop Elements related queries over at
    http://forums.adobe.com/community/photoshop_elements

  • Need help activating Adobe Acrobat XI PRO FOR WINDOWS?

    need help activating Adobe Acrobat XI PRO FOR WINDOWS?

    Hi jurleana15722686,
    Are you working with a subscription version or perpetual (where you bought the software outright)? Are you running into a particular problem or receiving an error message when you try to activate?
    For starters, please check out this document: https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.
    If you're still having trouble, please let us know what the exact issue is, including any error messages that you're receiving. It would also be helpful to know what version of Windows you're using.
    Best,
    Sara
    [disucssion moved to Downloading, Installing, Setting Up forum]

  • HT4623 Hi, I need help on how to update software for my ipad1, can someone help me?

    Hi, I need help on how to update software for my ipad1, can someone help me?

    The iPad 1 can not be upgraded beyond 5.1.1. If you haven't upgraded to iOS 5.1.1, see the info below.
    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved., What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved.

    What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved., What happened to the 24/7 live chat for mobile me? I need help right now. Too complex for this. Crime involved.

    Hi Tmswrite,
    Here is what you want to do to protect yourself and your device:
    Find My iPhone Basics  - Apple Support
    iCloud: Find My iPhone overview
    Here's some information on how the Activation Lock protects you:
    Find My iPhone Activation Lock in iOS 7
    Sorry for your troubles. Hope it turns out OK for you!
    GB

Maybe you are looking for

  • ThinkPad Yoga won't connect to external display

    I just received a ThinkPad Yoga and have not been able to get output to external display. I am using mini hdmi to display port. Lenovo tech support was completely useless. Does anyone have experience with this issue? Thanks

  • [Partially SOLVED] Wiimote buttons work, motion does not...

    Followed all the tutorials on the wiki and the wiimote is recognized just fine... all the buttons seem to work (terminal shows output when I press dpad, A, B, +, -, home, 1 and 2) but I am not getting any motion out of moving it in the air.  I have a

  • Ship to address on delivery different than sales order

    Hi Experts, Please help, I have a sales order with a Ship to" address in NY but when i created a delvery shipping address on delivery paperwork printed a different "Ship to" address (NJ address). I checked delivery header data and under "partner func

  • Videographer membership with Photoshop, Premiere, After Effects and Media Encoder

    Hi, I love Adobe's applications as much as a carpenter loves his toolbox, but I cannot justify the monthly cost of a toolbox full of stuff while I only use half of it. My question is simple: could you please consider making more gradually selected me

  • Hang on dragging window which is initializing in Openbox

    Hi guys, Has anyone else experienced this problem? If I open a window in Openbox and then drag the window whilst the program within is still loading up fully I get a complete system hang. Window and mouse are frozen and only Alt+SysRq REISUB will get