Need Help on writing Update Routines

Hi BW Experts,
I have a requirement to display data from Header and item datasource.From item datasource, i need to pull only 0MATERIAL.The Common fields for this datasource is service order number. I just want to pull 0MATERIAL from item datasource.So i am planning to write a routine to lookup the data from item datasource. But i have a small query on writing the Code.
Suppose if i write the code in Update Rules for header datsource and pulling the data for (LOOKUP of 0MATERIAL) 0material from Item datasource.Seems for One Service Order there are 5 to 6 materials. While writing the routine, how can i pull 5 materials to header datasource.
In Update rules, we are moving to RESULT. How can i pull 5 materials.
Can u pls help on this with the sample Code.
Thanks
Jelina

Hi
Re: Flat file extraction
Re: how to look up master data in update rule
Hope it helps

Similar Messages

Need help in writing data from JSP to excel

Hi ,
I need help in writing the data from JSP to excel.I somehow able to retrieve the data into excel but unable to get the required format.
For eg: The amount should be displayed in 0.00 format .when i am exporting it to excel it is displaying as 0 :( .
I am using the following code in JSP.
"out.print(amt + '\t');"
Would like to know if there is any otherway where in i can get my requirement.
Thanks
Tom

Hi,
Try using format part of the JSTL tag libs.
Syntax :
<%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %>
<fmt:formatNumber value="40" pattern="$#,##0.00"/>
I need help in writing the data from JSP to excel.I
somehow able to retrieve the data into excelHow do u convert the jsp to excel?
One way to convert the jsp page to excel, is to render it as an excel appl instead of html. Set the content type of the response to application/ms-excel.
response.setContentType("application/ms-excel")Hope this Helps....

Need help for writing extract program

hi
i need help for writing extract program to retriew data from legacy system.
i already developed bdc programs for me31k and me21.
my requirement is to write extract program s for those t.codes.
to retriew data from legacy system and stored in flat file.

i need help with a java program. it is a program that allows the user to enter a student's GPA, number of extracurricular activities, and number of service activities. The user can not enter a gpa above 4.0 or below 0. The user can not enter a negative number for the number of both activities. If the student meets the following criteria: 1) GPA of 3.8 or above and at least one extracurricular activity and one service activity, 2) GPA below 3.8 but at least 3.4 and a total of at least three extracurricular and service activities, 3) GPA below 3.4 but at least 3.0 and at least two extracurricular activities and three service activities, the message "Scholarship candidate" should display. If the student does not meet the criteria above, then the message"not a candidate" should display. Can you help me, please?
You haven't posted ANY 'java program' for us to help with.
The forum is NOT a coding service. It is to help you with YOUR code.
Post the code you have written and SHOW us (don't just tell us) how you compile it and execute it and the results you get. Then we can help you with any problems you are are having.
If you need help understanding just what the program should be doing you need to ask your instructor to clarify the assignment.

I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

I need help! I updated the new 6.1.3 last night. Since that time my phone will not charge. The phone is plugged in and shows as charging but the battery still drains. What can I do? I need help!

Restore iPhone with iTunes on your computer.

New update on my iTunes 8.2 computer. Sync my iPads on the computer missing playlist on my computer ??? Need help. Worst update ever

new update on my iTunes 8.2 computer. Sync my iPads on the computer missing playlist on my computer ??? Need help. Worst update ever

Hello there, dancingteacher.
Removing and re-installing iTunes can be a challenging endeavor and has to be done in a very particular way. The following Knowledge Base article provides a clear, step-by-step process of removing iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
The "Additional Troubleshooting" section also includes a link to updates and conflicts with software for your Windows Operating System as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Need Help in writing a UDF

Hi,
Please help in writing a UDF for these fields in mapping, which I need for the object Iu2019m doing currently.
The fields are like this:
1)         batch_no = "TRUNC((GetMaxObjid('x_txn_sap_parts')-POWER(2,28))/5000)+1",
2)         lot_id = "TRUNC((GetMaxObjid('x_txn_sap_parts')-POWER(2,28))/500)+1",
3)        How to use JDBC connection factory class in the UDF.
Some logic I can provide which I know i.e. Power (2, 28) means 2 to the power of 28 (2 multiplied 28 times), Trunc means truncate, X_TXN_SAP_Parts is a database table.The Target fields are Batch_no, lot_id & Objid.Actually, objid is mapped initially to a source field i.e. Object ID and in this function it is only being used for the calculation of the batch_no.
Thanks in Advance,
Sreedhar.

Hi,
Following with my query I've tried to use this code but still I'm unable to execute the mapping.
import java.util.*;
import com.sap.aii.mapping.lookup.*;
import com.sap.aii.mapping.lookup.*;
DataBaseAccessor accessor = null;
DataBaseResult JDBCOutPayload = null;
String BusinessSystem="clarify_dev_bizsys";
//give your business system having channel name
String CommunicationChannel="JDBC_TO_CDEV";
//give your channel name
String InputPayload= " select X_TXN_PRE_SITE_XFACE.nextval from dual;";
//give your sql query
try {
Channel channel =
LookupService.getChannel(BusinessSystem,CommunicationChannel);
accessor = LookupService.getDataBaseAccessor(channel);
DataBaseResult resultSet = accessor.execute(InputPayload);
     for(Iterator rows = resultSet.getRows();rows.hasNext();){
     Map rowMap = (Map)rows.next();
     Object cValue = rowMap.get("batchno");
//field name of field required , as in database
      catch (Exception e) {}
      finally {
              if (accessor != null)
              accessor.close();
       result.addValue((String)cValue);
--> I don't know what are the parameters to be used and how to be used in the UDF because this is the first time I'm writing a UDF.
--> The problem in using this query is that both OBJID & BatchNo. are on the target side and the value for the OBJID is retrieved by a SELECT query from the database.
Kindly help me how to resolve this query of mine.
Thanks in Advance.
Sreedhar.

Need help in writing a vbscript

Hi,
I need help in wring a vbscript. I have serached for the vbscript on the net, but could not find any.
I need to add a file to an msi using vbscript. - That's the requirement.
For this I have done the following with the help of vbscript.
1. With the insert statement I inserted a new copmonent in the FeatureComponent Table.
2. Now the next thing I did is, I inserted a new row in the File table using insert statement again. The file is uncompressed.
3. Since the file is a non-version file I also added a row in the MSIFileHash table.
4. Also, now added the Component in the component table.
After doing this I am able to see the chnages in the mst, however whrn I try to install it I get an error 2725 (Invalid database tables).
Can somebody please post a vbscript which can add a file to an msi?

Hi All,
Thanks for all your responses.
Yes, It is not so easy. I never said it was. Thanks for pointing out Orca. We use Orca on a daily basis.
What exactly I am looking at, is this.
We have some standard applications which needs to be repackaged every month. The repackaging process is same and does not change at least for these packages. So I was actually looking at automating these things.
What I did so far.
First we have created an object for Windows installer. I have then taken a copy of the original msi and then opened the database of this temporary msi database in transact mode. Once the database is opened we can use select, insert, update
and delete statements to update the database.
I could successfully add a registry to the msi. The component was also added successfully to the component table. I also could make changes to the Property table.
The tricky part comes with the addition of file to the file table.
The addition of file requires the following steps.
1. Add a new row to the file table. This can be done with the Insert statement.
2. We then need to associate the file to a new component or any other component already existing in the msi. In my case I am creating a new component.
3. We then have to associate this components to a feature in the FeatureComponents table.
4. Since the file I am adding is a non-versioned file, a new row also has to be added to the MSIFILEHASH table.
I could see the changes that I have done using the mst. But when I try to install the msi with the mst, I get the error 2725. I checked everything. All the other steps except for the file addition works fine.
To check whether I am indeed right, I have did this.
Skipped the file addition part to the msi. Every other change that I make works and I am able to install the msi with the mst successfully.
For obvious security reasons I will not be able to share the vbscript with you. If you guys think, that this is not a right forum for this question, please let me know the right forum. I have been stuck with this issue from the past 6 months. Any help would
really be appreciated.

Need help for QCI ASTM routines

Hello Friends,
Presently I am setting up the QCI config in our test server. I have configured the necessary settings for the Conversion group and the reading group. Now when I am testing the results using the O3QCITEST transaction, I am getting an error message that "Quantity Conversion Interface: No response from external programs"
In the help of this error message it is suggested to run report ROIB_QCI_CALL_TEST (T-code O3D2) to test the communication with external routines. When I checked it is actually getting failed, so can anybody suggest where I need to check for these routines.
What do I need to check with the BASIS guys in order to ensure that these routines are available and QCI calculations are happening?
thanks,
Ritesh

Ritesh
Assuming that you are using API - C routine for QCI.
Please let me know if you are using ASTM(old version) or ASTM_2004 (latest version) ?
In case you are using old command, i.e. astm
Please check at operating system level, following command ;
ASTM <table1> <density> <temp>
for ex: ASTM tab24b 0.000642 15.5
This should provide you result at Operating system level. Only then you can expect O3QCITEST to provide result.
Let me know.
Regards
Nilesh Thakkar

Need helping in writing query for finding percentage of duration

Can any one please help in writing query for this.
The table is like this :-
ID     Region     Month     Duration
I1 R1     Jan     80
I2     R2     Jan     70
I3     R1     Jan     70
I4     R3     Jan     40
I5     R1     Feb     80
I6     R2     Feb     30
I7     R3     Mar     100
I want to write a query to find
% of duration for each and every region against each and every month.
Please help in solving this query. I am in urgent need of this.
Thanks in advance.

I also have to do in MS Access 2003You also have to ask into an other forum since here it's an Oracle forum, to try to find Oracle solution.
Nicolas.

I need help, I cant updat my blackberry curve 8520

I nee d help, I cant updat my blackberry curve 8520 everytime i go here in blackberry site and check for update my phone it says try again.. and no updates for your software, how is that? I have v4.6 please help meee

You do, for sure, have your BB data plan active and are able to get email, etc.?
That is required for updating to OS 5.0.
If the OS you downloaded is not specifically for the carrier that is branded on the device you will need to install the OS to the computer and then when you're done, delete the vendor.xml file located in c:\program files\common files\research in motion\apploader.
Then after you delete that, in that same apploader folder, is a file called Loader.exe. Double click that to install the OS to your device.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Need help in writing a vbs script

I am very new to scripting and need help in scripting the following:
When the Windows 7 machine boots up or a user logs on (easy to do with GPO), I want to execute a script that starts some services
ONLY if the length of the computer name is less than or equal to 15 else it should exit. It has to be done in the background without any user interaction.
The script should be able to work for both x86 and x64 version of Win7.
Any help would be greatly appreciated.
Thanks in advance.
JD
JD

Hi,
I highly recommend that you skip VBScript and learn PowerShell instead. This is pretty trivial in PowerShell:
If ($env:COMPUTERNAME.Length -le 15) {
# Do stuff
# HINT: Look into Start-Service
Write-Host "Under limit: $env:COMPUTERNAME"
} Else {
# Do optional stuff
Write-Host "Over limit: $env:COMPUTERNAME"
(OT: jrv - happy? =])
If you must stick with VBScript for some odd reason, here's an example to get you started:
Set wshNetwork = WScript.CreateObject( "WScript.Network" )
strComputerName = wshNetwork.ComputerName
If Len(strComputerName) <= 15 Then
'Do stuff here when the name is short enough
WScript.Echo "Under limit: " & strComputerName
Else
'Do stuff here when the name is too long (only if you want to)
WScript.Echo "Over limit: " & strComputerName
End If
http://www.activexperts.com/activmonitor/windowsmanagement/adminscripts/services/
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing)

Windows 8.1 need help with Windows Updates and Start menu Or fix my old Windows Xp system

My beloved windows Xp has gave up after many years of working well. It stopped working a few days ago after a lightening strike.
I got this Windows 8.1 computer a few month ago but it seems to have a problem. I stopped using it after could not get start menu to work and when back to my Windows XP system.
First problem is the start menu is not there. I tried installing something and it says it will take control or something and screen goes black. I clicked canceled quickly in order not to get a virus.
Where is the start menu?
Second problem, Windows updates does not want to update because it needs Windows 8.1 update. This computer is already Windows 8.1. There I canceled it since it was mostly a virus. Now updates are not working.
If those can not be fixed, how can i fix my Windows Xp to get it back. It does not turn on, I press button and nothing happens. Is this something easy to fix?

Another user discovers that Windows 8.1 is not at all of what it should be.
There is no Start Menu in Windows 8 or 8.1. However, you can restore your desktop start menu with a very good freeware application:
Classic Shell
Windows Update comes with Windows 8.1. There is nothing special you have to do.
It kind of sounds like you've been a bit too quick to download and run whatever you find on the Internet. You should always research any software you're considering downloading/installing ahead of time. Google it. See what others say
about it. Ask on forums. In order to use Windows effectively and safely you need to expand your knowledge and become a more sophisticated user.
If you think your new system has become infected, you might want to consider Refreshing or Resetting it to a clean state, or at least visiting one of the anti-malware forums and getting some advice on cleaning it up. But beware, a lot
of "blind leading the blind" happens on forums. Always try to read between the lines, and question what people say.
You could consider leaving XP behind. Its time has come and gone, and pretty much any newer version of Windows can actually give you better service than XP - once you get it tuned up.
It's possible to make Windows 8.1 more functional than XP and about as functional as Windows 7, but it takes a fair bit of effort in reconfiguration and installation of some well-known 3rd party applications that are good (which, unfortunately, most
on the internet are not).
Good luck to you.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Need help with writing a rule

Need help with some rules. I want to book a number to a specific Entity at a Specific Custom 4 only. I don't want this formula to work at all C4 levels. How can this be done?
for example if Entity is "XBM1123" and we use C4 for tracking and the tracking level I want to book it to is IMPORT, how can this be done for a specific account 4400221
I have my formula as
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
If HS.Entity.Member = "XBM1123" or HS.Custom4.Member = "IMPORT" then
HS.EXP "A#4400221= A#4521111 + A#3526644 + A#635210"
End If
End if
this did not work. I got hte following error
Calculate started.<BR>Error executing VBScript Microsoft VBScript runtime
error, Line 259:Object doesn't support this property or method:
'HS.Custom4.Member'.<BR>Calculate finished.<BR>Error executing
VBScript %0.
I then changed it to the below and it still did not work
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
If HS.Entity.Member = "XBM1123" then
HS.EXP "A#4400221.C4#IMPORT= A#4521111 + A#3526644 + A#635210"
End If
End if
error
Invalid Custom1 member
specified for this function.
Invalid Destination specified for this function:
A#4400221.C4#IMPORT.

You are close.
Try:
If pov_value = "<Entity Currency>" or pov_value = "<Entity Curr Adjs>" Then
    If HS.Entity.Member = "XBM1123" then
       HS.EXP "A#4400221.C4#IMPORT= A#4521111.C4#IMPORT + A#3526644.C4#IMPORT + A#635210.C4#IMPORT"
    End If
End if
or replace IMPORT with with Top_C4 or what ever member you need to copy to C4#IMPORT.
Rule of thumb, to be on the safe side and for most simple calcs, is if you mention a dimension on the left side, you need to define it on the right side as well.

Need help in writing NVARCHAR2 column to an excel sheet

Hi All,
I have a NVARCHAR2 column in my table. I want to store the data present in the column into an excel file. When i write the data to an excel file the data is getting converted to some other form. It's not in human readable form.
Language is not fixed for the column.
I need help in storing the NVARCHAR2 data into an excel file without any implicit conversion done by the oracle.
Please help.
Thanks,
Girish G
Edited by: Girish G on Jul 14, 2011 2:02 AM

Export data to BLOB (csv)

Need help with writing a query with dynamic FROM clause

Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'Simply sticking the later query in the first query does not work.
Any pointers will be appreciated.
Thanks
rogers42

Hi,
rogers42 wrote:
Hi Folks,
I need help with an query that should generate the "FROM" clause dynamically.
My main query is as follows
select DT_SKEY, count(*)
from *???*
where DT_SKEY between 20110601 and 20110719
group by DT_SKEY
having count(*) = 0
order by 1; The "from" clause of the above query should be generated as below
select 'Schema_Name'||'.'||TABLE_NAME
from dba_tables
where OWNER = 'Schema_Name'
Remember that anything inside quotes is case-sensitive. Is the owner really "Schema_Name" with a capital S and a capital N, and 8 lower-case letters?
Simply sticking the later query in the first query does not work.Right; the table name must be given when you compile the query. It's not an expression that you can generate in the query itself.
Any pointers will be appreciated.In SQL*Plus, you can do something like the query bleow.
Say you want to count the rows in scott.emp, but you're not certain that the name is emp; it could be emp_2011 or emp_august, or anything else that starts with e. (And the name could change every day, so you can't just look it up now and hard-code it in a query that you want to run in the future.)
Typically, how dynamic SQL works is that some code (such as a preliminary query) gets some of the information you need to write the query first, and you use that information in a SQL statement that is compiled and run after that. For example:
-- Preliminary Query:
COLUMN     my_table_name_col     NEW_VALUE my_table_name
SELECT     table_name     AS my_table_name_col
FROM     all_tables
WHERE     owner          = 'SCOTT'
AND     table_name     LIKE 'E%';
-- Main Query:
SELECT     COUNT (*)     AS cnt
FROM     scott.&my_table_name
;This assumes that the preliminary query will find exactly one row; that is, it assumes that SCOTT has exactly one table whose name starts with E. Could you have 0 tables in the schema, or more than 1? If so, what results would you want? Give a concrete example, preferably suing commonly available tables (like those in the SCOTT schema) so that the poepl who want to help you can re-create the problem and test their ideas.
Edited by: Frank Kulash on Aug 11, 2011 2:30 PM

Need Help on writing Update Routines

Similar Messages

Maybe you are looking for