Need help opening a few files on InDesign (plugin help)

Trying to open up some files from flash drive on InDesign, it says "the document uses one or more plug-ins which are not currently available on this system" and then says "Cannot open...Please upgrade your plugins to latest version or upgrade to newest Adobe InDesign" Any help? Thank

Hello,
You might find your answer here.
InDesign
P.

Similar Messages

I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

You'll need to update to at least ACR 8.2 for the 70D to be recognized. The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
Are you using PSE 11 and not 12? PSE 11's maximum ACR version is 8.0.

Need help opening a pdf file

How can I get help opening a pdf file? I have been asking for help for over an hour now, I need this file, it is password protected,
and I have set a new password, with still no help, still can't get the file to open, just what do I need to do, it is my 2011 tax return,and
I need to have it. I hope someone cares enough to help me with this. I am so frustrated at this point, I just don't know where to turn now.
Janet Lechner
[email address removed]

What is your operating system?
What is your Adobe Reader version?
What is the problem when trying to open that PDF document?
Who password-protected that file?

I have Photoshop CS5.5 Design Premium and need to open Nikon NEF files

I have Photoshop CS5.5 Design Premium and need to open Nikon NEF files.
I just downloaded the plug in for CS5.5 and it does not work. I put the Camera Raw.8bi file in the correct location as specifiec in the "read me" file.
Can someone guide me on how to do this, adn make it work?
Thank you.
Jay

so far no luck.
I ran DNG program for Windows (I have Win 8) and ran the menu to convert
the files on the same memory card from the camera.   Of 135 files, the
status column for the first 68 files said "converted," but the for all the
rest, it says "There was an error writing the file."
Of the files that "converted," they do not open, and I get the same error
message as before: "Could not complete your request because it is not the
right kind of document."
So, what a mess.
I get conflicting indications of the version of Photoshop I have. When i
click "About Photoshop in the Help menu, it says CS5 Extended.    The Error
message for the dng files says CS5.1 Extended. Does it make a difference?
I've been at this three hours now. It's a pain.   For many years I had no
problem with NEF files, as I had installed the plug-in as required. This
time it is not working. So I am not new to this.
Jay

How can I open quarkxpress 8 files with indesign?

Hi, prior to purchasing CC a sales person whom I spoke with using online chat confirmed that InDesign would open QuarkXpress files and a plugin was already in the application.
I can't open any quark files from InDesign. Can this be done without purchasing a third party plug-in?
Thanks in advance

InDesign can natively open Quark 4.x and 3.x files only. To open anything
later you’ll need a copy of Q2ID from Markzware.

Can I open a psd file in InDesign, if so how?

Can I open a psd file in InDesign, if so how?

You can Place a PSD in ID. You cannot open a PSD in ID.

INDESIGN CS5 V. 7.0.4: Can't Open a .jpg file in InDesign made with InDesign (It's Grayed Out)

I do have this problem with placing jpegs in InDesign. Very specifically, I can’t place or relink to a jpeg that was made by InDesign (export page > jpg), although I can drag and drop it into the file, and it shows up correctly. I can place or relink to a jpeg made by Photoshop.

ok, sorry... I'm novice.. I have reposted the answer in correct forum and added basics infomrations.... INDESIGN CS5 V. 7.0.4: Can’t Open a .jpg file in InDesign made with InDesign (It’s Grayed Out)
How I can stop/delete this discussion?

How do you open a cs7 file in indesign cc?

How do you open a cs7 file in indesign cc?

When you say InDesign CC, doo you mean the InDesign CC release from this year, or are you still using InDesign CS6 through a cloud subscription? There are a lot of users confused by this.
If you have CS6 through a subscription you are entitield to the new version for free and should go to creative.adobe.com and download the newest version of the Creative Cloud Desktop Application and get the new versions of the applictions you use.

I need assistance opening a zip file.

I need assistance opening a zip file. Please advise or assist.
Thanks,
TIGER FRANK

Hi TIGER FRANK
Please download winzip from below link and install it to open .zip files ...
http://www.winzip.com/downwz.htm

Need Help Opening a Corrupted File in MS Office Word 2007.

I use Microsoft Office Word 2007. I need help in opening a corrupted file. I tried to open but am getting messages: "cannot be opened", "unreadable content", "do you want to recover contents?" "Do you want to search
for a converter?"
Anyone have any ideas on how I can get this file to open? :/
Thank you,
Chuck in California

From Microsoft Documentation:-
If a file has been damaged and you cannot open it by normal means, you may be able to recover its content by using the Open and Repair
feature.
Click the
Microsoft Office Button
Browse to the file that you want to recover, and click it (do not double-click it).
Click the arrow next to the
Open button, and then click Open and Repair.
You might also like to look at this (which is just a longer version of what's above):-
http://support.microsoft.com/kb/893672?wa=wsignin1.0

Need help opening Unix Executable Files

I've recently been given the task of updating various files containing instruction manuals. However, the person who created these files is long gone and no one seems to know what program they were created in. All I know is that they are listed as "Unix Executable File" when I click on the document. I've tried opening them in TextEdit and this does me no good. Does anyone know how I can determine what program these files were originally created in so that I can open them?

Files that have no filename extensions (used by Windows and OS X, but not by OS 9) and have lost their Type and Creator codes (used by OS 9, but not by Windows or OS X), and are then written to a DOS-formatted disc by OS 9 and copied back to a Mac disc, are usually if not always misidentified by the OS X Finder as Unix executables.
Your company's old files, created in applications that ran in OS 9, probably have never had any filename extensions. Their Type and Creator codes have evidently been lost; those are what OS 9 uses to link the files to the applications that created them. If the files have also been written by OS 9 to any disk or flash drive formatted for Windows, i.e. FAT16 or FAT32, they have also lost their resource forks. The resource fork is a portion of a Mac file that has no analogous structure in a PC file. When a Mac file that contains data in its resource fork is written by OS 9 to a PC-formatted storage device, there's no place in the Windows file structure for that data — so it is simply discarded. When the Mac file is later copied back onto a Mac-formatted storage device, its resource fork is gone along with whatever data it contained, and the file may for all practical purposes be destroyed. OS X handles writing Mac files to Windows-formatted drives more gracefully, but passing files back and forth between OS 9 and OS X via a Windows-formatted storage device is asking for trouble.
I don't know just what practices have been used in moving these files from the Macs they were created on to the one you're trying to open them on now, but I suspect there has been some unwitting demolition in the process.
If copies of these files are still stored on the old Mac on which they were created, and that Mac still works, get on it and double-click the saved copies of the files to open them in the program(s) that created them, and make notes of which application opens each of the files. Be aware that the folder structure containing the files may have to be preserved exactly as it is for the files to open properly — do not reorganize anything. It may be essential, for example, for a PageMaker file to be kept in the same folder as all the individual files that have been "placed" in it using the Place command in PageMaker. If any of those files are moved elsewhere, they may be missing from the PageMaker document when it opens. I've never used Quark or Freehand, so I don't know whether they have the same requirement, or other requirements that are less than obvious.
Any of the old manuals that you're able to open in their original applications can be saved as PDF files using an invaluable OS 9-based "printer driver" called PrintToPDF. They can then be opened in Adobe Reader or Preview on your G5 running OS X, though you won't be able to edit them easily. If you require the ability to edit these files on the G5, rather than on the old computer using the apps that originally created them, you will need first to discover which OS 9-based application created each one, and then ascertain what if any current OS X-based application is able to open the file format used by that old application. In the case of PageMaker files, that will probably be Adobe InDesign or nothing. InDesign may also open old Quark files; I don't know. Aldus or Adobe Freehand files may be openable using Adobe Illustrator. These are just guesses.
Dragging and dropping the files onto MS Word or TextWrangler may reveal, buried somewhere in them, the name of the application(s) that created them. I know a PageMaker file, opened as plain text, will always contain the word "PageMaker". As for other file formats, I'm not sure.
Message was edited by: eww
Message was edited by: eww

Need help opening old Appleworks file

Hi all I have been searching the forums and seem to come up with well lets say I'm screwed,,,I am trying to help out my uncle who had a mac back in the day and had made some what appears to be some appleworks documents that I cant open,the documents are on floppies which I was able to pull some pictures off and convert them to .jpeg's but I cant open the other files,,,I have tried OpenOffice and Office for Macs but no luck,,,can anyone help with this or tell me how to do this,,I'm not real good with Macs seeing i've been only using one for 6mths ,,,,

You could use AppleWorks 6 in OS X or AppleWorks 5 in Classic to open the files. You could try eBay and do a search for "AppleWorks" or "Apple Works" (some people put a "space" in the name). Hardcore Mac sells AppleWorks 6.2.4.
If there are just a few files (less than 10), you can e-mail them to me & I will convert them (to text, Word, Excel, PDF) & send them back.

Help Needed in opening a HTML File from swing application

Hi,
I am opening a HTML file in Internet Explorer from my swing application.
I am using the code given below
private final static String WIN_FLAG = "url.dll,FileProtocolHandler";
private final static String WIN_PATH = "rundll32";
String cmd = WIN_PATH + " " + WIN_FLAG + " " + url;
// url is HTML file Path
Process p = Runtime.getRuntime().exec( cmd );
The HTML file is opening up,but it always opens behind the swing application,that makes me every time to maximize the HTML file after it being opened up.
I want to open it in front of the Swing Application.
Any Help Please ?
- Manikandan

Check your Application's JFrame properties (may be ur Frame is set to be in top position ,always),and also check running your application in some other OS.

Need help opening an old file

I have some files that go back to a database application called Microsoft File which has long since stopped being supported by Microsoft. Is there a utility that might be able to open these old files?

I think this is a database app that ran under system 8.

Pages 5 in Mavericks no longer opens Text files?- need to open old Clarisworks files

My 90 year old uncle clung to ClarisWorks, Appleworks far too long
He still has Claris Works documents he needs to open.Some so old that even AppleWorks version 6x, the final version of AppleWorks could not open!)
In Mountain Lion, he could open the older Clarisworks- Appleworks documents in TextEdit , save as .TXT file and then open that file in Pages
Tonight, after installing OS 10.9 ( Mavericks)he finds this work around unrelable : Sometimes the new Pages cannot open the .TXT message
How do I help him convert his old documents?
( he saved names and addresses in to Claris Works documents instead of entering into his Contacts/Address Book so now he is panicky to retrieve the addresses as he starts working on his holiday greeting and gift mailings)

Will the old Pages run under Maverick?
IF so that will be something to try
Old Pages did not open up the old Clarisworks docs but Pages 09 DID respond when we changed the extension of the CW documents to "TXT".
So , Uncle can try using Pages 09
We also can try Libre
I can install Text Wrangler- there was some advice that it will open the old CW files.
My concern is that Uncle IS 90years of age. He is remarkable using a Mac but he needs, wants everything to be straightforward and resists, cannot handle any process requiring too many steps
The need to use an intermediary translation system (CW->TXT->Pages) is stressful for him.
Such a shame that Apple did not program a translator to open the files made by its previous proprietary software (ClarisWorks and Appleworks)
Thanks all

Need help opening a few files on InDesign (plugin help)

Similar Messages

Maybe you are looking for