Need help opening oooooooooold clarisworks files

Im helping an elderly man open his diseased wife's files that were in Clarisworks (2)? He has an old Performa 575 (yeah--I know...). I have a older version I went to install but the 3rd floppy gives me a read/write data error. I cant complete the install.
What Performa 575 app will open old CW's files? I tried installing Appleworks and no-go. This is pre PPC times here...
Does Apple have a d/l for old Clarisworks 2?
Thanks. This would make an old man's day to see his wife's old teaching files...
Steve

Steve Woron wrote:
Appleworks does NOT work or even install in a Non-PPC Mac.
Considering Steve's original post, I suspect he's referring to Pre-PPC Macs rather than the Post-PPC (intel) Macs.
The Performa 575/LC 575 used the 68LC040 processor, the last of the 68000 series. The PPC Performas had 4 digit model numbers.
Considering the dates of manufacture of the 575 (1994-1996), the bundled software likely included ClarisWorks 2 or CW3. I know that we had AppleWorks 5 on the ones that were still around in 2004.
Claris change the file formats between versions 2 and 3 or between 3 and 4, and a separate free translator app was available at that time to allow moving files between versions (in either direction).

Similar Messages

  • Need help opening a pdf file

    How can I get help opening a pdf file?  I have been asking for help for over an hour now, I need this file, it is password protected,
    and I have set a new password, with still no help, still can't get the file to open, just what do I need to do, it is my 2011 tax return,and
    I need to have it. I hope someone cares enough to help me with this. I am so frustrated at this point, I just don't know where to turn now.
    Janet Lechner
    [email address removed]

    What is your operating system?
    What is your Adobe Reader version?
    What is the problem when trying to open that PDF document?
    Who password-protected that file?

  • Pages 5 in Mavericks no longer opens Text files?- need to open old Clarisworks files

    My 90 year old uncle clung to ClarisWorks, Appleworks far too long
    He still has Claris Works documents he needs to open.Some so old that even AppleWorks version  6x, the final version of AppleWorks could not open!)
    In Mountain Lion, he could open the older Clarisworks- Appleworks documents in TextEdit  , save as  .TXT file and then open that file in Pages
    Tonight, after installing OS 10.9  ( Mavericks)he finds this work around unrelable : Sometimes the new Pages cannot open the .TXT message
    How do  I help him convert his old documents?
    ( he saved  names and addresses in to Claris Works documents instead of entering into his Contacts/Address Book so now he is panicky to retrieve the addresses as he starts working on his holiday greeting and gift mailings)

    Will the old Pages run under Maverick?
    IF so that will be something to try
    Old Pages did not open up the old Clarisworks docs but Pages 09 DID respond when we changed the extension of the CW documents to "TXT".
    So , Uncle can try using Pages 09
    We also can try Libre
    I can install Text Wrangler- there was some advice that it will open the old CW files.
    My concern is that Uncle IS 90years of age. He is remarkable using a Mac but he needs, wants everything to be straightforward and resists, cannot handle any process requiring too many steps
    The need to use an intermediary translation system (CW->TXT->Pages) is stressful for him.
    Such a shame that Apple did not program a translator to open the files made by its previous proprietary software (ClarisWorks and Appleworks)
    Thanks all

  • Need Help Opening a Corrupted File in MS Office Word 2007.

    I use Microsoft Office Word 2007. I need help in opening a corrupted file. I tried to open but am getting messages: "cannot be opened", "unreadable content", "do you want to recover contents?" "Do you want to search
    for a converter?"
    Anyone have any ideas on how I can get this file to open? :/
    Thank you,
    Chuck in California

    From Microsoft Documentation:-
    If a file has been damaged and you cannot open it by normal means, you may be able to recover its content by using the Open and Repair
    feature.
    Click the
    Microsoft Office Button
    Browse to the file that you want to recover, and click it (do not double-click it).
    Click the arrow next to the
    Open button, and then click Open and Repair.
    You might also like to look at this (which is just a longer version of what's above):-
    http://support.microsoft.com/kb/893672?wa=wsignin1.0 

  • Need help opening Unix Executable Files

    I've recently been given the task of updating various files containing instruction manuals. However, the person who created these files is long gone and no one seems to know what program they were created in. All I know is that they are listed as "Unix Executable File" when I click on the document. I've tried opening them in TextEdit and this does me no good. Does anyone know how I can determine what program these files were originally created in so that I can open them?

    Files that have no filename extensions (used by Windows and OS X, but not by OS 9) and have lost their Type and Creator codes (used by OS 9, but not by Windows or OS X), and are then written to a DOS-formatted disc by OS 9 and copied back to a Mac disc, are usually if not always misidentified by the OS X Finder as Unix executables.
    Your company's old files, created in applications that ran in OS 9, probably have never had any filename extensions. Their Type and Creator codes have evidently been lost; those are what OS 9 uses to link the files to the applications that created them. If the files have also been written by OS 9 to any disk or flash drive formatted for Windows, i.e. FAT16 or FAT32, they have also lost their resource forks. The resource fork is a portion of a Mac file that has no analogous structure in a PC file. When a Mac file that contains data in its resource fork is written by OS 9 to a PC-formatted storage device, there's no place in the Windows file structure for that data — so it is simply discarded. When the Mac file is later copied back onto a Mac-formatted storage device, its resource fork is gone along with whatever data it contained, and the file may for all practical purposes be destroyed. OS X handles writing Mac files to Windows-formatted drives more gracefully, but passing files back and forth between OS 9 and OS X via a Windows-formatted storage device is asking for trouble.
    I don't know just what practices have been used in moving these files from the Macs they were created on to the one you're trying to open them on now, but I suspect there has been some unwitting demolition in the process.
    If copies of these files are still stored on the old Mac on which they were created, and that Mac still works, get on it and double-click the saved copies of the files to open them in the program(s) that created them, and make notes of which application opens each of the files. Be aware that the folder structure containing the files may have to be preserved exactly as it is for the files to open properly — do not reorganize anything. It may be essential, for example, for a PageMaker file to be kept in the same folder as all the individual files that have been "placed" in it using the Place command in PageMaker. If any of those files are moved elsewhere, they may be missing from the PageMaker document when it opens. I've never used Quark or Freehand, so I don't know whether they have the same requirement, or other requirements that are less than obvious.
    Any of the old manuals that you're able to open in their original applications can be saved as PDF files using an invaluable OS 9-based "printer driver" called PrintToPDF. They can then be opened in Adobe Reader or Preview on your G5 running OS X, though you won't be able to edit them easily. If you require the ability to edit these files on the G5, rather than on the old computer using the apps that originally created them, you will need first to discover which OS 9-based application created each one, and then ascertain what if any current OS X-based application is able to open the file format used by that old application. In the case of PageMaker files, that will probably be Adobe InDesign or nothing. InDesign may also open old Quark files; I don't know. Aldus or Adobe Freehand files may be openable using Adobe Illustrator. These are just guesses.
    Dragging and dropping the files onto MS Word or TextWrangler may reveal, buried somewhere in them, the name of the application(s) that created them. I know a PageMaker file, opened as plain text, will always contain the word "PageMaker". As for other file formats, I'm not sure.
    Message was edited by: eww
    Message was edited by: eww

  • Need help opening old Appleworks file

    Hi all I have been searching the forums and seem to come up with well lets say I'm screwed,,,I am trying to help out my uncle who had a mac back in the day and had made some what appears to be some appleworks documents that I cant open,the documents are on floppies which I was able to pull some pictures off and convert them to .jpeg's but I cant open the other files,,,I have tried OpenOffice and Office for Macs but no luck,,,can anyone help with this or tell me how to do this,,I'm not real good with Macs seeing i've been only using one for 6mths ,,,,

    You could use AppleWorks 6 in OS X or AppleWorks 5 in Classic to open the files. You could try eBay and do a search for "AppleWorks" or "Apple Works" (some people put a "space" in the name). Hardcore Mac sells AppleWorks 6.2.4.
    If there are just a few files (less than 10), you can e-mail them to me & I will convert them (to text, Word, Excel, PDF) & send them back.

  • Need help opening a few files on InDesign (plugin help)

    Trying to open up some files from flash drive on InDesign, it says "the document uses one or more plug-ins which are not currently available on this system" and then says "Cannot open...Please upgrade your plugins to latest version or upgrade to newest Adobe InDesign" Any help? Thank

    Hello,
    You might find your answer here.
    InDesign
    P.

  • Need help opening an old file

    I have some files that go back to a database application called Microsoft File which has long since stopped being supported by Microsoft. Is there a utility that might be able to open these old files?

    I think this is a database app that ran under system 8.

  • NEED HELP OPENING SAVED ADOBE FILE

    I had some important info saved on a disc (an adobe reader file).  I hadn't tried opening it in a while but when I try opening it it says something about a file i/o error.  Is there a solution or is the info lost?  I don't know if it has anything to do with the different laptops because I remember being able to view it on my old laptop.  Please help!

    petey*ray wrote:
    I TRIED TO SAVE IT TO THE HARD DRIVE AND OPEN IT BUT IT WOULD NOT EVEN SAVE IT. THERE WAS ANOTHER ERROR MESSAGE.  BUT THANK YOU SO MUCH.  WHAT CAUSES A CORRUPT FILE?
    If you couldn't save it to your drive then it's probably a corrupt disk rather than a corrupt file.
    As far as causes for corrupt files, there can be many causes. The disk could be corrupt because it wasn't formatted correctly (and your OS won't read it), it could be scratched, just a plain old bad disk (I test all of mine before sending them to anyone)...etc. Again, many reasons it could be bad.
    Unfortunately, it sounds like you won't be able to save your file.

  • I have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can

    i have a canon 70d and just purchased elements 12. It will not open a raw file for me. I have been advised to download the latest version of camera raw, i have done this and it still says my camera is not supported. I really need to open my raw files. Can anybody help me.

    You'll need to update to at least ACR 8.2 for the 70D to be recognized.  The normal way to update PSE12 to the latest CR is to use Help / Updates in the Editor which should update to ACR 8.5.
    According to Adobe's website PSE12 shipped with ACR 8.1 and you say it says yours is reported as ACR 8.0.
    Are you using PSE 11 and not 12?  PSE 11's maximum ACR version is 8.0.

  • I have Photoshop CS5.5 Design Premium and need to open Nikon NEF files

    I have Photoshop CS5.5 Design Premium and need to open Nikon NEF files.
    I just downloaded the plug in for CS5.5 and it does not work. I put the Camera Raw.8bi file in the correct location as specifiec in the "read me" file.
    Can someone guide me on how to do this, adn make it work?
    Thank you.
    Jay

    so far no luck.
    I ran DNG program for Windows (I have Win 8) and ran the menu to convert
    the files on the same memory card from the camera.   Of 135 files, the
    status column for the first 68 files said "converted," but the for all the
    rest, it says "There was an error writing the file."
    Of the files that "converted," they do not open, and I get the same error
    message as before: "Could not complete your request because it is not the
    right kind of document."
    So, what a mess.
    I get conflicting indications of the version of Photoshop I have. When i
    click "About Photoshop in the Help menu, it says CS5 Extended.    The Error
    message for the dng files says CS5.1 Extended.  Does it make a difference?
    I've been at this three hours now.  It's a pain.   For many years I had no
    problem with NEF files, as I had installed the plug-in as required. This
    time it is not working. So I am not new to this.
    Jay

  • Need help opening new software application Adobe Elements 12 on my new MAC. HELP?

    Need help opening new software application Adobe Elements 12 on my new MAC. HELP?

    Is it installed? If so, go to Applications and choose either Adobe Elements 12 Organizer, or Adobe Photoshop Elements 12>Support Files>Photoshop Elements Editor.

  • I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

    I need help with a PDF file that is an image, the "Read Out Loud' option does not work, please help!

    You mean an image such as a scanned document?
    If that is the case, the file doesn't contain any text for Reader Out Loud to read. In order to fix that, you would need an application such as Adobe Acrobat that does Optical Character Recognition to convert the images to actual text.
    You can also try to export the file as a Word document or something else using ExportPDF which I believe offers OCR and is cheaper than Acrobat.

  • Need help in laoding flat file data, which has \r at the end of a string

    Hi There,
    Need help in loading flat file data, which has \r at the end of a string.
    I have a flat file with three columns. In the data, at the end of second column it has \r. So because of this the control is going to the beginning of next line. And the rest of the line is loading into the next line.
    Can someone pls help me to remove escape character \r from the data?
    thanks,
    rag

    Have you looked into the sed linux command? here are some details:
    When working with txt files or with the shell in general it is sometimes necessary to replace certain chars in existing files. In that cases sed can come in handy:
    1     sed -i 's/foo/bar/g' FILENAME
    The -i option makes sure that the changes are saved in the new file – in case you are not sure that sed will work as you expect it you should use it without the option but provide an output filename. The s is for search, the foo is the pattern you are searching the file for, bar is the replacement string and the g flag makes sure that all hits on each line are replaced, not just the first one.
    If you have to replace special characters like a dot or a comma, they have to be entered with a backslash to make clear that you mean the chars, not some control command:
    1     sed -i 's/./,/g' *txt
    Sed should be available on every standard installation of any distribution. At lesat on Fedora it is even required by core system parts like udev.
    If this helps, mark as correct or helpful.

  • I need help opening up the pdf doc that i just saved. i need to open it up with excel?

    I need help opening up the pdf doc that i just saved. i need to open it up with excel?

    Yes, I need help configuring the settings.
       Re: I need help opening up the pdf doc that i just saved. i need to
    open it up with excel?  created by David Kastendick<http://forums.adobe.com/people/dave_m_k>in
    Adobe ExportPDF - View the full discussion<http://forums.adobe.com/message/4711293#4711293

Maybe you are looking for