Need Help - Oracle Application

Hi I am new to this forum. We have V890 server with Oracle 10g installed. We have a plan to create more instance in oracle DB. But the issue is Disk space.So we planned to add more disks in server.can anyone please help me, how to add new partitions in existing installed ORACLE DB.

When you install Oracle9iAS, you get the wireless component (Oracle9iAS Wireless). It provides the ability to expose applications to any mobile device (including voice) with only writing the application once. There is a mobile XML defined by Oracle9iAS Wireless that should be used. You can think of the mobile XML as HTML, but for mobile devices. There are a few walkthroughs to get you started: http://otn.oracle.com/tech/wireless/tutorials/content.html
Also, you may want to go to the Oracle Applications forum to get their opinion.
Regards,
Kalle
[email protected]

Similar Messages

I purchased Creative Cloud through the Employee Purchase program. Had to reimage system. Need help reinstalling application. I have "redemption" code, but get error saying it has already been redeemed. Please advise.

I purchased Creative Cloud through the Employee Purchase program. Had to reimage system. Need help reinstalling application. I have "redemption" code, but get error saying it has already been redeemed. Can you please advise how I go about getting my software reinstalled? If I was given the serial number when I redeemed, I don't have any record of it.
Thank you,
Starla

Hi Starla Mehaffey,
I would suggest you to sign in with your Adobe ID during installation and your product will automatically recognize your membership details.
Refer this Link for any further assistance:- Redemption Code Help
Hope that helps,
Regards,
Rahul Tyagi

I need display oracle application on mobile

hi
i need display oracle application on mobile
what Issue from java shall i need
or What are the requirements to dis play it
thanks.......

I believe that depends pretty-much on the OS on that mobile.
iOS, Windows Mobile, Android, Symbyan...
They are quite different. And that means you need a different Java machine for each different OS.
And that definitely is not a Oracle Forms development topic.
So far, I've never heard of Oracle Forms Applet run on any kind of mobile phone.

Need free Oracle Applications 11i technical Tutorials

Hi All,
I've been learning Oracle Application (technical) and need some pointers from you regarding Technical Tutorials.
I've gone through some of the basic tutorials of Oracle Applications and now looking for websites/resources for techical tutorials which can be practiced on Oracle 11i Demo( vision) instance.
Please let me know the resources/pdfs/links where these concepts are explained in a sequential manner as I'm already confused with what to read and what not to read after surfing the net. At the same time, some of the tutorials I found on internet are for Functional training and this created further confusion as I couldn't distinguish between functional & Technical material.
It is not my intend to get hold of every thing, but want to have a fair understanding of Apps & an opportunity to explore/learn other things when I work on projects. So, looking for a course material of 30 - 80 hrs. duration. ( Am I too selective? :) )
Last but not least, I don't have Metalink account and hence need resouces which are free of cost.
Request you all to help me and find me the right resources!
Many Thanks,
MK

Hi,
Please see old threads for similar discussion (I assume you are referring to Oracle Apps Database Administration when you say Oracle Apps Technical).
How to become Apps DBA
http://forums.oracle.com/forums/search.jspa?threadID=&q=How+to+become+Apps+DBA&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Also, see the 11i/R12 documentation (you need to cover the manuals in the sections mentioned below)
Applications Releases 11i and 12 -- Applications Technology (Lifecycle Management + System Administration + Architecture and Common Applications + Integration)
http://www.oracle.com/technetwork/documentation/applications-167706.html
Google should be your friend, search for Oracle Apps DBA blogs and tutorials and you should find many links that would be helpful.
Oracle Apps DBA Tutorial
http://tinyurl.com/24j3jb9
Oracle Apps DBA Blogs
http://tinyurl.com/2987na8
Thanks,
Hussein

Need help -- Oracle Financial 11i vs r12 (Oracle Payable and Oracl Payment)

Dear all
I'm newbie in Oracle Application and request for your help to answer my questions.
Background:
Three years ago, my company was planning to implement ERP Oracle Financials.
To facilitate the plan, an open bidding was established to find the best implementing company with affordable price.
The bidding document was created when Oracle Financials was 11i.
When the contract was signed 2 years ago, by my company and the winning company, it is mentioned that the version installed must be the latest one.
At the response to requirements, the winning company stated that the payment activity will be facilitated by Oracle Payable.
Now, the project is going on and the Oracle has the r.12 version.
Problem:
At 11i, there was only one module related to payment activities, i.e. Oracle Payable.
At r.12, Oracle has a new modul, i.e. Oracle Payment, which was subdomain of Oracle Payable.
Question:
1. Is my opinion about the relationship between Oracle Payable and Oracle Payment above correct?
2. Does my company has its right to ask for Oracle Payment in the installation?
3. If the answer to number 2 is yes, what is the base for it?
Thank you for explanation.
Sorry if I raise a too-simple question.
Regards,
Dodydh
Edited by: 840286 on 28-Feb-2011 03:28

Hi Dodydh,
I am afraid, your statement 'At r.12, Oracle has a new modul, i.e. Oracle Payment, which was subdomain of Oracle Payable.' is not correct.
Oracle Payments is an upgrade version of Oracle iPayments of 11i and this module is expected to serve Self service modules. But Payment Batches which is part of Oracle Payables has been moved to Oracle Payments.
You can very well ask them to implement Payment Batches (Processes relating to Funds Disbursement) but not the entire module.
Please let me know if you require further info.
Regards,
Sridhar

Need Help! Application Deployment wont work

hi, i need help, currently having windows 2008r2 with sccm 2012r2.
The deployment for application for some e.g. adobe reader, firefox is working.
but when we try to deploy a application it is not installing. we tried manually run it from ccmcache with the same command line in the sccm and it works.
The application is pushed to the cache folder. But it just wont get installed. Any1 can help? Really urgent need to solve this.
Thanks
I tried the parameter with setup.exe /s /f1xxx.iss
tried with -s -fixxx.iss also same thing...
but when i manually run the command it work....

As Torsten mentioned, check AppEnforce.log from the %windir%\ccm\Logs -folder on the client that doesn't get the software installed.
What are you using as your detection method for the application that fails? Have you tried using
psexec -s cmd (included in the Sysinternals Suite, Google/Bing it) to open a command prompt with SYSTEM account and run the installation command from there? You should always test your application installation commands with SYSTEM account before implementing
them to ConfigMgr, this way you'll make sure that the command works.

Help- oracle application library

Hello friends,
May I get oracle applicaiton library (help) on cd. I want to download on my pc.

Hi;
In EBS 11i application form window, The help menu oracle application library browser is not
displaying the help details. Could any one please give any solution for this?Did you try wiht different machine and also different browser?
Please check below notes
Click On Help Returns "TOPIC NOT FOUND" [ID 972429.1]
Ihelp Not Working [ID 842225.1]
Regard
Helios

Need HELP :: Oracle 10g for Windows 7 Professional 64bit

I am trying to install Oracle 10g for my Laptop (Windows 7 64bit)and i am getting error message: ERROR Starting Database Control.
Here are last few lines from emconfig.log file ---
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
******** **** Certificate was added to keystore
Certificate reply was installed in keystore
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_NCI-01874908-L.nci.nih.gov_ORA10G\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">

<default-web-app application="default" name="defaultWebApp"/>
<web-app application="default" name="dms0" root="/dms0"/>
<web-app application="default" name="dms" root="/dmsoc4j"/>
<web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />

<access-log path="../log/http-web-access.log"/>

<ssl-config needs-client-auth="false" keystore="C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_NCI-01874908-L.nci.nih.gov_ORA10G/config/server/keystore.test" keystore-password="FE7337F1A5D238357C9C6819AFC4F812" />
</web-site>
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleORA10G
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ORA10G\emConfig.log for more details.
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
at java.lang.Thread.run(Thread.java:595)

Pl identify which exact version of 10g is being installed.
Only 10.2.0.5 is supported/certified. The install steps are here - http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
MOS Doc 1222603.1 (Enterprise Manager Database Control Configuration - Recovering From Errors Due to CA Expiry on Oracle Database 10.2.0.4 or 10.2.0.5 [Video]) may be relevant
HTH
Srini

I need HELP onFacebook Application ...

I'm using a blackberry Bold 9000 with OS 4.6.
My problem is that recently i upgraded my Facebook Application from the Default to Version 1.9 and now I keep getting a message saying ' you are currently on a service plan that does not support this application' where as I have been using it smoothly on the default version prior to the update.
Can someone please help me to revert back to the previous version of Facebook (Sorry i cant remember the version)
Thanks in advance
Regards
Ifham

Whichever schema you installed the tables you have to make sure that the htmldb user has access to the tables via Oracle database GRANT command

Need Help | Oracle UCM 11g | Creation of new layout

Hi All,
This is regarding the problem we are facing to create a new layout and skin. We followed all the steps that were needed to create a new layout/skin but still we are getting errors after deploying the component. Since there were major changes in 11g, we are not able to proceed with debugging as well. (part of the reason being code clean-up is not done properly and we are going to wrong files while debugging.)
Having said, I need your help/advice in solving my problem. Below are the problems I am facing once I deploy the component.
1) Even though I am mentioning that skin.css and layout.js should be published from “publish/resources…” folder, different skin.css and layout.css files were getting deployed. Not sure from where the content server is picking those files from. I am placing the skin.css and layout.css from TopMenus/Trays to continue my testing.
<tr>
<td>publish/resources/layouts/NBNTrays/layout.js</td>
<td>resources/layouts/NBNTrays/layout.js</td>
<td>TRAYS_LAYOUT_JS</td>
<td>javascript:layout:NBNTrays</td>
<td>60</td>
<td><$if isLayoutEnabled("NBNTrays") and (not DisableNBNTraysPublishing)$><$doPublish = 1$><$endif$></td>
</tr>
2) After the component gets deployed and we publish all static files, I am able to change the layout/skin to my custom layout/skin. Top menus is working fine, but in Trays layout I am not able to see the left navigation.
3) Though I am saying to copy all the images from resources/trays folder, component is copying only some subset of images from the corresponding folders.
<tr>
<td>resources/layouts/Top Menus/Oracle</td>
<td>resources/layouts/NBNTopMenus/NBNSkin</td>
<td>resources:layout:NBNTopMenus</td>
<td>70</td>
<td><$if isLayoutEnabled("NBNTopMenus") and (not DisableNBNSkinSkinPublishing) and (not DisableNBNTopMenusPublishing)$><$doPublish = 1$><$endif$></td>
<td>1</td>
</tr>
Can you please tell me how can we associate new layout.js and skin.css to the new layout/skin.
Please note that all the above problems were coming in 11g.
Thanks in advance,
Regards:
Veera

Hi All,
This is regarding the problem we are facing to create a new layout and skin. We followed all the steps that were needed to create a new layout/skin but still we are getting errors after deploying the component. Since there were major changes in 11g, we are not able to proceed with debugging as well. (part of the reason being code clean-up is not done properly and we are going to wrong files while debugging.)
Having said, I need your help/advice in solving my problem. Below are the problems I am facing once I deploy the component.
1) Even though I am mentioning that skin.css and layout.js should be published from “publish/resources…” folder, different skin.css and layout.css files were getting deployed. Not sure from where the content server is picking those files from. I am placing the skin.css and layout.css from TopMenus/Trays to continue my testing.
<tr>
<td>publish/resources/layouts/NBNTrays/layout.js</td>
<td>resources/layouts/NBNTrays/layout.js</td>
<td>TRAYS_LAYOUT_JS</td>
<td>javascript:layout:NBNTrays</td>
<td>60</td>
<td><$if isLayoutEnabled("NBNTrays") and (not DisableNBNTraysPublishing)$><$doPublish = 1$><$endif$></td>
</tr>
2) After the component gets deployed and we publish all static files, I am able to change the layout/skin to my custom layout/skin. Top menus is working fine, but in Trays layout I am not able to see the left navigation.
3) Though I am saying to copy all the images from resources/trays folder, component is copying only some subset of images from the corresponding folders.
<tr>
<td>resources/layouts/Top Menus/Oracle</td>
<td>resources/layouts/NBNTopMenus/NBNSkin</td>
<td>resources:layout:NBNTopMenus</td>
<td>70</td>
<td><$if isLayoutEnabled("NBNTopMenus") and (not DisableNBNSkinSkinPublishing) and (not DisableNBNTopMenusPublishing)$><$doPublish = 1$><$endif$></td>
<td>1</td>
</tr>
Can you please tell me how can we associate new layout.js and skin.css to the new layout/skin.
Please note that all the above problems were coming in 11g.
Thanks in advance,
Regards:
Veera

Error message "VI is not executable"! Need help with Application Builder

Hello,
I have a problem with an application, built with the Application Builder. I have read some threads about the problem I have, but I still don't know a solution.
When I run my front panel from LabVIEW, everything is good. So, now I created an application (and an installer) to be able to run it on other PCs as well. This application does not work. Everytime I start it on my PC, I get the error "VI is not executable. ...". I read in several forums solutions for this error, but I cannot fix it! I've changed my properties for the builder, but with no success. Perhaps, anybody has more ideas, what's the problem.
To get a better idea from my project, here a little description of it:
In the block diagram there is a while loop which is continuously runned. In this loop I only set some properties for the layout of the front panel, such as decorations which will be hidden/shown and changes of colours of indicators... For the rest, it waits for a click on the button "Start" in the front panel. After that, a DLL is called to communicate with a USB device. Some measurements are carried out and the DLL is closed. I hope, you can get a global idea from my block diagram...
I use LabVIEW 8.5, the DLL is a third-party DLL, which we wrote on our own. But I think the DLL works properly, if it is called from a C# application it works and it works, too, by calling it from LabVIEW when I am in development mode.
It's a project for university and I'm just a beginner in LabVIEW, so I don't have so much experiences in it, but I think i improved my knowlegde about LabVIEW very well in the last weeks!
So, i hope to get an answer soon (the deadline for the project is not soooo far away )
If you need more information, please let it know...
I would be very grateful if there is someone with a working solution...
Kind regards from the Netherlands,
Sebastian

Sebastian,
Your architecture makes it very difficult to debug this and other problems. Does the error message mention which VI is causing the problem? It is very important to wire your error clusters everywhere. In LabVIEW, when a node throws an error (Error.Status = T), future nodes do not execute. At the end, place an error cluster indicator that you can see on your front panel. When an error posts, you can right click the indicator (even in a compiled application) and select "Explain Error".
This is a start, but you really need to push this into a queued-state machine before this gets any more complicated. As it were, if anything in your loop hangs, your whole application hangs. See attached for a queued-message handler (not advisable for actual applications, but you get the point. You would want to have a type defined enum in lieu of strings, and shared data between states differently, etc.)
-Jason
Message Edited by LabBEAN on 01-20-2009 08:36 AM
Certified LabVIEW Architect
Wait for Flag / Set Flag
Separate Views from Implementation for Strict Type Defs
Attachments:
State Machine.vi ‏18 KB

Need help Oracle 8.1.5

i've a delphi program that uses oracle8.1.5 version. ppl use it were working on windows NT and they wanted to use XP. On windowsXP, oracle8.1.5 is not working properly. Everytime i start windows, i run following to start oracle 8.1.5 database:
start svrmgrl;
connect as internal/oracle;
startup database
I can do this on my computer. But some of users don't want to do this everytime windowsxp is restarted, some don't know how to do that.
I tried Oracle9i and later versions, but the program was throwing exception. Please help me to solve this problem. Maybe it can be solved by using startup batch file, or anyway

The Oracle components used in the delphi program don't support later oracle versions. That's why i'am not thinking of to use 10g, 11g.
for this, i defined all possible ways to let my users use winXP.
1. just add startup batch - it's a bad way. users will see cmd windows for 20-30 secs everytime start windows;
2. upgrade delphi components. - the program code is not written by me. It's so hard to change it
Oh, got a new way! To force my users continue using windowsNT kk
Thanks all! later i will write back how i'll had solved it
http://neu2st.blogspot.com

Need Help - Mail Application Folder Issues

I have 2 mail accounts. One is an exchange account, another is a standard hosted mail service with IMAP interface.
Both are setup as IMAP (Exchange option didn't show all folders, so I had to use IMAP for Exchange.)
The mail application just plain doesn't work for any folder management, on either account.
If I move messages, it's not moved on the server. If I send a message, it isn't stored in the Sent folders.
Most of the time, it doesn't put the mail anywhere. When I send mail messages, it creates a Sent items folder under the drafts folder.
The IMAP prefixes are correct, and I can see all folders. The Folder behaviors are set to the proper server side folders.
I've restored, rebooted, etc.
Any other suggestions?

There are no synchronize options on the PC mail apps, they are live clients. Outlook for work, OWA for my personal account.
This problem is happening with two accounts. One personal exchange, and one externally hosted (not exchange, actually webmail.us) for our company.
I am the Senior Software Architect/Engineer for the IT department and I have spoken with webmail.us as well as our infrastructure group and am very familiar with Exchange.
All issues and troubleshooting steps so far point to the need to troubleshoot the client application itself on the iPhone, especially since other IMAP clients have no issue using the exact same settings.
As a matter of fact, everything works 100% fine from the OSX mail client using IMAP for the exact same accounts with the exact same settings on my MacBook ultimate.
It makes a copy of a moved message in the proper folder, and leaves the original in the inbox. This is how the iPhone client should work, right?
Message was edited by: bitslap47

Moving to CF10, Need help with Application.cfc

I've been googling about how to work with Application.cfc since last week but I still have some questions and I can't find the answers.
My application is under the root (in unix) and there are many subfolders underneath it. Each sub-folder is hosting a different web application.
From what I read, I can create 1 root Application.cfc and then on subsequent sub-folder, when I need to have another Application.cfc on that level, I can create ProxyApplication (see below) and then create a sub-folder level Applicatin.cfc
So, when I set an application.DSN on my root Application.cfc, using proxyApplication I don't have to reset this dsn again in my sub folder level Application.cfc
Since my loginform.cfm and loginaction.cfm is right under root directory too, I also set OnsessionStart in the root Application.cfc to handle user login. Then this means, I don't have to reset session variable again anywhere because session.username, etc has been set on the highest level.
Is this correct?
In addition, Am I correct when I do the following:
1. Since I have root level and sub-folder level Application.cfc, I should set this.name with a different name, am I right?
    On the root Application.cfc I set this.name = "StudentServices" because this represent the global application
    On the sub-folder level's Application.cfc, I set this.name to "StudentServices_stdLoad" becaus this sub-folder only handle student load application.
2. On the root Application.cfc, I set the DSN to the application scope. So on the sub-folder level Application.cfc I can check if a particular db is working or not
    because as awhole, in the global sense, this web application uses more than one Databases. Each sub-folder may use a database that is dfferent than the other sub folder.
Am I doing the right thing? Please advice
Below is example of what I have, Thank you!
I created a root Application.cfc under the root directory:
<CFCOMPONENT displayname="Application" output="true" hint="My Root Application component">
       <cfset THIS.Name = "StudentServices" />    <cfset THIS.ApplicationTimeout = CreateTimeSpan(0,0,30,0) />    <cfset THIS.SessionManagement = true />    <cfset THIS.SetClientCookies = false />
       <cffunction name="OnApplicationStart" access="public" returntype="boolean" output="false">
   <cfset application.MainDSN = "DSN1">
   <cfset application.ReportDSN = "DSN2">
   <cfreturn true/>
</cffunction>
<cffunction name="onApplicationEnd" output="false">
     <cfargument name="applicationScope" required="true"> </cffunction>
<cffunction name="onSessionEnd">
</CFCOMPONENT>
Then, in this root directory I also created a ProxyApplication:

<cfcomponent name="ApplicationProxy" extends="AdvancementServices.Application">
</cfcomponent>
Then in the Sub-Directory, I can create a sub-folder level Application.cfc extending the root Application.cfc:
<CFCOMPONENT displayname="Application" extends="ApplicationProxy">
    
    <cfset THIS.Name = "StudentServices_stdLoad"/>
    <cfset THIS.ApplicationTimeout = CreateTimeSpan(0,0,30,0) />
    <cfset THIS.SessionManagement = true/>
    <cfset THIS.SetClientCookies = false/>
    <cffunction name="OnApplicationStart" access="public" returntype="boolean" output="false">
       
       <cftry>
       <cfquery name="TestMain_DSN" datasource="#application.MainDSN#" maxrows="2">
         SELECT Count(*)          FROM MyTable
       </cfquery>
         
        <cfcatch type="database">
          <cflog file="#this.name#" type="error" text="Main DSN is not available. message: #cfcatch.message# Detail: #cfcatch.detail# Native Error: #cfcatch.NativeErrorCode#" >
         <cfthrow message="This application encountered an error when connecting to the Main Database. Please contact support." />
         <cfreturn false>
       </cfcatch>
     </cftry>
     <cflog file="#this.name#" type="Information" text="Application #this.name# Started">
     <cfreturn true/>
   </cffunction>
</CFCOMPONENT>
    <cfargument name = "SessionScope" required=true/>     <cfargument name = "AppScope" required=true/>
</cffunction>
<cffunction name="OnSessionStart" access="public" returntype="void" output="false">
<CFSET session.UserGroup = ""/>
<CFSET session.UserName = ""/>
<CFSET session.currentPage = ""/>
<CFSET session.loggedin = "No"/>
<CFSET session.userrights = ""/>
<cfreturn/>
</cffunction>

OK. It sounds to me like you really shouldn't be using a single root Application.cfc at all, if all you want to do is share some settings between your "sub-applications". I would look at storing the common settings in an external file that all of the applications can read in. The simplest way is to put the settings in a .CFM file somwhere outside of the web root (so it is not directly web accessible) and load it with <cfinclude> tag into the OnApplicationStart() method of each sub-application's App.cfc. That .CFM file can be as simple as:
<cfset application.myCustomSetting = "blahblah">
<cfset application.myOtherSetting = "foo">
Alternatively, you can look at using a config file like this Ray Camden blog post suggests, and use the GetProfileSection(), GetProfileString(), and SetProfileString() functions as needed within OnApplicationStart(). You could even put ALL of your settings in
A third option is to store your settings in an XML file or in JSON format in a text file. You could then write code to read in the XML file, and use something like xml2struct.cfc to convert the XML into a struct, then append the struct to your application scope. If you go the JSON route, then just read in the JSON file and use DeserializeJSON() to convert it into a struct, and append it to the application scope.
What I think is probably the best approach is to use a community-supported MVC framework like FW/1 or ColdBox (maybe you already are, I don't think you've said so though). One of the many advantages to doing so is that they have built-in "environment" support that can be used to configure common settings, depending on your environment (dev/qa/production). You would handle reading in your external settings through the "environment" mechanism.
One other thing to think about: your login mechanism. I think you want to use one set of login tools that is shared by all of the "sub-applications". You can do this also by putting the login/authentication-related code somewhere outside the webroot of your applications, and then either set up a mapping to that location in CF Admin, or set an application-specific mapping in your various App.cfc files. That way all the "sub-applications" share a common set of code for the login process. I don't know how your login process works (do all users go to the same login page then get redirected into their relevant "sub-application", or does each "sub-application" have a discrete login page that utilizes common back-end processes to authenticate and redirect), so you'll have to judge how that is best accomplished.
Hopefully this gives you some useful ideas.
-Carl V.

I need help with applications in Mac OS x not opening

Recently, Applications in OS X haven't been opening correctly, and some browsers arent opening and even crashing.
I think it started when I installed DivX, but I uninstalled it and it's still not working.
When I try and open an application, I get a notification like this:
Please help!

Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.

Need Help - Oracle Application

Similar Messages

Maybe you are looking for