Need help placing photo image in laptop screen of a video...

I have footage that is both zooming and panning, and need a photo image to fit within the laptop screen space during the duration of the pan/zoom. Should I use "Track Motion" accompanied with key-framing in 2D? Does this make sense? Is there an easier way to achieve this, or is that the way to go?
Here is a rough take of the clip of which I speak. In reality, we will be placing the same image on both the HDTV and the laptop in the shot. Hopefully, this will make what I have said above a little more clear. Hope you can help. Thanks much.

If you have CS4 then I would recommend using Mocha for AE (a planar tracking software from imagineers system that comes bundled with AE CS4). It's basically designed for the kinds of stuff you described. There are some helpfull tutorials on the imagineer systems's website:
http://www.imagineersystems.com/support/mocha-AE/tutorials/

Similar Messages

I need help removing bezel from my laptop screen

I have a HP Pavilion DV4-1125nr laptop and I cracked the screen and need to change it but I can't seem to figure out on how to remove the bezel out of my screen so I can remove screen and get the model number from the back. I removed screens before but they had screws on top of bezel covered by little rubber knobs and the dv4-1125nr doesn't have any of this and it looks like you have to remove the bezel using your hands but I can only pop out the top and the sides, the bottom doesn't pop out and I'm afraid to force it out in case I break it. What am I misssing here? Is there a trick to get it out?

http://h20574.www2.hp.com/?jumpid=reg_R1002_USEN&lang=en&cc=US&hpappid=psml
From above url ( HP partner Services Media Library ), do the following;
1. Select Laptops and Teblet PCs in "Product Category"
2. Select HP Pavilion Notebook PCs in "Product Family"
3. Select Pavilion dv4-1000 Entertainment Notebook PC series in "Product Series"
4. Select either FRU Remove/Replace (AMD) or FRU Remove/Replace (Intel) based on your CPU type.
5. It should bring up another window "HP Service Media Library" and then select Display Bezel ( Recessed ) to bring up the video and detailed procedure for you to open up the LCD Display Bezel.
Have fun and keep this URL handy and you can use it for all your DIY works later.

Need help placing a like button on my site.

I have managed to put a like button on my site, but now i have the next problem. If you look on my site
http://www.dorff.nl/
You will see the facebook like buttons hanging on the left side of the page. I really want to place the button on the right side..next to the black buton with the text "mijn portfolio".
Can you tell me how can i do this?
Regards Brian

Hi Ken,
i got an other question... it looks like this one but i think i need a little push into the right direction.
On my site at this page
http://www.dorff.nl/company.html
There is only text.. Now i want to place an image next to Dorff Design
How can i do this??? The image name is Monitor...
i think i need a litlle code for css. And i need to place the image inside a div... i think?
Hope you give me a start..
Regards Brian
Date: Mon, 9 Apr 2012 06:52:15 -0600
From: [email protected]
To: [email protected]
Subject: Need help placing a like button on my site.
    Re: Need help placing a like button on my site.
    created by Ken Binney in Dreamweaver - View the full discussion
You're welcome From my hasty little tip, it looks like you ran with it and added this to your style.css .fb-like Good work guy! PS It's a handsome design.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4321953#4321953
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4321953#4321953. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I need help, I'm on a laptop acer ... I install Dreamweaver cs6 and I can not seem to do the keyboard raccoucie Quick tags Crt T function

I need help, I'm on a laptop acer ... I install Dreamweaver cs6 and I can not seem to do the keyboard raccoucie Quick tags Crt T function
Dreamweaver support forum

You posted your question 2 minutes ago.
The first thing to try is Deleting Corrupted Cache in DW. You must turn on hidden files/folders in your operating system to find them.
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CS Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Nancy O.

I need help restoring the ability to view Youtube and all videos of my 4 year old MacBook after receiviving a meaage the the Adobe ineeds to be updated? Thanks.ng

I need help restoring the ability to view Youtube and all videos of my 4 year old MacBook after receiving a message the the Adobe ineeds to be updated? Thanks.

Did you upgrade whatever product from Adobe was out of date yet?

Need help placing images on separate layers

I'm a novice to Javascript but I've been trying to learn. I have a project where i need to place muliple images from a folder onto separate layers (same page) in a template. I tried to modify "ImageCatalogue" script within InDesign to disastrous results. On another thread someone was kind enough to give me a short script "Objects to Layers" written by Kasyan Servetsky. This was very helpful but not exact to my needs so now I'm starting from scratch. I've been playing with the following code trying to get it to work. It doesn't and I'm getting frustrated. I keep changing this line but it keeps coming back as "undefined":
myImage.place(newLayer);
Can someone please point me in the right direction? Is my coding too simple? The end comments are my wish list of add-ons should I ever get these layers working.
Thanks for your help!
// script to place images on separate layers
Main();
function Main(){
          // get path to folder, ask to select which folder
          var myFolder = Folder.selectDialog("Select folder containing images");
          // use open document
          doc = app.activeDocument;
          // if folder is empty, tell user to select another folder
          if(myFolder.length == 0){
                    selectDiaglog("Folder empty, select new folder");
          else{
          // select each file in myFolder and place on new layer in active document
                    var myImage = myFolder.item;
                    newLayer = doc.layers.add(+1);
                    myImage.place(newLayer);
          alert("Done")
// rotate image 90 CCW
// place image at x-6.41, y9.9955 on page
// rename layer as filename

Hi,
Main();
function Main(){
     // get path to folder, ask to select which folder
     var myFolder = Folder.selectDialog("Select folder containing images");
     // use open document
     doc = app.activeDocument;
     // if folder is empty, exit
     if(!myFolder){
          alert("no Folder selected, I am quitting"); exit();
     // place each file in myFolder on new layer in active document
     // files are filtered by their extension
     var
          myImages = myFolder.getFiles(/\.jpg$|\.tiff$|\.pict$|\.bmp$|\.eps$|\.pdf$/i),
          len = myImages.length, currImg,
          mAngle = 270,
          mX = -6.41,
          mY = 9.9955;
          while (len-->0) {
               currImg = doc.pages[0].place(
                    myImages[len],     // current file
                    [0,0],     // initial place point
                    doc.layers.add({name: myImages[len].displayName}),          // rename layer as filename
                    false,
                    false,
                    {absoluteRotationAngle: mAngle}          // rotate image 90 CCW
                    )[0].parent;
               currImg.fit(FitOptions.FRAME_TO_CONTENT);     // fix frame to content
               currImg.move([mX,mY]);          // move image at x-6.41, y9.9955 on page
          alert("Done")
Each image in the same point placed?
Good help is served here:
http://www.jongware.com/idjshelp.html
Each object has properties and methods.
Used above: folder.getFiles(), page.place(), rectangle.fit() and rectangle.move() methods.
Jarek

Need help deleting an image field/pictures in worksheet

I am in need of help!!! Added photos in an important .pdf document (a worksheet form that was pre-made) and I added image fields (Top box photo and small bottom box for text). I need to delete some image fields now and it won't let me. I upgraded my Adobe Reader to Acrobat XI Pro trial, still can't. If I try to edit image, it says I need to have Live Cycle designer to edit this form. Someone please help! This is my son's Eagle Scout worksheet and needs to be fixed tonight....please

If the file was created in LiveCycle Designer then it can only be edited
there.
It's not clear in what way you edited it originally.

Need help putting photos on my iPad

Trying to put scanned photos on my iPad. I have tried iTunes but under devices there is no photos to select. Need help.

Photos doesn't appear on the left-hand sidebar under Devices, it appears on the right-hand side in a similar way as for selecting and syncing music, apps etc
If you are on iTunes 11 on your computer then you may want to re-enable the left-hand sidebar via View > Show Sidebar (option-command-S on a Mac, control-S on a PC), which might make it easier to navigate and my instructions may make more sense.
To sync photos, connect and select your iPad on the left-hand side of your computer's iTunes (if you've enabled the sidebar), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If you haven't enabled the sidebar, then from your library click 'iPad' at the top right of the screen and you should get a series of buttons along the top of the screen, including one for Photos

Need help uploading photos

I have been unable to upload photos from iphoto. All I get is the event titles! I need help...

Yes, it's possible to use both, but not that way. That command will make duplicates of all your iphoto images, so you don't want to do that.
For now, you have two choices.
1. Set PSE as your external editor in iphoto ( iphoto>preferences>advanced):
and send the photos from iphoto to PSE. If you set the PSE editor preferences>saving files>on first save to save over the existing file, iphoto will remember you latest edits + the original.
If you do this, be sure to choose the right file as your editor. You want this one, in Applications>Adobe Photoshop Elements 11>Support Files:
Or
2. You can export the photos from iphoto, use File>Open in the Editor, edit and save your changes and then reimport them to iphoto as new images. The advantage of this is that you can change the name and format if you want and you can save as many versions as you like. iPhoto only keeps one version--if you edit again, the new version replaces the one it was keeping.

Need help with Applet: Images

DUKESTARS HERE, YOU KNOW YOU WANNA
Hi,
I'm designing an applet for some extra credit and I need help.
This game that i have designed is called "Digit Place Game", but there is no need for me to explain the rules.
The problem is with images.
When I start the game using 'appletviewer', it goes to the main menu:
http://img243.imageshack.us/img243/946/menuhy0.png
Which is all good.
But I decided that when you hover your cursor over one of the options such as: Two-Digits or Three-Digits, that the words that are hovered on turn green.
http://img131.imageshack.us/img131/6231/select1ch3.png
So i use the mouseMoved(MouseEvent e) from awt.event;
The problem is that when i move the mouse around the applet has thick line blotches of gray/silver demonstrated below (note: these are not exact because my print screen doesn't take a picture of the blotches)
http://img395.imageshack.us/img395/4974/annoyingmt1.png
It also lags a little bit.
I have 4 images in my image folder that's in the folder of the source code
The first one has all text blue. The second one has the first option, Two-Digits green but rest blue. The third one has the second option, Three-Digits green but rest blue, etc.
this is my code
import java.applet.Applet;
import java.awt.Graphics;
import java.awt.event.*;
import java.awt.*;
public class DigitPlaceGame extends Applet implements MouseListener, MouseMotionListener {
     public boolean load = false;
     public boolean showStartUp = false;
     public boolean[] hoverButton = new boolean[3];
     Image load1;
     Image showStartUp1;
     Image showStartUp2;
     Image showStartUp3;
     Image showStartUp4;
     public void init() {
          load = true;
          this.resize(501, 501);
               try {
                    load1 = getImage(getCodeBase(), "images/load1.gif");
                    repaint();
               } catch (Exception e) {}
          load();
     public void start() {
     public void stop() {
     public void destroy() {
     public void paint(Graphics g) {
          if(load == true) {
               g.drawImage(load1, 0, 0, null, this);
          } else if(showStartUp == true) {
               if(hoverButton[0] == true) {
                    g.drawImage(showStartUp2, 0, 0, null, this);
               } else if(hoverButton[1] == true) {
                    g.drawImage(showStartUp3, 0, 0, null, this);
               } else if(hoverButton[2] == true) {
                    g.drawImage(showStartUp4, 0, 0, null, this);
               } else {
                    g.drawImage(showStartUp1, 0, 0, null, this);
                    for(int i = 0; i < 3; i++) {
                         hoverButton[i] = false;
     public void load() {
          addMouseListener(this);
          addMouseMotionListener(this);
          showStartUp1 = getImage(getCodeBase(), "images/showStartUp1.gif");
          showStartUp2 = getImage(getCodeBase(), "images/showStartUp2.gif");
          showStartUp3 = getImage(getCodeBase(), "images/showStartUp3.gif");
          showStartUp4 = getImage(getCodeBase(), "images/showStartUp4.gif");
          showStartUp();
     public void showStartUp() {
          load = false;
          showStartUp = true;
     public void mouseClicked(MouseEvent e) {
          System.out.println("test");
     public void mouseMoved(MouseEvent e) {
          int x = e.getX();
          int y = e.getY();
          if(x >= 175 && x <= 330 && y >= 200 && y <= 235) {
               hoverButton[0] = true;
               repaint();
          } else if(x >= 175 && x <= 330 && y >= 250 && y <= 280) {
               hoverButton[1] = true;
               repaint();
          } else if(x >= 175 && x <= 330 && y >= 305 && y <= 335) {
               hoverButton[2] = true;
               repaint();
          } else {
                    for(int i = 0; i < 3; i++) {
                         hoverButton[i] = false;
                    repaint();
     public void mouseEntered(MouseEvent e) {
     public void mouseExited(MouseEvent e) {
     public void mousePressed(MouseEvent e) {
     public void mouseReleased(MouseEvent e) {
     public void mouseDragged(MouseEvent e) {
}plox help me ploz, i need the extra credit for an A
can you help me demolish the lag and stop the screen from flickering? thanks!!!!!
BTW THIS IS EXTRA CREDIT NOT HOMework
DUKESTARS HERE, YOU KNOW YOU WANNA
Edited by: snoy on Nov 7, 2008 10:51 PM
Edited by: snoy on Nov 7, 2008 10:53 PM

Oh yes, I knew there could be some problem.......
Now try this:
boolean a,b,c;
if((a=(x >= 175 && x <= 330 && y >= 200 && y <= 235)) && !hoverButton[0]) {
               hoverButton[0] = true;
               repaint();
          } else if((b=(x >= 175 && x <= 330 && y >= 250 && y <= 280)) && !hoverButton[1]) {
               hoverButton[1] = true;
               repaint();
          } else if((c=(x >= 175 && x <= 330 && y >= 305 && y <= 335)) && !hoverButton[2]) {
               hoverButton[2] = true;
               repaint();
          } else if ((!a && !b && !c)&&(hoverButton[0] || hoverButton[1] || hoverButton[2]){
                    for(int i = 0; i < 3; i++) {
                         hoverButton[i] = false;
                    repaint();
          }hope it works........
Edited by: T.B.M on Nov 8, 2008 10:41 PM

I need help dividing an image into two equal parts in Adobe Illustrator CC--ASAP!!!

I need help dividing a single, already created image into 2 equal parts...Am getting nowhere so far

Hi Willi, thanks so much for responding! Below is the image I need to divide in half. The left half where it says "Click here for the definition" links to a landing page where people can read the definition of the Hebrew Word. The right half links to an audio recording of the Hebrew word being spoken aloud. I am trying to figure out how to use the scissors or knife tool in Adobe Illustrator and am having no luck. Plus I believe there's a way to include URLs on each separated part, but I can't get past figuring out how to cut it. My background is not graphic design

Please help, cannot compare images in full screen mode

I am not able to compare 2 images in full screen mode. I am using a MBP and a ACD 23". The main image will remain in the ACD while the image being compare is being shown in the MBP.
I am able to compare images in the viewer mode.
My main display is the ACD 23 which I selected using the display preferences under 'Arrangement' with the menu bar located on the ACD. In Aperture, Secondary Viewer is set to Blank.
I had also tried different combinations of Main Viewer and Secondary Viewer settings but was not successful.
Am I missing something? Anyone have the solution?Thanks in advance for any help.
norheng

Anyone have any suggestions to using Aperture to edit images using a MBP and ACD so that it best utilize Aperture full screen mode in comparing and narrowing down to the pick.
I am now trying to use the MBP as the main display and ACD as the secondary. This way I am able to compare images with the MBP in the Browser mode and the ACD display the compare images full screen. It work with the secondary display - ACD set to mirror, span and alternate mode.
It would be best if only one screen is use and hence save energy consumption (reducing global warming and bill, if it help).
Thanks in advance for any suggestions or and solutions.
norheng

Need help [JS]: select images/captions in InD, switch to Bridge and write to XMP

I've got a javascript for CS3/Tiger that I'm writing that eventually will let a user select an image and a caption in InDesign, then tells bridge to write the caption data into the image metadata. I need help - the script works in pieces, but not when put together.
It's built as an indesign script, then follows the procedure to create a script object to send to bridge. When it runs, the indesign portion works fine, but nothing happens in bridge.
The script is below, with comments.
Can someone help!? Thanks.
// This is the InDesign portion of the script, which was tested separately and is working fine. Right now, for testing purposes, the data from this portion isn't even used by the later Bridge portion but once I get the bridge part together, it will use those variables.
#target "indesign-5.0"
var myObjectList = new Array;
//Script does nothing if no documents are open or if no objects are selected.
if(app.documents.length != 0){
if(app.selection.length != 0){
for(myCounter = 0; myCounter < app.selection.length; myCounter ++){
switch(app.selection[myCounter].constructor.name){
case "TextFrame":
var myCaption = app.selection[myCounter].contents;
$.writeln(myCaption);
break;
default:
var myLink = app.selection[myCounter].graphics[0].itemLink.filePath;
$.writeln(myLink);
// here's where I create the string of the script to send to Bridge.
// the script itself is almost completely a lifted from the SnpModifyMetadta sample from the Bridge sdk
// it basically finds a certain image file and modifies the description metatata. i hardcoded the caption text and image path just for testing- eventually i would like it to use the variables from indesign.
// this script works fine as-is when run in the original Bridge scripting context.
// the method here of concatenating and sending the myScript string works fine when i use a different (smaller) script. so i can't tell why it's not working!?
var myScript = "function SnpModifyMetadata()";
myScript += "{";
myScript += " this.requiredContext = \"Needs to run in Bridge, \nwith a selection of a file, \nideally with some metadata\";";
myScript += "}";
myScript += "SnpModifyMetadata.prototype.run = function()";
myScript += "{";
myScript += " if(!this.canRun())";
myScript += " {";
myScript += " return false;";
myScript += " }";
myScript += " if( xmpLib == undefined )";
myScript += " {";
myScript += " if( Folder.fs == \"Windows\" )";
myScript += " {";
myScript += " var pathToLib = Folder.startup.fsName + \"/AdobeXMPScript.dll\";";
myScript += " }";
myScript += " else";
myScript += " {";
myScript += " var pathToLib = Folder.startup.fsName + \"/AdobeXMPScript.framework\";";
myScript += " }";
myScript += " var libfile = new File( pathToLib );";
myScript += " var xmpLib = new ExternalObject(\"lib:\" + pathToLib );";
myScript += " }";
myScript += " $.writeln(\"About to run SnpModifyXML\");";
myScript += " var thumb = new Thumbnail(Folder(\"/Macintosh HD/Users/hearstuser/Desktop/BridgeScriptImages/orion_stack copy 6.psd\"));";
myScript += " if(thumb.hasMetadata)";
myScript += " {";
myScript += " var md = thumb.synchronousMetadata;";
myScript += " var xmp = new XMPMeta(md.serialize());";
myScript += " $.writeln(\"SnpModifyXML: About to modify XMP data for \" + thumb.name);";
myScript += " $.writeln(\"XMP packet before modifications:\");";
myScript += " $.writeln(\"-------------------------------------------------\");";
myScript += " $.writeln(xmp.dumpObject());";
myScript += " xmp.deleteProperty(XMPConst.NS_XMP, \"Description\");";
myScript += " xmp.setProperty(XMPConst.NS_XMP, \"Description\", \"hoThereHeyThere\");";
myScript += " var d = new XMPDateTime(new Date());";
myScript += " d.convertToLocalTime();";
myScript += " xmp.setProperty(XMPConst.NS_XMP, \"ModifyDate\", d, XMPConst.XMPDATE);";
myScript += " $.writeln(\"XMP packet af

Recently I received an e-mail from a user asking me to remake the script I had posted here a while ago.
I rechecked my previous post and found a couple of serious mistakes. So I revised it according to what he asked. Each page in his InDesign document contains one image and one text frame with description.
At start the script checks the selection. If nothing is selected it processes all pages in the document. In case two objects are selected – it checks whether one of them text frame and the other a rectangle and if the rectangle contains an image, then it reads the contents of the text frame, replacing hard and soft returns with spaces and writes this text to the corresponding image’s description field.
In the end, it updates all links and saves the file.
The script works both on Mac and PC, assuming that CS3 installed in the default location so long as it depends on libraries:
/C/Program Files/Adobe/Adobe Bridge CS3/AdobeXMPScript.dll (on PC)
/Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/AdobeXMPScript.framework (on MAC)
So, if necessary, correct these lines.
Here is my script in case somebody is interested:
#target indesign
var myDoc = app.activeDocument;
var mySelection = app.selection;
if (mySelection.length == 0) {
    ProcessPages();
else if (mySelection.length == 1) {
    alert("One image and one textframe should be selected.");
    exit();
else if (mySelection.length == 2) {
    try {
        if (mySelection[0].constructor.name == "TextFrame" && mySelection[1].images.length == 1) {
            var myTextFrame = mySelection[0];
            var myImage = mySelection[1].images[0];
            var myCaption = ReplaceReturnWithSpace(myTextFrame.contents);
            var myPath = new File(myImage.itemLink.filePath).absoluteURI;
        else if (mySelection[1].constructor.name == "TextFrame" && mySelection[0].images.length == 1) {
            var myTextFrame = mySelection[1];
            var myImage = mySelection[0].images[0];
            var myCaption = ReplaceReturnWithSpace(myTextFrame.contents);
            var myPath = new File(myImage.itemLink.filePath).absoluteURI;
    catch(e) {
        alert("Something wrong with your selection.\nError: " + e.message);
        exit();
    CreateBridgeTalkMessage(myCaption, myPath);
else if (mySelection.length > 2) {
    alert("One image and one textframe should be selected.");
    exit();
UpdateAllOutdatedLinks();
myDoc.save();
alert("All done.");
//+++++++++++++++++++ FUNCTIONS ++++++++++++++++++++++
function CreateBridgeTalkMessage(myCaption, myPath) {
    var bt = new BridgeTalk();
    bt.target = "bridge";
    var myScript = WriteCaption.toString() + '\r';
    myScript += 'WriteCaption(\"' + myCaption + '\", \"' + myPath + '\");';
    bt.body = myScript;
    bt.send();
function WriteCaption(myCaption, myPath) {
    if( xmpLib == undefined ) {
        if( Folder.fs == "Windows") {
            var pathToLib = "/C/Program Files/Adobe/Adobe Bridge CS3/AdobeXMPScript.dll";
        else {
            var pathToLib = "/Applications/Adobe Bridge CS3/Bridge CS3.app/Contents/MacOS/AdobeXMPScript.framework";
        var libfile = new File( pathToLib );
        var xmpLib = new ExternalObject("lib:" + pathToLib );
    var thumb = new Thumbnail (File (myPath));
    if (thumb.hasMetadata) {
        var md = thumb.synchronousMetadata;
        var xmp = new XMPMeta(md.serialize());
        xmp.deleteProperty(XMPConst.NS_XMP, "Description");
        xmp.setProperty(XMPConst.NS_XMP, "Description", myCaption);
        var updatedPacket = xmp.serialize(XMPConst.SERIALIZE_OMIT_PACKET_WRAPPER | XMPConst.SERIALIZE_USE_COMPACT_FORMAT);
        thumb.metadata = new Metadata(updatedPacket);
function ProcessPages() {
    var myPages = myDoc.pages;
    for (i = 0; i < myPages.length; i++) {
        var myPage = myPages[i];
        if (myPage.textFrames.length == 1 && myPage.rectangles.length == 1) {
            if (myPage.rectangles[0].graphics.length == 1) {
            var a = myPage.rectangles[0];
                var myImage = myPage.rectangles[0].graphics[0];
                var myPath = new File(myImage.itemLink.filePath).absoluteURI;
                var myTextFrame = myPage.textFrames[0];
                var myCaption = ReplaceReturnWithSpace(myTextFrame.contents);
                CreateBridgeTalkMessage(myCaption, myPath);
function ReplaceReturnWithSpace(myString) {
    myString = myString.replace( /\n/g , " " );
    myString = myString.replace( /\r/g , " " );
    return myString;
function UpdateAllOutdatedLinks() {
    for(var myCounter = myDoc.links.length-1; myCounter >= 0; myCounter--){
        var myLink = myDoc.links[myCounter];
        if (myLink.status == LinkStatus.linkOutOfDate){
            myLink.update();
If somebody interested in developing this script further, do not hesitate to post here your feedback.
Kasyan

Need help with fixing msi gt683 laptop

Hello. I have a GT 683 R that i bought a couple of months back, i recently did a factory restore on it and afterwards i didn't have the disk to finish the process, so i started messing with the settings and everything i reset the raid to non raid and now i'm stuck on a screen that says "Reboot and Select proper Boot device or insert boot media in selected boot device and press a key".
I tried using the recovery again and it wouldn't even boot to that menu, i hit F11 to try to boot from disc but all it does is go to the reboot and select proper boot device screen.
I need a lot of help on this because i'm not really good with computers.

if you switch from AHCI or IDE, back to RAID in the BIOS (by pressing DEL when the MSI logo appears on the screen, and going to "advanced options")
does it boot into the recovered system ?
switching into/out of RAID mode, requires you to use the RAID setup screen to configure the RAID when it's installed, by pressing ctrl + i when you see the RAID screen just after the MSI logo screen on booting up each time.
as for recovery, you may have more options depending on if you break the RAID, or if you have a backup of windows 7 or a way to copy the ISO to a USB. or just put in the recovery DVD's (mine weren't too helpful)
i.e. http://forum.notebookreview.com/msi/672814-need-help-installing-ssd-gt683r-raid-0-a-2.html
switching out of RAID mode is tricky because the controller makes small changes to the HDD's so they are recognised as RAID.
typically, windows won't let you see the drive if the flag is set, but you can wipe the setting out using backup/clone software or low-level tools that bypass the normal windows settings to blank the drive.
or you can use the RAID setup screen to remove the drives from the array, which is quite a lot faster and less effort, but you will lose all the data on the drives in both situations when switching from RAID, to 2 drives.

Need Help: BBZ10 Stuck on Usb Moniter Screen Unable to Boot / Start

Hi,
I recently purchased a Balckberry Z10, while trying to transfer my data from my existing blackberry I accidently reset my device to factory setting. now it is stuck on the usb moniter screen.
I have tried reloading the phone using Link but it keeps on showing me a message: Unable to reload due to error: No Update Available.
I am using a Mac.
Need Help!

So this is the problem and the resolution is this.. But unfortunately it is not working because I keep on getting this message that no update available.

Need help placing photo image in laptop screen of a video...

Similar Messages

Maybe you are looking for