Need Help Please: Audigy2 Value conflict with onboard sound

<SPAN class=postbody>System info: Windows XP Home Edition, 2.4 GHz IntelPent4, 52MB of RAM; DDR 200(33MHz), MSI MS-6547 (645 Ultra) motherboard. I need help! Sigh...well I am trying to put in a Soundblaster Audigy2 into my computer. I am under the impression that I have to disable and remove all onboard sound b/c it conflicts with the new sound card, ?. I currently have onboard sound ( AC97 Audio Controller ). I went to add/remove programs and removed the AC97 from there. I also went to MyComputer/Properties/Hardware/DeviceManager/Sound,Video,andGameControllers/AC97AudioContoller and deleted it. st Question: Under DeviceManager/Sound,Video,GameControllers...Do I need to remove the Legacy Audio Drivers? I know that I have to delete the rest of the drivers for AC97 and out of chance would Legacy be those drivers? I am guessing no...Also, is there anything else that I have to delete for the on board sound program to be gone? 2nd Question: I went to BIOS, and since I have windows XP home edition I think that configuration is a little different from what I read(I wont bore you with that). So, where do I go to "disable" the onboard sound in BIOS for Windows XP HomeEdition? Also, I read something about making sure the "Chip" was disabled but I could be paranoid. Do I need to worry about that? If you made it through all that text I thank you dearly. I hope that I can get some help from someone b/c I know nothing. I am afraid of making the wrong choice on BIOS and messing everything up. Thank You so Much! Ross Message Edited by RossRude3 on 04-06-2005 0:48 AM

Ross,
To fully disable teh onboard audio you would need to go into the BIOS to disable the Onboard Audio chip there. The manual with your motherboard or PC should have more detail on where exactly to find this setting, as it will differ per BIOS type. Generally it should be under a heading like Integrated Peripherals, and should be marked as the Onboard Audio chip, or AC97 Audio.
Cat

Similar Messages

Audigy2 Value conflicts with DigiCell & Core Cen

I just installed an Audigy2 Value on my new home built system. I have a MSI Neo4-F motherboard with GB of ram. I had the system running clean for a week when I installed the Audigy 2. Install when smooth but then Norton come up 'OFF' and I got error messages that DigiCell and CoreCenter (two MSI programs) couldn't load. I cleared up the Norton problem by removing the Creative Media Source program. I removed and reloaded both the MSI programs, but still get the error messages. They don't auto load, but will run if started later.
This problem seems to be related to the install of Creative programs. Is there a new driver, or new process I can follow to clear this up? Thanks

I think you have done about all you can do without going to 3rd party drivers, with their inherent risks. Regarding Norton you do not need to uninstall Media Source, all you need to do is turn off mediasource GO.

Need HELP please i got problems with my HP recovery

Please help i can't do anything on my Hp ProBook 4520s dont know how too recovery it i use bios HDD Self Test and it stop on Test2 on 10% and it dont do anything. I don't have any CD. I'm not good at this but what is the boot device or how can i do it PLEASE help ME.

No one can help me i can't belive it

TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

I had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!

first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you!

Having issues with low memory that is causing some of my apps to crash, need help please !!!

Having issues with low memory that is causing some of my apps to crash, need help please !!!

Is the device actually showing low memory errors?
What is really occurring?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Has any of this been tried?

HT1212 My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps

I need help please. I have 6 apps updates shown on on the upper right corner of the app store icon. When i tried to open the apps store and go to updates, the apps that need to be updated were not appearing therefore i have no idea what those apps are so that i can update them. Please give some solutions please

isthisonetaken wrote:
I'm having this problem. It started yesterday. I have 2 updates, but when I open the App Store, they won't appear.
Do you have apps purchased with a differnt AppleID?
For example, mine shows 12 updates but only 2 show up as being available.
The others are on my daughters account.
I log out of my iTunes account and log in with hers and those updates show up.

HT4623 cant find software updates on my iphone4 model MC605J.Need help please..

cant find the sofware update on my phone model MC60J
Need help please..

What happens when you connect the iPhone to the computer you
usually sync with and use iTunes on that computer to update the
iPhone?
What version of iOS is currently on your iPhone?

I need help please-ipod mini/itunes help

Hi,I have a computer and a laptop. I would like to add my computer itunes libary to my laptop intunes libary.Both liberies are itunes7. I just cant do it. I need help please. Simple steps or someone on the phone or someone who lives in Wimbledon and could come by and help me,cheers.Conny

Check these out:
Getting Music from your iPod to your Computer 3rd party options
Using One iPod With Multiple Computers
I hope this helps!

Help please!!! with AMD 3200+

Just Purchased a brand new xp 3200+ to run on my K7N2 Delta ILSR, I had been running a 2500+, Anyway at this point the system is totally unstable at default (200) mhz fsb, It will not even last one cycle with sisoft sandra's burn in wizard and reboots just logging into the system.
However when I set it up to run bios setup defaults it's solid as a rock. But it's recognizing the processor as an xp 2500+ and running at 1.8 ghz, with the 333 mhz fsb. I originally thought this might be a ram problem, so I took out each stick and tried to run it at 3200+ one at a time, same problems all over again. tried turning off agp fast write, loosening the memory timings, every thing i can think of.
Do i need to re-install windows??? any help at all would be greatly appreciated I would hate to think i just paid all this money and have to run at 1.8 ghz
My System:
MSI K7n2 delta l ilsr
xp 3200+ barton
1.5 ghz pc 3200 ram micron technology dual channel 400mhz
slk 900a heatsink, 3000 rpm fan, 43c idle 48 load
PSU hercules 420w
windows xp professional sp 2
Bios version 7.8
seagate barracuda 120 g primary hd
maxtor 80g diamond max back up
video card nvidia geforce 5200 with 256 on board mem

As I said in the post, I tried Loosening the memory timings, to no avail, Heat is not a problem here, temps are staying in the 40's at default settings, I have a huge leaf blower fan on the processor (tornado) along with the slk 900a bios is 7.8, I am not concerned with Sisoft sandra scores at all, the only reason I ran it is to try to determine the problem by putting first the processor and then the memory, then the video under load, when I say it's unstable I mean it's rebooting when I'm trying to type this message, I tried to include as much info as possible in this post, about the system, including the part about the ram, timings i've loosened them to 11,4,4, and the cas latency to 3,
kudos to the guy who said to bump the voltage, i'm at 1.7 cpu core and it's only restarted once in the last hour so it seems to have stabalized a bit I just think it's ironic, that I went from the 2500+ to this cpu so I wouldn't have to OC to get it above 2g and now tha't what i'm having to do,,,,it has however upped the temps about 5 degrees to 48 idle, and 53 load, how high can i take the core voltage without damaging the cpu???
Help please!!! with AMD 3200+
Just Purchased a brand new xp 3200+ to run on my K7N2 Delta ILSR, I had been running a 2500+, Anyway at this point the system is totally unstable at default (200) mhz fsb, It will not even last one cycle with sisoft sandra's burn in wizard and reboots just logging into the system.
However when I set it up to run bios setup defaults it's solid as a rock. But it's recognizing the processor as an xp 2500+ and running at 1.8 ghz, with the 333 mhz fsb. I originally thought this might be a ram problem, so I took out each stick and tried to run it at 3200+ one at a time, same problems all over again. tried turning off agp fast write, loosening the memory timings, every thing i can think of.
Do i need to re-install windows??? any help at all would be greatly appreciated I would hate to think i just paid all this money and have to run at 1.8 ghz
My System:
MSI K7n2 delta l ilsr
xp 3200+ barton
1.5 ghz pc 3200 ram micron technology dual channel 400mhz
slk 900a heatsink, 3000 rpm fan, 43c idle 48 load
PSU hercules 420w
windows xp professional sp 2
Bios version 7.8
seagate barracuda 120 g primary hd
maxtor 80g diamond max back up
video card nvidia geforce 5200 with 256 on board mem

HT4946 hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.

hii, on my iphone 4s, i tried upgrading my OS and i was asked if i needed back up and i said yes, after upgrading i couldnt find any of my files, document, pictures, music and all. please i need help please.

Hi,
usually when you upgrade, it should not delete your files, but if it happens, than you should have a backup.
Unfortunately it is very common, that people don't know, what exactly is in the backup.
The question is, what files exactly you are missing? Own pictures, or taken with the device? Purchased music form the iTunes Store, or own? ....
Documents and files are mostly up to the developer of the app, if they are part of the backup, usually not and you need to transfer them before.
In the backup you will find just pictures from the Camera Rolle folder, everything else you should have on the PC, if you had it on the device.
Same then for music, you can transfer purchased music from the device, but your own works just one direction, from PC to device, from device to PC it doesn't work.
In future I recomand you to be sure how the backup works or use a 3rd party app (iExplorer) where you have a little bit more "freedome" than with iTunes.
Or you maybe just restored from the worng backup

I can not play any games on the new ipad 32 G wifi after take over to oversea , need help please

After I turn off Airplane mode and I want to play games when was downloaded before fly to oversea. I was palying all games on ipad before fly.
now when I turn on ipad and want to paly games but It can not play games on ipad.???
Anyone can fit it on setting?
Need help please.
Thank you.

OK. I am having a little bit of trouble understanding your responses, but let's start with this since you are having an issue with other apps as well.
Reboot your iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. Let the iPad start up completely and then try again.

Iphone keeps shutting off by itself...need help please!!!

Just got new 3GS as my previous one broke....had the new one for about 2days and now it keeps shutting off when ever it wants...and the big apple just appears on the screen!! When i reset the phone it will load up for about 1minute then shut off again then the big apple appears again...Need help please!!!!

i tried to reset it while connected with the USB stick into laptop.....now after it went through the whole restore process it says that the SIM is not valid for the phone!!! please need help!!

HT204380 I can't access my FaceTime and messages through my iPod touch, I need help please!!!

I can't access my FaceTime and messages through my iPod touch, I need help please!!!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
You posted in the iPad forum instead of the iPod forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Need Help Please: Audigy2 Value conflict with onboard sound

Similar Messages

Maybe you are looking for