NEED HELP PLEASE! Cant run my k7 Master at 266fsb still.
i run a K7 Master with a 1.4 thunderbird, onboard scsi, a geforce2 ti, along with 4 case fans and power supply fan, 2 scsi harddrives(7500rpm & 10,000rpm), one 80gig ide drive, scsi cd-rom, and all my usb crap so the cheap power supply was giving me problems. I then upgraded to an Enermax and it cured all of my problems except for the main problem of not being able to run at full speed, 266fsb.
It just freezes after about 30minutes of running at 266fsb. It starts to get weird trails on the mouse pointer and then after about 6 seconds it freezes...
It doesnt matter what ddr ram I try, what processor, what heatsink, or anything that I try....it still freezes.
I'm almost certain its a bad motherboard but I dont know if this is common with these boards and if it can be fixed by me or if I have to send it out to get fixed.
Thanks for any help.
-Andrew-
I've got a similar problem, I can't run my comp at its proper speed
1800+ XP
MS 6380 KT7266 pro2
2x256 DDR
G-Force 2 MX/MX400 64MB 3D
Soundblaster Live! 5.1
Seagate 20 gig baracuda 4
Cyber Drive 8x/4x/32x CDR/RW
with a 320 watt p4 support power pack (Not to sure if 320s right I think so though, i seems to work fine, the monitoring program shows steady voltage)
Luceant 56k modem
I can only get it to run at 1.1 gig - on the 100 mhz FSB setting, when I try to take it above this I get random crash's soon after start up, and sometimes it'll run for a while before it crash's, I got it to do a benchmark using both the mad onion util and SANDRA, though I had the problem sussed when I swapped the modem with my old comp, but the problem started up again the next day and I had to go back to 100 FSB.
There are definitly no temp issues, the CPU dosn't go above 45 degrees celcius(set as critical temp) and at the moment is running around 31 degrees celcius about 80 degrees farentfeit I think, I wish you americans would give up on farentheight already, its been done, move to the metric system every one else has :P
Similar Messages
-
Hi all, I need help please to run few query one after the other...
I understood I should do it with procedures? is it the simplest way?
I don't know PLSQL and it was quite difficult for me to try learn it alone.
there is a simplest way? or a good guide that able to help me?
thanks a lot,Hi,
Here's an example of a SQL*Plus script.
Use any text editor to create a file (let's call it aug_6.sql) that contains all the statements you want to execute in order, like this:
-- ***** Begin aug_6.sql *****
CREATE SEQUENCE rownum_incrementing INCREMENT BY 1 START WITH 1;
CREATE SEQUENCE increment_order_num INCREMENT BY 1 START WITH 1000;
Insert into orders_main(order_num,order_date,sapak_num,status) values (increment_order_num.nextval, sysdate, '12','new3');
Insert into orders_details(row_num,order_num,item_num,quantity) values
(rownum_incrementing.NextVal,
( select max(order_num) from orders_main) ,'14','40');
Insert into delivery_main
values (increment_del_num.nextval
,(select max(order_num) from orders_main)
, sysdate
, (select sapak_num from orders_main where order_num = ( select max(order_num) from orders_main)));
-- ***** End aug_6.sql *****Note that I made a lot of changes in what you posted, because there seemed to be a lot of mistakes. (See list below.)
Once you have saved the file, you can run it in SQL*Plus by referring to the full path name of the file:
SQL> @c:\aaa\bbb\aug_6This is very useful if you have to do the exact same thing more than once (for example, if you are going to create the same sequences and INSERT the same data in your development database, then in your test database, and finally in your production database).
Here are a few things for you to watch:
(a) "Query" means "SELECT statement". Use "SQL Statement" if you're talking about any kind of SQL command (including CREATE SEQUENCE and INSERT).
(b) Every SQL statement must end with a semicolon (;) or slash (/).
(c) Make sure single-quotes always occur in pairs.
(d) Make sure parentheses occur in pairs, every "(" followed by a ")".
(e) Don't use strings to refer to numbers, or vice cersa. For example, if the columns item_num and quantity in the table orders_dtails are NUMBERs, then give them NUMBER values (without quotes) like 14 and 40, not string values like '14' and '40'.
(f) As part of a larger statement, you can simply use
SYSDATE
instead of the scalar sub-query
(SELECT SYSDATE FROM dual) -
HT4623 cant find software updates on my iphone4 model MC605J.Need help please..
cant find the sofware update on my phone model MC60J
Need help please..What happens when you connect the iPhone to the computer you
usually sync with and use iTunes on that computer to update the
iPhone?
What version of iOS is currently on your iPhone? -
i need help please , i try to use itunes but my iPhone don't appear on itunes, i try everyting ,dowwload itunes again restart computer and iPhone,restart running device support,etc.
Windows doesn't detect iPhone: http://support.apple.com/kb/ts1538
Mac: http://support.apple.com/kb/ts1591 -
my kids enetered the wrong unlock code on my ipod touch too many times and now the screen says IPOD DISABLED connect to itunes. I have tried connecting it to itunes and I cant because the ipod is locked. need help please! any ideas? Thanks, Nick
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,
My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,
Last login: Sun Apr 22 19:11:11 on ttys000
Marlons-MacBook-Pro:~ ryanmnhs$ ls -la ~/Library/LaunchAgents
total 40
drwx------ 7 ryanmnhs staff 238 5 Nov 23:09 .
drwx------@ 48 ryanmnhs staff 1632 13 Jan 09:53 ..
-rw-r--r-- 1 ryanmnhs staff 574 24 Oct 22:29 com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
-rw-r--r-- 1 ryanmnhs staff 618 22 Oct 2011 com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.BAF380D0-E780-4E82-86BF-77 2440AB4936.plist
-rw-r--r-- 1 ryanmnhs staff 895 4 Sep 2011 [email protected].plist
-rw-r--r-- 1 ryanmnhs staff 802 21 Mar 12:56 com.facebook.videochat.ryanmnhs.plist
-rw-r--r--@ 1 ryanmnhs staff 805 6 Sep 2011 com.google.keystone.agent.plist
Marlons-MacBook-Pro:~ ryanmnhs$
,,,,,,,,THIS IS THE RESULT,, WHAT DOES THIS MEAN? HOW CAN I FIX MY PROBLEM? UP TO THIS DATE MY WORD, EXCEL AND POWERPOINT STILL DONT WORK!!!!PLEASE HELP ME, ANYONE? THANK YOU... -
I need help please-ipod mini/itunes help
Hi,I have a computer and a laptop. I would like to add my computer itunes libary to my laptop intunes libary.Both liberies are itunes7. I just cant do it. I need help please. Simple steps or someone on the phone or someone who lives in Wimbledon and could come by and help me,cheers.Conny
Check these out:
Getting Music from your iPod to your Computer 3rd party options
Using One iPod With Multiple Computers
I hope this helps! -
My Ipad is disabled by wrong password and I have tried to reset and restore a few times with no success. Now I-tunes won't even recognize the I-pad in recovery mode. I need help please.
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
How can I add a new Template to My Templates in Pages? I've read most of the discussions on the subject but it doesn't work for me. By the time I reach the Templates folder, I only see templates for Numbers and not for Pages. Need help, please. Thanks
Si vous avez utilisé la commande Save As Template depuis Pages, il y a forcément un dossier
iWork > Pages
contenant Templates > My Templates
comme il y a un dossier
iWork > Numbers
contenant Templates > My Templates
Depuis le Finder, tapez cmd + f
puis configurez la recherche comme sur cette recopie d'écran.
puis lancez la recherche.
Ainsi, vous allez trouver vos modèles personnalisés dans leur dossier.
Chez moi, il y en a une kyrielle en dehors des dossiers standards parce que je renomme wxcvb.template quasiment tous mes documents Pages et wxcvb.nmbtemplate à peu près tous mes documents Numbers.
Ainsi, quand je travaille sur un document, je ne suis pas ralenti par Autosave.
Désolé mais je ne répondrai plus avant demain.
Pour moi il est temps de dormir.
Yvan KOENIG (VALLAURIS, France) mercredi 23 janvier 2011 22:39:28
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
I am trying like **** to download itunes 10.6.3 (64 bit - Windows 7) and I keep getting "the installer was interrupted before the requested operations for iTunes could be completed. Your systems has not been modified." I NEED HELP, PLEASE!
I got it figured out myself... yaaaaay for me!
-
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
Bought a new macbook and want to manually manage music onto my iphone 4s (as it is already full of music from old windows laptop) but when i click 'manually manage' and then 'apply' i get the message saying it will erase everything already on there. Need help please!
Before you sync your iPhone make sure that all the music that was synced to your phonereviously has been copied to your iTunes on the new MacBook Pro. Then when you connect your phone you will be able to either sync all music or select only those playlists that you want on the phone.
-
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. Then I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Contact iTunes
Contact iTunes -
Hi i need help please i been playing clash of clans over 13 months. And today o realise what someone using my game Centra. Someone playing on my game Clash of Clans. I been change my Apple ID password, email, but doesn't work. When I playing game I can see what someone else trying connecting to my game And I don't know what to do.So if you can help me please? I don't wanna lose my game.
Hello Vaidas Vaidas,
It sounds like you are noticing someone else is accessing your Clash of Clans data by playing the game and you have tried to reset your Apple ID password. If you are following the steps outlined in this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
What is preventing you from changing your password? Any error messages or prompts?
Thank you for using Apple Support Communities.
All the best,
Sterling -
i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.
To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync.
Maybe you are looking for
-
Creative Cloud for teams downloads as a trial and asks for a serial number
My employer purchased a Creative Cloud for teams account. I'm using my Adobe ID and trying to install the applications on my laptop at home. When the applications launch, they say I'm running a trail version. Then I'm given the option to license the
-
How do I add multiple songs to the iPod library at the same time?
Before the iTunes update, I was able to add multiple songs to the library. Now I must add one song at a time. How can I get enable my iTunes to allow me to "add file to library" with more than one song?
-
To download you need iTunes but iTunes never loads from "view in iTunes"
I have installed iTunes 10.1.1 and I have all the Windows requirements to run it, as shown here: http://www.apple.com/itunes/affiliates/download/?id=262272137 I click on links from iTunes email and see the dialog: *"one moment please, connecting to t
-
Is WebDynpro ABAP a viable option?
Hi all Some generic questions, is WebDynpro ABAP a viable option? Can I suggest it to the customers? Is it a good practice to have UI and Business logic on the same server? Y are two strains of webdynpro one for ABAP and one for Java necessary? I hav
-
What does Spotlight omit from its search?
Disturbingly, Spotlight does not find everything. For example, it does not find the folders in /Library/Preferences. What is it defined to search?