Need HELP please i got problems with my HP recovery
Please help i can't do anything on my Hp ProBook 4520s dont know how too recovery it i use bios HDD Self Test and it stop on Test2 on 10% and it dont do anything. I don't have any CD. I'm not good at this but what is the boot device or how can i do it PLEASE help ME.
No one can help me i can't belive it
Similar Messages
-
Need Help Please: Audigy2 Value conflict with onboard sound
<SPAN class=postbody>System info: Windows XP Home Edition, 2.4 GHz IntelPent4, 52MB of RAM; DDR 200(33MHz), MSI MS-6547 (645 Ultra) motherboard. I need help! Sigh...well I am trying to put in a Soundblaster Audigy2 into my computer. I am under the impression that I have to disable and remove all onboard sound b/c it conflicts with the new sound card, ?. I currently have onboard sound ( AC97 Audio Controller ). I went to add/remove programs and removed the AC97 from there. I also went to MyComputer/Properties/Hardware/DeviceManager/Sound,Video,andGameControllers/AC97AudioContoller and deleted it. st Question: Under DeviceManager/Sound,Video,GameControllers...Do I need to remove the Legacy Audio Drivers? I know that I have to delete the rest of the drivers for AC97 and out of chance would Legacy be those drivers? I am guessing no...Also, is there anything else that I have to delete for the on board sound program to be gone? 2nd Question: I went to BIOS, and since I have windows XP home edition I think that configuration is a little different from what I read(I wont bore you with that). So, where do I go to "disable" the onboard sound in BIOS for Windows XP HomeEdition? Also, I read something about making sure the "Chip" was disabled but I could be paranoid. Do I need to worry about that? If you made it through all that text I thank you dearly. I hope that I can get some help from someone b/c I know nothing. I am afraid of making the wrong choice on BIOS and messing everything up. Thank You so Much! Ross Message Edited by RossRude3 on 04-06-2005 0:48 AM
Ross,
To fully disable teh onboard audio you would need to go into the BIOS to disable the Onboard Audio chip there. The manual with your motherboard or PC should have more detail on where exactly to find this setting, as it will differ per BIOS type. Generally it should be under a heading like Integrated Peripherals, and should be marked as the Onboard Audio chip, or AC97 Audio.
Cat -
NEED HELP HAVING SOME SERIOUS PROBLEMS WITH X-FI PLATI
My sound card is only about 2-3 weeks old and was running fine uptill about a few days ago then it started having some problems the first was it wouldn't play audio in windows media player movie or music, it worked fine using other programs to play movies or music. Another problem I'm gettin is that the volume will be much lower than it should and this doesn't matter what program I use this does go away sometimes although I still dont know what causes it. I'm also getting intermittent sound problems in BF2 like not hearing sound when I switch to rear view which didn't happen before. I've tried trouble shooting it myself but to no avail. I tried installing it on my other hard dri've which is clean but even though I did a full installation it won't even recognize the card and says there is a prolem with the drivers. I can't understand why my sound card won't work on my second hard dri've and why I am having problems with it on my first. If anyone could help me with this problem it would be greatly appreciated. By the way I have a DFI LanParty NF4 Sli-DR, AMD Atholon 64 3000+, XFX 6800GS PCI-Express 256MB, 2GB OCZ Gold Dual Channel DDR 400,Ultra 500watt PSU, Logitech Z-5500 5. Speakers. My first hard dri've is a Western Digital Caviar SE6 SATA 2 and my second hard dri've is a Hitachi Deskstar T7K250 SATA 2, they are both 250GB and are seperate they aren't connected to my motherboard or even on at the same time.Message Edited by RogueChaos on 05-3-2006 05:05 PM
No help, but i agree with skullcracker!!! Return it ASAP!! You will thank us for this vital information!!!Message Edited by HaZe303 on 05-4-2006 06:29 AM
-
HELP!!! my boy friend did a system update on my iphone 4 tonight and it changed my password to unlock my screen at first it was saying to try back in so many minutes disabled well now its disabled saying connect to itunes but i have never been on itunes before on anything other then my phone so im lost someone please help
LOST PASSCODE
You should be able to remove the passcode by restoring the device. Do the following:
Connect the device to the computer to which you normally sync;
Open iTunes (Note: If iTunes prompts you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes" in http://support.apple.com/kb/ht1212 )
Right-click the device in the left column of iTunes and select Back up (read this article on how to restore http://support.apple.com/kb/HT1766 )
When the backup is complete, select Restore
When finished, restore from your most recent backup
To restore read the restore section in this article http://support.apple.com/kb/HT1766
If that doesn’t work you will need to perform a factory restore to remove it. -
Need Help Fast! Big Problem with iRecruitment after Clone.
I recently cloned my iRecruitment node (And all other nodes) to new windows server. All the other nodes work fine, no problems. However iRec does not work.
Any help would be great!!!!
These are the problem I am having.
I can get to the iRecruitment “Visitor Home Page” but that is about it. If I do a search I am routed right back to the “iRecruitment Visitor Home Page”.
"Register today" I get sent back to the "iRecruitment Visitor Home Page”
"iRecruitment Tips" works.
"Login" I get sent back to the "iRecruitment Visitor Home Page”
"forget your password?" I get sent back to the "iRecruitment Visitor Home Page”
"Manage my Account" I go to the "Visitor Login Page" from thier all links send me back to "Visitor
Login Page".
"Conduct Job Search" I go to "Available Jobs" from thier select "City Location" and click "Search" I get sent back to "Available Jobs" with "No s
earch conducted." displayed. The "Advanced Search" button sends me to the "Avai
lable Jobs >> Advanced Search" page. with no ability to search.
"View Job Basket" I go to "Visitor Job Basket Page" with "No results found"
At the same time I also cloned onto a new set of Test servers and those work fine.If I use the “nvciebizirec.nvci.org:80” name the iRec application works just fine from my intranet. When I change these values below to use the name needed to be used externally “irecruitment.nevadacancerinstitute.org:80” iRec fails to work, I get to the "iRecruitment Visitor Home Page" but nothing works. I get kicked back to the "i Recruitment Visitor Home Page".
LEVEL_ID,PROFILE_OPTION_ID,PROFILE_OPTION_NAME,PROFILE_OPTION_VALUE,LEVEL_VALUE2
10007,2353,APPS_WEB_AGENT,http://nvciebizirec.nvci.org:80/pls/EBIZ01PD,2104
10007,3804,APPS_SERVLET_AGENT,http://nvciebizirec.nvci.org:80/oa_servlets,2104
10007,4177,APPS_JSP_AGENT,http://nvciebizirec.nvci.org:80,2104
10007,4528,APPS_FRAMEWORK_AGENT,http://nvciebizirec.nvci.org:80,2104
10007,3769,ICX_FORMS_LAUNCHER,http://invciebizirec.nvci.org:80/dev60cgi/ifcgi60.exe,2104
10007,3567,ICX_DISCOVERER_LAUNCHER,http://nvciebizirec.nvci.org:80/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE],2104
10007,4991,ICX_DISCOVERER_VIEWER_LAUNCHER,http://nvciebizirec.nvci.org:80/discoverer4i/viewer?Connect=[APPS_SECURE],2104
10007,7970,APPS_PORTAL,http://nvciebizirec.nvci.org:80/pls/EBIZ01PD_portal30/portal30.home,2104
10007,3627,CZ_UIMGR_URL,http://nvciebizirec.nvci.org:80/configurator/oracle.apps.cz.servlet.UiServlet,2104
10007,3876,ASO_CONFIGURATOR_URL,http://nvciebizirec.nvci.org:80/configurator/oracle.apps.cz.servlet.UiServlet,2104
10007,3071,TCF:HOST,http://nvciebizirec.nvci.org:80/oa_servlets,2104 -
NEED HELP PLEASE! itunes problem.
Okay so I am trying to download itunes 10.6.3 but when I do nothing happens. It stays at itunes 10.6.1. Now i looked over the requirements for the 10.6.3 and it says i need 200 MB and when i go to download it, it only says i have 119. Now I deleted a bunch of stuff but nothing happened still. I looked all over and found no help at all so I'm turning to this. May someone please help me!
Try another computer and see if it recognizes it.
Dave M.
MacOSG Founder/Ambassador An Apple User Group iTunes: MacOSG Podcast
Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch) -
HELP PLEASE! Major Problem with FCP Project
OK I am starting to panic. I was editing a wedding video for a client on this 150GB proMAX external hard drive. Everything as fine until this morning. Now when I go to open the project I always get a fatal error.
What happens is the project begins to load but then gets to one unrendered point on my timeline and it just hangs. I get that spinning ball of death and I'm not sure why. Then the program "quits unexpectedly." I have tried this several times and consistently get the same result.
I have tried opening this project on my MacBook and the same thing occurs. Can anyone PLEASE help me with this issue? I would appreciate any helpsounds like a corrupted clip.
disconnect the proMAX drive first, then open the project.
when the project has opened (with all media offline) then reconnect and mount the proMAX drive.
now you can start to reconnect the media ... but do it in parts, not all in one go. by a gradual process you should eventually discover which clip is causing the crash .... when you find out the corrupt clip, recapture from source.
good luck
Andy -
HT4527 Help please!! problems with moving to new computer
Hi,
I've been trying to transfer my i Tunes library to my new computer and have run into problems. I've followed the directions in the article on the apple website HT4527 using the external hard drive method of transfer, and although this has successfully moved all my music I seem to have lost all my playlists. Also my new computer doesn't recognise my iPod or i Phone anymore.
My old computer was running windows XP but I did have the latest version of i Tunes. My new computer is running Windows 7.
Where did I go wrong?
AAArghI suspect you only copied the media folder, instead of copying the main iTunes folder. Playlists, ratings, play counts etc. are all stored in the iTunes Library.itl file that is the core of your library. Migrate the whole library properly and everything ends up on the new system. This is my suggested process.
Backup the library with this User Tip.
Restore the backup to your new computer using the same tool used to back it up.
Deauthorize the old computer if you no longer want to access protected content on it.
Keep your backup up-to-date in future.
tt2 -
Need Help FAST||! Big Problem with Oracle on Windows.
I have Oracle 9.2.0.6 on Windows 2003 Enterprise Edition SP2. My oracle SID in XRTY01PD. The OracleServiceXRTY01PD Startup Type is Automatic.
The Service starts but the database does not open. When I go to a command prompt and log into SQLPlus and connect using "/ as sysdba" I get connected to a idle instance. I tell it to Startup and it starts and opens no problem. No errors in the alter log or the event viewer.
I found a note: 1022458.6 dated 2007, that Oracle on NT has to have a 4 character SID. I can not believe that is this day and age I can only have 4 characters in the SID? Is this the case with Windows 2003? Does anyone know a work around for this?Hi Chris,
Take a look on this link:
- http://www.dba-oracle.com/oracle9iAS_tips_windows_service.htm
Cheers,
Francisco Munoz Alvarez
http://www.oraclenz.com -
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.
-
had a problem with my itunes so i had went on itunes website and reinstall itunes for windows and after it complete it said that the feature yoy are trying to use is on a network resource that is unavailable i need help please!!!!!!!!!
first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
next, download and install the revo uninstaller http://http://www.revouninstaller.com/revo_uninstaller_free_download.html. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
next download itunes. it worked for me hope this is helpful!!
oonce you get into the revo uninstallergo thru to delete itunes hit uninstall on the itunes icon then you will go thru to it will tell u the same nmessage about the feature and network hit cancell then go thru and hit scan (make sure bthe advance scan button is pushed) this will take awhile but go thru the list and hit everything associated with itunes. hit delete then install itunes again. it worked for me hope it works for you! -
Dear sirs,
Could you please help me on my problem with my apple ID
I create new account with security questions, and when I try to purchase paid application,it ask me for answers the questions but it's not working,
My account have 50$ and still didn't buy anythingYou need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(100546) -
Hi. I have got problem with my ITunes. Every time I´m opening the program I´ve got the message: One unkwown problem is appering (-42032) Can anybode please tell me what to do wit this error? Thanks
Gary,
discussions may sometimes be slow for an hour or so (at which point the opening page of discussions will eventually apologize for the inconvenience, back on line soon...) but your description looks like a cache problem.
Try OnyX freeware to do some cleanup and see if that helps.
http://www.titanium.free.fr/index.html -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
i dont know how i got my photos to my ipod touch from my pc and now i wanna delete them but couldn't. so need help. please let me know.
To turn off auto sync - launch iTunes and go to Edit>Preferences>Devices - check the box at the bottom that says - Prevent iPod, iPhones and iPads from syncing automatically. Click OK and then quit iTunes.
Connect your iDevice to your PC.
Launch iTunes,
Click on the device name on the left side of the iTunes Window.
Click on the Photos Tab in the iTunes window on the right.
Untick all of the photos or albums that you want to remove.
Click on Apply in the lower right corner of iTunes
If you untick or uncheck the Sync Photos heading and then click Apply it will remove all of the photos from the device when it syncs. In this screenshot - I have only certain albums and events selected to sync.
Maybe you are looking for
-
How to connect an infocus projector LP530 to MacBook Pro
We are trying to run slide show using an older IN focus projector (LP 530). . Our lab top is a 3 year mac book pro . It's not recognizing.
-
I need help because I recently purchased my Macbook Pro and I am trying to open a book that I purchased in Ibooks on my sons computer. We share an icloud account and my computer keeps saying that my computer is not authorized to open the Ibooks. How
-
How to get the returned error messages in the Try/Catch block in DS 3.0?
A customer sent me the following questions when he tried to implement custom error handling in DS 3.0. I could only find the function "smtp_to" can return the last few lines of trace or error log file but this is not what he wants. Does anyone know t
-
I tried the jsphotel example and it works but on jdeveloper the design window is not opening properly. Whats wrong, I use the production (!!!!) build 343. Before taalking about 3.0 is there no plan for a version where everythings works which is writt
-
Unable to install PlayCenter/Alternative CMSS Meth
I've tried nearly everything. I have an SB Li've! 5. LS. Running on a clean install. When I try installing Playcenter from my flawless, scratchless CD I get two read errors. The rest of the install goes flawless. I've installed it before from this sa