NEED HELP PLEASE! URGENT

Question

Hi guys. My iphone 3gs digitizer wasnt completely functional because some parts of it didnt respon to touch, so I decided to replace it myself since there are no apple stores around where I live. I bought a digitizer set with home button and speaker etc. So only thing I had to do was to unplug 1,2,3 connectors , remove the lcd from old digitizer, and place it in the new digitizer. I did that succesfully, but when I tried to reconect everything, a problem occured. I accidentally ruined lcd flex cable so the lcd cannot be connected to the logicboard. Logic board is fine, but the flex cable is messed up and I need to buy a new lcd. I connected #3 and #2 connectors to their place on the motherboard and left the #1 connector unpluged because it cant be plugged in. I powered on my phone, and noticed that the screen was black ( as expected ), and another problem occured which was that my phone could not respond to touch. I can receive calls ( i plug my headphones and use the button to answer call and then unplug them and I can hear the voice on the other side of the speaker so that means that i plugged #3 connector correctly ) I tried reconnecting #2 cable and I know its plugged correctly in the motherboard but the phone is still not responding to touch. I tried a hard reset, and it didnt help. I dont want to restore my phone because I wont be able to activate my phone and wont be able to receive calls. SO IS MY #2 CONNECTOR RUINED ON THE LOGIC BOARD OR THE LCD NEEDS TO BE PLUGGED IN IN ORDER FOR DIGITIZER TO WORK? help please ( i tried with an another digitizer and the same lcd and have the same problem, help me please

Answer 1

As I said above, there are no apple stores near me. There are no apple stores in my country at all. The closest apple store is 2000 km away from where I live, and my phone wasnt under warranty anyway and I dont care about warranty at all. I just want to know the answer to the question I asked above. Thanks for your response anyway mate, cheers