Need help PLZ, upgrade my sodimm with compatible part

Hi..
I have laptop Model No. is Pavilion 2320ex , with 4GB ram as shown on the pic
"hp spare No. 641369-001"
1- What is the best match for this model ?
2- Is there any problem of using a model 1Rx8 insted of 2Rx8 , and 12800 insted of 12800S (i mean without s)
3- I found some models with this specs 12800s-11-11-f3, is that the same of my model?
I found alot of memory model with different configurations , some of them 1.35v, i guess my model is 1.5v
Kingston search engine gave me this match "kth-x3c/4g" which is not available on my local area store !
Please help me how to get the best match to work with my ram without any conflicts.
Thank you..

Hi,
Can you order online ? Or please use the following site to scan your machine. It will tell you exactly what you need and where to buy or you can also use the information to buy elsewhere:
http://www.crucial.com/usa/en/systemscanner
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Please I need help in upgrading applications

Please I need help in upgrading my pdf-notes for ipad. it seemed like somebody hijacked my Apple ID, I had since solve the problem with Apple, I still have my original email address but I was unable to upgrade all applications I bought before my username was hijacked and pdf-notes is one of the applications. kindly advice me on what to do to upgrade.
Thanks. Jimmy

Okay Demo. My theory is that accessing iCloud if apps were backed up to it can be redownload end then updated. I am thinking that with the new apple ID the iCloud account may only recognize the high jacked ID. I don't know if I made it clearer but I can do some digging. I don't like to see people using Apple devices having a tuff time. Not cool.

Iphoto library needs to be upgraded to work with this version of iPhoto. Will my Facebook albums remain?

I just upgraded my computer to yosemite and that includes the iPhoto application.
After opening iPhoto it says "The photo library needs to be upgraded to work with this version of iPhoto." I'm worried that if I chose to upgrade I will 1. lose all my photos and 2. have my synced facebok albums taken off Facebook.
One time I moved my iPhoto library to an external hard drive and lost all my Facebook album photos so I don't want to make the same mistake.
So does anyone know if I chose to go through with this upgrade will I lose my photos in the iPhoto and the synced albums on Facebook? If I do lose photos, how do I go recover my previous iPhoto version?

Just to confirm. When I saved a copy of my iPhoto library on my external harddrive that's "backing-up" right?
Also, is there anyway on Facebook to tell which albums are synced with my iPhoto so that I know which ones will be gone if something does go wrong?
Sorry one more question Larry. I keep reading issues people are having with upgrading their iPhoto to 9.6 and the upgraded iPhoto does not recognize their library (see: https://discussions.apple.com/thread/6676471). If this happens to me and I have to repair or re-install my iPhoto will my Facebook albums be affected?
Thanks for your help Larry I appreciate it

When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck.

When I click on iPhoto icon I get a box that reads "The photo library needs to be upgraded to work with this version of iPhoto." Whether I hit Quit or Upgrade the problem is not fixed. Any suggestions? Yes, I have tried Command Option iPhoto..no luck. I think I may have hit Upgrade the first time. I really need this to be fixed ASAP. Thanks for your help.

Assuming iPhoto 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Purchasing MBA but need help on upgrades.

Hello, I am purchasing an MBA, but need help on upgrades based on the following; I will be attending medical school in the fall, I take a wide range of photos of my family on my iPhone that I play with on certain apps and do store them in the cloud and computer, I have a medium iTunes libaray but will get bigger with the additional apps for school, I am a moderate gamer (I play games online as well as my kids do, but nothing that will take up a ton of space when downloaded like Assassins Creed) and I plan on running MS Office. I've already decided to upgrade to the 8GB but I can't decide if I should upgrade to the 512GB Flash or stay with the 256GB and upgrade from the i5 to i7 or stick with it. I don't plan on buying another until I graduate. I am new to the Mac World outside of the use of my iPhone which convience me to convert from my awful PC. Can you MBA experts relay some advice on a good route. I appreciate it, Thanks

My rule of thumb is to buy the largest drive storage available. Especially since the Air models can't be upgraded to a larger size in the future. I also like to buy the most amount of RAM offer and as with the storage space on the Air models can't be upgraded once purchased. So Bite the Bullet and spend the money to get both the most RAM and the largest storage offered as neither can be increased later on. Also I suggest you spend the extra money on the Applecare extended warranty because to fix any Mac once the standard warranty is over is very expensive. You have until the one year standard warranty runs out to buy the Applecare extended warranty.

When trying to open iPhoto the computer says: 'The photo library needs to be upgraded to work with this version of iPhoto.' So I click 'upgrade' Then it says: 'You can't open your current photo library using this version of iPhoto.' Etcetera...

When trying to open iPhoto the computer says:
‘The photo library needs to be upgraded to work with this version of iPhoto.’
So I click ‘upgrade’
Then it says: ‘You can’t open your current photo library using this version of iPhoto.’
Etcetera...
What to do??
Theo

Is your Apple Intel-based, poppelmacbook? If not, you should consider treating yourself to a new Mac. Last December I gave up my old because it just could not update...anything because it was not Intel-based. Updating everything on this OS to 10.9 has been confusing for me, but I just could not work with that old Mac because the updates were too smart? for my 10.6. It is upstairs now...for visiting family: games, garage band, etc.--things I never did use. Apple refurbished and purchase the extended warranty. Apple loyalist since late 1980's.

IPhoto keeps saying The photo library needs to be upgraded to work with this version of iPhoto

Upgraded to new Lion iMac from Snow Leopard iMac, then upgraded to iCloud. I upgraded to the latest version of iPhoto. I get this message that says that "The photo library needs to be upgraded to work with this version of iPhoto. I have iPhoto '11 version 9.2.1(628)
I have attached the screenshot here. I have over 31,000 photos in this library. I click upgrade and it shows me a line for a while and then goes to the photos. Everything looks fine except photstream doesn't work and I always get this same message when I open iPhoto again.
Another detail is that I do have mobileme web albums still publishing from this iPhoto. Could this be causing a problem?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

"the iPhoto library needs to be upgraded to work with this version of iPhoto." WHAT?

Ran software update a few weeks back and now I cannot seem to open iPhoto or access files within.
The error message as soon as I open up iPhoto reads: "the iPhoto library needs to be upgraded to work with this version of iPhoto."
What do I do to overcome this? What happens to the files in "UPGRADE?"
Should I be worried about the safety of the files during upgrade?

Yes - you should always be worried about yoru files if they are important to you - never upgrade without backingup just in case (the normal case is no problem but you must be prepared)
LN

The photo library needs to be upgraded to work with this version of iPhoto??

Just got this message after upgrading to Mavericks...
The photo library needs to be upgraded to work with this version of iPhoto.
Your photo library will not be readable by previous versions of iPhoto after the upgrade. The upgrade process for very large libraries may take an hour or more to complete.
Is is ok to go ahead with this?
I have done a back up to my time machine but I am concerned when it says the library will not be readable by previous versions, what happens if I have to restore my Mac from the time machine, which would mean reverting back to Snow Leopard?

Well you have two choices - upgrade the iPhoto library and use it - or not upgreade it and stop using - the current version can not use older libraries so unless you upgrade the library to match the application version you can not use iPhoto
And as warned once you upgrade the libary then older versions will not be able to use it
LN

My iphoto on my imac somehow updated on its own and now its saying "The photo library needs to be upgraded to work with this version of iPhoto." have i lost my photos?

I tried to open my iphoto last night on my iMAC and it somehow updated on it's own and now has a message saying "The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade.The upgrade process for very large libraries may take an hour or more to complete." I only have the option to quit or upgrade. What does this mean? Have i lost my pictures? i don't properly have my back up hard drive set up so all my pictures aren't backed up.

"The photo library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iPhoto after the upgrade.The upgrade process for very large libraries may take an hour or more to complete."
After your iPhoto application got updated to a new version, iPhoto will convert the iPhoto library to a new format, that is used by the new version. The warning tells you, that after this upgrade older iPhoto versions will no longer be able to read the iPhoto library. If you have a second Mac with older software that might be important. Make a backup to be on the safe side and let iPhoto upgrade the library.

Help, I can no longer open my IPhoto, I get a message that says the library needs to be upgraded to work with this version of IPhoto

Help, I can no longer open my I Photo's. I get a message that says the library needs to be updated to work with this version of IPhoto. What have I done and what can I do to view them again.

You're welcome
It should have showed you a progress bar, and hopefully it was moving steadily

I need help please, upgrading from OS 10.6.8...

Please help me - I'm such a technophobe!! I need help upgrading from OS 10.6.8... I get part way through the process and get a box saying "The link needs to be opened with an application" and I don't know what to do next...

The only way to upgrade from 10.6.8 (which is high as Snow Leopard goes) is to obtain Lion or Mountain Lion from the Online Apple Store or Yosemite from the Mac App Store.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price (though it's reported to have been removed from sale in some countries so may well cease to be available generally) but there seems little point as the system requirements are the same for Yosemite (10.10.x) - which is free - unless you need to run specific software which will run on Mountain Lion only. Mavericks (10.9.x) is no longer available.
The requirements for Mountain Lion and Yosemite are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Yosemite is available from the Mac App Store (in Applications). Mountain Lion can be obtained the Online Apple Store.
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

Need help regarding upgrading Oracle 10g Forms to Oracle 11g Fusion Middlew

Hi All,
I am trying to create a workshop on a VM for showing the migration / upgrading of Oracle Forms 10g to Oracle 11g FMW using the Upgrade Assistant tool available in <ORACLE_HOME>/bin/ua.bat.
As per my understanding of pre-requisites:
1)     I need to install Oracle SOA Suite 10g on my VM.
2)     I also need to install Oracle SOA Suite 11g on my VM.
3)     I need to install Oracle Forms/Reports Services 10g on my Oracle SOA Suite 10g installation.
4)     I need to run Oracle Forms/reports installer on my Oracle SOA Suite 11g installation.
5)     I need to run upgrade assistant tool on my VM to upgrade my form from source(Oracle SOA Suite 10g) to destination(Oracle SOA Suite 11g). Is it mandatory for this migration that I should have Oracle SOA Suite 10g and Oracle SOA Suite 11g on the same system ?
Having all these software installed on one VM would be difficult. So just wanted to check can I avoid any software to install on VM ?
If there is any alternative suggestion then please let me know.
Regards,

What do you want to do with the SOA-suite? At least for Froms10G is is not necessary.

Need help in Creating DB manually with OFA

Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.Abbasi

Abbasi wrote:
Hi,
I want to create database in 10g manually and for this purpose
I need help.
since we can use OFA for storing Control files, and redolog file
and datafile by describing them in Create database command but
how to store any instance related file like spfile, pfile or network
related file.
once the oracle 10g database software is installed then if we want
to create database then how can we separate the database file and
all other instance files from software binaries because I've noted
that creating database with DBCA create all instance files along with
binary files of the software although DBCA give you option of creating
database related file in some other location/directory.
kindly help me in this I want to achieve above task in compliance with
OFA
Thanks and Regards,
D.AbbasiTHe OFA spec (as best I recall) states that one of the levels of directory for all of your data files will be the db name. So if you name your database 'orcl', every file system in which you keep any files related to 'orcl' will be in a directory name 'orcl'.
As for what happend when you created your db. Oracle will default to putting things in the Oracle home structure because that's the only thing he can guarantee will be there. But you had the option (indeed, the obligation) to override these defaults.
BTW, when using dbca, if you chose any of the pre-canned database types, the database will be created by doing a restore from a pre-canned backup. If you chose 'custom' database, the database will be created by way of a CREATE DATABASE script. It would be instructive time well spent for you to go through dbca and select 'custom database', pay attention to all of the options as you work through, then at then end, deselect "create database" and select "generate scripts". Do the same for one of the pre-defined database types. Then study the scripts generated by each method.
Edited by: EdStevens on Aug 16, 2009 8:46 PM

Need help. importing pictures to timeline with various length.

Need help cant find old toturial
I am trying to make a template for a picture movie where i have everything ready so i just need to add 250 pictures and then it will automaticly shift the pictures to the beat of the music. I once saw a toturial how to do this but cant find it. it was something with manually setting markers at the music beat and then just add all the pictures. but i must have missed something pls help..
Bo

Its called automate to sequence with unnumbered markers.
http://tv.adobe.com/watch/learn-premiere-pro-cs5/gs04-making-a-rough-cut-in-adobe-premiere -pro/
http://help.adobe.com/en_US/premierepro/cs/using/WS1c9bc5c2e465a58a91cf0b1038518aef7-7d1ba .html

Need help PLZ, upgrade my sodimm with compatible part

Similar Messages

Maybe you are looking for