Need help re iPhone for Ukrainian exchange student
Hi. We will be hosting an exchange student from Ukraine during the next school year. Her parents want to buy her an iPhone for her use while she's here. We have offered to cover the cost of her plan (up to a certain amount of minutes, messages, and data per month) and want to get a no-contract phone because she'll only be with us for a year. I'd also like to make sure that she can take the phone back home with her at the end of the school year and get it set up with a local service provider.
Can you recommend which iPhone/ carrier I should be looking at? I assume an unlocked GSM phone is the way to go, but I'm not sure which carriers will let me activate it without a contract, or how easy it will be for our student to activate it in Ukraine when she goes back.
Thanks!
Here is a list of all supported carriers: http://support.apple.com/kb/ht1937
No distinction is made between GSM and CDMA carriers. CDMA phones are not "unlocked" and can not be used on GSM except for International roaming. In the case of the iPhone 4, the CDMA version can not be used on GSM networks at all.
Similar Messages
-
Need help with server for Microsoft Exchange
Okay. My college uses Microsoft Outlook and I wanted to be able to check it from my phone.
So I am trying to use microsoft exchange.
but I don't know what to put in the server part.
I don't get step three
3.Your iPhone (or iPod touch) will now try to locate your Exchange server using Microsoft's Autodiscovery service. If the server cannot be located, the screen below is shown. Enter your front-end Exchange server's complete address in the Server field. Contact your Exchange server administrator if you are unsure of the address.
any help or being pushed in the right direction would be greatly apperciated!!Your college IT people would have to have "enabled" iPhone connections to their Exchange servers, it's quite possible they have not done that. In either case, contact your college IT people to determine if they even allow this and, if they do, the Exchange server info you need to enter. They are the key.
-
i need help my iphone 5c has been on charge for 5 hours and still has not turned on past the charging symbol, what can i do? (baring in mind i got this phone 2 days ago brand new.)
Do you see a lightning bolt near the battery , Battery is charging (supposedly( IF not return to where you purchased it (also make sure that the charger is on) if still not charging with lighting bolt bring it back
-
Hi All, Need help my iphone 4 lock after upgrape ios7.1 (no service). i buy a secondhand phone not know first apple id. please advise how to normalize
You will need the original owner of the iPhone to unlock it for you, or the iPhone will remain useless. It has been Activation Locked, which is described here:
http://support.apple.com/kb/HT5818 -
Hi.I need help.my iphone was Stolen .how can I get back my iphone. Serial No.DX******PMW.could you help me find my iphone.thank you very much.could you send me the ICCID number to help me find the iphone.if you can help me.
<Personal Information Edited by Host>
Sincerely a Chinese girl really need your helpSorry we are all users on this User Community No Apple Staff
Read this .
http://support.apple.com/kb/HT2526
Apple do not and cannot assist in finding stolen property ,that is the responsility of your Police -
I need help choosing RAM for MSI PM8PM-V 7222 VER. 2.0 MB
hey everyone as you know my MB is in the subject and i need help buying ram for it. on the MSI website it says it can surpport max. 2GB so 1GB in each slot? it only has 2 slots also what DDR and MHZ clock, DRAM fequency etc does the ram have to be and both single sided or double sided or 1 single and 1 double?
thanksQuote
also what DDR and MHZ clock, DRAM fequency etc does the ram have to be
http://global.msi.eu/index.php?func=proddesc&maincat_no=1&prod_no=1039
Quote
• Supports DDR2 533/400 memory interface.
Check the memory support list for best compatibility:
http://global.msi.eu/uploads/test_report/TR10_1039.pdf -
guys, i need help. my iphone 4s lost everything. i got an email from "find my phone" saying that all will be erased. what can i do???? please help
How did u get that iphone? the original owner is screwing you via icloud account...
-
I need help finding cases for the ipod touch thrid gen help.
i need help finding case for ipod touch thrid gen help.
- Try another cable.
- Try another USB port
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Try on another computer. Just backup a couple of times. Do not sync. -
hey i need help my iphone 5 all of a sudden has like an all white border around it and sometimes it has a blank screen what seems to be the problem?
Try turning off the following:
Settings>Mail, Contacts, Calendars>Push>OFF
Settings>Notifications>Mail>Gmail>Notification Center>OFF
Settings>Mail, Contacts, Calendars>Fetch New Data>Off -
Need help regarding the location of Exchange 2013 Logs for parsing
Hi, I am trying to create reports based on the logs that are created on my exchange server. I am using
exchange 2013. My problem is that I cannot handle every log, and instead want specific types of logs.
I need help finding the specific locations of the following types of logs (If they even exist), so that I can parse them and use them effectively:
Audit Logs (Mailbox logons, Mailbox permission changes, Mailbox property changes,
Exchange store changes)
Mail Report Logs (Mailbox size and growth, Mailbox storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes)
Exchange Traffic Reports (Details on size and amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users)
I understand this might sound like a huge undertaking, but any help that can be provided would be appreciated.
Again, I need information on the locations of these types of logs on the exchange server, so that I can parse them. Collecting them all and searching through them is not practical for my available resources.
Thanks,
MattAudit Logs (Mailbox logons, Mailbox permission
changes, Mailbox property changes, Exchange
store changes) ---- these are two type of logs, 1. mailbox audit logs and that is stored in each mailbox under dumpster
http://technet.microsoft.com/en-us/library/ff461930(v=exchg.150).aspx however you need to
enable
it for individual mailboxes... 2. admin audit log, this is stored into a system mailbox dumpster.... http://technet.microsoft.com/en-us/library/dd335052(v=exchg.141).aspx
Mail Report Logs (Mailbox size and growth, Mailbox
storage growth, Enabled users, Expired and Soon-to-Expire Mailboxes) ---- there isn't any specific log for this, you would need to create some time of script to collect this every day for you and store it somewhere... This is a good start... http://www.stevieg.org/2011/06/exchange-environment-report/
Exchange Traffic Reports (Details on size and
amount of messages sent and recieved, Internet traffic [to and from], Traffic between exchange users) ----- This you can get from message tracking log... http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx -
HT201304 i need help blocking safari for explicit material for my iphone 4s. any ideas
i really need help setting up a parental control of some kind on a iphone 4s for mt 12 year old son any help would be appreciated.
You can't restrict Safari on the iPhone other than to turn it off. My recommendation is that you turn it off in restrictions, then use an alternate browser from the app store that offers this capability, such as McGruff Safeguard Browser.
-
I NEED HELP !
Welcome to the user to User Technical Support Forum provided by Apple.
Clearly state your Issue and the Troubleshooting Steps you have tried to Resolve it -
Need help with assignment for class. its for my high school project :(
i really need help, my problem is that with my code i cannot get the "previous", "done" and "next" buttons to work.they cannot seem to find the items from each other. so could someone look at those buttons in the code and tell me how to fix please? the code is as follows:
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class GradeCalculator extends JFrame {
private JTextField gradeA = new JTextField(3);
private JTextField gradeB = new JTextField(3);
private JTextField gradeC = new JTextField(3);
private JTextField gradeD = new JTextField(3);
private JTextField gradeE = new JTextField(3);
private JTextField studentsName = new JTextField(15);
private JTextField assignmentOne = new JTextField(5);
private JTextField assignmentTwo = new JTextField(5);
private JTextField assignmentThree = new JTextField(5);
private JTextField examOne = new JTextField(5);
private JTextField examTwo = new JTextField(5);
private JTextArea textOutput;
private JPanel buttonJPanel;
public GradeCalculator(){
JMenu fileMenu = new JMenu("File");
JMenuItem aboutItem = new JMenuItem( "About" );
fileMenu.add( aboutItem );
aboutItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
JOptionPane.showMessageDialog( GradeCalculator.this,
"Grade Calculator Version 1.00. \nMade by Carlson Smith.\nSchool: Pre-University\nSubject: Cape Computer Science.",
"About", JOptionPane.PLAIN_MESSAGE );
JMenuItem exitItem = new JMenuItem( "Exit" );
fileMenu.add( exitItem );
exitItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
System.exit( 0 );
JMenuBar bar = new JMenuBar();
setJMenuBar(bar);
bar.add(fileMenu);
JTabbedPane tabbedPane = new JTabbedPane();
buttonJPanel = new JPanel();
buttonJPanel.setLayout(new GridLayout(1,2));
JButton ok = new JButton("OK");
ok.addActionListener(new OkBtnListener());
JButton edit = new JButton("EDIT");
edit.addActionListener(new EditBtnListener());
/**JButton previous = new JButton("PREVIOUS");
previous.addActionListener(new PreviousBtnListener());
JButton done = new JButton("DONE");
done.addActionListener(new DoneBtnListener());
JButton next = new JButton("NEXT");
next.addActionListener(new NextBtnListener());
JPanel contentPane = new JPanel();
contentPane.setLayout(new FlowLayout());
contentPane.add(new JLabel("Grade A")/**,BorderLayout.NORTH*/);
contentPane.add(gradeA/**,BorderLayout.NORTH*/);
contentPane.add(new JLabel("Grade B")/**,BorderLayout.WEST*/);
contentPane.add(gradeB/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade C")/**,BorderLayout.WEST*/);
contentPane.add(gradeC/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade D")/**,BorderLayout.WEST*/);
contentPane.add(gradeD/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade E")/**,BorderLayout.WEST*/);
contentPane.add(gradeE/**,BorderLayout.WEST*/);
tabbedPane.addTab("Grade Entry Tab", null, contentPane, "Grade Tab");
//contentPane.add(ok,BorderLayout.WEST);
//contentPane.add(edit,BorderLayout.WEST);
buttonJPanel.add(ok);
buttonJPanel.add(edit);
contentPane.add(buttonJPanel, BorderLayout.WEST);
JPanel content = new JPanel();
content.setLayout(new FlowLayout());
content.add(new JLabel("Student's Name")/**,BorderLayout.EAST*/);
content.add(studentsName/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 1 score:")/**,BorderLayout.EAST*/);
content.add(assignmentOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 2 score:")/**,BorderLayout.EAST*/);
content.add(assignmentTwo/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 3 score:")/**,BorderLayout.EAST*/);
content.add(assignmentThree/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 1 score:")/**,BorderLayout.EAST*/);
content.add(examOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 2 score:")/**,BorderLayout.EAST*/);
content.add(examTwo/**,BorderLayout.EAST*/);
//content.add(previous,BorderLayout.EAST);
//content.add(done,BorderLayout.EAST);
//content.add(next,BorderLayout.EAST);
Box box = Box.createVerticalBox();
String output = "test";
String outputTwo = output;
textOutput = new JTextArea(outputTwo,10,30);
box.add(new JScrollPane(textOutput));
textOutput.setEditable(false);
content.add(box,BorderLayout.SOUTH);
tabbedPane.addTab("Calculator Tab", null, content, "Calculation & Output Tab");
setContentPane(tabbedPane);
pack();
setTitle("Grade Calculator");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setLocationRelativeTo(null);
class OkBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String gradeAA = gradeA.getText();
double gradA = Double.parseDouble(gradeAA);
gradeA.setText(" "+gradA);
String gradeBB = gradeB.getText();
double gradB = Double.parseDouble(gradeBB);
gradeB.setText(" "+gradB);
String gradeCC = gradeC.getText();
double gradC = Double.parseDouble(gradeCC);
gradeC.setText(" "+gradC);
String gradeDD = gradeD.getText();
double gradD = Double.parseDouble(gradeDD);
gradeD.setText(" "+gradD);
String gradeEE = gradeE.getText();
double gradE = Double.parseDouble(gradeEE);
gradeE.setText(" "+gradE);
gradeA.setEditable(false);
gradeB.setEditable(false);
gradeC.setEditable(false);
gradeD.setEditable(false);
gradeE.setEditable(false);
class EditBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
gradeA.setEditable(true);
gradeB.setEditable(true);
gradeC.setEditable(true);
gradeD.setEditable(true);
gradeE.setEditable(true);
/**class PreviousBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
if (i <= 0){
i = 0;
}else if(i > 0){
i = i-1;
class DoneBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
output = "Results \n";
output+= studentName[i]+" Assignment Average = "+averageO[i]+" Exam Average = "+averageT[i]+" Overall average = ";
output+= tAverage[i]+" Letter Grade = "+letterGrade;
class NextBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String [] studentName = new String [40];
double [] assignOne = new double [40];
double [] assignTwo = new double [40];
double [] assignThree = new double [40];
double [] gradeOne = new double [40];
double [] gradeTwo = new double [40];
double [] averageO = new double [40];
double [] averageT = new double [40];
double [] tAverage = new double [40];
char [] letterGrade = new char [40];
double max = 0;
double min = 100;
int i = 0;
while(i < studentName.length){
studentName[i] = studentsName.getText();
studentsName.setText(studentName[i]);
String aOne = assignmentOne.getText();
assignOne[i] = Double.parseDouble(aOne);
assignmentOne.setText(assignOne[i]);
String aTwo = assignmentTwo.getText();
assignTwo[i] = Double.parseDouble(aTwo);
assignmentTwo.setText(assignTwo[i]);
String aThree = assignmentThree.getText();
assignThree[i] = Double.parseDouble(aThree);
assignmentThree.setText(assignThree[i]);
String gOne = examOne.getText();
gradeOne[i] = Double.parseDouble(gOne);
examOne.setText(gradeOne[i]);
String gTwo = examTwo.getText();
gradeTwo = Double.parseDouble(gTwo);
examTwo.setText(gradeTwo[i]);
averageO[i] = (assignOne[i]+assignTwo[i]+assignThree[i])/3;
averageT[i] = (gradeOne[i]+gradeTwo[i])/2;
tAverage[i] = (averageO[i]+averageT[i])/2;
if (tAverage[i] >= gradeA){
letterGrade[i] = 'A';
}else if(tAverage[i] >= gradeB){
letterGrade[i] = 'B';
}else if(tAverage[i] >= gradeC){
letterGrade[i] = 'C';
}else if(tAverage[i] >= gradeD){
letterGrade[i] = 'D';
}else if(tAverage[i] <= gradeE){
letterGrade[i] = 'E';
public static void main(String[]args){
GradeCalculator calWindow = new GradeCalculator();
calWindow.setVisible(true);i have to apologize to jittei for the misunderstand i do not know which defination of terms is for which line of code but i know what they do, to solve the problem i have actually made another class in the workspace file called students and now all the bottons work, all i have to do now is properly arrange and put in some additional lines of code and it will be completed. teacher gave me the idea of putting in a new class to help in calling codes from other subclasses in the main program. ah well guess non of you could think of that thanks for the help-ish and hope yall will atleast try to be nice to new people that come in the room. the new coding is:
of course all the commented out lines are not being used in the program anymore but just there till i have the program working with everything in it runs and performs the actions required now though ^_^
*Group CAPE Computer Science 2007/8
*GradeCalculator.java
*@author Carlson Smith
*@version 3.01 07/02/2008
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class GradeCalculator extends JFrame {
private JTextField gradeA = new JTextField(3);
private JTextField gradeB = new JTextField(3);
private JTextField gradeC = new JTextField(3);
private JTextField gradeD = new JTextField(3);
private JTextField gradeE = new JTextField(3);
private JTextField studentsName = new JTextField(15);
private JTextField assignmentOne = new JTextField(5);
private JTextField assignmentTwo = new JTextField(5);
private JTextField assignmentThree = new JTextField(5);
private JTextField examOne = new JTextField(5);
private JTextField examTwo = new JTextField(5);
private JTextArea textOutput;
private JPanel buttonJPanel;
private JPanel buttonJPanelTwo;
private Student [] students = new Student[40];
private int current = 0;
private String output;
public GradeCalculator(){
JMenu fileMenu = new JMenu("File");
JMenuItem aboutItem = new JMenuItem( "About" );
for (int i=0;i<40;i++){
students[i] = new Student("");
fileMenu.add( aboutItem );
aboutItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
JOptionPane.showMessageDialog( GradeCalculator.this,
"Grade Calculator Version 1.00. \nMade by Carlson Smith.\nSchool: Pre-University\nSubject: Cape Computer Science.",
"About", JOptionPane.PLAIN_MESSAGE );
JMenuItem exitItem = new JMenuItem( "Exit" );
fileMenu.add( exitItem );
exitItem.addActionListener(
new ActionListener()
public void actionPerformed( ActionEvent event )
System.exit( 0 );
JMenuBar bar = new JMenuBar();
setJMenuBar(bar);
bar.add(fileMenu);
JTabbedPane tabbedPane = new JTabbedPane();
buttonJPanel = new JPanel();
buttonJPanel.setLayout(new GridLayout(1,2));
JButton ok = new JButton("OK");
ok.addActionListener(new OkBtnListener());
JButton edit = new JButton("EDIT");
edit.addActionListener(new EditBtnListener());
buttonJPanelTwo = new JPanel();
buttonJPanelTwo.setLayout(new GridLayout(1,3));
JButton previous = new JButton("PREVIOUS");
previous.addActionListener(new PreviousBtnListener());
JButton done = new JButton("DONE");
done.addActionListener(new DoneBtnListener());
JButton next = new JButton("NEXT");
next.addActionListener(new NextBtnListener());
JPanel contentPane = new JPanel();
contentPane.setLayout(new FlowLayout());
contentPane.add(new JLabel("Grade A")/**,BorderLayout.NORTH*/);
contentPane.add(gradeA/**,BorderLayout.NORTH*/);
contentPane.add(new JLabel("Grade B")/**,BorderLayout.WEST*/);
contentPane.add(gradeB/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade C")/**,BorderLayout.WEST*/);
contentPane.add(gradeC/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade D")/**,BorderLayout.WEST*/);
contentPane.add(gradeD/**,BorderLayout.WEST*/);
contentPane.add(new JLabel("Grade E")/**,BorderLayout.WEST*/);
contentPane.add(gradeE/**,BorderLayout.WEST*/);
tabbedPane.addTab("Grade Entry Tab", null, contentPane, "Grade Tab");
//contentPane.add(ok,BorderLayout.WEST);
//contentPane.add(edit,BorderLayout.WEST);
buttonJPanel.add(ok);
buttonJPanel.add(edit);
contentPane.add(buttonJPanel, BorderLayout.WEST);
JPanel content = new JPanel();
content.setLayout(new FlowLayout());
content.add(new JLabel("Student's Name")/**,BorderLayout.EAST*/);
content.add(studentsName/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 1 score:")/**,BorderLayout.EAST*/);
content.add(assignmentOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 2 score:")/**,BorderLayout.EAST*/);
content.add(assignmentTwo/**,BorderLayout.EAST*/);
content.add(new JLabel("Assignment 3 score:")/**,BorderLayout.EAST*/);
content.add(assignmentThree/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 1 score:")/**,BorderLayout.EAST*/);
content.add(examOne/**,BorderLayout.EAST*/);
content.add(new JLabel("Exam 2 score:")/**,BorderLayout.EAST*/);
content.add(examTwo/**,BorderLayout.EAST*/);
//content.add(previous,BorderLayout.EAST);
//content.add(done,BorderLayout.EAST);
//content.add(next,BorderLayout.EAST);
buttonJPanelTwo.add(previous);
buttonJPanelTwo.add(done);
buttonJPanelTwo.add(next);
content.add(buttonJPanelTwo, BorderLayout.EAST);
Box box = Box.createVerticalBox();
//String outputTwo = output;
//textOutput.setText(output);
textOutput = new JTextArea(output,10,30);
box.add(new JScrollPane(textOutput));
//textOutput.setEditable(true);
content.add(box,BorderLayout.SOUTH);
tabbedPane.addTab("Calculator Tab", null, content, "Calculation & Output Tab");
setContentPane(tabbedPane);
pack();
setTitle("Grade Calculator");
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
setLocationRelativeTo(null);
class OkBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
String gradeAA = gradeA.getText();
double gradA = Double.parseDouble(gradeAA);
gradeA.setText(" "+gradA);
String gradeBB = gradeB.getText();
double gradB = Double.parseDouble(gradeBB);
gradeB.setText(" "+gradB);
String gradeCC = gradeC.getText();
double gradC = Double.parseDouble(gradeCC);
gradeC.setText(" "+gradC);
String gradeDD = gradeD.getText();
double gradD = Double.parseDouble(gradeDD);
gradeD.setText(" "+gradD);
String gradeEE = gradeE.getText();
double gradE = Double.parseDouble(gradeEE);
gradeE.setText(" "+gradE);
gradeA.setEditable(false);
gradeB.setEditable(false);
gradeC.setEditable(false);
gradeD.setEditable(false);
gradeE.setEditable(false);
class EditBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
gradeA.setEditable(true);
gradeB.setEditable(true);
gradeC.setEditable(true);
gradeD.setEditable(true);
gradeE.setEditable(true);
class PreviousBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
Student currentStudent = students[current];
currentStudent.setStudentName(studentsName.getText());
currentStudent.setAssignOne(Double.parseDouble(assignmentOne.getText()));
currentStudent.setAssignTwo(Double.parseDouble(assignmentTwo.getText()));
currentStudent.setAssignThree(Double.parseDouble(assignmentThree.getText()));
currentStudent.setExamOneGrade(Double.parseDouble(examOne.getText()));
currentStudent.setExamTwoGrade(Double.parseDouble(examTwo.getText()));
currentStudent = students[current];
if (current <= 0){
current = 0;
}else if(current > 0){
current = current-1;
refresh();
System.out.println(current);
class DoneBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
Student currentStudent = students[current];
//output = "Result \n";
output = currentStudent.getStudentName()+". Assignment Average = "+currentStudent.getAverage()+". Exam Average = "+currentStudent.getExamAverage()+". Overall average = ";
output+= currentStudent.getTotalAverage()/**+" Letter Grade = "+letterGrade[current]*/;
textOutput.setText(output);
System.out.println(output);
currentStudent = students[current];
class NextBtnListener implements ActionListener{
public void actionPerformed(ActionEvent e){
// String [] studentName = new String [40];
// double [] assignOne = new double [40];
// double [] assignTwo = new double [40];
// double [] assignThree = new double [40];
// double [] gradeOne = new double [40];
// double [] gradeTwo = new double [40];
// double [] averageO = new double [40];
// double [] averageT = new double [40];
// double [] tAverage = new double [40];
// char [] letterGrade = new char [40];
//double max = 0;
//double min = 100;
Student currentStudent = students[current];
currentStudent.setStudentName(studentsName.getText());
currentStudent.setAssignOne(Double.parseDouble(assignmentOne.getText()));
currentStudent.setAssignTwo(Double.parseDouble(assignmentTwo.getText()));
currentStudent.setAssignThree(Double.parseDouble(assignmentThree.getText()));
currentStudent.setExamOneGrade(Double.parseDouble(examOne.getText()));
currentStudent.setExamTwoGrade(Double.parseDouble(examTwo.getText()));
// currentStudent = students[current];
current++;
refresh();
/** while(i < studentName.length){
String aOne = assignmentOne.getText();
assignOne[i] = Double.parseDouble(aOne);
assignmentOne.setText(" "+assignOne);
String aTwo = assignmentTwo.getText();
assignTwo[i] = Double.parseDouble(aTwo);
assignmentTwo.setText(" "+assignTwo[i]);
String aThree = assignmentThree.getText();
assignThree[i] = Double.parseDouble(aThree);
assignmentThree.setText(" "+assignThree[i]);
String gOne = examOne.getText();
gradeOne[i] = Double.parseDouble(gOne);
examOne.setText(" "+gradeOne[i]);
String gTwo = examTwo.getText();
gradeTwo[i] = Double.parseDouble(gTwo);
examTwo.setText(" "+gradeTwo[i]);
averageO[i] = (assignOne[i]+assignTwo[i]+assignThree[i])/3;
averageT[i] = (gradeOne[i]+gradeTwo[i])/2;
tAverage[i] = (averageO[i]+averageT[i])/2;
if (tAverage[i] >= Double.parseDouble(gradeA.getText())){
letterGrade[i] = 'A';
}else if(tAverage[i] >= Double.parseDouble(gradeB.getText())){
letterGrade[i] = 'B';
}else if(tAverage[i] >= Double.parseDouble(gradeC.getText())){
letterGrade[i] = 'C';
}else if(tAverage[i] >= Double.parseDouble(gradeD.getText())){
letterGrade[i] = 'D';
}else if(tAverage[i] <= Double.parseDouble(gradeE.getText())){
letterGrade[i] = 'E';
public void refresh(){
Student currentStudent = students[current];
studentsName.setText(currentStudent.getStudentName());
assignmentOne.setText(currentStudent.getAssignOne()+"");
assignmentTwo.setText(currentStudent.getAssignTwo()+"");
assignmentThree.setText(currentStudent.getAssignThree()+"");
examOne.setText(currentStudent.getExamOneGrade()+"");
examTwo.setText(currentStudent.getExamTwoGrade()+"");
public static void main(String[]args){
GradeCalculator calWindow = new GradeCalculator();
calWindow.setVisible(true);
Second class implemented./**
*Group CAPE Computer Science 2007/8
*Student.java
*@author Carlson Smith
*@version 3.01 07/02/2008
public class Student {
private String studentName;
private double assignOne;
private double assignTwo;
private double assignThree;
private double examOneGrade;
private double examTwoGrade;
public Student(String sName){
studentName = sName;
public String getStudentName(){
return studentName;
public double getAssignOne(){
return assignOne;
public double getAssignTwo(){
return assignTwo;
public double getAssignThree(){
return assignThree;
public double getExamOneGrade(){
return examOneGrade;
public double getExamTwoGrade(){
return examTwoGrade;
public void setStudentName(String sName){
studentName = sName;
public void setAssignOne(double assignOne){
this.assignOne = assignOne;
public void setAssignTwo(double assignTwo){
this.assignTwo = assignTwo;
public void setAssignThree(double assignThree){
this.assignThree = assignThree;
public void setExamOneGrade(double examOneGrade){
this.examOneGrade = examOneGrade;
public void setExamTwoGrade(double examTwoGrade){
this.examTwoGrade = examTwoGrade;
public double getAverage(){
return (assignOne + assignTwo + assignThree)/3;
public double getExamAverage(){
return (examOneGrade + examTwoGrade)/2;
public double getTotalAverage(){
return (getAverage() + getExamAverage())/2;
this thread can be closed now. l8rz :P
Edited by: Jacal on Feb 10, 2008 7:28 AM -
I need help with a migration from Exchange 2010 to 2007
Hi All,
I need help migrating mailboxes from a separate forest / domain using exchange 2010 to our Exchange 2007 SP3 servers.. I am following this procedure:
1. On source server, create a mailbox user, test01.
2. On target server, run the following command to move the AD account:
Prepare-MoveRequest.Ps1 -Identity [email protected] -RemoteForestDomainController FQDN.source.com -RemoteForestCredential $Remote -LocalForestDomainController FQDN.target.com -LocalForestCredential $Local -UseLocalObject -Verbose"
3. Run the ADMT to migrate the password and SID history.
4. Run the following command to move the mailbox:
New-MoveRequest -Identity '[email protected]' -RemoteLegacy -RemoteTargetDatabase DB03 -RemoteGlobalCatalog 'GC01.humongousinsurance.com' -RemoteCredential $Cred -TargetDeliveryDomain 'mail.contoso.com'
(Changed all the details obviously)
It gets to 95% and shows this error
01/12/2014 12:47:24 [EX2K10] Fatal error UpdateMovedMailboxPermanentException has occurred.
Error details: An error occurred while updating a user object after the move operation. --> Active Directory operation failed on DC.DC.COM . This error is not retriable. Additional information: The parameter is incorrect.
Active directory response: 00000057: LdapErr: DSID-0C090A85, comment: Error in attribute conversion operation, data 0, vece --> The requested attribute does not exist.
at Microsoft.Exchange.MailboxReplicationService.LocalMailbox.Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox(UpdateMovedMailboxOperation op, ADUser remoteRecipientData, String domainController, ReportEntry[]& entries,
Guid newDatabaseGuid, Guid newArchiveDatabaseGuid, String archiveDomain, ArchiveStatusFlags archiveStatus)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.<>c__DisplayClass3c.<Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox>b__3b()
at Microsoft.Exchange.MailboxReplicationService.ExecutionContext.Execute(GenericCallDelegate operation)
at Microsoft.Exchange.MailboxReplicationService.MailboxWrapper.Microsoft.Exchange.MailboxReplicationService.IMailbox.UpdateMovedMailbox(UpdateMovedMailboxOperation op, ADUser remoteRecipientData, String domainController, ReportEntry[]& entries,
Guid newDatabaseGuid, Guid newArchiveDatabaseGuid, String archiveDomain, ArchiveStatusFlags archiveStatus)
at Microsoft.Exchange.MailboxReplicationService.RemoteMoveJob.UpdateMovedMailbox()
at Microsoft.Exchange.MailboxReplicationService.MoveBaseJob.UpdateAD(Object[] wiParams)
at Microsoft.Exchange.MailboxReplicationService.CommonUtils.CatchKnownExceptions(GenericCallDelegate del, FailureDelegate failureDelegate)
Error context: --------
Operation: IMailbox.UpdateMovedMailbox
OperationSide: Target
Primary (b5373e49-6a06-41f4-990e-27807c7a57f3)
01/12/2014 12:47:24 [EX2K10] Relinquishing job.
Any ideas what i can do about this?Hi,
From your description, I recommend you follow the steps below for troubleshooting:
Open the problematic user in AD and check the Email Address. Verify if you can open or edit the x400 address. If no, remove the x400 address and recreate it. If yes, ensure that the name is spelt correctly. After that, continue to move the mailbox and check
the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Hi
I recently bought the new I phone 5 unlocked and logged in with my friends apple Id to start the phone.Somehow when I was activating the phone,I chose one of my friend's number and now the iphone is having a verizon connection and also shows a number under contacts as "my number ********** ".
I have tried everything to remove the number but it won't go away.I think the number was associated to my friends apple Id and now this Verizon number has got a hold on my brand new phone.There is no sim in the phone right now.
I have reset the phone to factory settings a couple of times but the connection is still there.I would try to get a new sim and see if that can help but I was also concerned if my activity on facetime/i message is visible to my friend or anyone who can log in with my friend's apple ID.
Please help,Using the iphone for the first time and confused!!!
Thank you
Tarun10.7 is Lion.
Mountain Lion is 10.8.
You can likely get that if you like from the Mac App Store
If you need 10.7, then you can call the Apple Store 800 number.
Maybe you are looking for
-
Urgent - Error while executing the UCM component service
Hi, I am working on Oracle UCM 11g and created a component service by extending RevisionImplementor class. The service is created using the Component Wizard. I need to execute business logic and update the revision lable while submiiting the Check In
-
Adobe Illustrator CC: Schneiden von Pfaden an Schnittmenge
Hallo, ich habe lange recherchiert und auch in englischen Foren nichts gefunden, was mein Problem beheben konnte. Bevor ich mit Illustrator CC arbeitete, hatte ich die Version CS5. Hier funktionierte folgendes einwandfrei: Ich habe Pfade (auch in ver
-
Satellite A300 - S-video doesn't detect TV
Dear All Last week, I bought your new product: Toshiba Satellite A300 I liked its specifications specially the s-video output. When I reached my house, I connected it to my TV: Toshiba Bomba 29A3MJ http://www.toshiba-gulf.com/site/product/prd_details
-
Web redirect not working on MAC OS X WLC 5508
Hi, I have a problem with Mac OS X-users. When connecting to the guest-network, the Mac does not get redirected to the login-web. I have tried to manually type in the url and IP-adress to the login-page, but cannot reach it. It works with all other d
-
My HP printer software will not install. stated that it no longer supported PowerPC software
I have an HP 5610 All in one printer and while I can still print, I can no longer scan documents. The HP software cannot be re-installed due to a "Power PC" matter. It is no longer supported by Apple. Does this mean I have to buy a new printer.